2021-05-07 01:35:13

by Chris Packham

Subject: [PATCH v2 2/3] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).

Signed-off-by: Chris Packham <[email protected]>
---
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 872e4485dc3f..ddc018d42252 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -371,7 +371,23 @@ sdhc@114000 {
};

/include/ "qoriq-i2c-0.dtsi"
+ i2c@118000 {
+ fsl,i2c-erratum-a004447;
+ };
+
+ i2c@118100 {
+ fsl,i2c-erratum-a004447;
+ };
+
/include/ "qoriq-i2c-1.dtsi"
+ i2c@119000 {
+ fsl,i2c-erratum-a004447;
+ };
+
+ i2c@119100 {
+ fsl,i2c-erratum-a004447;
+ };
+
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
--
2.31.1

2021-05-07 11:28:05

by Joakim Tjernlund

Subject: Re: [PATCH v2 2/3] powerpc/fsl: set fsl, i2c-erratum-a004447 flag for P2041 i2c controllers

On Fri, 2021-05-07 at 12:40 +1200, Chris Packham wrote:
> The i2c controllers on the P2040/P2041 have an erratum where the
> documented scheme for i2c bus recovery will not work (A-004447). A
> different mechanism is needed which is documented in the P2040 Chip
> Errata Rev Q (latest available at the time of writing).

From what I can tell this Erratum also applies to P1010

Jocke