aka: via-velocity-dont-oops-on-mtu-change-2.patch
From: Stephen Hemminger <[email protected]>
Date: Wed, 28 Nov 2007 22:20:16 +0000 (-0800)
Subject: via-velocity: don't oops on MTU change (resend)
Patch-mainline: v2.6.24-rc4
References: 341537
via-velocity: don't oops on MTU change (resend)
mainline: 48f6b053613b62fed7a2fe3255e5568260a8d615
The VIA veloicty driver needs the following to allow changing MTU when down.
The buffer size needs to be computed when device is brought up, not when
device is initialized. This also fixes a bug where the buffer size was
computed differently on change_mtu versus initial setting.
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
Acked-by: Jeff Mahoney <[email protected]>
CC: Oliver Pinter <[email protected]>
---
drivers/net/via-velocity.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
--- a/drivers/net/via-velocity.c 2008-01-03 15:18:50.000000000 -0500
+++ b/drivers/net/via-velocity.c 2008-01-03 15:22:18.000000000 -0500
@@ -1075,6 +1075,9 @@ static int velocity_init_rd_ring(struct
int ret = -ENOMEM;
unsigned int rsize = sizeof(struct velocity_rd_info) *
vptr->options.numrx;
+ int mtu = vptr->dev->mtu;
+
+ vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
if(vptr->rd_info == NULL)
@@ -1733,8 +1736,6 @@ static int velocity_open(struct net_devi
struct velocity_info *vptr = netdev_priv(dev);
int ret;
- vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32);
-
ret = velocity_init_rings(vptr);
if (ret < 0)
goto out;
@@ -1813,12 +1814,6 @@ static int velocity_change_mtu(struct ne
velocity_free_rd_ring(vptr);
dev->mtu = new_mtu;
- if (new_mtu > 8192)
- vptr->rx_buf_sz = 9 * 1024;
- else if (new_mtu > 4096)
- vptr->rx_buf_sz = 8192;
- else
- vptr->rx_buf_sz = 4 * 1024;
ret = velocity_init_rd_ring(vptr);
if (ret < 0)
--
Thanks,
Oliver