This is the start of the stable review cycle for the 4.14.251 release.
There are 33 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 16 Oct 2021 14:51:59 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.251-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.251-rc1
Peter Zijlstra <[email protected]>
sched: Always inline is_percpu_thread()
Anand K Mistry <[email protected]>
perf/x86: Reset destroy callback on event init failure
Colin Ian King <[email protected]>
scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"
Jiapeng Chong <[email protected]>
scsi: ses: Fix unsigned comparison with less than zero
Randy Dunlap <[email protected]>
net: sun: SUNVNET_COMMON should depend on INET
Al Viro <[email protected]>
m68k: Handle arrivals of multiple signals correctly
YueHaibing <[email protected]>
mac80211: Drop frames from invalid MAC address in ad-hoc mode
Jeremy Sowden <[email protected]>
netfilter: ip6_tables: zero-initialize fragment offset
Mizuho Mori <[email protected]>
HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS
Florian Fainelli <[email protected]>
net: phy: bcm7xxx: Fixed indirect MMD operations
Jamie Iles <[email protected]>
i2c: acpi: fix resource leak in reconfiguration device addition
Jiri Benc <[email protected]>
i40e: fix endless loop under rtnl
Eric Dumazet <[email protected]>
rtnetlink: fix if_nlmsg_stats_size() under estimation
Yang Yingliang <[email protected]>
drm/nouveau/debugfs: fix file release memory leak
Eric Dumazet <[email protected]>
netlink: annotate data races around nlk->bound
Eric Dumazet <[email protected]>
net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size()
Oleksij Rempel <[email protected]>
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
Andy Shevchenko <[email protected]>
ptp_pch: Load module automatically if ID matches
Pali Rohár <[email protected]>
powerpc/fsl/dts: Fix phy-connection-type for fm1mac3
Eric Dumazet <[email protected]>
net_sched: fix NULL deref in fifo_set_limit()
Pavel Skripkin <[email protected]>
phy: mdio: fix memory leak
Tatsuhiko Yasumatsu <[email protected]>
bpf: Fix integer overflow in prealloc_elems_and_freelist()
Max Filippov <[email protected]>
xtensa: call irqchip_init only when CONFIG_USE_OF is selected
Piotr Krysiuk <[email protected]>
bpf, mips: Validate conditional branch offsets
Daniel Borkmann <[email protected]>
bpf: add also cbpf long jump test cases with heavy expansion
David Heidelberg <[email protected]>
ARM: dts: qcom: apq8064: use compatible which contains chipid
Roger Quadros <[email protected]>
ARM: dts: omap3430-sdp: Fix NAND device node
Juergen Gross <[email protected]>
xen/balloon: fix cancelled balloon action
Trond Myklebust <[email protected]>
nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
Zheng Liang <[email protected]>
ovl: fix missing negative dentry check in ovl_rename()
Johan Hovold <[email protected]>
USB: cdc-acm: fix break reporting
Johan Hovold <[email protected]>
USB: cdc-acm: fix racy tty buffer accesses
Ben Hutchings <[email protected]>
Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 3 +-
arch/arm/mach-imx/pm-imx6.c | 2 +
arch/m68k/kernel/signal.c | 88 +++++++++++++--------------
arch/mips/net/bpf_jit.c | 57 ++++++++++++-----
arch/powerpc/boot/dts/fsl/t1023rdb.dts | 2 +-
arch/x86/events/core.c | 1 +
arch/xtensa/kernel/irq.c | 2 +-
drivers/gpu/drm/nouveau/nouveau_debugfs.c | 1 +
drivers/hid/hid-apple.c | 7 +++
drivers/i2c/i2c-core-acpi.c | 1 +
drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
drivers/net/ethernet/sun/Kconfig | 1 +
drivers/net/phy/bcm7xxx.c | 94 +++++++++++++++++++++++++++++
drivers/net/phy/mdio_bus.c | 7 +++
drivers/ptp/ptp_pch.c | 1 +
drivers/scsi/ses.c | 2 +-
drivers/scsi/virtio_scsi.c | 4 +-
drivers/usb/Kconfig | 3 +-
drivers/usb/class/cdc-acm.c | 8 +++
drivers/xen/balloon.c | 21 +++++--
fs/nfsd/nfs4xdr.c | 19 +++---
fs/overlayfs/dir.c | 10 ++-
include/linux/sched.h | 2 +-
kernel/bpf/stackmap.c | 3 +-
lib/test_bpf.c | 63 +++++++++++++++++++
net/bridge/br_netlink.c | 2 +-
net/core/rtnetlink.c | 2 +-
net/ipv6/netfilter/ip6_tables.c | 1 +
net/mac80211/rx.c | 3 +-
net/netlink/af_netlink.c | 14 +++--
net/sched/sch_fifo.c | 3 +
33 files changed, 336 insertions(+), 99 deletions(-)
From: Al Viro <[email protected]>
[ Upstream commit 4bb0bd81ce5e97092dfda6a106d414b703ec0ee8 ]
When we have several pending signals, have entered with the kernel
with large exception frame *and* have already built at least one
sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc
are going to be junk - the real values are in shifted exception stack
frame we'd built when putting together the first sigframe.
If that happens, subsequent sigframes are going to be garbage.
Not hard to fix - just need to find the "adjusted" frame first
and look for format/vector/sr/pc in it.
