The tas2783 is a smart audio amplifier with integrated MIPI SoundWire
interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed
for portable applications. An on-chip DSP supports Texas Instruments
SmartAmp speaker protection algorithm. The integrated speaker voltage and
current sense provides for real-time monitoring of loadspeakers.
The ASoC component provides the majority of the functionality of the
device, all the audio functions.
Signed-off-by: Shenghao Ding <[email protected]>
---
Change in v5:
- simplify tasdevice_set_sdw_stream
- fixed some Linux coding style
- fixed the spelling mistakes
- Select left/right channel based on unique id
- a longer description has been added
- remove unused crc8 in KCONFIG
- Invert of RE here means reciprocal of RE
- correct indentation
- correct the wrong pow calibrated register
- correct comment on RESET register
- fixed usually lines don't end with an open parenthesis
- fixed tasdevice_sdw_shutdown
- use defines for function, entity, etc. for readable
- remove unnecessary codec_lock in component_probe()
- remove struct sdw_stream_data
- remove unused macro definitions
- use BIT(2) and BIT(1) instead of 0x2 and 0x1
- implement pm_runtime
---
sound/soc/codecs/Kconfig | 13 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/tas2783-sdw.c | 918 +++++++++++++++++++++++++++++++++
sound/soc/codecs/tas2783.h | 97 ++++
4 files changed, 1030 insertions(+)
create mode 100644 sound/soc/codecs/tas2783-sdw.c
create mode 100644 sound/soc/codecs/tas2783.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 59f9742e9ff4..7008a23f87f4 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -247,6 +247,7 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_TAS2781_COMLIB
imply SND_SOC_TAS2781_FMWLIB
imply SND_SOC_TAS2781_I2C
+ imply SND_SOC_TAS2783
imply SND_SOC_TAS5086
imply SND_SOC_TAS571X
imply SND_SOC_TAS5720
@@ -1847,6 +1848,18 @@ config SND_SOC_TAS2781_I2C
algo coefficient setting, for one, two or even multiple TAS2781
chips.
+config SND_SOC_TAS2783
+ tristate "Texas Instruments TAS2783 speaker amplifier (sdw)"
+ depends on SOUNDWIRE
+ depends on EFI
+ select REGMAP
+ select REGMAP_SOUNDWIRE
+ help
+ Enable support for Texas Instruments TAS2783 Smart Amplifier
+ Digital input mono Class-D and DSP-inside audio power amplifiers.
+ TAS2783 supports the MIPI SoundWire v1.2 compatible interface
+ for audio and control data.
+
config SND_SOC_TAS5086
tristate "Texas Instruments TAS5086 speaker amplifier"
depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index f53baa2b9565..6afceb126ae3 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -284,6 +284,7 @@ snd-soc-tas2770-objs := tas2770.o
snd-soc-tas2781-comlib-objs := tas2781-comlib.o
snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o
snd-soc-tas2781-i2c-objs := tas2781-i2c.o
+snd-soc-tas2783-objs := tas2783-sdw.o
snd-soc-tfa9879-objs := tfa9879.o
snd-soc-tfa989x-objs := tfa989x.o
snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o
@@ -664,6 +665,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o
obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o
obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o
obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o
+obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o
obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o
obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o
obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o
diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c
new file mode 100644
index 000000000000..b74808dd79cf
--- /dev/null
+++ b/sound/soc/codecs/tas2783-sdw.c
@@ -0,0 +1,918 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier
+//
+// Copyright (C) 2023 - 2024 Texas Instruments Incorporated
+// https://www.ti.com
+//
+// Author: Baojun Xu <[email protected]>
+// Kevin Lu <[email protected]>
+// Shenghao Ding <[email protected]>
+//
+
+#include <linux/crc32.h>
+#include <linux/efi.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <sound/pcm_params.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <linux/soundwire/sdw_type.h>
+#include <sound/sdw.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/tas2781-tlv.h>
+
+#include "tas2783.h"
+
+static const unsigned int tas2783_cali_reg[] = {
+ TAS2783_CALIBRATION_RE, /* Resistance */
+ TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */
+ TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */
+ TAS2783_CALIBRATION_POW, /* RMS Power */
+ TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */
+};
+
+static const struct reg_default tas2783_reg_defaults[] = {
+ /* Default values for ROM mode. Activated. */
+ { 0x8002, 0x1a }, /* AMP inactive. */
+ { 0x8097, 0xc8 },
+ { 0x80b5, 0x74 },
+ { 0x8099, 0x20 },
+ { 0xfe8d, 0x0d },
+ { 0xfebe, 0x4a },
+ { 0x8230, 0x00 },
+ { 0x8231, 0x00 },
+ { 0x8232, 0x00 },
+ { 0x8233, 0x01 },
+ { 0x8418, 0x00 }, /* Set volume to 0 dB. */
+ { 0x8419, 0x00 },
+ { 0x841a, 0x00 },
+ { 0x841b, 0x00 },
+ { 0x8428, 0x40 }, /* Unmute channel */
+ { 0x8429, 0x00 },
+ { 0x842a, 0x00 },
+ { 0x842b, 0x00 },
+ { 0x8548, 0x00 }, /* Set volume to 0 dB. */
+ { 0x8549, 0x00 },
+ { 0x854a, 0x00 },
+ { 0x854b, 0x00 },
+ { 0x8558, 0x40 }, /* Unmute channel */
+ { 0x8559, 0x00 },
+ { 0x855a, 0x00 },
+ { 0x855b, 0x00 },
+ { 0x800a, 0x3a }, /* Enable both channel */
+ { 0x800e, 0x44 },
+ { 0x800f, 0x40 },
+ { 0x805c, 0x99 },
+ { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21,
+ TAS2783_SDCA_CTL_FU_MUTE, 0), 0 },
+ { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21,
+ TAS2783_SDCA_CTL_FU_VOLUME, 0), 0 },
+ { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU23,
+ TAS2783_SDCA_CTL_FU_MUTE, 0), 0 },
+};
+
+static bool tas2783_readable_register(struct device *dev,
+ unsigned int reg)
+{
+ switch (reg) {
+ case 0x8000 ... 0xc000: /* Page 0 ~ 127. */
+ case 0xfe80 ... 0xfeff: /* Page 253. */
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool tas2783_volatile_register(struct device *dev,
+ unsigned int reg)
+{
+ switch (reg) {
+ case 0x8001:
+ /* Only reset register was volatiled.
+ * Software reset. Bit is self clearing.
+ * 0b = Don't reset
+ * 1b = reset
+ */
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config tasdevice_regmap = {
+ .reg_bits = 32,
+ .val_bits = 8,
+ .readable_reg = tas2783_readable_register,
+ .volatile_reg = tas2783_volatile_register,
+ .max_register = 0x44ffffff,
+ .reg_defaults = tas2783_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+ .use_single_read = true,
+ .use_single_write = true,
+};
+
+static int tasdevice_clamp(int val, int max, unsigned int invert)
+{
+ /* Keep in valid area, out of range value don't care. */
+ if (val > max)
+ val = max;
+ if (invert)
+ val = max - val;
+ if (val < 0)
+ val = 0;
+ return val;
+}
+
+static int tas2783_digital_getvol(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component
+ = snd_soc_kcontrol_component(kcontrol);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(component);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct regmap *map = tas_dev->regmap;
+ int val = 0, ret;
+
+ if (!ucontrol) {
+ dev_err(tas_dev->dev, "%s, wrong parameter.\n", __func__);
+ return -EINVAL;
+ }
+ /* Read current volume from the device. */
+ ret = regmap_read(map, mc->reg, &val);
+ if (ret < 0) {
+ dev_err(tas_dev->dev, "%s, get digital vol error %x.\n",
+ __func__, ret);
+ return ret;
+ }
+ ucontrol->value.integer.value[0] =
+ tasdevice_clamp(val, mc->max, mc->invert);
+
+ return ret;
+}
+
+static int tas2783_digital_putvol(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component
+ = snd_soc_kcontrol_component(kcontrol);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(component);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct regmap *map = tas_dev->regmap;
+ int val, ret;
+
+ if (!ucontrol) {
+ dev_err(tas_dev->dev, "%s, wrong parameter.\n", __func__);
+ return -EINVAL;
+ }
+ val = tasdevice_clamp(ucontrol->value.integer.value[0],
+ mc->max, mc->invert);
+
+ ret = regmap_write(map, mc->reg, val);
+ if (ret < 0) {
+ dev_dbg(tas_dev->dev, "%s, Put vol %d into %x %x.\n",
+ __func__, val, mc->reg, ret);
+ return ret;
+ }
+
+ return 1;
+}
+
+static int tas2783_amp_getvol(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component
+ = snd_soc_kcontrol_component(kcontrol);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(component);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct regmap *map = tas_dev->regmap;
+ unsigned char mask = 0;
+ int ret, val = 0;
+
+ if (!ucontrol) {
+ dev_err(tas_dev->dev, "%s, wrong parameter.\n", __func__);
+ return -EINVAL;
+ }
+ /* Read current volume from the device. */
+ ret = regmap_read(map, mc->reg, &val);
+ if (ret < 0) {
+ dev_err(tas_dev->dev, "%s get AMP vol from %x with %d.\n",
+ __func__, mc->reg, ret);
+ return ret;
+ }
+
+ mask = (1 << fls(mc->max)) - 1;
+ mask <<= mc->shift;
+ val = (val & mask) >> mc->shift;
+ ucontrol->value.integer.value[0] = tasdevice_clamp(val, mc->max,
+ mc->invert);
+
+ return ret;
+}
+
+static int tas2783_amp_putvol(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component
+ = snd_soc_kcontrol_component(kcontrol);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(component);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct regmap *map = tas_dev->regmap;
+ unsigned char mask;
+ int val, ret;
+
+ if (!ucontrol) {
+ dev_err(tas_dev->dev, "%s, wrong parameter.\n", __func__);
+ return -EINVAL;
+ }
+ mask = (1 << fls(mc->max)) - 1;
+ mask <<= mc->shift;
+ val = tasdevice_clamp(ucontrol->value.integer.value[0], mc->max,
+ mc->invert);
+ ret = regmap_update_bits(map, mc->reg, mask, val << mc->shift);
+ if (ret < 0) {
+ dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n",
+ mc->reg, val, ret);
+ return ret;
+ }
+
+ return 1;
+}
+
+static const struct snd_kcontrol_new tas2783_snd_controls[] = {
+ SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL,
+ 1, 0, 20, 0, tas2783_amp_getvol,
+ tas2783_amp_putvol, amp_vol_tlv),
+ SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2783_DVC_LVL,
+ 0, 0, 200, 1, tas2783_digital_getvol,
+ tas2783_digital_putvol, dvc_tlv),
+};
+
+static void tas2783_apply_calib(struct tasdevice_priv *tas_dev,
+ unsigned int *cali_data)
+{
+ struct regmap *map = tas_dev->regmap;
+ u8 *reg_start;
+ int ret;
+
+ if (!tas_dev->sdw_peripheral) {
+ dev_err(tas_dev->dev, "%s, slaver doesn't exist.\n",
+ __func__);
+ return;
+ }
+ if ((tas_dev->sdw_peripheral->id.unique_id < TAS2783_ID_MIN) ||
+ (tas_dev->sdw_peripheral->id.unique_id > TAS2783_ID_MAX)) {
+ dev_err(tas_dev->dev, "%s, error unique_id.\n",
+ __func__);
+ return;
+ }
+
+ reg_start = (u8 *)(cali_data + (tas_dev->sdw_peripheral->id.unique_id
+ - TAS2783_ID_MIN) * sizeof(tas2783_cali_reg));
+ for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) {
+ ret = regmap_bulk_write(map, tas2783_cali_reg[i],
+ reg_start + i, 4);
+ if (ret != 0) {
+ dev_err(tas_dev->dev, "Cali failed %x:%d\n",
+ tas2783_cali_reg[i], ret);
+ break;
+ }
+ }
+}
+
+/* Update the calibrate data, including speaker impedance, f0, etc, into algo.
+ * Calibrate data is done by manufacturer in the factory. These data are used
+ * by Algo for calucating the speaker temperature, speaker membrance excursion
+ * and f0 in real time during playback.
+ * In case of no or valid calibrated data, dsp will still works with default
+ * calibrated data inside algo.
