LinuxLists.cc - khubd taking 100% CPU after unproperly removing USB webcam

2007-01-16 09:10:20

Subject: khubd taking 100% CPU after unproperly removing USB webcam

Hi,

I unplugged my (second) webcam, forgotting to stop ekiga, and khubd is
now taking 100% CPU.

- lsusb doesn't return
- /etc/init.d/udev restart didn't resolve the problem.

Is that a problem one may want to investigate or should I just forget
about it (problem being cause by a user error)?

Is there a way for me to:
- get more information about the problem ? I cannot strace not gdb
attach to the kernel process.
- solve the issue without restarting the computer
- should I do something particular before unplugging a USB device (on
windows there's this tray program to stop the USB device), should I
just run some sort of lsof on the device to check if it is safe to
remove it ?

Cheers,

Jerome

[Pleased keep me CC'ed]

DETAILS

> uname -a
Linux dolcevita 2.6.17-10-generic #2 SMP Tue Dec 5 22:28:26 UTC 2006
i686 GNU/Linux
> lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
Graphics Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:07.0 Serial controller: Rockwell International HCF 56k
Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
01:0c.0 Ethernet controller: Intel Corporation 82540EM Gigabit
Ethernet Controller (rev 02)

> dmesg
...
[17238199.732000] usb 3-1: new full speed USB device using uhci_hcd
and address 3
[17238199.924000] usb 3-1: configuration #1 chosen from 1 choice
[17238200.568000] drivers/media/video/spca5xx
/spca5xx-main.c : USB SPCA5XX camera found. Type Flexcam 100 (SPCA561A)
[17238200.576000] usbcore: registered new driver spca5xx
[17238200.576000] drivers/media/video/spca5xx/spca5xx-main.c: spca5xx
driver 00.57.08 registered
[17238225.180000 ] pwc Dumping frame 269.
[17238225.280000] pwc Dumping frame 270.
[17238225.380000] pwc Dumping frame 271.
[17238225.480000] pwc Dumping frame 272.
[17238225.580000] pwc Dumping frame 273.
[17238225.680000] pwc Dumping frame 274.
[17238225.780000] pwc Dumping frame 275.
[17238225.880000] pwc Dumping frame 276.
[17238225.980000] pwc Dumping frame 277.
[17238226.080000] pwc Dumping frame 278.
[17238226.180000] pwc Dumping frame 279.
[17238226.280000] pwc Dumping frame 280.
[17238230.680000] pwc Closing video device: 325 frames received,
dumped 12 frames, 0 frames with errors.
[17238231.996000] pwc type = 720
[17238232.000000] pwc type = 720
[17238232.000000] pwc set_video_mode(160x120 @ 10, palette 15).
[17238232.000000] pwc decode_size = 1.
[17238232.000000] pwc Using alternate setting 1.
[17238232.888000] pwc type = 720
[17238232.892000] pwc type = 720
[17238232.892000] pwc set_video_mode(160x120 @ 10, palette 15).
[17238232.892000] pwc decode_size = 1.
[17238232.892000] pwc Using alternate setting 1.
[17238233.468000] pwc type = 720
[17238233.472000] pwc type = 720
[17238233.472000] pwc set_video_mode(160x120 @ 10, palette 15).
[17238233.472000] pwc decode_size = 1.
[17238233.472000] pwc Using alternate setting 1.
[17238233.632000] pwc type = 720
[17238233.632000] pwc type = 720
[17238233.632000] pwc set_video_mode(160x120 @ 10, palette 15).
[17238233.632000] pwc decode_size = 1.
[17238233.632000] pwc Using alternate setting 1.
[17238233.992000] pwc type = 720
[17238233.996000] pwc type = 720
[17238233.996000] pwc set_video_mode(160x120 @ 10, palette 15).
[17238233.996000] pwc decode_size = 1.
[17238233.996000] pwc Using alternate setting 1.
[17238234.736000] pwc type = 720
[17238234.736000] pwc type = 720
[17238234.736000] pwc set_video_mode(160x120 @ 10, palette 15).
[17238234.736000] pwc decode_size = 1.
[17238234.736000] pwc Using alternate setting 1.
[17238446.704000] usb 3-1: USB disconnect, address 3
[17238446.704000] drivers/media/video/spca5xx/spca5xx-main.c:
usb_submit_urb() ret -19
[17238446.704000] drivers/media/video/spca5xx/spca5xx-main.c:
usb_submit_urb() ret -19

(note that the pwc camera is still plugged)

2007-01-16 09:17:28

by Oliver Neukum

[permalink] [raw]

Subject: Re: khubd taking 100% CPU after unproperly removing USB webcam

Am Dienstag, 16. Januar 2007 10:10 schrieb Jerome Lacoste:
> Hi,
>
> I unplugged my (second) webcam, forgotting to stop ekiga, and khubd is
> now taking 100% CPU.

You might start with mentioning which kind of camera your second webcam is.

Oliver

2007-01-16 09:46:32

by Oliver Neukum

[permalink] [raw]

Subject: Re: khubd taking 100% CPU after unproperly removing USB webcam

Am Dienstag, 16. Januar 2007 10:10 schrieb Jerome Lacoste:
> Hi,
>
> I unplugged my (second) webcam, forgotting to stop ekiga, and khubd is
> now taking 100% CPU.
>
> - lsusb doesn't return
> - /etc/init.d/udev restart didn't resolve the problem.
>
> Is that a problem one may want to investigate or should I just forget
> about it (problem being cause by a user error)?

If your are using this driver
http://mxhaard.free.fr/download.html

then it appears that it most likely hanging here:

for (n = 0; n < SPCA50X_NUMFRAMES; n++)
if (waitqueue_active(&spca50x->frame[n].wq))
wake_up_interruptible(&spca50x->frame[n].wq);
if (waitqueue_active(&spca50x->wq))
wake_up_interruptible(&spca50x->wq);
gspca_kill_transfert(spca50x);
PDEBUG(3, "Disconnect Kill isoc done");
up(&spca50x->lock);
while (spca50x->user)
schedule();

This driver's disconnect handling is buggy. As this is an out of tree
driver, please contact the original author.

Regards
Oliver

2007-01-16 10:03:43

by Jerome Lacoste

[permalink] [raw]

Subject: Re: khubd taking 100% CPU after unproperly removing USB webcam

On 1/16/07, Oliver Neukum <[email protected]> wrote:
> Am Dienstag, 16. Januar 2007 10:10 schrieb Jerome Lacoste:
> > Hi,
> >
> > I unplugged my (second) webcam, forgotting to stop ekiga, and khubd is
> > now taking 100% CPU.
> >
> > - lsusb doesn't return
> > - /etc/init.d/udev restart didn't resolve the problem.
> >
> > Is that a problem one may want to investigate or should I just forget
> > about it (problem being cause by a user error)?
>
> If your are using this driver
> http://mxhaard.free.fr/download.html
>
> then it appears that it most likely hanging here:
>
> for (n = 0; n < SPCA50X_NUMFRAMES; n++)
> if (waitqueue_active(&spca50x->frame[n].wq))
> wake_up_interruptible(&spca50x->frame[n].wq);
> if (waitqueue_active(&spca50x->wq))
> wake_up_interruptible(&spca50x->wq);
> gspca_kill_transfert(spca50x);
> PDEBUG(3, "Disconnect Kill isoc done");
> up(&spca50x->lock);
> while (spca50x->user)
> schedule();
>
> This driver's disconnect handling is buggy. As this is an out of tree
> driver, please contact the original author.

OK thanks for your answer.

I also found out that ekiga was still running. I killed it and that
stopped the hang.

Jerome