Signed-off-by: Al Viro <[email protected]>
Tested-by: Michael Schmitz <[email protected]>
Reviewed-by: Michael Schmitz <[email protected]>
Tested-by: Finn Thain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/kernel/signal.c | 88 +++++++++++++++++++--------------------
1 file changed, 42 insertions(+), 46 deletions(-)
diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
index e79421f5b9cd..20a3ff41d0d5 100644
--- a/arch/m68k/kernel/signal.c
+++ b/arch/m68k/kernel/signal.c
@@ -448,7 +448,7 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
fpu_version = sc->sc_fpstate[0];
- if (CPU_IS_020_OR_030 &&
+ if (CPU_IS_020_OR_030 && !regs->stkadj &&
regs->vector >= (VEC_FPBRUC * 4) &&
regs->vector <= (VEC_FPNAN * 4)) {
/* Clear pending exception in 68882 idle frame */
@@ -511,7 +511,7 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *
if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
context_size = fpstate[1];
fpu_version = fpstate[0];
- if (CPU_IS_020_OR_030 &&
+ if (CPU_IS_020_OR_030 && !regs->stkadj &&
regs->vector >= (VEC_FPBRUC * 4) &&
regs->vector <= (VEC_FPNAN * 4)) {
/* Clear pending exception in 68882 idle frame */
@@ -765,18 +765,24 @@ badframe:
return 0;
}
+static inline struct pt_regs *rte_regs(struct pt_regs *regs)
+{
+ return (void *)regs + regs->stkadj;
+}
+
static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
unsigned long mask)
{
+ struct pt_regs *tregs = rte_regs(regs);
sc->sc_mask = mask;
sc->sc_usp = rdusp();
sc->sc_d0 = regs->d0;
sc->sc_d1 = regs->d1;
sc->sc_a0 = regs->a0;
sc->sc_a1 = regs->a1;
- sc->sc_sr = regs->sr;
- sc->sc_pc = regs->pc;
- sc->sc_formatvec = regs->format << 12 | regs->vector;
+ sc->sc_sr = tregs->sr;
+ sc->sc_pc = tregs->pc;
+ sc->sc_formatvec = tregs->format << 12 | tregs->vector;
save_a5_state(sc, regs);
save_fpu_state(sc, regs);
}
@@ -784,6 +790,7 @@ static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs)
{
struct switch_stack *sw = (struct switch_stack *)regs - 1;
+ struct pt_regs *tregs = rte_regs(regs);
greg_t __user *gregs = uc->uc_mcontext.gregs;
int err = 0;
@@ -804,9 +811,9 @@ static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *
err |= __put_user(sw->a5, &gregs[13]);
err |= __put_user(sw->a6, &gregs[14]);
err |= __put_user(rdusp(), &gregs[15]);
- err |= __put_user(regs->pc, &gregs[16]);
- err |= __put_user(regs->sr, &gregs[17]);
- err |= __put_user((regs->format << 12) | regs->vector, &uc->uc_formatvec);
+ err |= __put_user(tregs->pc, &gregs[16]);
+ err |= __put_user(tregs->sr, &gregs[17]);
+ err |= __put_user((tregs->format << 12) | tregs->vector, &uc->uc_formatvec);
err |= rt_save_fpu_state(uc, regs);
return err;
}
@@ -823,13 +830,14 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
struct sigframe __user *frame;
- int fsize = frame_extra_sizes(regs->format);
+ struct pt_regs *tregs = rte_regs(regs);
+ int fsize = frame_extra_sizes(tregs->format);
struct sigcontext context;
int err = 0, sig = ksig->sig;
if (fsize < 0) {
pr_debug("setup_frame: Unknown frame format %#x\n",
- regs->format);
+ tregs->format);
return -EFAULT;
}
@@ -840,7 +848,7 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set,
err |= __put_user(sig, &frame->sig);
- err |= __put_user(regs->vector, &frame->code);
+ err |= __put_user(tregs->vector, &frame->code);
err |= __put_user(&frame->sc, &frame->psc);
if (_NSIG_WORDS > 1)
@@ -865,34 +873,28 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set,
push_cache ((unsigned long) &frame->retcode);
- /*
- * Set up registers for signal handler. All the state we are about
- * to destroy is successfully copied to sigframe.
- */
- wrusp ((unsigned long) frame);
- regs->pc = (unsigned long) ksig->ka.sa.sa_handler;
- adjustformat(regs);
-
/*
* This is subtle; if we build more than one sigframe, all but the
* first one will see frame format 0 and have fsize == 0, so we won't
* screw stkadj.
*/
- if (fsize)
+ if (fsize) {
regs->stkadj = fsize;
-
- /* Prepare to skip over the extra stuff in the exception frame. */
- if (regs->stkadj) {
- struct pt_regs *tregs =
- (struct pt_regs *)((ulong)regs + regs->stkadj);
+ tregs = rte_regs(regs);
pr_debug("Performing stackadjust=%04lx\n", regs->stkadj);
- /* This must be copied with decreasing addresses to
- handle overlaps. */
tregs->vector = 0;
tregs->format = 0;
- tregs->pc = regs->pc;
tregs->sr = regs->sr;
}
+
+ /*
+ * Set up registers for signal handler. All the state we are about
+ * to destroy is successfully copied to sigframe.
+ */
+ wrusp ((unsigned long) frame);
+ tregs->pc = (unsigned long) ksig->ka.sa.sa_handler;
+ adjustformat(regs);
+
return 0;
}
@@ -900,7 +902,8 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
- int fsize = frame_extra_sizes(regs->format);
+ struct pt_regs *tregs = rte_regs(regs);
+ int fsize = frame_extra_sizes(tregs->format);
int err = 0, sig = ksig->sig;
if (fsize < 0) {
@@ -949,34 +952,27 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
push_cache ((unsigned long) &frame->retcode);
- /*
- * Set up registers for signal handler. All the state we are about
- * to destroy is successfully copied to sigframe.
