This series adds support for the MeCool (Videostrong) KII Pro (GXL)
and KIII Pro (GXM) Android STB devices. These are quite popular due
to the embedded multi-standard tuner card (which is sadly not-yet
supported in the kernel). Both devices closely follow the Amlogic
reference designs with keys/buttons/LED details taken from known-
working vendor kernel device-trees.
Testing was made by Drazen Spio via the LibreELEC forums [0] as I
don't own either device. Since dts files were added to LibreELEC
nightly test images I've seen the number of active installs grow
without reported issues.
[0] https://forum.libreelec.tv/thread/23590-nightbuild-on-mecool-kiii-pro/
Christian Hewitt (3):
dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings
arm64: dts: meson: add initial device-tree for MeCool KII Pro
arm64: dts: meson: add initial device-tree for MeCool KIII Pro
.../devicetree/bindings/arm/amlogic.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../meson-gxl-s905d-mecool-kii-pro.dts | 86 +++++++++++++
.../dts/amlogic/meson-gxm-mecool-kiii-pro.dts | 113 ++++++++++++++++++
4 files changed, 203 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
--
2.17.1
MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference
board with an S905D chip and the following specs:
- 2GB DDR3 RAM
- 16GB eMMC
- 10/100 Base-T Ethernet
- BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
- DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner)
- HDMI 2.0a video
- S/PDIF optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x micro SD card slot
Tested-by: Drazen Spio <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../meson-gxl-s905d-mecool-kii-pro.dts | 86 +++++++++++++++++++
2 files changed, 87 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index aebd49c88719..f8f515c93055 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
new file mode 100644
index 000000000000..5ab5d3aa0646
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "videostrong,gxl-kii-pro", "amlogic,s905d", "amlogic,meson-gxl";
+ model = "MeCool KII Pro";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-function {
+ label = "Update";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+};
+
+ðmac {
+ phy-mode = "rmii";
+ phy-handle = <&internal_phy>;
+};
+
+&ir {
+ linux,rc-map-name = "rc-mecool-kii-pro";
+};
+
+&sd_emmc_a {
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
+};
--
2.17.1
MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference
board with an S912 chip and the following specs:
- 3GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
- DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner)
- HDMI 2.0a video
- S/PDIF optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Tested-by: Drazen Spio <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-gxm-mecool-kiii-pro.dts | 113 ++++++++++++++++++
2 files changed, 114 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index f8f515c93055..a58ccecfcb55 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
new file mode 100644
index 000000000000..0651756d7fb5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "videostrong,gxm-kiii-pro", "amlogic,s912", "amlogic,meson-gxm";
+ model = "MeCool KIII Pro";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0xC0000000>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-function {
+ label = "Update";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+};
+
+ðmac {
+ pinctrl-0 = <ð_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&external_phy>;
+
+ amlogic,tx-delay-ns = <2>;
+
+ phy-mode = "rgmii";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_15 */
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ir {
+ linux,rc-map-name = "rc-mecool-kiii-pro";
+};
+
+&sd_emmc_a {
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
+};
--
2.17.1
On 29/03/2021 17:47, Christian Hewitt wrote:
> MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference
> board with an S905D chip and the following specs:
>
> - 2GB DDR3 RAM
> - 16GB eMMC
> - 10/100 Base-T Ethernet
> - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
> - DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner)
> - HDMI 2.0a video
> - S/PDIF optical output
> - CVBS/Analogue output
> - 4x USB 2.0 ports
> - IR receiver
> - 1x Power button (with integrated blue LED)
> - 1x micro SD card slot
>
> Tested-by: Drazen Spio <[email protected]>
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../meson-gxl-s905d-mecool-kii-pro.dts | 86 +++++++++++++++++++
> 2 files changed, 87 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index aebd49c88719..f8f515c93055 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
> new file mode 100644
> index 000000000000..5ab5d3aa0646
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/*
> + * Author: Christian Hewitt <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxl-s905d.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + compatible = "videostrong,gxl-kii-pro", "amlogic,s905d", "amlogic,meson-gxl";
> + model = "MeCool KII Pro";
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 0>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1710000>;
> +
> + button-function {
> + label = "Update";
> + linux,code = <KEY_VENDOR>;