+ */
+static int tas2783_calibration(struct tasdevice_priv *tas_dev)
+{
+ efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc,
+ 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
+ static efi_char16_t efi_name[] = L"CALI_DATA";
+ struct tm *tm = &tas_dev->tm;
+ unsigned int attr = 0, crc;
+ unsigned int *tmp_val;
+ efi_status_t status;
+
+ tas_dev->cali_data.total_sz = 128;
+
+ status = efi.get_variable(efi_name, &efi_guid, &attr,
+ &tas_dev->cali_data.total_sz, tas_dev->cali_data.data);
+ if (status == EFI_BUFFER_TOO_SMALL) {
+ status = efi.get_variable(efi_name, &efi_guid, &attr,
+ &tas_dev->cali_data.total_sz,
+ tas_dev->cali_data.data);
+ dev_dbg(tas_dev->dev, "cali get %lx bytes result:%ld\n",
+ tas_dev->cali_data.total_sz, status);
+ }
+ if (status != 0) {
+ /* Failed got calibration data from EFI. */
+ dev_dbg(tas_dev->dev, "No calibration data in UEFI.");
+ return 0;
+ }
+
+ tmp_val = (unsigned int *)tas_dev->cali_data.data;
+
+ crc = crc32(~0, tas_dev->cali_data.data, 84) ^ ~0;
+
+ if (crc == tmp_val[21]) {
+ /* Date and time of calibration was done. */
+ time64_to_tm(tmp_val[20], 0, tm);
+ dev_dbg(tas_dev->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+ tas2783_apply_calib(tas_dev, tmp_val);
+ } else {
+ dev_dbg(tas_dev->dev, "CRC 0x%08x not match 0x%08x\n",
+ crc, tmp_val[21]);
+ tas_dev->cali_data.total_sz = 0;
+ }
+
+ return 0;
+}
+
+static void tasdevice_rca_ready(const struct firmware *fmw,
+ void *context)
+{
+ struct tasdevice_priv *tas_dev =
+ (struct tasdevice_priv *) context;
+ struct tas2783_firmware_node *p;
+ struct regmap *map = tas_dev->regmap;
+ unsigned char *buf = NULL;
+ int offset = 0, img_sz;
+ int ret, value_sdw;
+
+ mutex_lock(&tas_dev->codec_lock);
+
+ if (!fmw || !fmw->data) {
+ /* No firmware binary, devices will work in ROM mode. */
+ dev_err(tas_dev->dev,
+ "Failed to read %s, no side-effect on driver\n",
+ tas_dev->rca_binaryname);
+ ret = -EINVAL;
+ goto out;
+ }
+ buf = (unsigned char *)fmw->data;
+
+ img_sz = le32_to_cpup((__le32 *)&buf[offset]);
+ offset += sizeof(img_sz);
+ if (img_sz != fmw->size) {
+ dev_err(tas_dev->dev, "Size not matching, %d %u",
+ (int)fmw->size, img_sz);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ while (offset < img_sz) {
+ p = (struct tas2783_firmware_node *)(buf + offset);
+ if (p->length > 1) {
+ ret = regmap_bulk_write(map, p->download_addr,
+ buf + offset + sizeof(unsigned int)*5, p->length);
+ } else
+ ret = regmap_write(map, p->download_addr,
+ *(buf + offset + sizeof(unsigned int) * 5));
+
+ if (ret != 0) {
+ dev_dbg(tas_dev->dev, "Load FW fail: %d.\n", ret);
+ goto out;
+ }
+ offset += sizeof(unsigned int)*5 + p->length;
+ }
+ /* Select left/right channel based on unique id. */
+ value_sdw = 0x1a;
+ value_sdw += ((tas_dev->sdw_peripheral->dev_num & 1) << 4);
+ dev_dbg(tas_dev->dev, "%s dev_num = %u", __func__,
+ tas_dev->sdw_peripheral->dev_num);
+ regmap_write(map, TASDEVICE_REG(0, 0, 0x0a), value_sdw);
+
+ tas2783_calibration(tas_dev);
+
+out:
+ mutex_unlock(&tas_dev->codec_lock);
+ if (fmw)
+ release_firmware(fmw);
+}
+
+static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM,
+ 0, 0),
+ SND_SOC_DAPM_OUTPUT("OUT"),
+ SND_SOC_DAPM_INPUT("DMIC")
+};
+
+static const struct snd_soc_dapm_route tasdevice_audio_map[] = {
+ {"OUT", NULL, "ASI"},
+ {"ASI OUT", NULL, "DMIC"}
+};
+
+static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai,
+ void *sdw_stream, int direction)
+{
+ snd_soc_dai_dma_data_set(dai, direction, sdw_stream);
+
+ return 0;
+}
+
+static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ snd_soc_dai_set_dma_data(dai, substream, NULL);
+}
+
+static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct tasdevice_priv *tas_priv =
+ snd_soc_component_get_drvdata(component);
+ struct sdw_stream_config stream_config = {0};
+ struct sdw_port_config port_config = {0};
+ struct sdw_stream_runtime *sdw_stream;
+ int ret;
+
+ dev_dbg(dai->dev, "%s %s", __func__, dai->name);
+ sdw_stream = snd_soc_dai_get_dma_data(dai, substream);
+
+ if (!sdw_stream)
+ return -EINVAL;
+
+ if (!tas_priv->sdw_peripheral)
+ return -EINVAL;
+
+ /* SoundWire specific configuration */
+ snd_sdw_params_to_config(substream, params,
+ &stream_config, &port_config);
+
+ /* port 1 for playback */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ port_config.num = 1;
+ else
+ port_config.num = 2;
+
+ ret = sdw_stream_add_slave(tas_priv->sdw_peripheral,
+ &stream_config, &port_config, 1, sdw_stream);
+ if (ret) {
+ dev_err(dai->dev, "Unable to configure port\n");
+ return ret;
+ }
+
+ dev_dbg(dai->dev, "%s fomrat: %i rate: %i\n", __func__,
+ params_format(params), params_rate(params));
+
+ return 0;
+}
+
+static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct tasdevice_priv *tas_priv =
+ snd_soc_component_get_drvdata(component);
+ struct sdw_stream_runtime *sdw_stream =
+ snd_soc_dai_get_dma_data(dai, substream);
+
+ if (!tas_priv->sdw_peripheral)
+ return -EINVAL;
+
+ sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream);
+
+ return 0;
+}
+
+static int tasdevice_mute(struct snd_soc_dai *dai, int mute,
+ int direction)
+{
+ struct snd_soc_component *component = dai->component;
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(component);
+ struct regmap *map = tas_dev->regmap;
+ int ret;
+
+ dev_dbg(tas_dev->dev, "Mute or unmute %d.\n", mute);
+
+ if (mute) {
+ /* Echo channel can't be shutdown while tas2783 must keep
+ * working state while playback is on.
+ */
+ if (direction == SNDRV_PCM_STREAM_CAPTURE
+ && tas_dev->pstream == true)
+ return 0;
+ /* FU23 mute (0x40400108) */
+ ret = regmap_write(map,
+ SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
+ TAS2783_SDCA_ENT_FU23, TAS2783_SDCA_CTL_FU_MUTE, 0),
+ 1);
+ ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x1a);
+ tas_dev->pstream = false;
+ } else {
+ /* FU23 Unmute, 0x40400108. */
+ ret = regmap_write(map,
+ SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
+ TAS2783_SDCA_ENT_FU23, TAS2783_SDCA_CTL_FU_MUTE, 0),
+ 0);
+ ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x0);
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+ tas_dev->pstream = true;
+ }
+
+ if (ret)
+ dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n",
+ mute, ret);
+
+ return ret;
+}
+
+static const struct snd_soc_dai_ops tasdevice_dai_ops = {
+ .mute_stream = tasdevice_mute,
+ .hw_params = tasdevice_sdw_hw_params,
+ .hw_free = tasdevice_sdw_pcm_hw_free,
+ .set_stream = tasdevice_set_sdw_stream,
+ .shutdown = tasdevice_sdw_shutdown,
+};
+
+static struct snd_soc_dai_driver tasdevice_dai_driver[] = {
+ {
+ .name = "tas2783-codec",
+ .id = 0,
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 4,
+ .rates = TAS2783_DEVICE_RATES,
+ .formats = TAS2783_DEVICE_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 4,
+ .rates = TAS2783_DEVICE_RATES,
+ .formats = TAS2783_DEVICE_FORMATS,
+ },
+ .ops = &tasdevice_dai_ops,
+ .symmetric_rate = 1,
+ },
+};
+
+static void tas2783_reset(struct tasdevice_priv *tas_dev)
+{
+ struct regmap *map = tas_dev->regmap;
+ int ret;
+
+ ret = regmap_write(map, TAS2873_REG_SWRESET, 1);
+ if (ret) {
+ dev_err(tas_dev->dev, "Reset failed.\n");
+ return;
+ }
+ usleep_range(1000, 1050);
+}
+
+static int tasdevice_component_probe(struct snd_soc_component *component)
+{
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(component);
+
+ tas_dev->component = component;
+
+ dev_dbg(tas_dev->dev, "%s was called.\n", __func__);
+
+ return 0;
+}
+
+static const struct snd_soc_component_driver
+ soc_codec_driver_tasdevice = {
+ .probe = tasdevice_component_probe,
+ .controls = tas2783_snd_controls,
+ .num_controls = ARRAY_SIZE(tas2783_snd_controls),
+ .dapm_widgets = tasdevice_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets),
+ .dapm_routes = tasdevice_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map),
+ .idle_bias_on = 1,
+ .endianness = 1,
+};
+
+static int tasdevice_init(struct tasdevice_priv *tas_dev)
+{
+ int ret;
+
+ dev_set_drvdata(tas_dev->dev, tas_dev);
+
+ mutex_init(&tas_dev->codec_lock);
+ ret = devm_snd_soc_register_component(tas_dev->dev,
+ &soc_codec_driver_tasdevice,
+ tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver));
+ if (ret) {
+ dev_err(tas_dev->dev, "%s: codec register error:%d.\n",
+ __func__, ret);
+ }
+
+ tas2783_reset(tas_dev);
+ /* tas2783-8[9,...,f].bin was copied into /lib/firmware/ */
+ scnprintf(tas_dev->rca_binaryname, 64, "tas2783-%01x.bin",
+ tas_dev->sdw_peripheral->id.unique_id);
+
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
+ tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL,
+ tas_dev, tasdevice_rca_ready);
+ if (ret) {
+ dev_dbg(tas_dev->dev,
+ "%s: request_firmware %x open status: %d.\n",
+ __func__, tas_dev->sdw_peripheral->id.unique_id, ret);
+ }
+
+ /* set autosuspend parameters */
+ pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000);
+ pm_runtime_use_autosuspend(tas_dev->dev);
+
+ /* make sure the device does not suspend immediately */
+ pm_runtime_mark_last_busy(tas_dev->dev);
+
+ pm_runtime_enable(tas_dev->dev);
+
+ dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__);
+
+ return ret;
+}
+
+static int tasdevice_read_prop(struct sdw_slave *slave)
+{
+ struct sdw_slave_prop *prop = &slave->prop;
+ int nval;
+ int i, j;
+ u32 bit;
+ unsigned long addr;
+ struct sdw_dpn_prop *dpn;
+
+ prop->scp_int1_mask =
+ SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+ prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
+
+ prop->paging_support = true;
+
+ /* first we need to allocate memory for set bits in port lists */
+ prop->source_ports = BIT(2); /* BITMAP: 00000100 */
+ prop->sink_ports = BIT(1); /* BITMAP: 00000010 */
+
+ nval = hweight32(prop->source_ports);
+ prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
+ sizeof(*prop->src_dpn_prop), GFP_KERNEL);
+ if (!prop->src_dpn_prop)
+ return -ENOMEM;
+
+ i = 0;
+ dpn = prop->src_dpn_prop;
+ addr = prop->source_ports;
+ for_each_set_bit(bit, &addr, 32) {
+ dpn[i].num = bit;
+ dpn[i].type = SDW_DPN_FULL;
+ dpn[i].simple_ch_prep_sm = true;
+ dpn[i].ch_prep_timeout = 10;
+ i++;
+ }
+
+ /* do this again for sink now */
+ nval = hweight32(prop->sink_ports);
+ prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
+ sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
+ if (!prop->sink_dpn_prop)
+ return -ENOMEM;
+
+ j = 0;
+ dpn = prop->sink_dpn_prop;
+ addr = prop->sink_ports;
+ for_each_set_bit(bit, &addr, 32) {
+ dpn[j].num = bit;
+ dpn[j].type = SDW_DPN_FULL;
+ dpn[j].simple_ch_prep_sm = true;
+ dpn[j].ch_prep_timeout = 10;
+ j++;
+ }
+
+ /* set the timeout values */
+ prop->clk_stop_timeout = 20;
+
+ return 0;
+}
+
+static int tasdevice_io_init(struct device *dev, struct sdw_slave *slave)
+{
+ struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
+
+ if (tas_priv->hw_init)
+ return 0;
+
+ if (tas_priv->first_hw_init) {
+ regcache_cache_only(tas_priv->regmap, false);
+ regcache_cache_bypass(tas_priv->regmap, true);
+ } else {
+ /*
+ * PM runtime is only enabled when a Slave reports as Attached
+ */
+
+ /* set autosuspend parameters */
+ pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
+ pm_runtime_use_autosuspend(&slave->dev);
+
+ /* update count of parent 'active' children */
+ pm_runtime_set_active(&slave->dev);
+
+ /* make sure the device does not suspend immediately */
+ pm_runtime_mark_last_busy(&slave->dev);
+
+ pm_runtime_enable(&slave->dev);
+ }
+
+ pm_runtime_get_noresume(&slave->dev);
+
+ /* sw reset */
+ regmap_write(tas_priv->regmap, 0x8001, 0x01);
+
+ if (tas_priv->first_hw_init) {
+ regcache_cache_bypass(tas_priv->regmap, false);
+ regcache_mark_dirty(tas_priv->regmap);
+ } else
+ tas_priv->first_hw_init = true;
+ /* Mark Slave initialization complete */
+ tas_priv->hw_init = true;
+
+ return 0;
+}
+
+static int tasdevice_update_status(struct sdw_slave *slave,
+ enum sdw_slave_status status)
+{
+ struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev);
+
+ /* Update the status */
+ tas_priv->status = status;
+
+ if (status == SDW_SLAVE_UNATTACHED)
+ tas_priv->hw_init = false;
+
+ /* Perform initialization only if slave status
+ * is present and hw_init flag is false
+ */
+ if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED)
+ return 0;
+
+ /* perform I/O transfers required for Slave initialization */
+ return tasdevice_io_init(&slave->dev, slave);
+}
+
+/*
+ * slave_ops: callbacks for get_clock_stop_mode, clock_stop and
+ * port_prep are not defined for now
+ */
+static const struct sdw_slave_ops tasdevice_sdw_ops = {
+ .read_prop = tasdevice_read_prop,
+ .update_status = tasdevice_update_status,
+};
+
+static void tasdevice_remove(struct tasdevice_priv *tas_dev)
+{
+ mutex_destroy(&tas_dev->codec_lock);
+}
+
+static int tasdevice_sdw_probe(struct sdw_slave *peripheral,
+ const struct sdw_device_id *id)
+{
+ struct device *dev = &peripheral->dev;
+ struct tasdevice_priv *tas_dev;
+ int ret;
+
+ tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL);
+ if (!tas_dev)
+ return -ENOMEM;
+
+ tas_dev->dev = dev;
+ tas_dev->chip_id = id->driver_data;
+ tas_dev->sdw_peripheral = peripheral;
+ /*
+ * Mark hw_init to false
+ * HW init will be performed when device reports present
+ */
+ tas_dev->hw_init = false;
+ tas_dev->first_hw_init = false;
+
+ dev_set_drvdata(dev, tas_dev);
+
+ tas_dev->regmap = devm_regmap_init_sdw(peripheral,
+ &tasdevice_regmap);
+ if (IS_ERR(tas_dev->regmap)) {
+ ret = PTR_ERR(tas_dev->regmap);
+ dev_err(dev, "Failed %d of devm_regmap_init_sdw.", ret);
+ } else
+ ret = tasdevice_init(tas_dev);
+
+ if (ret < 0)
+ tasdevice_remove(tas_dev);
+
+ return ret;
+}
+
+static int tasdevice_sdw_remove(struct sdw_slave *peripheral)
+{
+ struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev);
+
+ if (tas_dev->first_hw_init)
+ pm_runtime_disable(tas_dev->dev);
+ tasdevice_remove(tas_dev);
+
+ return 0;
+}
+
+static const struct sdw_device_id tasdevice_sdw_id[] = {
+ SDW_SLAVE_ENTRY(0x0102, 0x0000, 0),
+ {},
+};
+
+MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id);
+
+static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev)
+{
+ struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
+
+ if (!tas_priv->hw_init)
+ return 0;
+
+ regcache_cache_only(tas_priv->regmap, true);
+
+ return 0;
+}
+
+#define TAS2783_PROBE_TIMEOUT 5000
+
+static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev)
+{
+ struct sdw_slave *slave = dev_to_sdw_dev(dev);
+ struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
+ unsigned long time;
+
+ if (!tas_priv->first_hw_init)
+ return 0;
+
+ if (!slave->unattach_request)
+ goto regmap_sync;
+
+ time = wait_for_completion_timeout(&slave->initialization_complete,
+ msecs_to_jiffies(TAS2783_PROBE_TIMEOUT));
+ if (!time) {
+ dev_err(&slave->dev, "Init not complete, timed out\n");
+ sdw_show_ping_status(slave->bus, true);
+
+ return -ETIMEDOUT;
+ }
+
+regmap_sync:
+ slave->unattach_request = 0;
+ regcache_cache_only(tas_priv->regmap, false);
+ regcache_sync(tas_priv->regmap);
+
+ return 0;
+}
+
+static const struct dev_pm_ops tas2783_sdca_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend,
+ tas2783_sdca_dev_resume)
+ SET_RUNTIME_PM_OPS(tas2783_sdca_dev_suspend,
+ tas2783_sdca_dev_resume, NULL)
+};
+
+static struct sdw_driver tasdevice_sdw_driver = {
+ .driver = {
+ .name = "slave-tas2783",
+ .pm = &tas2783_sdca_pm,
+ },
+ .probe = tasdevice_sdw_probe,
+ .remove = tasdevice_sdw_remove,
+ .ops = &tasdevice_sdw_ops,
+ .id_table = tasdevice_sdw_id,
+};
+
+module_sdw_driver(tasdevice_sdw_driver);
+
+MODULE_AUTHOR("Baojun Xu <[email protected]>");
+MODULE_AUTHOR("Shenghao Ding <[email protected]>");
+MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h
new file mode 100644
index 000000000000..703b2c0b78a6
--- /dev/null
+++ b/sound/soc/codecs/tas2783.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier
+ *
+ * Copyright (C) 2023 - 2024 Texas Instruments Incorporated
+ * https://www.ti.com
+ *
+ * Author: Baojun Xu <[email protected]>
+ * Shenghao Ding <[email protected]>
+ */
+
+#ifndef __TAS2783_H__
+#define __TAS2783_H__
+
+#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | \
+ SNDRV_PCM_RATE_96000 | \
+ SNDRV_PCM_RATE_88200)
+
+#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | \
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+/* BOOK, PAGE Control Register */
+#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 + \
+ (page * 128) + reg)
+
+/*Software Reset */
+#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01)
+
+/* Volume control */
+#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1A)
+#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03)
+#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1)
+
+/* Calibration data */
+#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74)
+#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14)
+#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c)
+#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x13, 0x70)
+#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c)
+
+/* Unique id start */
+#define TAS2783_ID_MIN 0x08
+/* Unique id end */
+#define TAS2783_ID_MAX 0x0F
+
+/* TAS2783 SDCA Control - function number */
+#define TAS2783_FUNC_TYPE_SMART_AMP 0x01
+
+/* TAS2783 SDCA entity */
+#define TAS2783_SDCA_ENT_FU21 0x01
+#define TAS2783_SDCA_ENT_FU23 0x02
+
+/* TAS2783 SDCA control */
+#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01
+#define TAS2783_SDCA_CTL_FU_MUTE 0x01
+#define TAS2783_SDCA_CTL_FU_VOLUME 0x02
+#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10
+
+#define TAS2783_DEVICE_CHANNEL_LEFT 1
+#define TAS2783_DEVICE_CHANNEL_RIGHT 2
+
+#define TAS2783_MAX_CALIDATA_SIZE 252
+
+struct tas2783_firmware_node {
+ unsigned int vendor_id;
+ unsigned int file_id;
+ unsigned int version_id;
+ unsigned int length;
+ unsigned int download_addr;
+};
+
+struct calibration_data {
+ unsigned long total_sz;
+ unsigned char data[TAS2783_MAX_CALIDATA_SIZE];
+};
+
+struct tasdevice_priv {
+ struct snd_soc_component *component;
+ struct calibration_data cali_data;
+ struct sdw_slave *sdw_peripheral;
+ enum sdw_slave_status status;
+ struct sdw_bus_params params;
+ struct mutex codec_lock;
+ struct regmap *regmap;
+ struct device *dev;
+ struct tm tm;
+ unsigned char rca_binaryname[64];
+ unsigned char dev_name[32];
+ unsigned int chip_id;
+ bool pstream;
+ bool hw_init;
+ bool first_hw_init;
+};
+
+#endif /*__TAS2783_H__ */
--
2.34.1
Hi Shenghao,
On Sat, 2024-01-13 at 19:49 +0800, Shenghao Ding wrote:
..
> +static const unsigned int tas2783_cali_reg[] = {
> + TAS2783_CALIBRATION_RE, /* Resistance */
> + TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */
> + TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */
> + TAS2783_CALIBRATION_POW, /* RMS Power */
> + TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */
> +};
..
> +static void tas2783_apply_calib(struct tasdevice_priv *tas_dev,
> + unsigned int *cali_data)
> +{
> + struct regmap *map = tas_dev->regmap;
> + u8 *reg_start;
> + int ret;
> +
> + if (!tas_dev->sdw_peripheral) {
> + dev_err(tas_dev->dev, "%s, slaver doesn't exist.\n",
> + __func__);
> + return;
> + }
> + if ((tas_dev->sdw_peripheral->id.unique_id < TAS2783_ID_MIN) ||
> + (tas_dev->sdw_peripheral->id.unique_id > TAS2783_ID_MAX)) {
> + dev_err(tas_dev->dev, "%s, error unique_id.\n",
> + __func__);
> + return;
> + }
> +
> + reg_start = (u8 *)(cali_data + (tas_dev->sdw_peripheral->id.unique_id
> + - TAS2783_ID_MIN) * sizeof(tas2783_cali_reg));
> + for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) {
> + ret = regmap_bulk_write(map, tas2783_cali_reg[i],
> + reg_start + i, 4);
reg_start is u8, reg_start + i only adds i byte.
I think it should be reg_start + i * 4, because the calibration values
are unsigned ints.
> + if (ret != 0) {
> + dev_err(tas_dev->dev, "Cali failed %x:%d\n",
> + tas2783_cali_reg[i], ret);
> + break;
> + }
> + }
> +}
> +
> +/* Update the calibrate data, including speaker impedance, f0, etc, into algo.
> + * Calibrate data is done by manufacturer in the factory. These data are used
> + * by Algo for calucating the speaker temperature, speaker membrance excursion
> + * and f0 in real time during playback.
> + * In case of no or valid calibrated data, dsp will still works with default
> + * calibrated data inside algo.
> + */
calibration data, Calibration data, calculating, membrane
> +static int tas2783_calibration(struct tasdevice_priv *tas_dev)
> +{
> + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc,
> + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
> + static efi_char16_t efi_name[] = L"CALI_DATA";
> + struct tm *tm = &tas_dev->tm;
> + unsigned int attr = 0, crc;
> + unsigned int *tmp_val;
> + efi_status_t status;
> +
> + tas_dev->cali_data.total_sz = 128;
Where does 128 come from? The tas_dev->cali_data.data is a 252 byte
buffer.
#define TAS2783_MAX_CALIDATA_SIZE 252
struct calibration_data {
unsigned long total_sz;
unsigned char data[TAS2783_MAX_CALIDATA_SIZE];
};
> +
> + status = efi.get_variable(efi_name, &efi_guid, &attr,
> + &tas_dev->cali_data.total_sz, tas_dev->cali_data.data);
> + if (status == EFI_BUFFER_TOO_SMALL) {
> + status = efi.get_variable(efi_name, &efi_guid, &attr,
> + &tas_dev->cali_data.total_sz,
> + tas_dev->cali_data.data);
The first efi.get_variable call updates the total_sz, and the
second efi.get_variable can write more than 252 bytes. (if the efi
variable is bigger)
I don't think you can handle the EFI_BUFFER_TOO_SMALL case, if you only
want to use the fixed size buffer.
> + dev_dbg(tas_dev->dev, "cali get %lx bytes result:%ld\n",
> + tas_dev->cali_data.total_sz, status);
> + }
> + if (status != 0) {
status != EFI_SUCCESS
> + /* Failed got calibration data from EFI. */
> + dev_dbg(tas_dev->dev, "No calibration data in UEFI.");
> + return 0;
> + }
> +
> + tmp_val = (unsigned int *)tas_dev->cali_data.data;
> +
> + crc = crc32(~0, tas_dev->cali_data.data, 84) ^ ~0;
> +
> + if (crc == tmp_val[21]) {
> + /* Date and time of calibration was done. */
> + time64_to_tm(tmp_val[20], 0, tm);
> + dev_dbg(tas_dev->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n",
> + tm->tm_year, tm->tm_mon, tm->tm_mday,
> + tm->tm_hour, tm->tm_min, tm->tm_sec);
> + tas2783_apply_calib(tas_dev, tmp_val);
> + } else {
> + dev_dbg(tas_dev->dev, "CRC 0x%08x not match 0x%08x\n",
> + crc, tmp_val[21]);
> + tas_dev->cali_data.total_sz = 0;
> + }
> +
> + return 0;
> +}
> +
> +static void tasdevice_rca_ready(const struct firmware *fmw,
> + void *context)
> +{
> + struct tasdevice_priv *tas_dev =
> + (struct tasdevice_priv *) context;
> + struct tas2783_firmware_node *p;
> + struct regmap *map = tas_dev->regmap;
> + unsigned char *buf = NULL;
> + int offset = 0, img_sz;
> + int ret, value_sdw;
> +
> + mutex_lock(&tas_dev->codec_lock);
> +
> + if (!fmw || !fmw->data) {
> + /* No firmware binary, devices will work in ROM mode. */
> + dev_err(tas_dev->dev,
> + "Failed to read %s, no side-effect on driver\n",
> + tas_dev->rca_binaryname);
> + ret = -EINVAL;
> + goto out;
> + }
> + buf = (unsigned char *)fmw->data;
> +
> + img_sz = le32_to_cpup((__le32 *)&buf[offset]);
> + offset += sizeof(img_sz);
> + if (img_sz != fmw->size) {
> + dev_err(tas_dev->dev, "Size not matching, %d %u",
> + (int)fmw->size, img_sz);
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + while (offset < img_sz) {
> + p = (struct tas2783_firmware_node *)(buf + offset);
> + if (p->length > 1) {
> + ret = regmap_bulk_write(map, p->download_addr,
> + buf + offset + sizeof(unsigned int)*5, p->length);
> + } else
> + ret = regmap_write(map, p->download_addr,
> + *(buf + offset + sizeof(unsigned int) * 5));
> +
> + if (ret != 0) {
> + dev_dbg(tas_dev->dev, "Load FW fail: %d.\n", ret);
> + goto out;
> + }
> + offset += sizeof(unsigned int)*5 + p->length;
> + }
> + /* Select left/right channel based on unique id. */
> + value_sdw = 0x1a;
> + value_sdw += ((tas_dev->sdw_peripheral->dev_num & 1) << 4);
> + dev_dbg(tas_dev->dev, "%s dev_num = %u", __func__,
> + tas_dev->sdw_peripheral->dev_num);
> + regmap_write(map, TASDEVICE_REG(0, 0, 0x0a), value_sdw);
You can add a define for TASDEVICE_REG(0, 0, 0x0a)
> +
> + tas2783_calibration(tas_dev);
> +
> +out:
> + mutex_unlock(&tas_dev->codec_lock);
> + if (fmw)
> + release_firmware(fmw);
> +}
> +
> +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = {
> + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0),
> + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM,
> + 0, 0),
> + SND_SOC_DAPM_OUTPUT("OUT"),
> + SND_SOC_DAPM_INPUT("DMIC")
> +};
> +
> +static const struct snd_soc_dapm_route tasdevice_audio_map[] = {
> + {"OUT", NULL, "ASI"},
> + {"ASI OUT", NULL, "DMIC"}
> +};
> +
> +static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai,
> + void *sdw_stream, int direction)
> +{
> + snd_soc_dai_dma_data_set(dai, direction, sdw_stream);
> +
> + return 0;
> +}
> +
> +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + snd_soc_dai_set_dma_data(dai, substream, NULL);
> +}
> +
> +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
> +{
> + struct snd_soc_component *component = dai->component;
> + struct tasdevice_priv *tas_priv =
> + snd_soc_component_get_drvdata(component);
> + struct sdw_stream_config stream_config = {0};
> + struct sdw_port_config port_config = {0};
> + struct sdw_stream_runtime *sdw_stream;
> + int ret;
> +
> + dev_dbg(dai->dev, "%s %s", __func__, dai->name);
> + sdw_stream = snd_soc_dai_get_dma_data(dai, substream);
> +
> + if (!sdw_stream)
> + return -EINVAL;
> +
> + if (!tas_priv->sdw_peripheral)
> + return -EINVAL;
> +
> + /* SoundWire specific configuration */
> + snd_sdw_params_to_config(substream, params,
> + &stream_config, &port_config);
> +
> + /* port 1 for playback */
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> + port_config.num = 1;
> + else
> + port_config.num = 2;
> +
> + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral,
> + &stream_config, &port_config, 1, sdw_stream);
> + if (ret) {
> + dev_err(dai->dev, "Unable to configure port\n");
> + return ret;
> + }
> +
> + dev_dbg(dai->dev, "%s fomrat: %i rate: %i\n", __func__,
format
> + params_format(params), params_rate(params));
> +
> + return 0;
> +}
> +
> +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + struct snd_soc_component *component = dai->component;
> + struct tasdevice_priv *tas_priv =
> + snd_soc_component_get_drvdata(component);
> + struct sdw_stream_runtime *sdw_stream =
> + snd_soc_dai_get_dma_data(dai, substream);
> +
> + if (!tas_priv->sdw_peripheral)
> + return -EINVAL;
> +
> + sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream);
> +
> + return 0;
> +}
> +
> +static int tasdevice_mute(struct snd_soc_dai *dai, int mute,
> + int direction)
> +{
> + struct snd_soc_component *component = dai->component;
> + struct tasdevice_priv *tas_dev =
> + snd_soc_component_get_drvdata(component);
> + struct regmap *map = tas_dev->regmap;
> + int ret;
> +
> + dev_dbg(tas_dev->dev, "Mute or unmute %d.\n", mute);
> +
> + if (mute) {
> + /* Echo channel can't be shutdown while tas2783 must keep
> + * working state while playback is on.