- */
- wrusp ((unsigned long) frame);
- regs->pc = (unsigned long) ksig->ka.sa.sa_handler;
- adjustformat(regs);
-
/*
* This is subtle; if we build more than one sigframe, all but the
* first one will see frame format 0 and have fsize == 0, so we won't
* screw stkadj.
*/
- if (fsize)
+ if (fsize) {
regs->stkadj = fsize;
-
- /* Prepare to skip over the extra stuff in the exception frame. */
- if (regs->stkadj) {
- struct pt_regs *tregs =
- (struct pt_regs *)((ulong)regs + regs->stkadj);
+ tregs = rte_regs(regs);
pr_debug("Performing stackadjust=%04lx\n", regs->stkadj);
- /* This must be copied with decreasing addresses to
- handle overlaps. */
tregs->vector = 0;
tregs->format = 0;
- tregs->pc = regs->pc;
tregs->sr = regs->sr;
}
+
+ /*
+ * Set up registers for signal handler. All the state we are about
+ * to destroy is successfully copied to sigframe.
+ */
+ wrusp ((unsigned long) frame);
+ tregs->pc = (unsigned long) ksig->ka.sa.sa_handler;
+ adjustformat(regs);
return 0;
}
--
2.33.0
From: Mizuho Mori <[email protected]>
[ Upstream commit 67fd71ba16a37c663d139f5ba5296f344d80d072 ]
Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong.
Below is a report descriptor.
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x06, /* Usage (Keyboard), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x01, /* Report ID (1), */
0x05, 0x07, /* Usage Page (Keyboard), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */
0x29, 0xE7, /* Usage Maximum (KB Right GUI), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x08, /* Report Count (8), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x05, /* Report Count (5), */
0x75, 0x01, /* Report Size (1), */
0x05, 0x08, /* Usage Page (LED), */
0x19, 0x01, /* Usage Minimum (01h), */
0x29, 0x05, /* Usage Maximum (05h), */
0x91, 0x02, /* Output (Variable), */
0x95, 0x01, /* Report Count (1), */
0x75, 0x03, /* Report Size (3), */
0x91, 0x03, /* Output (Constant, Variable), */
0x95, 0x08, /* Report Count (8), */
0x75, 0x01, /* Report Size (1), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
here is a report descriptor which is parsed one in kernel.
see sys/kernel/debug/hid/<dev>/rdesc
05 01 09 06 a1 01 85 01 05 07
15 00 25 01 19 e0 29 e7 75 01
95 08 81 02 95 05 75 01 05 08
19 01 29 05 91 02 95 01 75 03
91 03 95 08 75 01 15 00 25 01
06 00 ff 09 03 81 03 95 06 75
08 15 00 25 [65] 05 07 19 00 29
[65] 81 00 95 01 75 01 15 00 25
01 05 0c 09 b8 81 02 95 01 75
01 06 01 ff 09 03 81 02 95 01
75 06 81 03 06 02 ff 09 55 85
55 15 00 26 ff 00 75 08 95 40
b1 a2 c0 06 00 ff 09 14 a1 01
85 90 05 84 75 01 95 03 15 00
25 01 09 61 05 85 09 44 09 46
81 02 95 05 81 01 75 08 95 01
15 00 26 ff 00 09 65 81 02 c0
00
Position 64(Logical Maximum) and 70(Usage Maximum) are 101.
Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support.
position 117 is also 101 but not related(it is Usage 65h).
There are no difference of product id between JIS and ANSI.
They are same 0x0267.
Signed-off-by: Mizuho Mori <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-apple.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index b58ab769aa7b..4e3dd3f55a96 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -304,12 +304,19 @@ static int apple_event(struct hid_device *hdev, struct hid_field *field,
/*
* MacBook JIS keyboard has wrong logical maximum
+ * Magic Keyboard JIS has wrong logical maximum
*/
static __u8 *apple_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
struct apple_sc *asc = hid_get_drvdata(hdev);
+ if(*rsize >=71 && rdesc[70] == 0x65 && rdesc[64] == 0x65) {
+ hid_info(hdev,
+ "fixing up Magic Keyboard JIS report descriptor\n");
+ rdesc[64] = rdesc[70] = 0xe7;
+ }
+
if ((asc->quirks & APPLE_RDESC_JIS) && *rsize >= 60 &&
rdesc[53] == 0x65 && rdesc[59] == 0x65) {
hid_info(hdev,
--
2.33.0
From: YueHaibing <[email protected]>
[ Upstream commit a6555f844549cd190eb060daef595f94d3de1582 ]
WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554
sta_info_insert_rcu+0x121/0x12a0
Modules linked in:
CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253
Workqueue: phy3 ieee80211_iface_work
RIP: 0010:sta_info_insert_rcu+0x121/0x12a0
...
Call Trace:
ieee80211_ibss_finish_sta+0xbc/0x170
ieee80211_ibss_work+0x13f/0x7d0
ieee80211_iface_work+0x37a/0x500
process_one_work+0x357/0x850
worker_thread+0x41/0x4d0
If an Ad-Hoc node receives packets with invalid source MAC address,
it hits a WARN_ON in sta_info_insert_check(), this can spam the log.
