Following on my report about not getting device names, they did start
showing up a bit later. That's a bit strange. There is a bug reported
in dmesg.
I'll send the kernel config if requested. Same as it's been for some days.
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66]
MMIO=[da014000-da0147ff] Max Packet=[4096]
sbp2: $Rev: 1306 $ Ben Collins <[email protected]>
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800286410000f43]
eth0: no IPv6 routers present
ieee1394: Error parsing configrom for node 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
ieee1394: Node added: ID:BUS[0-00:1023] GUID[0050c504e0006463]
scsi4 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
prev->state: 2 != TASK_RUNNING??
scsi_eh_4/7835[CPU#0]: BUG in __schedule at kernel/sched.c:3326
Call Trace:<ffffffff80132221>{__WARN_ON+97} <ffffffff803e79f0>{__schedule+608}
<ffffffff801342bf>{do_exit+1007}
<ffffffff801467c0>{keventd_create_kthread+0}
<ffffffff8010e5ed>{child_rip+15}
<ffffffff801467c0>{keventd_create_kthread+0}
<ffffffff801466b0>{kthread+0} <ffffffff8010e5de>{child_rip+0}
sbp2: probe of 0050c504e0006463-0 failed with error -16
ieee1394: Node added: ID:BUS[0-00:1023] GUID[00303c020010645c]
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
ieee1394: Node changed: 0-01:1023 -> 0-02:1023
scsi5 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-00:1023: Max speed [S800] - Max payload [4096]
Vendor: Maxtor 6 Model: Y160P0 Rev: YAR4
Type: Direct-Access-RBC ANSI SCSI revision: 04
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi5, channel 0, id 0, lun 0
scsi6 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048]
Vendor: Maxtor 6 Model: Y160P0 Rev: YAR4
Type: Direct-Access-RBC ANSI SCSI revision: 04
SCSI device sdc: 320173056 512-byte hdwr sectors (163929 MB)
sdc: asking for cache data failed
sdc: assuming drive cache: write through
SCSI device sdc: 320173056 512-byte hdwr sectors (163929 MB)
sdc: asking for cache data failed
sdc: assuming drive cache: write through
sdc: sdc1 sdc2 sdc3
Attached scsi disk sdc at scsi6, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Realtime LSM initialized (all groups, mlock=1)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
lightning ~ #