> + */
> + if (direction == SNDRV_PCM_STREAM_CAPTURE
> + && tas_dev->pstream == true)
> + return 0;
> + /* FU23 mute (0x40400108) */
> + ret = regmap_write(map,
> + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
> + TAS2783_SDCA_ENT_FU23, TAS2783_SDCA_CTL_FU_MUTE, 0),
> + 1);
> + ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x1a);
> + tas_dev->pstream = false;
> + } else {
> + /* FU23 Unmute, 0x40400108. */
> + ret = regmap_write(map,
> + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
> + TAS2783_SDCA_ENT_FU23, TAS2783_SDCA_CTL_FU_MUTE, 0),
> + 0);
> + ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x0);
> + if (direction == SNDRV_PCM_STREAM_PLAYBACK)
> + tas_dev->pstream = true;
> + }
> +
> + if (ret)
> + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n",
> + mute, ret);
> +
> + return ret;
> +}
> +
> +static const struct snd_soc_dai_ops tasdevice_dai_ops = {
> + .mute_stream = tasdevice_mute,
> + .hw_params = tasdevice_sdw_hw_params,
> + .hw_free = tasdevice_sdw_pcm_hw_free,
> + .set_stream = tasdevice_set_sdw_stream,
> + .shutdown = tasdevice_sdw_shutdown,
> +};
> +
> +static struct snd_soc_dai_driver tasdevice_dai_driver[] = {
> + {
> + .name = "tas2783-codec",
> + .id = 0,
> + .playback = {
> + .stream_name = "Playback",
> + .channels_min = 1,
> + .channels_max = 4,
> + .rates = TAS2783_DEVICE_RATES,
> + .formats = TAS2783_DEVICE_FORMATS,
> + },
> + .capture = {
> + .stream_name = "Capture",
> + .channels_min = 1,
> + .channels_max = 4,
> + .rates = TAS2783_DEVICE_RATES,
> + .formats = TAS2783_DEVICE_FORMATS,
> + },
> + .ops = &tasdevice_dai_ops,
> + .symmetric_rate = 1,
> + },
> +};
> +
> +static void tas2783_reset(struct tasdevice_priv *tas_dev)
> +{
> + struct regmap *map = tas_dev->regmap;
> + int ret;
> +
> + ret = regmap_write(map, TAS2873_REG_SWRESET, 1);
> + if (ret) {
> + dev_err(tas_dev->dev, "Reset failed.\n");
> + return;
> + }
> + usleep_range(1000, 1050);
> +}
> +
> +static int tasdevice_component_probe(struct snd_soc_component *component)
> +{
> + struct tasdevice_priv *tas_dev =
> + snd_soc_component_get_drvdata(component);
> +
> + tas_dev->component = component;
> +
> + dev_dbg(tas_dev->dev, "%s was called.\n", __func__);
> +
> + return 0;
> +}
> +
> +static const struct snd_soc_component_driver
> + soc_codec_driver_tasdevice = {
> + .probe = tasdevice_component_probe,
> + .controls = tas2783_snd_controls,
> + .num_controls = ARRAY_SIZE(tas2783_snd_controls),
> + .dapm_widgets = tasdevice_dapm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets),
> + .dapm_routes = tasdevice_audio_map,
> + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map),
> + .idle_bias_on = 1,
> + .endianness = 1,
> +};
> +
> +static int tasdevice_init(struct tasdevice_priv *tas_dev)
> +{
> + int ret;
> +
> + dev_set_drvdata(tas_dev->dev, tas_dev);
> +
> + mutex_init(&tas_dev->codec_lock);
> + ret = devm_snd_soc_register_component(tas_dev->dev,
> + &soc_codec_driver_tasdevice,
> + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver));
> + if (ret) {
> + dev_err(tas_dev->dev, "%s: codec register error:%d.\n",
> + __func__, ret);
return ret?
> + }
> +
> + tas2783_reset(tas_dev);
> + /* tas2783-8[9,...,f].bin was copied into /lib/firmware/ */
> + scnprintf(tas_dev->rca_binaryname, 64, "tas2783-%01x.bin",
> + tas_dev->sdw_peripheral->id.unique_id);
> +
> + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
> + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL,
> + tas_dev, tasdevice_rca_ready);
> + if (ret) {
> + dev_dbg(tas_dev->dev,
> + "%s: request_firmware %x open status: %d.\n",
> + __func__, tas_dev->sdw_peripheral->id.unique_id, ret);
> + }
> +
> + /* set autosuspend parameters */
> + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000);
> + pm_runtime_use_autosuspend(tas_dev->dev);
> +
> + /* make sure the device does not suspend immediately */
> + pm_runtime_mark_last_busy(tas_dev->dev);
> +
> + pm_runtime_enable(tas_dev->dev);
> +
> + dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__);
> +
> + return ret;
> +}
> +
> +static int tasdevice_read_prop(struct sdw_slave *slave)
> +{
> + struct sdw_slave_prop *prop = &slave->prop;
> + int nval;
> + int i, j;
> + u32 bit;
> + unsigned long addr;
> + struct sdw_dpn_prop *dpn;
> +
> + prop->scp_int1_mask =
> + SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
> + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
> +
> + prop->paging_support = true;
> +
> + /* first we need to allocate memory for set bits in port lists */
> + prop->source_ports = BIT(2); /* BITMAP: 00000100 */
> + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */
> +
> + nval = hweight32(prop->source_ports);
> + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
> + sizeof(*prop->src_dpn_prop), GFP_KERNEL);
> + if (!prop->src_dpn_prop)
> + return -ENOMEM;
> +
> + i = 0;
> + dpn = prop->src_dpn_prop;
> + addr = prop->source_ports;
> + for_each_set_bit(bit, &addr, 32) {
> + dpn[i].num = bit;
> + dpn[i].type = SDW_DPN_FULL;
> + dpn[i].simple_ch_prep_sm = true;
> + dpn[i].ch_prep_timeout = 10;
> + i++;
> + }
> +
> + /* do this again for sink now */
> + nval = hweight32(prop->sink_ports);
> + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
> + sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
> + if (!prop->sink_dpn_prop)
> + return -ENOMEM;
> +
> + j = 0;
> + dpn = prop->sink_dpn_prop;
> + addr = prop->sink_ports;
> + for_each_set_bit(bit, &addr, 32) {
> + dpn[j].num = bit;
> + dpn[j].type = SDW_DPN_FULL;
> + dpn[j].simple_ch_prep_sm = true;
> + dpn[j].ch_prep_timeout = 10;
> + j++;
> + }
> +
> + /* set the timeout values */
> + prop->clk_stop_timeout = 20;
> +
> + return 0;
> +}
> +
> +static int tasdevice_io_init(struct device *dev, struct sdw_slave *slave)
> +{
> + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
> +
> + if (tas_priv->hw_init)
> + return 0;
> +
> + if (tas_priv->first_hw_init) {
> + regcache_cache_only(tas_priv->regmap, false);
> + regcache_cache_bypass(tas_priv->regmap, true);
> + } else {
> + /*
> + * PM runtime is only enabled when a Slave reports as Attached
> + */
> +
> + /* set autosuspend parameters */
> + pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
> + pm_runtime_use_autosuspend(&slave->dev);
> +
> + /* update count of parent 'active' children */
> + pm_runtime_set_active(&slave->dev);
> +
> + /* make sure the device does not suspend immediately */
> + pm_runtime_mark_last_busy(&slave->dev);
> +
> + pm_runtime_enable(&slave->dev);
> + }
> +
> + pm_runtime_get_noresume(&slave->dev);
> +
> + /* sw reset */
> + regmap_write(tas_priv->regmap, 0x8001, 0x01);
> +
> + if (tas_priv->first_hw_init) {
> + regcache_cache_bypass(tas_priv->regmap, false);
> + regcache_mark_dirty(tas_priv->regmap);
> + } else
> + tas_priv->first_hw_init = true;
> + /* Mark Slave initialization complete */
> + tas_priv->hw_init = true;
> +
> + return 0;
> +}
> +
> +static int tasdevice_update_status(struct sdw_slave *slave,
> + enum sdw_slave_status status)
> +{
> + struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev);
> +
> + /* Update the status */
> + tas_priv->status = status;
> +
> + if (status == SDW_SLAVE_UNATTACHED)
> + tas_priv->hw_init = false;
> +
> + /* Perform initialization only if slave status
> + * is present and hw_init flag is false
> + */
> + if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED)
> + return 0;
> +
> + /* perform I/O transfers required for Slave initialization */
> + return tasdevice_io_init(&slave->dev, slave);
> +}
> +
> +/*
> + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and
> + * port_prep are not defined for now
> + */
> +static const struct sdw_slave_ops tasdevice_sdw_ops = {
> + .read_prop = tasdevice_read_prop,
> + .update_status = tasdevice_update_status,
> +};
> +
> +static void tasdevice_remove(struct tasdevice_priv *tas_dev)
> +{
> + mutex_destroy(&tas_dev->codec_lock);
> +}
> +
> +static int tasdevice_sdw_probe(struct sdw_slave *peripheral,
> + const struct sdw_device_id *id)
> +{
> + struct device *dev = &peripheral->dev;
> + struct tasdevice_priv *tas_dev;
> + int ret;
> +
> + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL);
> + if (!tas_dev)
> + return -ENOMEM;
> +
> + tas_dev->dev = dev;
> + tas_dev->chip_id = id->driver_data;
> + tas_dev->sdw_peripheral = peripheral;
> + /*
> + * Mark hw_init to false
> + * HW init will be performed when device reports present
> + */
> + tas_dev->hw_init = false;
> + tas_dev->first_hw_init = false;
> +
> + dev_set_drvdata(dev, tas_dev);
> +
> + tas_dev->regmap = devm_regmap_init_sdw(peripheral,
> + &tasdevice_regmap);
> + if (IS_ERR(tas_dev->regmap)) {
> + ret = PTR_ERR(tas_dev->regmap);
> + dev_err(dev, "Failed %d of devm_regmap_init_sdw.", ret);
return ret?