Signed-off-by: YueHaibing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 87926c6fe0bf..cbe1177d95f9 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3714,7 +3714,8 @@ static bool ieee80211_accept_frame(struct ieee80211_rx_data *rx)
if (!bssid)
return false;
if (ether_addr_equal(sdata->vif.addr, hdr->addr2) ||
- ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2))
+ ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2) ||
+ !is_valid_ether_addr(hdr->addr2))
return false;
if (ieee80211_is_beacon(hdr->frame_control))
return true;
--
2.33.0
From: Piotr Krysiuk <[email protected]>
commit 37cb28ec7d3a36a5bace7063a3dba633ab110f8b upstream.
The conditional branch instructions on MIPS use 18-bit signed offsets
allowing for a branch range of 128 KBytes (backward and forward).
However, this limit is not observed by the cBPF JIT compiler, and so
the JIT compiler emits out-of-range branches when translating certain
cBPF programs. A specific example of such a cBPF program is included in
the "BPF_MAXINSNS: exec all MSH" test from lib/test_bpf.c that executes
anomalous machine code containing incorrect branch offsets under JIT.
Furthermore, this issue can be abused to craft undesirable machine
code, where the control flow is hijacked to execute arbitrary Kernel
code.
The following steps can be used to reproduce the issue:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_name="BPF_MAXINSNS: exec all MSH"
This should produce multiple warnings from build_bimm() similar to:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 209 at arch/mips/mm/uasm-mips.c:210 build_insn+0x558/0x590
Micro-assembler field overflow
Modules linked in: test_bpf(+)
CPU: 0 PID: 209 Comm: modprobe Not tainted 5.14.3 #1
Stack : 00000000 807bb824 82b33c9c 801843c0 00000000 00000004 00000000 63c9b5ee
82b33af4 80999898 80910000 80900000 82fd6030 00000001 82b33a98 82087180
00000000 00000000 80873b28 00000000 000000fc 82b3394c 00000000 2e34312e
6d6d6f43 809a180f 809a1836 6f6d203a 80900000 00000001 82b33bac 80900000
00027f80 00000000 00000000 807bb824 00000000 804ed790 001cc317 00000001
[...]
Call Trace:
[<80108f44>] show_stack+0x38/0x118
[<807a7aac>] dump_stack_lvl+0x5c/0x7c
[<807a4b3c>] __warn+0xcc/0x140
[<807a4c3c>] warn_slowpath_fmt+0x8c/0xb8
[<8011e198>] build_insn+0x558/0x590
[<8011e358>] uasm_i_bne+0x20/0x2c
[<80127b48>] build_body+0xa58/0x2a94
[<80129c98>] bpf_jit_compile+0x114/0x1e4
[<80613fc4>] bpf_prepare_filter+0x2ec/0x4e4
[<8061423c>] bpf_prog_create+0x80/0xc4
[<c0a006e4>] test_bpf_init+0x300/0xba8 [test_bpf]
[<8010051c>] do_one_initcall+0x50/0x1d4
[<801c5e54>] do_init_module+0x60/0x220
[<801c8b20>] sys_finit_module+0xc4/0xfc
[<801144d0>] syscall_common+0x34/0x58
[...]
---[ end trace a287d9742503c645 ]---
Then the anomalous machine code executes:
=> 0xc0a18000: addiu sp,sp,-16
0xc0a18004: sw s3,0(sp)
0xc0a18008: sw s4,4(sp)
0xc0a1800c: sw s5,8(sp)
0xc0a18010: sw ra,12(sp)
0xc0a18014: move s5,a0
0xc0a18018: move s4,zero
0xc0a1801c: move s3,zero
# __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
0xc0a18020: lui t6,0x8012
0xc0a18024: ori t4,t6,0x9e14
0xc0a18028: li a1,0
0xc0a1802c: jalr t4
0xc0a18030: move a0,s5
0xc0a18034: bnez v0,0xc0a1ffb8 # incorrect branch offset
0xc0a18038: move v0,zero
0xc0a1803c: andi s4,s3,0xf
0xc0a18040: b 0xc0a18048
0xc0a18044: sll s4,s4,0x2
[...]
# __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
0xc0a1ffa0: lui t6,0x8012
0xc0a1ffa4: ori t4,t6,0x9e14
0xc0a1ffa8: li a1,0
0xc0a1ffac: jalr t4
0xc0a1ffb0: move a0,s5
0xc0a1ffb4: bnez v0,0xc0a1ffb8 # incorrect branch offset
0xc0a1ffb8: move v0,zero
0xc0a1ffbc: andi s4,s3,0xf
0xc0a1ffc0: b 0xc0a1ffc8
0xc0a1ffc4: sll s4,s4,0x2
# __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
0xc0a1ffc8: lui t6,0x8012
0xc0a1ffcc: ori t4,t6,0x9e14
0xc0a1ffd0: li a1,0
0xc0a1ffd4: jalr t4
0xc0a1ffd8: move a0,s5
0xc0a1ffdc: bnez v0,0xc0a3ffb8 # correct branch offset
0xc0a1ffe0: move v0,zero
0xc0a1ffe4: andi s4,s3,0xf
0xc0a1ffe8: b 0xc0a1fff0
0xc0a1ffec: sll s4,s4,0x2
[...]
# epilogue
0xc0a3ffb8: lw s3,0(sp)
0xc0a3ffbc: lw s4,4(sp)
0xc0a3ffc0: lw s5,8(sp)
0xc0a3ffc4: lw ra,12(sp)
0xc0a3ffc8: addiu sp,sp,16
0xc0a3ffcc: jr ra
0xc0a3ffd0: nop
To mitigate this issue, we assert the branch ranges for each emit call
that could generate an out-of-range branch.
