2022-02-14 20:12:58

by Srinivasa Rao Mandadapu

Subject: [PATCH v6 3/7] pinctrl: qcom: Update macro name to LPI specific

Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific.

Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 2f19ab4..3c15f80 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -40,7 +40,7 @@
#define LPI_GPIO_KEEPER 0x2
#define LPI_GPIO_PULL_UP 0x3
#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
-#define NO_SLEW -1
+#define LPI_NO_SLEW -1

#define LPI_FUNCTION(fname) \
[LPI_MUX_##fname] = { \
@@ -193,14 +193,14 @@ static const struct lpi_pingroup sm8250_groups[] = {
LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
- LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
- LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
- LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
- LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
+ LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _),
+ LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
+ LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
+ LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
- LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
- LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
+ LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
+ LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
};

static const struct lpi_function sm8250_functions[] = {
@@ -435,7 +435,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
}

slew_offset = g->slew_offset;
- if (slew_offset == NO_SLEW)
+ if (slew_offset == LPI_NO_SLEW)
break;

mutex_lock(&pctrl->slew_access_lock);
--
2.7.4

2022-02-19 09:33:25

by Stephen Boyd

Subject: Re: [PATCH v6 3/7] pinctrl: qcom: Update macro name to LPI specific

Quoting Srinivasa Rao Mandadapu (2022-02-14 07:19:50)
> Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific.

Is this to avoid NO_SLEW somewhere else?

>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---

Reviewed-by: Stephen Boyd <[email protected]>

2022-02-20 14:06:42

by Srinivasa Rao Mandadapu

Subject: Re: [PATCH v6 3/7] pinctrl: qcom: Update macro name to LPI specific

On 2/19/2022 8:06 AM, Stephen Boyd wrote:
Thanks for Your time Stephen!!!
> Quoting Srinivasa Rao Mandadapu (2022-02-14 07:19:50)
>> Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific.
> Is this to avoid NO_SLEW somewhere else?
The above comment addressed resent v7 patches.
>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>> Co-developed-by: Venkata Prasad Potturu <[email protected]>
>> Signed-off-by: Venkata Prasad Potturu <[email protected]>
>> ---
> Reviewed-by: Stephen Boyd <[email protected]>