> + } else
> + ret = tasdevice_init(tas_dev);
> +
> + if (ret < 0)
> + tasdevice_remove(tas_dev);
> +
> + return ret;
> +}
> +
> +static int tasdevice_sdw_remove(struct sdw_slave *peripheral)
> +{
> + struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev);
> +
> + if (tas_dev->first_hw_init)
> + pm_runtime_disable(tas_dev->dev);
> + tasdevice_remove(tas_dev);
> +
> + return 0;
> +}
> +
> +static const struct sdw_device_id tasdevice_sdw_id[] = {
> + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0),
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id);
> +
> +static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev)
> +{
> + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
> +
> + if (!tas_priv->hw_init)
> + return 0;
> +
> + regcache_cache_only(tas_priv->regmap, true);
> +
> + return 0;
> +}
> +
> +#define TAS2783_PROBE_TIMEOUT 5000
> +
> +static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev)
> +{
> + struct sdw_slave *slave = dev_to_sdw_dev(dev);
> + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
> + unsigned long time;
> +
> + if (!tas_priv->first_hw_init)
> + return 0;
> +
> + if (!slave->unattach_request)
> + goto regmap_sync;
> +
> + time = wait_for_completion_timeout(&slave->initialization_complete,
> + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT));
> + if (!time) {
> + dev_err(&slave->dev, "Init not complete, timed out\n");
> + sdw_show_ping_status(slave->bus, true);
> +
> + return -ETIMEDOUT;
> + }
> +
> +regmap_sync:
> + slave->unattach_request = 0;
> + regcache_cache_only(tas_priv->regmap, false);
> + regcache_sync(tas_priv->regmap);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops tas2783_sdca_pm = {
> + SET_SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend,
> + tas2783_sdca_dev_resume)
> + SET_RUNTIME_PM_OPS(tas2783_sdca_dev_suspend,
> + tas2783_sdca_dev_resume, NULL)
> +};
> +
> +static struct sdw_driver tasdevice_sdw_driver = {
> + .driver = {
> + .name = "slave-tas2783",
> + .pm = &tas2783_sdca_pm,
> + },
> + .probe = tasdevice_sdw_probe,
> + .remove = tasdevice_sdw_remove,
> + .ops = &tasdevice_sdw_ops,
> + .id_table = tasdevice_sdw_id,
> +};
> +
> +module_sdw_driver(tasdevice_sdw_driver);
> +
> +MODULE_AUTHOR("Baojun Xu <[email protected]>");
> +MODULE_AUTHOR("Shenghao Ding <[email protected]>");
> +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h
> new file mode 100644
> index 000000000000..703b2c0b78a6
> --- /dev/null
> +++ b/sound/soc/codecs/tas2783.h
> @@ -0,0 +1,97 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + *
> + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier
> + *
> + * Copyright (C) 2023 - 2024 Texas Instruments Incorporated
> + * https://www.ti.com
> + *
> + * Author: Baojun Xu <[email protected]>
> + * Shenghao Ding <[email protected]>
> + */
> +
> +#ifndef __TAS2783_H__
> +#define __TAS2783_H__
> +
> +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \
> + SNDRV_PCM_RATE_48000 | \
> + SNDRV_PCM_RATE_96000 | \
> + SNDRV_PCM_RATE_88200)
> +
> +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
> + SNDRV_PCM_FMTBIT_S24_LE | \
> + SNDRV_PCM_FMTBIT_S32_LE)
> +
> +/* BOOK, PAGE Control Register */
> +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 + \
> + (page * 128) + reg)
> +
> +/*Software Reset */
> +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01)
be consistent:
TASDEVICE_REG(0x0, 0x0, 0x01)
> +
> +/* Volume control */
> +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1A)
0x0 for consistency
indentation is a bit weird in many lines
> +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03)
> +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1)
> +
> +/* Calibration data */
> +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74)
> +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14)
> +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c)
> +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x13, 0x70)
> +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c)
> +
> +/* Unique id start */
> +#define TAS2783_ID_MIN 0x08
> +/* Unique id end */
> +#define TAS2783_ID_MAX 0x0F
> +
> +/* TAS2783 SDCA Control - function number */
> +#define TAS2783_FUNC_TYPE_SMART_AMP 0x01
> +
> +/* TAS2783 SDCA entity */
> +#define TAS2783_SDCA_ENT_FU21 0x01
> +#define TAS2783_SDCA_ENT_FU23 0x02
> +
> +/* TAS2783 SDCA control */
> +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01
> +#define TAS2783_SDCA_CTL_FU_MUTE 0x01
> +#define TAS2783_SDCA_CTL_FU_VOLUME 0x02
> +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10
> +
> +#define TAS2783_DEVICE_CHANNEL_LEFT 1
> +#define TAS2783_DEVICE_CHANNEL_RIGHT 2
> +
> +#define TAS2783_MAX_CALIDATA_SIZE 252
> +
> +struct tas2783_firmware_node {
> + unsigned int vendor_id;
> + unsigned int file_id;
> + unsigned int version_id;
> + unsigned int length;
> + unsigned int download_addr;
> +};
> +
> +struct calibration_data {
> + unsigned long total_sz;
> + unsigned char data[TAS2783_MAX_CALIDATA_SIZE];
> +};
> +
> +struct tasdevice_priv {
> + struct snd_soc_component *component;
> + struct calibration_data cali_data;
> + struct sdw_slave *sdw_peripheral;
> + enum sdw_slave_status status;
> + struct sdw_bus_params params;
> + struct mutex codec_lock;
> + struct regmap *regmap;
> + struct device *dev;
> + struct tm tm;
> + unsigned char rca_binaryname[64];
> + unsigned char dev_name[32];
> + unsigned int chip_id;
> + bool pstream;
> + bool hw_init;
> + bool first_hw_init;
> +};
> +
> +#endif /*__TAS2783_H__ */
Regards,
Gergo
This version is much better than previous ones, but can be improved
further, specifically on the identification of firmware based on the
unique_id and pm_runtime. See additional nit-picks and suggestions below.
> ---
> Change in v5:
> - simplify tasdevice_set_sdw_stream
> - fixed some Linux coding style
> - fixed the spelling mistakes
> - Select left/right channel based on unique id
> - a longer description has been added
> - remove unused crc8 in KCONFIG
Don't you need a 'select CRC32' though? ...
Maybe it's already set by other Kconfigs.
> +/* Update the calibrate data, including speaker impedance, f0, etc, into algo.
> + * Calibrate data is done by manufacturer in the factory. These data are used
> + * by Algo for calucating the speaker temperature, speaker membrance excursion
> + * and f0 in real time during playback.
> + * In case of no or valid calibrated data, dsp will still works with default
> + * calibrated data inside algo.
suggested edits:
Load the calibration data, including speaker impedance, f0, etc.
Calibration is done by the manufacturer in the factory. The calibration
data are used by the algorithm for calculating the speaker temperature,
speaker membrance excursion and f0 in real time during playback.
The DSP will work with default data values if calibrated data are
missing or are invalid.
> +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
> +{
> + struct snd_soc_component *component = dai->component;
> + struct tasdevice_priv *tas_priv =
> + snd_soc_component_get_drvdata(component);
> + struct sdw_stream_config stream_config = {0};
> + struct sdw_port_config port_config = {0};
> + struct sdw_stream_runtime *sdw_stream;
> + int ret;
> +
> + dev_dbg(dai->dev, "%s %s", __func__, dai->name);
> + sdw_stream = snd_soc_dai_get_dma_data(dai, substream);
> +
> + if (!sdw_stream)
> + return -EINVAL;
> +
> + if (!tas_priv->sdw_peripheral)
> + return -EINVAL;
> +
> + /* SoundWire specific configuration */
> + snd_sdw_params_to_config(substream, params,
> + &stream_config, &port_config);
> +
> + /* port 1 for playback */
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> + port_config.num = 1;
> + else
> + port_config.num = 2;
> +
> + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral,
> + &stream_config, &port_config, 1, sdw_stream);
> + if (ret) {
> + dev_err(dai->dev, "Unable to configure port\n");
> + return ret;
> + }
> +
> + dev_dbg(dai->dev, "%s fomrat: %i rate: %i\n", __func__,
typo: format
> + params_format(params), params_rate(params));
> +
> + return 0;
> +}
> +
> +static int tasdevice_mute(struct snd_soc_dai *dai, int mute,
> + int direction)
> +{
> + struct snd_soc_component *component = dai->component;
> + struct tasdevice_priv *tas_dev =
> + snd_soc_component_get_drvdata(component);
> + struct regmap *map = tas_dev->regmap;
> + int ret;
> +
> + dev_dbg(tas_dev->dev, "Mute or unmute %d.\n", mute);
> +
> + if (mute) {
> + /* Echo channel can't be shutdown while tas2783 must keep
> + * working state while playback is on.
Consider rewording that comment, two 'while' in the same sentence make
it hard to parse.
> + */
> + if (direction == SNDRV_PCM_STREAM_CAPTURE
> + && tas_dev->pstream == true)
> + return 0;
> + /* FU23 mute (0x40400108) */
> + ret = regmap_write(map,
> + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
> + TAS2783_SDCA_ENT_FU23, TAS2783_SDCA_CTL_FU_MUTE, 0),
> + 1);
> + ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x1a);
ORin error codecs is not quite right
> + tas_dev->pstream = false;
> + } else {
> + /* FU23 Unmute, 0x40400108. */
> + ret = regmap_write(map,
> + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
> + TAS2783_SDCA_ENT_FU23, TAS2783_SDCA_CTL_FU_MUTE, 0),
> + 0);
> + ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x0);
> + if (direction == SNDRV_PCM_STREAM_PLAYBACK)
> + tas_dev->pstream = true;
> + }
> +
> + if (ret)
> + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n",
> + mute, ret);
> +
> + return ret;
> +}
> +
> +static int tasdevice_init(struct tasdevice_priv *tas_dev)
> +{
> + int ret;
> +
> + dev_set_drvdata(tas_dev->dev, tas_dev);
> +
> + mutex_init(&tas_dev->codec_lock);
> + ret = devm_snd_soc_register_component(tas_dev->dev,
> + &soc_codec_driver_tasdevice,
> + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver));
> + if (ret) {
> + dev_err(tas_dev->dev, "%s: codec register error:%d.\n",
> + __func__, ret);
> + }
> +
> + tas2783_reset(tas_dev);
> + /* tas2783-8[9,...,f].bin was copied into /lib/firmware/ */
You need to add a comment to explain what those files contain, it's not
clear at all if they are just 'firmware' or if they contain tables.
> + scnprintf(tas_dev->rca_binaryname, 64, "tas2783-%01x.bin",
> + tas_dev->sdw_peripheral->id.unique_id);
And more specifically the use of the unique_id is problematic since it's
only relevant in the context of one link. If you have two amps on
separate links, the unique_id is irrelevant.
> +
> + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
> + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL,
> + tas_dev, tasdevice_rca_ready);
> + if (ret) {
> + dev_dbg(tas_dev->dev,
> + "%s: request_firmware %x open status: %d.\n",
> + __func__, tas_dev->sdw_peripheral->id.unique_id, ret);
> + }
> +
> + /* set autosuspend parameters */
> + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000);
> + pm_runtime_use_autosuspend(tas_dev->dev);
> +
> + /* make sure the device does not suspend immediately */
> + pm_runtime_mark_last_busy(tas_dev->dev);
> +
> + pm_runtime_enable(tas_dev->dev);
You are handling pm_runtime here...
> +
> + dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__);
> +
> + return ret;
> +}
> +
> +static int tasdevice_read_prop(struct sdw_slave *slave)
> +{
> + struct sdw_slave_prop *prop = &slave->prop;
> + int nval;
> + int i, j;
> + u32 bit;
> + unsigned long addr;
> + struct sdw_dpn_prop *dpn;
> +
> + prop->scp_int1_mask =
> + SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
> + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
> +
> + prop->paging_support = true;
> +
> + /* first we need to allocate memory for set bits in port lists */
> + prop->source_ports = BIT(2); /* BITMAP: 00000100 */
> + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */
> +
> + nval = hweight32(prop->source_ports);
> + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
> + sizeof(*prop->src_dpn_prop), GFP_KERNEL);
> + if (!prop->src_dpn_prop)
> + return -ENOMEM;
> +
> + i = 0;
> + dpn = prop->src_dpn_prop;
> + addr = prop->source_ports;
> + for_each_set_bit(bit, &addr, 32) {
> + dpn[i].num = bit;
> + dpn[i].type = SDW_DPN_FULL;
> + dpn[i].simple_ch_prep_sm = true;
> + dpn[i].ch_prep_timeout = 10;
> + i++;
> + }
> +
> + /* do this again for sink now */
> + nval = hweight32(prop->sink_ports);
> + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
> + sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
> + if (!prop->sink_dpn_prop)
> + return -ENOMEM;
> +
> + j = 0;
> + dpn = prop->sink_dpn_prop;
> + addr = prop->sink_ports;
> + for_each_set_bit(bit, &addr, 32) {
> + dpn[j].num = bit;
> + dpn[j].type = SDW_DPN_FULL;
> + dpn[j].simple_ch_prep_sm = true;
> + dpn[j].ch_prep_timeout = 10;
> + j++;
> + }
> +
> + /* set the timeout values */
> + prop->clk_stop_timeout = 20;
> +
> + return 0;
> +}
> +
> +static int tasdevice_io_init(struct device *dev, struct sdw_slave *slave)
> +{
> + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
> +
> + if (tas_priv->hw_init)
> + return 0;
> +
> + if (tas_priv->first_hw_init) {
> + regcache_cache_only(tas_priv->regmap, false);
> + regcache_cache_bypass(tas_priv->regmap, true);
> + } else {
> + /*
> + * PM runtime is only enabled when a Slave reports as Attached
> + */
> +
> + /* set autosuspend parameters */
> + pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
> + pm_runtime_use_autosuspend(&slave->dev);
> +
> + /* update count of parent 'active' children */
> + pm_runtime_set_active(&slave->dev);
> +
> + /* make sure the device does not suspend immediately */
> + pm_runtime_mark_last_busy(&slave->dev);
> +
> + pm_runtime_enable(&slave->dev);
.. and here.