Fixes: 36366e367ee9 ("MIPS: BPF: Restore MIPS32 cBPF JIT")
Fixes: c6610de353da ("MIPS: net: Add BPF JIT")
Signed-off-by: Piotr Krysiuk <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Johan Almbladh <[email protected]>
Acked-by: Johan Almbladh <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Ovidiu Panait <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/net/bpf_jit.c | 57 ++++++++++++++++++++++++++++++++++++------------
1 file changed, 43 insertions(+), 14 deletions(-)
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -662,6 +662,11 @@ static void build_epilogue(struct jit_ct
((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \
func##_positive)
+static bool is_bad_offset(int b_off)
+{
+ return b_off > 0x1ffff || b_off < -0x20000;
+}
+
static int build_body(struct jit_ctx *ctx)
{
const struct bpf_prog *prog = ctx->skf;
@@ -728,7 +733,10 @@ load_common:
/* Load return register on DS for failures */
emit_reg_move(r_ret, r_zero, ctx);
/* Return with error */
- emit_b(b_imm(prog->len, ctx), ctx);
+ b_off = b_imm(prog->len, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_b(b_off, ctx);
emit_nop(ctx);
break;
case BPF_LD | BPF_W | BPF_IND:
@@ -775,8 +783,10 @@ load_ind:
emit_jalr(MIPS_R_RA, r_s0, ctx);
emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */
/* Check the error value */
- emit_bcond(MIPS_COND_NE, r_ret, 0,
- b_imm(prog->len, ctx), ctx);
+ b_off = b_imm(prog->len, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_bcond(MIPS_COND_NE, r_ret, 0, b_off, ctx);
emit_reg_move(r_ret, r_zero, ctx);
/* We are good */
/* X <- P[1:K] & 0xf */
@@ -855,8 +865,10 @@ load_ind:
/* A /= X */
ctx->flags |= SEEN_X | SEEN_A;
/* Check if r_X is zero */
- emit_bcond(MIPS_COND_EQ, r_X, r_zero,
- b_imm(prog->len, ctx), ctx);
+ b_off = b_imm(prog->len, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_bcond(MIPS_COND_EQ, r_X, r_zero, b_off, ctx);
emit_load_imm(r_ret, 0, ctx); /* delay slot */
emit_div(r_A, r_X, ctx);
break;
@@ -864,8 +876,10 @@ load_ind:
/* A %= X */
ctx->flags |= SEEN_X | SEEN_A;
/* Check if r_X is zero */
- emit_bcond(MIPS_COND_EQ, r_X, r_zero,
- b_imm(prog->len, ctx), ctx);
+ b_off = b_imm(prog->len, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_bcond(MIPS_COND_EQ, r_X, r_zero, b_off, ctx);
emit_load_imm(r_ret, 0, ctx); /* delay slot */
emit_mod(r_A, r_X, ctx);
break;
@@ -926,7 +940,10 @@ load_ind:
break;
case BPF_JMP | BPF_JA:
/* pc += K */
- emit_b(b_imm(i + k + 1, ctx), ctx);
+ b_off = b_imm(i + k + 1, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_b(b_off, ctx);
emit_nop(ctx);
break;
case BPF_JMP | BPF_JEQ | BPF_K:
@@ -1056,12 +1073,16 @@ jmp_cmp:
break;
case BPF_RET | BPF_A:
ctx->flags |= SEEN_A;
- if (i != prog->len - 1)
+ if (i != prog->len - 1) {
/*
* If this is not the last instruction
* then jump to the epilogue
*/
- emit_b(b_imm(prog->len, ctx), ctx);
+ b_off = b_imm(prog->len, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_b(b_off, ctx);
+ }
emit_reg_move(r_ret, r_A, ctx); /* delay slot */
break;
case BPF_RET | BPF_K:
@@ -1075,7 +1096,10 @@ jmp_cmp:
* If this is not the last instruction
* then jump to the epilogue
*/
- emit_b(b_imm(prog->len, ctx), ctx);
+ b_off = b_imm(prog->len, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_b(b_off, ctx);
emit_nop(ctx);
}
break;
@@ -1133,8 +1157,10 @@ jmp_cmp:
/* Load *dev pointer */
emit_load_ptr(r_s0, r_skb, off, ctx);
/* error (0) in the delay slot */
- emit_bcond(MIPS_COND_EQ, r_s0, r_zero,
- b_imm(prog->len, ctx), ctx);
+ b_off = b_imm(prog->len, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_bcond(MIPS_COND_EQ, r_s0, r_zero, b_off, ctx);
emit_reg_move(r_ret, r_zero, ctx);
if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
@@ -1244,7 +1270,10 @@ void bpf_jit_compile(struct bpf_prog *fp
/* Generate the actual JIT code */
build_prologue(&ctx);
- build_body(&ctx);
+ if (build_body(&ctx)) {
+ module_memfree(ctx.target);
+ goto out;
+ }
build_epilogue(&ctx);
/* Update the icache */
From: Oleksij Rempel <[email protected]>
[ Upstream commit 783f3db030563f7bcdfe2d26428af98ea1699a8e ]
Any pending interrupt can prevent entering standby based power off state.
To avoid it, disable the GIC CPU interface.