> + press-threshold-microvolt = <10000>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <100>;
> +
> + button@0 {
> + label = "power";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + blue {
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_POWER;
> + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + panic-indicator;
> + };
> + };
> +};
> +
> +ðmac {
> + phy-mode = "rmii";
> + phy-handle = <&internal_phy>;
> +};
> +
> +&ir {
> + linux,rc-map-name = "rc-mecool-kii-pro";
> +};
> +
> +&sd_emmc_a {
> + brcmf: wifi@1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + max-speed = <2000000>;
> + clocks = <&wifi32k>;
> + clock-names = "lpo";
> + };
> +};
>
Reviewed-by: Neil Armstrong <[email protected]>
On 29/03/2021 17:47, Christian Hewitt wrote:
> MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference
> board with an S912 chip and the following specs:
>
> - 3GB DDR3 RAM
> - 16GB eMMC
> - 10/100/1000 Base-T Ethernet
> - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
> - DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner)
> - HDMI 2.0a video
> - S/PDIF optical output
> - CVBS/Analogue output
> - 4x USB 2.0 ports
> - IR receiver
> - 1x Power button (with integrated blue LED)
> - 1x Update/Reset button (underside)
> - 1x micro SD card slot
>
> Tested-by: Drazen Spio <[email protected]>
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../dts/amlogic/meson-gxm-mecool-kiii-pro.dts | 113 ++++++++++++++++++
> 2 files changed, 114 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index f8f515c93055..a58ccecfcb55 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
> new file mode 100644
> index 000000000000..0651756d7fb5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
> @@ -0,0 +1,113 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/*
> + * Author: Christian Hewitt <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxm.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + compatible = "videostrong,gxm-kiii-pro", "amlogic,s912", "amlogic,meson-gxm";
> + model = "MeCool KIII Pro";
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0xC0000000>;
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 0>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1710000>;
> +
> + button-function {
> + label = "Update";
> + linux,code = <KEY_VENDOR>;
> + press-threshold-microvolt = <10000>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <100>;
> +
> + button@0 {
> + label = "power";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + blue {
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_POWER;
> + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + panic-indicator;
> + };
> + };
> +};
> +
> +ðmac {
> + pinctrl-0 = <ð_pins>;
> + pinctrl-names = "default";
> +
> + phy-handle = <&external_phy>;
> +
> + amlogic,tx-delay-ns = <2>;
> +
> + phy-mode = "rgmii";
> +};
> +
> +&external_mdio {
> + external_phy: ethernet-phy@0 {
> + /* Realtek RTL8211F (0x001cc916) */
> + reg = <0>;
> + max-speed = <1000>;
> +
> + reset-assert-us = <10000>;
> + reset-deassert-us = <80000>;
> + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
> +
> + interrupt-parent = <&gpio_intc>;
> + /* MAC_INTR on GPIOZ_15 */
> + interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&ir {
> + linux,rc-map-name = "rc-mecool-kiii-pro";
> +};
> +
> +&sd_emmc_a {
> + brcmf: wifi@1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + max-speed = <2000000>;
> + clocks = <&wifi32k>;
> + clock-names = "lpo";
> + };
> +};
>
Reviewed-by: Neil Armstrong <[email protected]>
Christian Hewitt <[email protected]> writes:
> This series adds support for the MeCool (Videostrong) KII Pro (GXL)
> and KIII Pro (GXM) Android STB devices. These are quite popular due
> to the embedded multi-standard tuner card (which is sadly not-yet
> supported in the kernel). Both devices closely follow the Amlogic
> reference designs with keys/buttons/LED details taken from known-
> working vendor kernel device-trees.
>
> Testing was made by Drazen Spio via the LibreELEC forums [0] as I
> don't own either device. Since dts files were added to LibreELEC
> nightly test images I've seen the number of active installs grow
> without reported issues.
Great, thanks for the new board.
Do you mind rebasing this on top of my v5.13/dt64 branch, since it has
some conflicts with the Minix NEO U9-H series.
Thanks,
Kevin
On Mon, 29 Mar 2021 15:47:50 +0000, Christian Hewitt wrote:
> This series adds support for the MeCool (Videostrong) KII Pro (GXL)
> and KIII Pro (GXM) Android STB devices. These are quite popular due
> to the embedded multi-standard tuner card (which is sadly not-yet
> supported in the kernel). Both devices closely follow the Amlogic
> reference designs with keys/buttons/LED details taken from known-
> working vendor kernel device-trees.
>
> [...]
Applied, thanks!
[1/3] dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings
commit: 0bbfea7c0469cbe0914c1800b70f607ed7638870
[2/3] arm64: dts: meson: add initial device-tree for MeCool KII Pro
commit: d5454e7ce24a28bd22beb2fc02f1571b5748dfbb
[3/3] arm64: dts: meson: add initial device-tree for MeCool KIII Pro
commit: 727d93ed3ba67307a82c3ac5ebc7e335265e8b9e
Best regards,
--
Kevin Hilman <[email protected]>