2023-02-06 06:33:09

by Victor Hassan

Subject: [RESEND] Bluetooth: btrtl: Add support for RTL8852BS

Add the support for RTL8852BS BT controller on UART interface.
The necessary firmware file will be submitted to linux-firmware.

Signed-off-by: Victor Hassan <[email protected]>
---
drivers/bluetooth/btrtl.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 69c3fe649ca7..36c3a23324f8 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -198,6 +198,14 @@ static const struct id_table ic_id_table[] = {
.fw_name = "rtl_bt/rtl8852bu_fw.bin",
.cfg_name = "rtl_bt/rtl8852bu_config" },

+ /* 8852B with UART interface */
+ { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
+ .config_needed = true,
+ .has_rom_version = true,
+ .has_msft_ext = true,
+ .fw_name = "rtl_bt/rtl8852bs_fw.bin",
+ .cfg_name = "rtl_bt/rtl8852bs_config" },
+
/* 8852C */
{ IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
.config_needed = false,
@@ -965,5 +973,7 @@ MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
--
2.29.0

2023-02-06 10:05:30

by Paul Menzel

Subject: Re: [RESEND] Bluetooth: btrtl: Add support for RTL8852BS

Dear Victor,


Thank you for your patch.

Am 06.02.23 um 07:33 schrieb Victor Hassan:
> Add the support for RTL8852BS BT controller on UART interface.
> The necessary firmware file will be submitted to linux-firmware.
>
> Signed-off-by: Victor Hassan <[email protected]>
> ---
> drivers/bluetooth/btrtl.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index 69c3fe649ca7..36c3a23324f8 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -198,6 +198,14 @@ static const struct id_table ic_id_table[] = {
> .fw_name = "rtl_bt/rtl8852bu_fw.bin",
> .cfg_name = "rtl_bt/rtl8852bu_config" },
>
> + /* 8852B with UART interface */
> + { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
> + .config_needed = true,
> + .has_rom_version = true,
> + .has_msft_ext = true,
> + .fw_name = "rtl_bt/rtl8852bs_fw.bin",
> + .cfg_name = "rtl_bt/rtl8852bs_config" },
> +

I’d sort *bs* before *bu*.

> /* 8852C */
> { IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
> .config_needed = false,
> @@ -965,5 +973,7 @@ MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");

Ditto.


Kind regards,

Paul

2023-02-14 06:23:33

by Victor Hassan

Subject: Re: [RESEND] Bluetooth: btrtl: Add support for RTL8852BS

Dear Paul:
Thank you for your advises. I had send PATCH-v2 to fix it. Can you
give me more advises?

On 2023/2/6 18:03, Paul Menzel wrote:
> Dear Victor,
>
>
> Thank you for your patch.
>
> Am 06.02.23 um 07:33 schrieb Victor Hassan:
>> Add the support for RTL8852BS BT controller on UART interface.
>> The necessary firmware file will be submitted to linux-firmware.
>>
>> Signed-off-by: Victor Hassan <[email protected]>
>> ---
>>   drivers/bluetooth/btrtl.c | 10 ++++++++++
>>   1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
>> index 69c3fe649ca7..36c3a23324f8 100644
>> --- a/drivers/bluetooth/btrtl.c
>> +++ b/drivers/bluetooth/btrtl.c
>> @@ -198,6 +198,14 @@ static const struct id_table ic_id_table[] = {
>>         .fw_name  = "rtl_bt/rtl8852bu_fw.bin",
>>         .cfg_name = "rtl_bt/rtl8852bu_config" },
>> +    /* 8852B with UART interface */
>> +    { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
>> +      .config_needed = true,
>> +      .has_rom_version = true,
>> +      .has_msft_ext = true,
>> +      .fw_name  = "rtl_bt/rtl8852bs_fw.bin",
>> +      .cfg_name = "rtl_bt/rtl8852bs_config" },
>> +
>
> I’d sort *bs* before *bu*.
>
>>       /* 8852C */
>>       { IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
>>         .config_needed = false,
>> @@ -965,5 +973,7 @@ MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
>> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
>> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
>
> Ditto.
>
>
> Kind regards,
>
> Paul