Fixes: 8148d2136002 ("ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set")
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-imx/pm-imx6.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index c7dcb0b20730..5182b04ac878 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -15,6 +15,7 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/genalloc.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of.h>
@@ -608,6 +609,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
static void imx6_pm_stby_poweroff(void)
{
+ gic_cpu_if_down(0);
imx6_set_lpm(STOP_POWER_OFF);
imx6q_suspend_finish(0);
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit 7707a4d01a648e4c655101a469c956cb11273655 ]
While existing code is correct, KCSAN is reporting
a data-race in netlink_insert / netlink_sendmsg [1]
It is correct to read nlk->bound without a lock, as netlink_autobind()
will acquire all needed locks.
[1]
BUG: KCSAN: data-race in netlink_insert / netlink_sendmsg
write to 0xffff8881031c8b30 of 1 bytes by task 18752 on cpu 0:
netlink_insert+0x5cc/0x7f0 net/netlink/af_netlink.c:597
netlink_autobind+0xa9/0x150 net/netlink/af_netlink.c:842
netlink_sendmsg+0x479/0x7c0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:703 [inline]
sock_sendmsg net/socket.c:723 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
___sys_sendmsg net/socket.c:2446 [inline]
__sys_sendmsg+0x1ed/0x270 net/socket.c:2475
__do_sys_sendmsg net/socket.c:2484 [inline]
__se_sys_sendmsg net/socket.c:2482 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2482
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff8881031c8b30 of 1 bytes by task 18751 on cpu 1:
netlink_sendmsg+0x270/0x7c0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:703 [inline]
sock_sendmsg net/socket.c:723 [inline]
__sys_sendto+0x2a8/0x370 net/socket.c:2019
__do_sys_sendto net/socket.c:2031 [inline]
__se_sys_sendto net/socket.c:2027 [inline]
__x64_sys_sendto+0x74/0x90 net/socket.c:2027
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 18751 Comm: syz-executor.0 Not tainted 5.14.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: da314c9923fe ("netlink: Replace rhash_portid with bound")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netlink/af_netlink.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 955041c54702..d1fd9f7c867e 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -567,7 +567,10 @@ static int netlink_insert(struct sock *sk, u32 portid)
/* We need to ensure that the socket is hashed and visible. */
smp_wmb();
- nlk_sk(sk)->bound = portid;
+ /* Paired with lockless reads from netlink_bind(),
+ * netlink_connect() and netlink_sendmsg().
+ */
+ WRITE_ONCE(nlk_sk(sk)->bound, portid);
err:
release_sock(sk);
@@ -986,7 +989,8 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr,
else if (nlk->ngroups < 8*sizeof(groups))
groups &= (1UL << nlk->ngroups) - 1;
- bound = nlk->bound;
+ /* Paired with WRITE_ONCE() in netlink_insert() */
+ bound = READ_ONCE(nlk->bound);
if (bound) {
/* Ensure nlk->portid is up-to-date. */
smp_rmb();
@@ -1072,8 +1076,9 @@ static int netlink_connect(struct socket *sock, struct sockaddr *addr,
/* No need for barriers here as we return to user-space without
* using any of the bound attributes.
+ * Paired with WRITE_ONCE() in netlink_insert().
*/
- if (!nlk->bound)
+ if (!READ_ONCE(nlk->bound))
err = netlink_autobind(sock);
if (err == 0) {
@@ -1839,7 +1844,8 @@ static int netlink_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
dst_group = nlk->dst_group;
}
- if (!nlk->bound) {
+ /* Paired with WRITE_ONCE() in netlink_insert() */
+ if (!READ_ONCE(nlk->bound)) {
err = netlink_autobind(sock);
if (err)
goto out;
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit f5a8703a9c418c6fc54eb772712dfe7641e3991c ]
When using single_open() for opening, single_release() should be
called, otherwise the 'op' allocated in single_open() will be leaked.
Fixes: 6e9fc177399f ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_debugfs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.c b/drivers/gpu/drm/nouveau/nouveau_debugfs.c
index 4561a786fab0..cce4833a6083 100644
--- a/drivers/gpu/drm/nouveau/nouveau_debugfs.c
+++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.c
@@ -185,6 +185,7 @@ static const struct file_operations nouveau_pstate_fops = {
.open = nouveau_debugfs_pstate_open,
.read = seq_read,
.write = nouveau_debugfs_pstate_set,
+ .release = single_release,
};
static struct drm_info_list nouveau_debugfs_list[] = {
--
2.33.0
From: Pali Rohár <[email protected]>
[ Upstream commit eed183abc0d3b8adb64fd1363b7cea7986cd58d6 ]
Property phy-connection-type contains invalid value "sgmii-2500" per scheme
defined in file ethernet-controller.yaml.
Correct phy-connection-type value should be "2500base-x".
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)")
Acked-by: Scott Wood <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/dts/fsl/t1023rdb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
index 5ba6fbfca274..f82f85c65964 100644
--- a/arch/powerpc/boot/dts/fsl/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -154,7 +154,7 @@
fm1mac3: ethernet@e4000 {
phy-handle = <&sgmii_aqr_phy3>;
- phy-connection-type = "sgmii-2500";
+ phy-connection-type = "2500base-x";
sleep = <&rcpm 0x20000000>;
};
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit dbe0b88064494b7bb6a9b2aa7e085b14a3112d44 ]
bridge_fill_linkxstats() is using nla_reserve_64bit().
We must use nla_total_size_64bit() instead of nla_total_size()
for corresponding data structure.
Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Nikolay Aleksandrov <[email protected]>
Cc: Vivien Didelot <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/br_netlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 08190db0a2dc..79e306ec1416 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -1437,7 +1437,7 @@ static size_t br_get_linkxstats_size(const struct net_device *dev, int attr)
}
return numvls * nla_total_size(sizeof(struct bridge_vlan_xstats)) +
- nla_total_size(sizeof(struct br_mcast_stats)) +
+ nla_total_size_64bit(sizeof(struct br_mcast_stats)) +
nla_total_size(0);
}
--
2.33.0
From: Ben Hutchings <[email protected]>
commit 4d1aa9112c8e6995ef2c8a76972c9671332ccfea upstream.
This reverts commit cb9c1cfc86926d0e86d19c8e34f6c23458cd3478 for
USB_LED_TRIG. This config symbol has bool type and enables extra code
in usb_common itself, not a separate driver. Enabling it should not
force usb_common to be built-in!
Fixes: cb9c1cfc8692 ("usb: Kconfig: using select for USB_COMMON dependency")
Cc: stable <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Salvatore Bonaccorso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/Kconfig | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -174,8 +174,7 @@ source "drivers/usb/typec/Kconfig"
config USB_LED_TRIG
bool "USB LED Triggers"
- depends on LEDS_CLASS && LEDS_TRIGGERS
- select USB_COMMON
+ depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
help
This option adds LED triggers for USB host and/or gadget activity.
From: Eric Dumazet <[email protected]>
[ Upstream commit 560ee196fe9e5037e5015e2cdb14b3aecb1cd7dc ]
syzbot reported another NULL deref in fifo_set_limit() [1]
I could repro the issue with :
unshare -n
tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit
tc qd replace dev lo parent 1:0 pfifo_fast
tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit
pfifo_fast does not have a change() operation.
Make fifo_set_limit() more robust about this.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000
RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910
R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800
FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
fifo_set_limit net/sched/sch_fifo.c:242 [inline]
fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227
tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418
qdisc_change net/sched/sch_api.c:1332 [inline]
tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
___sys_sendmsg+0xf3/0x170 net/socket.c:2463
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: fb0305ce1b03 ("net-sched: consolidate default fifo qdisc setup")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_fifo.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/sched/sch_fifo.c b/net/sched/sch_fifo.c
index 1e37247656f8..8b7110cbcce4 100644
--- a/net/sched/sch_fifo.c
+++ b/net/sched/sch_fifo.c
@@ -151,6 +151,9 @@ int fifo_set_limit(struct Qdisc *q, unsigned int limit)
if (strncmp(q->ops->id + 1, "fifo", 4) != 0)
return 0;
+ if (!q->ops->change)
+ return 0;
+
nla = kmalloc(nla_attr_size(sizeof(struct tc_fifo_qopt)), GFP_KERNEL);
if (nla) {
nla->nla_type = RTM_NEWQDISC;
--
2.33.0
From: Andy Shevchenko <[email protected]>
[ Upstream commit 7cd8b1542a7ba0720c5a0a85ed414a122015228b ]
The driver can't be loaded automatically because it misses
module alias to be provided. Add corresponding MODULE_DEVICE_TABLE()
call to the driver.
Fixes: 863d08ece9bf ("supports eg20t ptp clock")
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_pch.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ptp/ptp_pch.c b/drivers/ptp/ptp_pch.c
index b3285175f20f..8461d7f92d31 100644
--- a/drivers/ptp/ptp_pch.c
+++ b/drivers/ptp/ptp_pch.c
@@ -698,6 +698,7 @@ static const struct pci_device_id pch_ieee1588_pcidev_id[] = {
},
{0}
};
+MODULE_DEVICE_TABLE(pci, pch_ieee1588_pcidev_id);
static struct pci_driver pch_driver = {
.name = KBUILD_MODNAME,
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit d34367991933d28bd7331f67a759be9a8c474014 ]
rtnl_fill_statsinfo() is filling skb with one mandatory if_stats_msg structure.
nlmsg_put(skb, pid, seq, type, sizeof(struct if_stats_msg), flags);
But if_nlmsg_stats_size() never considered the needed storage.
This bug did not show up because alloc_skb(X) allocates skb with
extra tailroom, because of added alignments. This could very well
be changed in the future to have deterministic behavior.
Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Roopa Prabhu <[email protected]>
Acked-by: Roopa Prabhu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/rtnetlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 3bcaecc7ba69..d7e2cb7ae1fa 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -4053,7 +4053,7 @@ nla_put_failure:
static size_t if_nlmsg_stats_size(const struct net_device *dev,
u32 filter_mask)
{
- size_t size = 0;
+ size_t size = NLMSG_ALIGN(sizeof(struct if_stats_msg));
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_64, 0))
size += nla_total_size_64bit(sizeof(struct rtnl_link_stats64));
--
2.33.0
From: Roger Quadros <[email protected]>
commit 80d680fdccba214e8106dc1aa33de5207ad75394 upstream.
Nand is on CS1 so reg properties first field should be 1 not 0.
Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes")
Cc: [email protected] # v4.6+
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -104,7 +104,7 @@
nand@1,0 {
compatible = "ti,omap2-nand";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
From: Johan Hovold <[email protected]>
commit 58fc1daa4d2e9789b9ffc880907c961ea7c062cc upstream.
A recent change that started reporting break events forgot to push the
event to the line discipline, which meant that a detected break would
not be reported until further characters had been receive (the port
could even have been closed and reopened in between).
