I'm now seeing the following error on omap5 during boot:
(NULL device *): Failed to create dummy-scm_conf@0 debugfs directory
This is because we have two separate scm_conf syscon regions in the
dts. Let's fix the issue by setting a proper name if syscon is
configured via device tree.
See also related fix for commit 500f9ff518cf ("mfd: syscon: Set name
of regmap_config").
Cc: Jeffy Chen <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
---
drivers/mfd/syscon.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -241,6 +241,8 @@ static int syscon_probe(struct platform_device *pdev)
syscon_config.max_register = res->end - res->start - 3;
if (pdata)
syscon_config.name = pdata->label;
+ else
+ syscon_config.name = dev_name(dev);
syscon->regmap = devm_regmap_init_mmio(dev, base, &syscon_config);
if (IS_ERR(syscon->regmap)) {
dev_err(dev, "regmap init failed\n");
--
2.20.1
* Tony Lindgren <[email protected]> [190108 00:06]:
> I'm now seeing the following error on omap5 during boot:
>
> (NULL device *): Failed to create dummy-scm_conf@0 debugfs directory
>
> This is because we have two separate scm_conf syscon regions in the
> dts. Let's fix the issue by setting a proper name if syscon is
> configured via device tree.
>
> See also related fix for commit 500f9ff518cf ("mfd: syscon: Set name
> of regmap_config").
>
> Cc: Jeffy Chen <[email protected]>
> Signed-off-by: Tony Lindgren <[email protected]>
> ---
> drivers/mfd/syscon.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
> --- a/drivers/mfd/syscon.c
> +++ b/drivers/mfd/syscon.c
> @@ -241,6 +241,8 @@ static int syscon_probe(struct platform_device *pdev)
> syscon_config.max_register = res->end - res->start - 3;
> if (pdata)
> syscon_config.name = pdata->label;
> + else
> + syscon_config.name = dev_name(dev);
> syscon->regmap = devm_regmap_init_mmio(dev, base, &syscon_config);
> if (IS_ERR(syscon->regmap)) {
> dev_err(dev, "regmap init failed\n");
Hmm this fixes the error, but I'm still seeing only one
entry for /sys/kernel/debug/regmap/dummy-scm_conf@0.
Anybody got better ideas for setting the default name,
maybe dev->of_node->name if it exists?
Regards,
Tony
Hi Tony,
On 01/08/2019 08:15 AM, Tony Lindgren wrote:
> * Tony Lindgren <[email protected]> [190108 00:06]:
>> I'm now seeing the following error on omap5 during boot:
>>
>> (NULL device *): Failed to create dummy-scm_conf@0 debugfs directory
This log means failed to init regmap debugfs with device(NULL) and
name("scm_conf@0"), which likely to be called from of_syscon_register()
with np fullname("scm_conf@0").
So my guess would be there're more than one syscon dts nodes named
"scm_conf@0".
For omap5 and scm_conf@0, should be these 2:
https://elixir.bootlin.com/linux/latest/source/arch/arm/boot/dts/omap5.dtsi#L167
scm_conf: scm_conf@0 {
compatible = "syscon";
https://elixir.bootlin.com/linux/latest/source/arch/arm/boot/dts/omap5.dtsi#L313
scm_wkup_pad_conf: scm_conf@0 {
compatible = "syscon", "simple-bus";
Maybe try to rename one of them(for example, rename the second one to
"scm_wkup_pad_conf@0").
* JeffyChen <[email protected]> [190108 03:17]:
> Hi Tony,
>
> On 01/08/2019 08:15 AM, Tony Lindgren wrote:
> > * Tony Lindgren <[email protected]> [190108 00:06]:
> > > I'm now seeing the following error on omap5 during boot:
> > >
> > > (NULL device *): Failed to create dummy-scm_conf@0 debugfs directory
> This log means failed to init regmap debugfs with device(NULL) and
> name("scm_conf@0"), which likely to be called from of_syscon_register() with
> np fullname("scm_conf@0").
>
> So my guess would be there're more than one syscon dts nodes named
> "scm_conf@0".
Yup.
> For omap5 and scm_conf@0, should be these 2:
> https://elixir.bootlin.com/linux/latest/source/arch/arm/boot/dts/omap5.dtsi#L167
> scm_conf: scm_conf@0 {
> compatible = "syscon";
>
> https://elixir.bootlin.com/linux/latest/source/arch/arm/boot/dts/omap5.dtsi#L313
> scm_wkup_pad_conf: scm_conf@0 {
> compatible = "syscon", "simple-bus";
Yes those are the one.
> Maybe try to rename one of them(for example, rename the second one to
> "scm_wkup_pad_conf@0").
Well the thing is that any valid node name should work here
just like it does for devices. In this case the syscon
instances are on separate inteconnect instances. So it seems
that we should do something similar to what we already do in
of_device_make_bus_id().
BTW, I was trying to patch the wrong function :) The right
function to fix is of_syscon_register() for the dts case.
Regards,
Tony