This isn't quite right, you should only use set_active() here and move
all other parts in the probe.
> + }
> +
> + pm_runtime_get_noresume(&slave->dev);
> +
> + /* sw reset */
> + regmap_write(tas_priv->regmap, 0x8001, 0x01);
> +
> + if (tas_priv->first_hw_init) {
> + regcache_cache_bypass(tas_priv->regmap, false);
> + regcache_mark_dirty(tas_priv->regmap);
> + } else
> + tas_priv->first_hw_init = true;
> + /* Mark Slave initialization complete */
> + tas_priv->hw_init = true;
if you do a get_noresume() you've got to do a put_noidle() here for
symmetry.
> +
> + return 0;
> +}
> +
Thanks for your review comment.
> -----Original Message-----
> From: Pierre-Louis Bossart <[email protected]>
> Sent: Monday, January 15, 2024 5:34 PM
> To: Ding, Shenghao <[email protected]>; [email protected]
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected]; Xu, Baojun
> <[email protected]>; Lu, Kevin <[email protected]>; Gupta, Peeyush
> <[email protected]>; Navada Kanyana, Mukund <[email protected]>;
> [email protected]
> Subject: [EXTERNAL] Re: [PATCH v5] ASoc: tas2783: Add tas2783 codec
> driver
>
> This version is much better than previous ones, but can be improved further,
> specifically on the identification of firmware based on the unique_id and
> pm_runtime. See additional nit-picks and suggestions below.
>
>
> > ---
> > Change in v5:
> > - simplify tasdevice_set_sdw_stream
> > - fixed some Linux coding style
> > - fixed the spelling mistakes
> > - Select left/right channel based on unique id
> > - a longer description has been added
> > - remove unused crc8 in KCONFIG
>
> Don't you need a 'select CRC32' though? ...
>
> Maybe it's already set by other Kconfigs.
>
>
> > +/* Update the calibrate data, including speaker impedance, f0, etc, into
> algo.
> > + * Calibrate data is done by manufacturer in the factory. These data
> > +are used
> > + * by Algo for calucating the speaker temperature, speaker membrance
> > +excursion
> > + * and f0 in real time during playback.
> > + * In case of no or valid calibrated data, dsp will still works with
> > +default
> > + * calibrated data inside algo.
>
> suggested edits:
>
> Load the calibration data, including speaker impedance, f0, etc.
> Calibration is done by the manufacturer in the factory. The calibration data
> are used by the algorithm for calculating the speaker temperature, speaker
> membrance excursion and f0 in real time during playback.
> The DSP will work with default data values if calibrated data are missing or
> are invalid.
>
>
> > +static int tasdevice_sdw_hw_params(struct snd_pcm_substream
> *substream,
> > + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) {
> > + struct snd_soc_component *component = dai->component;
> > + struct tasdevice_priv *tas_priv =
> > + snd_soc_component_get_drvdata(component);
> > + struct sdw_stream_config stream_config = {0};
> > + struct sdw_port_config port_config = {0};
> > + struct sdw_stream_runtime *sdw_stream;
> > + int ret;
> > +
> > + dev_dbg(dai->dev, "%s %s", __func__, dai->name);
> > + sdw_stream = snd_soc_dai_get_dma_data(dai, substream);
> > +
> > + if (!sdw_stream)
> > + return -EINVAL;
> > +
> > + if (!tas_priv->sdw_peripheral)
> > + return -EINVAL;
> > +
> > + /* SoundWire specific configuration */
> > + snd_sdw_params_to_config(substream, params,
> > + &stream_config, &port_config);
> > +
> > + /* port 1 for playback */
> > + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > + port_config.num = 1;
> > + else
> > + port_config.num = 2;
> > +
> > + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral,
> > + &stream_config, &port_config, 1, sdw_stream);
> > + if (ret) {
> > + dev_err(dai->dev, "Unable to configure port\n");
> > + return ret;
> > + }
> > +
> > + dev_dbg(dai->dev, "%s fomrat: %i rate: %i\n", __func__,
>
> typo: format
>
> > + params_format(params), params_rate(params));
> > +
> > + return 0;
> > +}
> > +
>
> > +static int tasdevice_mute(struct snd_soc_dai *dai, int mute,
> > + int direction)
> > +{
> > + struct snd_soc_component *component = dai->component;
> > + struct tasdevice_priv *tas_dev =
> > + snd_soc_component_get_drvdata(component);
> > + struct regmap *map = tas_dev->regmap;
> > + int ret;
> > +
> > + dev_dbg(tas_dev->dev, "Mute or unmute %d.\n", mute);
> > +
> > + if (mute) {
> > + /* Echo channel can't be shutdown while tas2783 must keep
> > + * working state while playback is on.
>
> Consider rewording that comment, two 'while' in the same sentence make it
> hard to parse.
>
> > + */
> > + if (direction == SNDRV_PCM_STREAM_CAPTURE
> > + && tas_dev->pstream == true)
> > + return 0;
> > + /* FU23 mute (0x40400108) */
> > + ret = regmap_write(map,
> > + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
> > + TAS2783_SDCA_ENT_FU23,
> TAS2783_SDCA_CTL_FU_MUTE, 0),
> > + 1);
> > + ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x1a);
>
> ORin error codecs is not quite right
>
> > + tas_dev->pstream = false;
> > + } else {
> > + /* FU23 Unmute, 0x40400108. */
> > + ret = regmap_write(map,
> > + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
> > + TAS2783_SDCA_ENT_FU23,
> TAS2783_SDCA_CTL_FU_MUTE, 0),
> > + 0);
> > + ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x0);
> > + if (direction == SNDRV_PCM_STREAM_PLAYBACK)
> > + tas_dev->pstream = true;
> > + }
> > +
> > + if (ret)
> > + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n",
> > + mute, ret);
> > +
> > + return ret;
> > +}
> > +
>
> > +static int tasdevice_init(struct tasdevice_priv *tas_dev) {
> > + int ret;
> > +
> > + dev_set_drvdata(tas_dev->dev, tas_dev);
> > +
> > + mutex_init(&tas_dev->codec_lock);
> > + ret = devm_snd_soc_register_component(tas_dev->dev,
> > + &soc_codec_driver_tasdevice,
> > + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver));
> > + if (ret) {
> > + dev_err(tas_dev->dev, "%s: codec register error:%d.\n",
> > + __func__, ret);
> > + }
> > +
> > + tas2783_reset(tas_dev);
> > + /* tas2783-8[9,...,f].bin was copied into /lib/firmware/ */
>
> You need to add a comment to explain what those files contain, it's not clear
> at all if they are just 'firmware' or if they contain tables.
>
> > + scnprintf(tas_dev->rca_binaryname, 64, "tas2783-%01x.bin",
> > + tas_dev->sdw_peripheral->id.unique_id);
>
> And more specifically the use of the unique_id is problematic since it's only
> relevant in the context of one link. If you have two amps on separate links,
> the unique_id is irrelevant.
>
> > +
> > + ret = request_firmware_nowait(THIS_MODULE,
> FW_ACTION_UEVENT,
> > + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL,
> > + tas_dev, tasdevice_rca_ready);
> > + if (ret) {
> > + dev_dbg(tas_dev->dev,
> > + "%s: request_firmware %x open status: %d.\n",
> > + __func__, tas_dev->sdw_peripheral->id.unique_id, ret);
> > + }
> > +
> > + /* set autosuspend parameters */
> > + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000);
> > + pm_runtime_use_autosuspend(tas_dev->dev);
> > +
> > + /* make sure the device does not suspend immediately */
> > + pm_runtime_mark_last_busy(tas_dev->dev);
> > +
> > + pm_runtime_enable(tas_dev->dev);
>
> You are handling pm_runtime here...
>
> > +
> > + dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__);
> > +
> > + return ret;
> > +}
> > +
> > +static int tasdevice_read_prop(struct sdw_slave *slave) {
> > + struct sdw_slave_prop *prop = &slave->prop;
> > + int nval;
> > + int i, j;
> > + u32 bit;
> > + unsigned long addr;
> > + struct sdw_dpn_prop *dpn;
> > +
> > + prop->scp_int1_mask =
> > + SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
> > + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
> > +
> > + prop->paging_support = true;
> > +
> > + /* first we need to allocate memory for set bits in port lists */
> > + prop->source_ports = BIT(2); /* BITMAP: 00000100 */
> > + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */
> > +
> > + nval = hweight32(prop->source_ports);
> > + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
> > + sizeof(*prop->src_dpn_prop), GFP_KERNEL);
> > + if (!prop->src_dpn_prop)
> > + return -ENOMEM;
> > +
> > + i = 0;
> > + dpn = prop->src_dpn_prop;
> > + addr = prop->source_ports;
> > + for_each_set_bit(bit, &addr, 32) {
> > + dpn[i].num = bit;
> > + dpn[i].type = SDW_DPN_FULL;
> > + dpn[i].simple_ch_prep_sm = true;
> > + dpn[i].ch_prep_timeout = 10;
> > + i++;
> > + }
> > +
> > + /* do this again for sink now */
> > + nval = hweight32(prop->sink_ports);
> > + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
> > + sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
> > + if (!prop->sink_dpn_prop)
> > + return -ENOMEM;
> > +
> > + j = 0;
> > + dpn = prop->sink_dpn_prop;
> > + addr = prop->sink_ports;
> > + for_each_set_bit(bit, &addr, 32) {
> > + dpn[j].num = bit;
> > + dpn[j].type = SDW_DPN_FULL;
> > + dpn[j].simple_ch_prep_sm = true;
> > + dpn[j].ch_prep_timeout = 10;
> > + j++;
> > + }
> > +
> > + /* set the timeout values */
> > + prop->clk_stop_timeout = 20;
> > +
> > + return 0;
> > +}
> > +
> > +static int tasdevice_io_init(struct device *dev, struct sdw_slave
> > +*slave) {
> > + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
> > +
> > + if (tas_priv->hw_init)
> > + return 0;
> > +
> > + if (tas_priv->first_hw_init) {
> > + regcache_cache_only(tas_priv->regmap, false);
> > + regcache_cache_bypass(tas_priv->regmap, true);
> > + } else {
> > + /*
> > + * PM runtime is only enabled when a Slave reports as
> Attached
> > + */
> > +
> > + /* set autosuspend parameters */
> > + pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
> > + pm_runtime_use_autosuspend(&slave->dev);
> > +
> > + /* update count of parent 'active' children */
> > + pm_runtime_set_active(&slave->dev);
> > +
> > + /* make sure the device does not suspend immediately */
> > + pm_runtime_mark_last_busy(&slave->dev);
> > +
> > + pm_runtime_enable(&slave->dev);
>
> ... and here.
>
> This isn't quite right, you should only use set_active() here and move all other
> parts in the probe.
>
> > + }
> > +
> > + pm_runtime_get_noresume(&slave->dev);
> > +
> > + /* sw reset */
> > + regmap_write(tas_priv->regmap, 0x8001, 0x01);
> > +
> > + if (tas_priv->first_hw_init) {
> > + regcache_cache_bypass(tas_priv->regmap, false);
> > + regcache_mark_dirty(tas_priv->regmap);
> > + } else
> > + tas_priv->first_hw_init = true;
> > + /* Mark Slave initialization complete */
> > + tas_priv->hw_init = true;
>
> if you do a get_noresume() you've got to do a put_noidle() here for
> symmetry.
>
> > +
> > + return 0;
> > +}
> > +
Thanks for your review comment.
> -----Original Message-----
> From: Gergo Koteles <[email protected]>
> Sent: Monday, January 15, 2024 8:20 AM
> To: Ding, Shenghao <[email protected]>; [email protected]
> Cc: [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected]; linux-
> [email protected]; [email protected];
> [email protected]; [email protected]; Xu, Baojun
> <[email protected]>; Lu, Kevin <[email protected]>; Gupta, Peeyush
> <[email protected]>; Navada Kanyana, Mukund <[email protected]>;
> [email protected]
> Subject: [EXTERNAL] Re: [PATCH v5] ASoc: tas2783: Add tas2783 codec
> driver
>
> Hi Shenghao,
>
> On Sat, 2024-01-13 at 19:49 +0800, Shenghao Ding wrote:
> ...
>
> > +static const unsigned int tas2783_cali_reg[] = {
> > + TAS2783_CALIBRATION_RE, /* Resistance */
> > + TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */
> > + TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */
> > + TAS2783_CALIBRATION_POW, /* RMS Power */
> > + TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */
> > +};
> ...
> > +static void tas2783_apply_calib(struct tasdevice_priv *tas_dev,
> > + unsigned int *cali_data)
> > +{
> > + struct regmap *map = tas_dev->regmap;
> > + u8 *reg_start;
> > + int ret;
> > +
> > + if (!tas_dev->sdw_peripheral) {
> > + dev_err(tas_dev->dev, "%s, slaver doesn't exist.\n",
> > + __func__);
> > + return;
> > + }
> > + if ((tas_dev->sdw_peripheral->id.unique_id < TAS2783_ID_MIN) ||
> > + (tas_dev->sdw_peripheral->id.unique_id > TAS2783_ID_MAX))
> {
> > + dev_err(tas_dev->dev, "%s, error unique_id.\n",
> > + __func__);
> > + return;
> > + }
> > +
> > + reg_start = (u8 *)(cali_data + (tas_dev->sdw_peripheral-
> >id.unique_id
> > + - TAS2783_ID_MIN) * sizeof(tas2783_cali_reg));
> > + for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) {
> > + ret = regmap_bulk_write(map, tas2783_cali_reg[i],
> > + reg_start + i, 4);
>
> reg_start is u8, reg_start + i only adds i byte.
> I think it should be reg_start + i * 4, because the calibration values are
> unsigned ints.
>
> > + if (ret != 0) {
> > + dev_err(tas_dev->dev, "Cali failed %x:%d\n",
> > + tas2783_cali_reg[i], ret);
> > + break;
> > + }
> > + }
> > +}
> > +
> > +/* Update the calibrate data, including speaker impedance, f0, etc, into
> algo.
> > + * Calibrate data is done by manufacturer in the factory. These data
> > +are used
> > + * by Algo for calucating the speaker temperature, speaker membrance
> > +excursion
> > + * and f0 in real time during playback.
> > + * In case of no or valid calibrated data, dsp will still works with
> > +default
> > + * calibrated data inside algo.
> > + */
>
> calibration data, Calibration data, calculating, membrane
>
> > +static int tas2783_calibration(struct tasdevice_priv *tas_dev) {
> > + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc,
> > + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
> > + static efi_char16_t efi_name[] = L"CALI_DATA";
> > + struct tm *tm = &tas_dev->tm;
> > + unsigned int attr = 0, crc;
> > + unsigned int *tmp_val;
> > + efi_status_t status;
> > +
> > + tas_dev->cali_data.total_sz = 128;
>
> Where does 128 come from? The tas_dev->cali_data.data is a 252 byte
> buffer.
>
> #define TAS2783_MAX_CALIDATA_SIZE 252
>
> struct calibration_data {
> unsigned long total_sz;
> unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; };
>
>
> > +
> > + status = efi.get_variable(efi_name, &efi_guid, &attr,
> > + &tas_dev->cali_data.total_sz, tas_dev->cali_data.data);
> > + if (status == EFI_BUFFER_TOO_SMALL) {
> > + status = efi.get_variable(efi_name, &efi_guid, &attr,
> > + &tas_dev->cali_data.total_sz,
> > + tas_dev->cali_data.data);
>
> The first efi.get_variable call updates the total_sz, and the second
> efi.get_variable can write more than 252 bytes. (if the efi variable is bigger)
>
> I don't think you can handle the EFI_BUFFER_TOO_SMALL case, if you only
> want to use the fixed size buffer.
>
>
>
> > + dev_dbg(tas_dev->dev, "cali get %lx bytes result:%ld\n",
> > + tas_dev->cali_data.total_sz, status);
> > + }
> > + if (status != 0) {
> status != EFI_SUCCESS
> > + /* Failed got calibration data from EFI. */
> > + dev_dbg(tas_dev->dev, "No calibration data in UEFI.");
> > + return 0;
> > + }
> > +
> > + tmp_val = (unsigned int *)tas_dev->cali_data.data;
> > +
> > + crc = crc32(~0, tas_dev->cali_data.data, 84) ^ ~0;
> > +
> > + if (crc == tmp_val[21]) {
> > + /* Date and time of calibration was done. */
> > + time64_to_tm(tmp_val[20], 0, tm);
> > + dev_dbg(tas_dev->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n",
> > + tm->tm_year, tm->tm_mon, tm->tm_mday,
> > + tm->tm_hour, tm->tm_min, tm->tm_sec);
> > + tas2783_apply_calib(tas_dev, tmp_val);
> > + } else {
> > + dev_dbg(tas_dev->dev, "CRC 0x%08x not match 0x%08x\n",
> > + crc, tmp_val[21]);
> > + tas_dev->cali_data.total_sz = 0;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void tasdevice_rca_ready(const struct firmware *fmw,
> > + void *context)
> > +{
> > + struct tasdevice_priv *tas_dev =
> > + (struct tasdevice_priv *) context;
> > + struct tas2783_firmware_node *p;
> > + struct regmap *map = tas_dev->regmap;
> > + unsigned char *buf = NULL;
> > + int offset = 0, img_sz;
> > + int ret, value_sdw;
> > +
> > + mutex_lock(&tas_dev->codec_lock);
> > +
> > + if (!fmw || !fmw->data) {
> > + /* No firmware binary, devices will work in ROM mode. */
> > + dev_err(tas_dev->dev,
> > + "Failed to read %s, no side-effect on driver\n",
> > + tas_dev->rca_binaryname);
> > + ret = -EINVAL;
> > + goto out;
> > + }
> > + buf = (unsigned char *)fmw->data;
> > +
> > + img_sz = le32_to_cpup((__le32 *)&buf[offset]);
> > + offset += sizeof(img_sz);
> > + if (img_sz != fmw->size) {
> > + dev_err(tas_dev->dev, "Size not matching, %d %u",
> > + (int)fmw->size, img_sz);
> > + ret = -EINVAL;
> > + goto out;
> > + }
> > +
> > + while (offset < img_sz) {
> > + p = (struct tas2783_firmware_node *)(buf + offset);
> > + if (p->length > 1) {
> > + ret = regmap_bulk_write(map, p->download_addr,
> > + buf + offset + sizeof(unsigned int)*5, p->length);
> > + } else
> > + ret = regmap_write(map, p->download_addr,
> > + *(buf + offset + sizeof(unsigned int) * 5));
> > +
> > + if (ret != 0) {
> > + dev_dbg(tas_dev->dev, "Load FW fail: %d.\n", ret);
> > + goto out;
> > + }
> > + offset += sizeof(unsigned int)*5 + p->length;
> > + }
> > + /* Select left/right channel based on unique id. */
> > + value_sdw = 0x1a;
> > + value_sdw += ((tas_dev->sdw_peripheral->dev_num & 1) << 4);
> > + dev_dbg(tas_dev->dev, "%s dev_num = %u", __func__,
> > + tas_dev->sdw_peripheral->dev_num);
> > + regmap_write(map, TASDEVICE_REG(0, 0, 0x0a), value_sdw);
>
> You can add a define for TASDEVICE_REG(0, 0, 0x0a)
>
> > +
> > + tas2783_calibration(tas_dev);
> > +
> > +out:
> > + mutex_unlock(&tas_dev->codec_lock);
> > + if (fmw)
> > + release_firmware(fmw);
> > +}
> > +
> > +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = {
> > + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM,
> 0, 0),
> > + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0,
> SND_SOC_NOPM,
> > + 0, 0),
> > + SND_SOC_DAPM_OUTPUT("OUT"),
> > + SND_SOC_DAPM_INPUT("DMIC")
> > +};
> > +
> > +static const struct snd_soc_dapm_route tasdevice_audio_map[] = {
> > + {"OUT", NULL, "ASI"},
> > + {"ASI OUT", NULL, "DMIC"}
> > +};
> > +
> > +static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai,
> > + void *sdw_stream, int direction)
> > +{
> > + snd_soc_dai_dma_data_set(dai, direction, sdw_stream);
> > +
> > + return 0;
> > +}
> > +
> > +static void tasdevice_sdw_shutdown(struct snd_pcm_substream
> *substream,
> > + struct snd_soc_dai *dai)
> > +{
> > + snd_soc_dai_set_dma_data(dai, substream, NULL); }
> > +
> > +static int tasdevice_sdw_hw_params(struct snd_pcm_substream
> *substream,
> > + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) {
> > + struct snd_soc_component *component = dai->component;
> > + struct tasdevice_priv *tas_priv =
> > + snd_soc_component_get_drvdata(component);
> > + struct sdw_stream_config stream_config = {0};
> > + struct sdw_port_config port_config = {0};
> > + struct sdw_stream_runtime *sdw_stream;
> > + int ret;
> > +
> > + dev_dbg(dai->dev, "%s %s", __func__, dai->name);
> > + sdw_stream = snd_soc_dai_get_dma_data(dai, substream);
> > +
> > + if (!sdw_stream)
> > + return -EINVAL;
> > +
> > + if (!tas_priv->sdw_peripheral)
> > + return -EINVAL;
> > +
> > + /* SoundWire specific configuration */
> > + snd_sdw_params_to_config(substream, params,
> > + &stream_config, &port_config);
> > +
> > + /* port 1 for playback */
> > + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > + port_config.num = 1;
> > + else
> > + port_config.num = 2;
> > +
> > + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral,
> > + &stream_config, &port_config, 1, sdw_stream);
> > + if (ret) {
> > + dev_err(dai->dev, "Unable to configure port\n");
> > + return ret;
> > + }
> > +
> > + dev_dbg(dai->dev, "%s fomrat: %i rate: %i\n", __func__,
>
> format
>
> > + params_format(params), params_rate(params));
> > +
> > + return 0;
> > +}
> > +
> > +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream
> *substream,
> > + struct snd_soc_dai *dai)
> > +{
> > + struct snd_soc_component *component = dai->component;
> > + struct tasdevice_priv *tas_priv =
> > + snd_soc_component_get_drvdata(component);
> > + struct sdw_stream_runtime *sdw_stream =
> > + snd_soc_dai_get_dma_data(dai, substream);
> > +
> > + if (!tas_priv->sdw_peripheral)
> > + return -EINVAL;
> > +
> > + sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream);
> > +
> > + return 0;
> > +}
> > +
> > +static int tasdevice_mute(struct snd_soc_dai *dai, int mute,
> > + int direction)
> > +{
> > + struct snd_soc_component *component = dai->component;
> > + struct tasdevice_priv *tas_dev =
> > + snd_soc_component_get_drvdata(component);
> > + struct regmap *map = tas_dev->regmap;
> > + int ret;
> > +
> > + dev_dbg(tas_dev->dev, "Mute or unmute %d.\n", mute);
> > +
> > + if (mute) {
> > + /* Echo channel can't be shutdown while tas2783 must keep
> > + * working state while playback is on.
> > + */
> > + if (direction == SNDRV_PCM_STREAM_CAPTURE
> > + && tas_dev->pstream == true)
> > + return 0;
> > + /* FU23 mute (0x40400108) */
> > + ret = regmap_write(map,
> > + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
> > + TAS2783_SDCA_ENT_FU23,
> TAS2783_SDCA_CTL_FU_MUTE, 0),
> > + 1);
> > + ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x1a);
> > + tas_dev->pstream = false;
> > + } else {
> > + /* FU23 Unmute, 0x40400108. */
> > + ret = regmap_write(map,
> > + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
> > + TAS2783_SDCA_ENT_FU23,
> TAS2783_SDCA_CTL_FU_MUTE, 0),
> > + 0);
> > + ret |= regmap_write(map, TASDEVICE_REG(0, 0, 0x02), 0x0);
> > + if (direction == SNDRV_PCM_STREAM_PLAYBACK)
> > + tas_dev->pstream = true;
> > + }
> > +
> > + if (ret)
> > + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n",
> > + mute, ret);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct snd_soc_dai_ops tasdevice_dai_ops = {
> > + .mute_stream = tasdevice_mute,
> > + .hw_params = tasdevice_sdw_hw_params,
> > + .hw_free = tasdevice_sdw_pcm_hw_free,
> > + .set_stream = tasdevice_set_sdw_stream,
> > + .shutdown = tasdevice_sdw_shutdown,
> > +};
> > +
> > +static struct snd_soc_dai_driver tasdevice_dai_driver[] = {
> > + {
> > + .name = "tas2783-codec",
> > + .id = 0,
> > + .playback = {
> > + .stream_name = "Playback",
> > + .channels_min = 1,
> > + .channels_max = 4,
> > + .rates = TAS2783_DEVICE_RATES,
> > + .formats = TAS2783_DEVICE_FORMATS,
> > + },
> > + .capture = {
> > + .stream_name = "Capture",
> > + .channels_min = 1,
> > + .channels_max = 4,
> > + .rates = TAS2783_DEVICE_RATES,
> > + .formats = TAS2783_DEVICE_FORMATS,
> > + },
> > + .ops = &tasdevice_dai_ops,
> > + .symmetric_rate = 1,
> > + },
> > +};
> > +
> > +static void tas2783_reset(struct tasdevice_priv *tas_dev) {
> > + struct regmap *map = tas_dev->regmap;
> > + int ret;
> > +
> > + ret = regmap_write(map, TAS2873_REG_SWRESET, 1);
> > + if (ret) {
> > + dev_err(tas_dev->dev, "Reset failed.\n");
> > + return;
> > + }
> > + usleep_range(1000, 1050);
> > +}
> > +
> > +static int tasdevice_component_probe(struct snd_soc_component
> > +*component) {
> > + struct tasdevice_priv *tas_dev =
> > + snd_soc_component_get_drvdata(component);
> > +
> > + tas_dev->component = component;
> > +
> > + dev_dbg(tas_dev->dev, "%s was called.\n", __func__);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct snd_soc_component_driver
> > + soc_codec_driver_tasdevice = {
> > + .probe = tasdevice_component_probe,
> > + .controls = tas2783_snd_controls,
> > + .num_controls = ARRAY_SIZE(tas2783_snd_controls),
> > + .dapm_widgets = tasdevice_dapm_widgets,
> > + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets),
> > + .dapm_routes = tasdevice_audio_map,
> > + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map),
> > + .idle_bias_on = 1,
> > + .endianness = 1,
> > +};
> > +
> > +static int tasdevice_init(struct tasdevice_priv *tas_dev) {
> > + int ret;
> > +
> > + dev_set_drvdata(tas_dev->dev, tas_dev);
> > +
> > + mutex_init(&tas_dev->codec_lock);
> > + ret = devm_snd_soc_register_component(tas_dev->dev,
> > + &soc_codec_driver_tasdevice,
> > + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver));
> > + if (ret) {
> > + dev_err(tas_dev->dev, "%s: codec register error:%d.\n",
> > + __func__, ret);
>
> return ret?