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: [email protected]
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -351,6 +351,9 @@ static void acm_process_notification(str
acm->iocount.overrun++;
spin_unlock(&acm->read_lock);
+ if (newctrl & ACM_CTRL_BRK)
+ tty_flip_buffer_push(&acm->port);
+
if (difference)
wake_up_all(&acm->wioctl);
From: David Heidelberg <[email protected]>
commit f5c03f131dae3f06d08464e6157dd461200f78d9 upstream.
Also resolves these kernel warnings for APQ8064:
adreno 4300000.adreno-3xx: Using legacy qcom,chipid binding!
adreno 4300000.adreno-3xx: Use compatible qcom,adreno-320.2 instead.
Tested on Nexus 7 2013, no functional changes.
Cc: <[email protected]>
Signed-off-by: David Heidelberg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1114,7 +1114,7 @@
};
gpu: adreno-3xx@4300000 {
- compatible = "qcom,adreno-3xx";
+ compatible = "qcom,adreno-320.2", "qcom,adreno";
reg = <0x04300000 0x20000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 80 0>;
@@ -1129,7 +1129,6 @@
<&mmcc GFX3D_AHB_CLK>,
<&mmcc GFX3D_AXI_CLK>,
<&mmcc MMSS_IMEM_AHB_CLK>;
- qcom,chipid = <0x03020002>;
iommus = <&gfx3d 0
&gfx3d 1
From: Anand K Mistry <[email protected]>
[ Upstream commit 02d029a41dc986e2d5a77ecca45803857b346829 ]
perf_init_event tries multiple init callbacks and does not reset the
event state between tries. When x86_pmu_event_init runs, it
unconditionally sets the destroy callback to hw_perf_event_destroy. On
the next init attempt after x86_pmu_event_init, in perf_try_init_event,
if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy
callback will be run. However, if the next init didn't set the destroy
callback, hw_perf_event_destroy will be run (since the callback wasn't
reset).
Looking at other pmu init functions, the common pattern is to only set
the destroy callback on a successful init. Resetting the callback on
failure tries to replicate that pattern.
This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend
PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second)
run of the perf tool after a reboot results in 0 samples being
generated. The extra run of hw_perf_event_destroy results in
active_events having an extra decrement on each perf run. The second run
has active_events == 0 and every subsequent run has active_events < 0.
When active_events == 0, the NMI handler will early-out and not record
any samples.
Signed-off-by: Anand K Mistry <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index c1f7b3cb84a9..39c298afa2ea 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -2094,6 +2094,7 @@ static int x86_pmu_event_init(struct perf_event *event)
if (err) {
if (event->destroy)
event->destroy(event);
+ event->destroy = NULL;
}
if (ACCESS_ONCE(x86_pmu.attr_rdpmc))
--
2.33.0
From: Colin Ian King <[email protected]>
[ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ]
There are a couple of spelling mistakes in pr_info and pr_err messages.
Fix them.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/virtio_scsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 1f4bd7d0154d..2839701ffab5 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -336,7 +336,7 @@ static void virtscsi_handle_transport_reset(struct virtio_scsi *vscsi,
}
break;
default:
- pr_info("Unsupport virtio scsi event reason %x\n", event->reason);
+ pr_info("Unsupported virtio scsi event reason %x\n", event->reason);
}
}
@@ -389,7 +389,7 @@ static void virtscsi_handle_event(struct work_struct *work)
virtscsi_handle_param_change(vscsi, event);
break;
default:
- pr_err("Unsupport virtio scsi event %x\n", event->event);
+ pr_err("Unsupported virtio scsi event %x\n", event->event);
}
virtscsi_kick_event(vscsi, event_node);
}
--
2.33.0
On 2021/10/14 22:53, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.251 release.
> There are 33 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 16 Oct 2021 14:51:59 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.251-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on x86 for 4.14.251-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.14.y
Version: 4.14.251-rc1
Commit: cb9eaf51f06b404d5f807e408e9443f078355002
Compiler: gcc version 7.3.0 (GCC)
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8837
passed: 8837
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
Hello!
On 10/14/21 9:53 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.251 release.
> There are 33 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 16 Oct 2021 14:51:59 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.251-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
## Build
* kernel: 4.14.251-rc1
* git: ['https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git', 'https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc']
* git branch: linux-4.14.y
* git commit: dc0579022db410506fd874cd458c580df7f09db3
* git describe: v4.14.250-34-gdc0579022db4
* test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.250-34-gdc0579022db4
## No regressions (compared to v4.14.250)
## No fixes (compared to v4.14.250)
## Test result summary
total: 77548, pass: 61810, fail: 761, skip: 12833, xfail: 2144
## Build Summary
* arm: 129 total, 129 passed, 0 failed
* arm64: 34 total, 34 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 18 total, 18 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 18 total, 18 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
Hello!
On 10/15/21 12:49 PM, Daniel Díaz wrote:
> ## Build
> * kernel: 4.14.251-rc1
> * git: ['https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git', 'https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc']
> * git branch: linux-4.14.y
> * git commit: dc0579022db410506fd874cd458c580df7f09db3
> * git describe: v4.14.250-34-gdc0579022db4
> * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.250-34-gdc0579022db4
>
> ## No regressions (compared to v4.14.250)
>
> ## No fixes (compared to v4.14.250)
Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
Greetings!
Daniel Díaz
[email protected]
On Thu, Oct 14, 2021 at 04:53:32PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.251 release.
> There are 33 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 16 Oct 2021 14:51:59 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 168 pass: 168 fail: 0
Qemu test results:
total: 421 pass: 421 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter