Pointers to the internal clock elements of the PWM are useless
after probe. There is no need to carry this around in the device
data.
Rework the clock registration to let devres deal with it
Signed-off-by: Jerome Brunet <[email protected]>
---
drivers/pwm/pwm-meson.c | 73 ++++++++++++++++++++++-------------------
1 file changed, 40 insertions(+), 33 deletions(-)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index a02fdbc61256..fe61335d87d0 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -85,14 +85,17 @@ static struct meson_pwm_channel_data {
}
};
+struct meson8b_pwm_clocks {
+ struct clk_divider div;
+ struct clk_gate gate;
+ struct clk_mux mux;
+};
+
struct meson_pwm_channel {
unsigned long rate;
unsigned int hi;
unsigned int lo;
- struct clk_mux mux;
- struct clk_divider div;
- struct clk_gate gate;
struct clk *clk;
};
@@ -419,9 +422,14 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
for (i = 0; i < chip->npwm; i++) {
struct meson_pwm_channel *channel = &meson->channels[i];
- struct clk_parent_data div_parent = {}, gate_parent = {};
+ struct clk_parent_data pdata = {};
+ struct meson8b_pwm_clocks *clks;
struct clk_init_data init = {};
+ clks = devm_kzalloc(dev, sizeof(*clks), GFP_KERNEL);
+ if (!clks)
+ return -ENOMEM;
+
snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
init.name = name;
@@ -430,16 +438,15 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
init.parent_data = mux_parent_data;
init.num_parents = MESON_NUM_MUX_PARENTS;
- channel->mux.reg = meson->base + REG_MISC_AB;
- channel->mux.shift =
- meson_pwm_per_channel_data[i].clk_sel_shift;
- channel->mux.mask = MISC_CLK_SEL_MASK;
- channel->mux.flags = 0;
- channel->mux.lock = &meson->lock;
- channel->mux.table = NULL;
- channel->mux.hw.init = &init;
+ clks->mux.reg = meson->base + REG_MISC_AB;
+ clks->mux.shift = meson_pwm_per_channel_data[i].clk_sel_shift;
+ clks->mux.mask = MISC_CLK_SEL_MASK;
+ clks->mux.flags = 0;
+ clks->mux.lock = &meson->lock;
+ clks->mux.table = NULL;
+ clks->mux.hw.init = &init;
- err = devm_clk_hw_register(dev, &channel->mux.hw);
+ err = devm_clk_hw_register(dev, &clks->mux.hw);
if (err)
return dev_err_probe(dev, err,
"failed to register %s\n", name);
@@ -449,19 +456,19 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
init.name = name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
- div_parent.index = -1;
- div_parent.hw = &channel->mux.hw;
- init.parent_data = &div_parent;
+ pdata.index = -1;
+ pdata.hw = &clks->mux.hw;
+ init.parent_data = &pdata;
init.num_parents = 1;
- channel->div.reg = meson->base + REG_MISC_AB;
- channel->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
- channel->div.width = MISC_CLK_DIV_WIDTH;
- channel->div.hw.init = &init;
- channel->div.flags = 0;
- channel->div.lock = &meson->lock;
+ clks->div.reg = meson->base + REG_MISC_AB;
+ clks->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
+ clks->div.width = MISC_CLK_DIV_WIDTH;
+ clks->div.hw.init = &init;
+ clks->div.flags = 0;
+ clks->div.lock = &meson->lock;
- err = devm_clk_hw_register(dev, &channel->div.hw);
+ err = devm_clk_hw_register(dev, &clks->div.hw);
if (err)
return dev_err_probe(dev, err,
"failed to register %s\n", name);
@@ -471,22 +478,22 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
init.name = name;
init.ops = &clk_gate_ops;
init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
- gate_parent.index = -1;
- gate_parent.hw = &channel->div.hw;
- init.parent_data = &gate_parent;
+ pdata.index = -1;
+ pdata.hw = &clks->div.hw;
+ init.parent_data = &pdata;
init.num_parents = 1;
- channel->gate.reg = meson->base + REG_MISC_AB;
- channel->gate.bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
- channel->gate.hw.init = &init;
- channel->gate.flags = 0;
- channel->gate.lock = &meson->lock;
+ clks->gate.reg = meson->base + REG_MISC_AB;
+ clks->gate.bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
+ clks->gate.hw.init = &init;
+ clks->gate.flags = 0;
+ clks->gate.lock = &meson->lock;
- err = devm_clk_hw_register(dev, &channel->gate.hw);
+ err = devm_clk_hw_register(dev, &clks->gate.hw);
if (err)
return dev_err_probe(dev, err, "failed to register %s\n", name);
- channel->clk = devm_clk_hw_get_clk(dev, &channel->gate.hw, NULL);
+ channel->clk = devm_clk_hw_get_clk(dev, &clks->gate.hw, NULL);
if (IS_ERR(channel->clk))
return dev_err_probe(dev, PTR_ERR(channel->clk),
"failed to register %s\n", name);
--
2.43.0
Hello Jerome,
On Wed, Feb 21, 2024 at 04:11:50PM +0100, Jerome Brunet wrote:
> Pointers to the internal clock elements of the PWM are useless
> after probe. There is no need to carry this around in the device
> data.