>
> > + }
> > +
> > + tas2783_reset(tas_dev);
> > + /* tas2783-8[9,...,f].bin was copied into /lib/firmware/ */
> > + scnprintf(tas_dev->rca_binaryname, 64, "tas2783-%01x.bin",
> > + tas_dev->sdw_peripheral->id.unique_id);
> > +
> > + ret = request_firmware_nowait(THIS_MODULE,
> FW_ACTION_UEVENT,
> > + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL,
> > + tas_dev, tasdevice_rca_ready);
> > + if (ret) {
> > + dev_dbg(tas_dev->dev,
> > + "%s: request_firmware %x open status: %d.\n",
> > + __func__, tas_dev->sdw_peripheral->id.unique_id, ret);
> > + }
> > +
> > + /* set autosuspend parameters */
> > + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000);
> > + pm_runtime_use_autosuspend(tas_dev->dev);
> > +
> > + /* make sure the device does not suspend immediately */
> > + pm_runtime_mark_last_busy(tas_dev->dev);
> > +
> > + pm_runtime_enable(tas_dev->dev);
> > +
> > + dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__);
> > +
> > + return ret;
> > +}
> > +
> > +static int tasdevice_read_prop(struct sdw_slave *slave) {
> > + struct sdw_slave_prop *prop = &slave->prop;
> > + int nval;
> > + int i, j;
> > + u32 bit;
> > + unsigned long addr;
> > + struct sdw_dpn_prop *dpn;
> > +
> > + prop->scp_int1_mask =
> > + SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
> > + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
> > +
> > + prop->paging_support = true;
> > +
> > + /* first we need to allocate memory for set bits in port lists */
> > + prop->source_ports = BIT(2); /* BITMAP: 00000100 */
> > + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */
> > +
> > + nval = hweight32(prop->source_ports);
> > + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
> > + sizeof(*prop->src_dpn_prop), GFP_KERNEL);
> > + if (!prop->src_dpn_prop)
> > + return -ENOMEM;
> > +
> > + i = 0;
> > + dpn = prop->src_dpn_prop;
> > + addr = prop->source_ports;
> > + for_each_set_bit(bit, &addr, 32) {
> > + dpn[i].num = bit;
> > + dpn[i].type = SDW_DPN_FULL;
> > + dpn[i].simple_ch_prep_sm = true;
> > + dpn[i].ch_prep_timeout = 10;
> > + i++;
> > + }
> > +
> > + /* do this again for sink now */
> > + nval = hweight32(prop->sink_ports);
> > + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
> > + sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
> > + if (!prop->sink_dpn_prop)
> > + return -ENOMEM;
> > +
> > + j = 0;
> > + dpn = prop->sink_dpn_prop;
> > + addr = prop->sink_ports;
> > + for_each_set_bit(bit, &addr, 32) {
> > + dpn[j].num = bit;
> > + dpn[j].type = SDW_DPN_FULL;
> > + dpn[j].simple_ch_prep_sm = true;
> > + dpn[j].ch_prep_timeout = 10;
> > + j++;
> > + }
> > +
> > + /* set the timeout values */
> > + prop->clk_stop_timeout = 20;
> > +
> > + return 0;
> > +}
> > +
> > +static int tasdevice_io_init(struct device *dev, struct sdw_slave
> > +*slave) {
> > + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
> > +
> > + if (tas_priv->hw_init)
> > + return 0;
> > +
> > + if (tas_priv->first_hw_init) {
> > + regcache_cache_only(tas_priv->regmap, false);
> > + regcache_cache_bypass(tas_priv->regmap, true);
> > + } else {
> > + /*
> > + * PM runtime is only enabled when a Slave reports as
> Attached
> > + */
> > +
> > + /* set autosuspend parameters */
> > + pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
> > + pm_runtime_use_autosuspend(&slave->dev);
> > +
> > + /* update count of parent 'active' children */
> > + pm_runtime_set_active(&slave->dev);
> > +
> > + /* make sure the device does not suspend immediately */
> > + pm_runtime_mark_last_busy(&slave->dev);
> > +
> > + pm_runtime_enable(&slave->dev);
> > + }
> > +
> > + pm_runtime_get_noresume(&slave->dev);
> > +
> > + /* sw reset */
> > + regmap_write(tas_priv->regmap, 0x8001, 0x01);
> > +
> > + if (tas_priv->first_hw_init) {
> > + regcache_cache_bypass(tas_priv->regmap, false);
> > + regcache_mark_dirty(tas_priv->regmap);
> > + } else
> > + tas_priv->first_hw_init = true;
> > + /* Mark Slave initialization complete */
> > + tas_priv->hw_init = true;
> > +
> > + return 0;
> > +}
> > +
> > +static int tasdevice_update_status(struct sdw_slave *slave,
> > + enum sdw_slave_status status)
> > +{
> > + struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev);
> > +
> > + /* Update the status */
> > + tas_priv->status = status;
> > +
> > + if (status == SDW_SLAVE_UNATTACHED)
> > + tas_priv->hw_init = false;
> > +
> > + /* Perform initialization only if slave status
> > + * is present and hw_init flag is false
> > + */
> > + if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED)
> > + return 0;
> > +
> > + /* perform I/O transfers required for Slave initialization */
> > + return tasdevice_io_init(&slave->dev, slave); }
> > +
> > +/*
> > + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and
> > + * port_prep are not defined for now
> > + */
> > +static const struct sdw_slave_ops tasdevice_sdw_ops = {
> > + .read_prop = tasdevice_read_prop,
> > + .update_status = tasdevice_update_status,
> > +};
> > +
> > +static void tasdevice_remove(struct tasdevice_priv *tas_dev) {
> > + mutex_destroy(&tas_dev->codec_lock);
> > +}
> > +
> > +static int tasdevice_sdw_probe(struct sdw_slave *peripheral,
> > + const struct sdw_device_id *id)
> > +{
> > + struct device *dev = &peripheral->dev;
> > + struct tasdevice_priv *tas_dev;
> > + int ret;
> > +
> > + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL);
> > + if (!tas_dev)
> > + return -ENOMEM;
> > +
> > + tas_dev->dev = dev;
> > + tas_dev->chip_id = id->driver_data;
> > + tas_dev->sdw_peripheral = peripheral;
> > + /*
> > + * Mark hw_init to false
> > + * HW init will be performed when device reports present
> > + */
> > + tas_dev->hw_init = false;
> > + tas_dev->first_hw_init = false;
> > +
> > + dev_set_drvdata(dev, tas_dev);
> > +
> > + tas_dev->regmap = devm_regmap_init_sdw(peripheral,
> > + &tasdevice_regmap);
> > + if (IS_ERR(tas_dev->regmap)) {
> > + ret = PTR_ERR(tas_dev->regmap);
> > + dev_err(dev, "Failed %d of devm_regmap_init_sdw.", ret);
>
> return ret?
>
> > + } else
> > + ret = tasdevice_init(tas_dev);
> > +
> > + if (ret < 0)
> > + tasdevice_remove(tas_dev);
> > +
> > + return ret;
> > +}
> > +
> > +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) {
> > + struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev);
> > +
> > + if (tas_dev->first_hw_init)
> > + pm_runtime_disable(tas_dev->dev);
> > + tasdevice_remove(tas_dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct sdw_device_id tasdevice_sdw_id[] = {
> > + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0),
> > + {},
> > +};
> > +
> > +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id);
> > +
> > +static int __maybe_unused tas2783_sdca_dev_suspend(struct device
> > +*dev) {
> > + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
> > +
> > + if (!tas_priv->hw_init)
> > + return 0;
> > +
> > + regcache_cache_only(tas_priv->regmap, true);
> > +
> > + return 0;
> > +}
> > +
> > +#define TAS2783_PROBE_TIMEOUT 5000
> > +
> > +static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev)
> > +{
> > + struct sdw_slave *slave = dev_to_sdw_dev(dev);
> > + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
> > + unsigned long time;
> > +
> > + if (!tas_priv->first_hw_init)
> > + return 0;
> > +
> > + if (!slave->unattach_request)
> > + goto regmap_sync;
> > +
> > + time = wait_for_completion_timeout(&slave-
> >initialization_complete,
> > +
> msecs_to_jiffies(TAS2783_PROBE_TIMEOUT));
> > + if (!time) {
> > + dev_err(&slave->dev, "Init not complete, timed out\n");
> > + sdw_show_ping_status(slave->bus, true);
> > +
> > + return -ETIMEDOUT;
> > + }
> > +
> > +regmap_sync:
> > + slave->unattach_request = 0;
> > + regcache_cache_only(tas_priv->regmap, false);
> > + regcache_sync(tas_priv->regmap);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops tas2783_sdca_pm = {
> > + SET_SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend,
> > + tas2783_sdca_dev_resume)
> > + SET_RUNTIME_PM_OPS(tas2783_sdca_dev_suspend,
> > + tas2783_sdca_dev_resume, NULL)
> > +};
> > +
> > +static struct sdw_driver tasdevice_sdw_driver = {
> > + .driver = {
> > + .name = "slave-tas2783",
> > + .pm = &tas2783_sdca_pm,
> > + },
> > + .probe = tasdevice_sdw_probe,
> > + .remove = tasdevice_sdw_remove,
> > + .ops = &tasdevice_sdw_ops,
> > + .id_table = tasdevice_sdw_id,
> > +};
> > +
> > +module_sdw_driver(tasdevice_sdw_driver);
> > +
> > +MODULE_AUTHOR("Baojun Xu <[email protected]>");
> > +MODULE_AUTHOR("Shenghao Ding <[email protected]>");
> > +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h
> > new file mode 100644 index 000000000000..703b2c0b78a6
> > --- /dev/null
> > +++ b/sound/soc/codecs/tas2783.h
> > @@ -0,0 +1,97 @@
> > +/* SPDX-License-Identifier: GPL-2.0
> > + *
> > + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier
> > + *
> > + * Copyright (C) 2023 - 2024 Texas Instruments Incorporated
> > + * https://www.ti.com
> > + *
> > + * Author: Baojun Xu <[email protected]>
> > + * Shenghao Ding <[email protected]>
> > + */
> > +
> > +#ifndef __TAS2783_H__
> > +#define __TAS2783_H__
> > +
> > +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 |
> \
> > + SNDRV_PCM_RATE_48000 | \
> > + SNDRV_PCM_RATE_96000 | \
> > + SNDRV_PCM_RATE_88200)
> > +
> > +#define TAS2783_DEVICE_FORMATS
> (SNDRV_PCM_FMTBIT_S16_LE | \
> > + SNDRV_PCM_FMTBIT_S24_LE | \
> > + SNDRV_PCM_FMTBIT_S32_LE)
> > +
> > +/* BOOK, PAGE Control Register */
> > +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000
> + \
> > + (page * 128) + reg)
> > +
> > +/*Software Reset */
> > +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0X0,
> 0x01)
>
> be consistent:
> TASDEVICE_REG(0x0, 0x0, 0x01)
>
> > +
> > +/* Volume control */
> > +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00,
> 0x1A)
> 0x0 for consistency
>
> indentation is a bit weird in many lines
>
>
> > +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00,
> 0x03)
> > +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1)
> > +
> > +/* Calibration data */
> > +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17,
> 0x74)
> > +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18,
> 0x14)
> > +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18,
> 0x0c)
> > +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0,
> 0x13, 0x70)
> > +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18,
> 0x7c)
> > +
> > +/* Unique id start */
> > +#define TAS2783_ID_MIN 0x08
> > +/* Unique id end */
> > +#define TAS2783_ID_MAX 0x0F
> > +
> > +/* TAS2783 SDCA Control - function number */
> > +#define TAS2783_FUNC_TYPE_SMART_AMP 0x01
> > +
> > +/* TAS2783 SDCA entity */
> > +#define TAS2783_SDCA_ENT_FU21 0x01
> > +#define TAS2783_SDCA_ENT_FU23 0x02
> > +
> > +/* TAS2783 SDCA control */
> > +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01
> > +#define TAS2783_SDCA_CTL_FU_MUTE 0x01
> > +#define TAS2783_SDCA_CTL_FU_VOLUME 0x02
> > +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10
> > +
> > +#define TAS2783_DEVICE_CHANNEL_LEFT 1
> > +#define TAS2783_DEVICE_CHANNEL_RIGHT 2
> > +
> > +#define TAS2783_MAX_CALIDATA_SIZE 252
> > +
> > +struct tas2783_firmware_node {
> > + unsigned int vendor_id;
> > + unsigned int file_id;
> > + unsigned int version_id;
> > + unsigned int length;
> > + unsigned int download_addr;
> > +};
> > +
> > +struct calibration_data {
> > + unsigned long total_sz;
> > + unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; };
> > +
> > +struct tasdevice_priv {
> > + struct snd_soc_component *component;
> > + struct calibration_data cali_data;
> > + struct sdw_slave *sdw_peripheral;
> > + enum sdw_slave_status status;
> > + struct sdw_bus_params params;
> > + struct mutex codec_lock;
> > + struct regmap *regmap;
> > + struct device *dev;
> > + struct tm tm;
> > + unsigned char rca_binaryname[64];
> > + unsigned char dev_name[32];
> > + unsigned int chip_id;
> > + bool pstream;
> > + bool hw_init;
> > + bool first_hw_init;
> > +};
> > +
> > +#endif /*__TAS2783_H__ */
>
> Regards,
> Gergo