Current code assumes that all the irqs registers offsets can be
accessed in all the hw revisions; this is not the case for some
targets that should not access some of the irq registers.
This change adds the support to selectively remove the irqs that
are not supported in some of the hw revisions.
Change-Id: I6052b8237b703a1a9edd53893e04f7bd72223da1
Signed-off-by: Shubhashree Dhar <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 22 +++++++++++++++++-----
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 1 +
4 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 04c8c44..357e15b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -421,6 +421,7 @@ static void sdm845_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
.reg_dma_count = 1,
.dma_cfg = sdm845_regdma,
.perf = sdm845_perf_data,
+ .mdss_irqs[0] = 0x3ff,
};
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index ec76b868..def8a3f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -646,6 +646,7 @@ struct dpu_perf_cfg {
* @dma_formats Supported formats for dma pipe
* @cursor_formats Supported formats for cursor pipe
* @vig_formats Supported formats for vig pipe
+ * @mdss_irqs Bitmap with the irqs supported by the target
*/
struct dpu_mdss_cfg {
u32 hwversion;
@@ -684,6 +685,8 @@ struct dpu_mdss_cfg {
struct dpu_format_extended *dma_formats;
struct dpu_format_extended *cursor_formats;
struct dpu_format_extended *vig_formats;
+
+ DECLARE_BITMAP(mdss_irqs, BITS_PER_BYTE * sizeof(long));
};
struct dpu_mdss_hw_cfg_handler {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index 8bfa7d0..2a3634c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -800,7 +800,8 @@ static void dpu_hw_intr_dispatch_irq(struct dpu_hw_intr *intr,
start_idx = reg_idx * 32;
end_idx = start_idx + 32;
- if (start_idx >= ARRAY_SIZE(dpu_irq_map) ||
+ if (!test_bit(reg_idx, &intr->irq_mask) ||
+ start_idx >= ARRAY_SIZE(dpu_irq_map) ||
end_idx > ARRAY_SIZE(dpu_irq_map))
continue;
@@ -955,8 +956,11 @@ static int dpu_hw_intr_clear_irqs(struct dpu_hw_intr *intr)
if (!intr)
return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++)
- DPU_REG_WRITE(&intr->hw, dpu_intr_set[i].clr_off, 0xffffffff);
+ for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++) {
+ if(test_bit(i, &intr->irq_mask))
+ DPU_REG_WRITE(&intr->hw,
+ dpu_intr_set[i].clr_off, 0xffffffff);
+ }
/* ensure register writes go through */
wmb();
@@ -971,8 +975,11 @@ static int dpu_hw_intr_disable_irqs(struct dpu_hw_intr *intr)
if (!intr)
return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++)
- DPU_REG_WRITE(&intr->hw, dpu_intr_set[i].en_off, 0x00000000);
+ for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++) {
+ if(test_bit(i, &intr->irq_mask))
+ DPU_REG_WRITE(&intr->hw,
+ dpu_intr_set[i].en_off, 0x00000000);
+ }
/* ensure register writes go through */
wmb();
@@ -991,6 +998,10 @@ static void dpu_hw_intr_get_interrupt_statuses(struct dpu_hw_intr *intr)
spin_lock_irqsave(&intr->irq_lock, irq_flags);
for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++) {
+
+ if(!test_bit(i, &intr->irq_mask))
+ continue;
+
/* Read interrupt status */
intr->save_irq_status[i] = DPU_REG_READ(&intr->hw,
dpu_intr_set[i].status_off);
@@ -1115,6 +1126,7 @@ struct dpu_hw_intr *dpu_hw_intr_init(void __iomem *addr,
return ERR_PTR(-ENOMEM);
}
+ intr->irq_mask = m->mdss_irqs[0];
spin_lock_init(&intr->irq_lock);
return intr;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
index 4edcf40..fc9c986 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
@@ -187,6 +187,7 @@ struct dpu_hw_intr {
u32 *save_irq_status;
u32 irq_idx_tbl_size;
spinlock_t irq_lock;
+ unsigned long irq_mask;
};
/**
--
1.9.1
Quoting Shubhashree Dhar (2019-11-13 21:56:16)
> Current code assumes that all the irqs registers offsets can be
> accessed in all the hw revisions; this is not the case for some
> targets that should not access some of the irq registers.
What happens if we read the irq registers that we "should not access"?
Does the system reset? It would be easier to make those registers return
0 when read indicating no interrupt and ignore writes so that everything
keeps working without having to skip registers.
> This change adds the support to selectively remove the irqs that
> are not supported in some of the hw revisions.
>
> Change-Id: I6052b8237b703a1a9edd53893e04f7bd72223da1
Please remove these before sending upstream.
> Signed-off-by: Shubhashree Dhar <[email protected]>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 22 +++++++++++++++++-----
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 1 +
> 4 files changed, 22 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index ec76b868..def8a3f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -646,6 +646,7 @@ struct dpu_perf_cfg {
> * @dma_formats Supported formats for dma pipe
> * @cursor_formats Supported formats for cursor pipe
> * @vig_formats Supported formats for vig pipe
> + * @mdss_irqs Bitmap with the irqs supported by the target
Hmm pretty sure there needs to be a colon so that kernel-doc can match
this but maybe I'm wrong.
> */
> struct dpu_mdss_cfg {
> u32 hwversion;
On 2019-11-14 22:59, Stephen Boyd wrote:
> Quoting Shubhashree Dhar (2019-11-13 21:56:16)
>> Current code assumes that all the irqs registers offsets can be
>> accessed in all the hw revisions; this is not the case for some
>> targets that should not access some of the irq registers.
>
> What happens if we read the irq registers that we "should not access"?
> Does the system reset? It would be easier to make those registers
> return
> 0 when read indicating no interrupt and ignore writes so that
> everything
> keeps working without having to skip registers.
>
In some of the hw revisions, the whole hw block is absent and trying to
access those
registers causes system panic(bus noc error).
>> This change adds the support to selectively remove the irqs that
>> are not supported in some of the hw revisions.
>>
>> Change-Id: I6052b8237b703a1a9edd53893e04f7bd72223da1
>
> Please remove these before sending upstream.
>
>> Signed-off-by: Shubhashree Dhar <[email protected]>
>> ---
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 22
>> +++++++++++++++++-----
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 1 +
>> 4 files changed, 22 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index ec76b868..def8a3f 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -646,6 +646,7 @@ struct dpu_perf_cfg {
>> * @dma_formats Supported formats for dma pipe
>> * @cursor_formats Supported formats for cursor pipe
>> * @vig_formats Supported formats for vig pipe
>> + * @mdss_irqs Bitmap with the irqs supported by the target
>
> Hmm pretty sure there needs to be a colon so that kernel-doc can match
> this but maybe I'm wrong.
>
>> */
>> struct dpu_mdss_cfg {
>> u32 hwversion;