This patch sets ramp_delay for bucks to the max value given by the
datasheet.
Signed-off-by: Christoph Fritz <[email protected]>
Reviewed-by: Adrien Grassein <[email protected]>
---
drivers/regulator/pf8x00-regulator.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index 1e5582d73405..edf5c88bf43e 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -351,6 +351,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.type = REGULATOR_VOLTAGE, \
.id = PF8X00_BUCK ## _id, \
.owner = THIS_MODULE, \
+ .ramp_delay = 19000, \
.linear_ranges = pf8x00_sw1_to_6_voltages, \
.n_linear_ranges = \
ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \
@@ -381,6 +382,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.type = REGULATOR_VOLTAGE, \
.id = PF8X00_BUCK7, \
.owner = THIS_MODULE, \
+ .ramp_delay = 19000, \
.volt_table = voltages, \
.vsel_reg = (base) + SW_RUN_VOLT, \
.vsel_mask = 0xff, \
--
2.29.2