>
> Rework the clock registration to let devres deal with it
>
> Signed-off-by: Jerome Brunet <[email protected]>
> ---
> drivers/pwm/pwm-meson.c | 73 ++++++++++++++++++++++-------------------
> 1 file changed, 40 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> index a02fdbc61256..fe61335d87d0 100644
> --- a/drivers/pwm/pwm-meson.c
> +++ b/drivers/pwm/pwm-meson.c
> @@ -85,14 +85,17 @@ static struct meson_pwm_channel_data {
> }
> };
>
> +struct meson8b_pwm_clocks {
> + struct clk_divider div;
> + struct clk_gate gate;
> + struct clk_mux mux;
> +};
> +
> struct meson_pwm_channel {
> unsigned long rate;
> unsigned int hi;
> unsigned int lo;
>
> - struct clk_mux mux;
> - struct clk_divider div;
> - struct clk_gate gate;
> struct clk *clk;
> };
I don't think there is a valuable benefit here. Yes, the three
structures are not used explicitly in the driver afterwards, but the
memory has to stay around to call clk_hw_unregister() when the device is
unregistered. So to hide these from struct meson_pwm_channel, we're not
saving any memory, but add the overhead of one additional devm_kzalloc
per PWM channel. For me the cost-benefit calculation is bad here.
> @@ -419,9 +422,14 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
>
> for (i = 0; i < chip->npwm; i++) {
> struct meson_pwm_channel *channel = &meson->channels[i];
> - struct clk_parent_data div_parent = {}, gate_parent = {};
> + struct clk_parent_data pdata = {};
> + struct meson8b_pwm_clocks *clks;
> struct clk_init_data init = {};
>
> + clks = devm_kzalloc(dev, sizeof(*clks), GFP_KERNEL);
> + if (!clks)
> + return -ENOMEM;
> +
> snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
>
> init.name = name;
> @@ -430,16 +438,15 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
> init.parent_data = mux_parent_data;
> init.num_parents = MESON_NUM_MUX_PARENTS;
>
> - channel->mux.reg = meson->base + REG_MISC_AB;
> - channel->mux.shift =
> - meson_pwm_per_channel_data[i].clk_sel_shift;
> - channel->mux.mask = MISC_CLK_SEL_MASK;
> - channel->mux.flags = 0;
> - channel->mux.lock = &meson->lock;
> - channel->mux.table = NULL;
> - channel->mux.hw.init = &init;
> + clks->mux.reg = meson->base + REG_MISC_AB;
> + clks->mux.shift = meson_pwm_per_channel_data[i].clk_sel_shift;
> + clks->mux.mask = MISC_CLK_SEL_MASK;
> + clks->mux.flags = 0;
> + clks->mux.lock = &meson->lock;
> + clks->mux.table = NULL;
> + clks->mux.hw.init = &init;
>
> - err = devm_clk_hw_register(dev, &channel->mux.hw);
> + err = devm_clk_hw_register(dev, &clks->mux.hw);
> if (err)
> return dev_err_probe(dev, err,
> "failed to register %s\n", name);
> @@ -449,19 +456,19 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
> init.name = name;
> init.ops = &clk_divider_ops;
> init.flags = CLK_SET_RATE_PARENT;
> - div_parent.index = -1;
> - div_parent.hw = &channel->mux.hw;
> - init.parent_data = &div_parent;
> + pdata.index = -1;
> + pdata.hw = &clks->mux.hw;
> + init.parent_data = &pdata;
Is it safe to use a single pdata instead of separate div_parent +
gate_parent below as before? That should be a separate change then (or
at least motivated in the commit log.)
> init.num_parents = 1;
>
> - channel->div.reg = meson->base + REG_MISC_AB;
> - channel->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
> - channel->div.width = MISC_CLK_DIV_WIDTH;
> - channel->div.hw.init = &init;
> - channel->div.flags = 0;
> - channel->div.lock = &meson->lock;
> + clks->div.reg = meson->base + REG_MISC_AB;
> + clks->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
> + clks->div.width = MISC_CLK_DIV_WIDTH;
> + clks->div.hw.init = &init;
> + clks->div.flags = 0;
> + clks->div.lock = &meson->lock;
>
> - err = devm_clk_hw_register(dev, &channel->div.hw);
> + err = devm_clk_hw_register(dev, &clks->div.hw);
> if (err)
> return dev_err_probe(dev, err,
> "failed to register %s\n", name);
> @@ -471,22 +478,22 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
> init.name = name;
> init.ops = &clk_gate_ops;
> init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
> - gate_parent.index = -1;
> - gate_parent.hw = &channel->div.hw;
> - init.parent_data = &gate_parent;
> + pdata.index = -1;
> + pdata.hw = &clks->div.hw;
> + init.parent_data = &pdata;
> init.num_parents = 1;
>
> [...]
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |