This is the start of the stable review cycle for the 5.16.16 release.
There are 28 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 19 Mar 2022 12:45:16 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.16-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.16.16-rc1
Ivan Vecera <[email protected]>
ice: Fix race condition during interface enslave
Chengming Zhou <[email protected]>
kselftest/vm: fix tests build with old libc
Christophe JAILLET <[email protected]>
bnx2: Fix an error message
Niels Dossche <[email protected]>
sfc: extend the locking on mcdi->seqno
Eric Dumazet <[email protected]>
tcp: make tcp_read_sock() more robust
Sreeramya Soratkal <[email protected]>
nl80211: Update bss channel on channel switch for P2P_CLIENT
Manasi Navare <[email protected]>
drm/vrr: Set VRR capable prop only if it is attached to connector
Golan Ben Ami <[email protected]>
iwlwifi: don't advertise TWT support
Hans de Goede <[email protected]>
Input: goodix - workaround Cherry Trail devices with a bogus ACPI Interrupt() resource
Hans de Goede <[email protected]>
Input: goodix - use the new soc_intel_is_byt() helper
Florian Westphal <[email protected]>
netfilter: egress: silence egress hook lockdep splats
Jia-Ju Bai <[email protected]>
atm: firestream: check the return value of ioremap() in fs_init()
Lad Prabhakar <[email protected]>
can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready
Luiz Augusto von Dentz <[email protected]>
Bluetooth: hci_core: Fix leaking sent_cmd skb
Julian Braha <[email protected]>
ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE
Alexander Lobakin <[email protected]>
MIPS: smp: fill in sibling and core maps earlier
Johannes Berg <[email protected]>
mac80211: refuse aggregations sessions before authorized
Corentin Labbe <[email protected]>
ARM: dts: rockchip: fix a typo on rk3288 crypto-controller
Sascha Hauer <[email protected]>
ARM: dts: rockchip: reorder rk322x hmdi clocks
Dinh Nguyen <[email protected]>
arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"
Sascha Hauer <[email protected]>
arm64: dts: rockchip: reorder rk3399 hdmi clocks
Krzysztof Kozlowski <[email protected]>
arm64: dts: rockchip: align pl330 node name with dtschema
Jakob Unterwurzacher <[email protected]>
arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity
Yan Yan <[email protected]>
xfrm: Fix xfrm migrate issues when address family changes
Yan Yan <[email protected]>
xfrm: Check if_id in xfrm_migrate
Quentin Schulz <[email protected]>
arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode
Frank Wunderlich <[email protected]>
arm64: dts: rockchip: fix dma-controller node names on rk356x
Kai Lueke <[email protected]>
Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
-------------
Diffstat:
Makefile | 4 +--
arch/arm/boot/dts/rk322x.dtsi | 4 +--
arch/arm/boot/dts/rk3288.dtsi | 2 +-
arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 4 +--
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
.../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 20 +++++++++++++
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 ++--
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 4 +--
arch/mips/kernel/smp.c | 6 ++--
drivers/atm/firestream.c | 2 ++
drivers/gpu/drm/drm_connector.c | 3 ++
drivers/input/touchscreen/goodix.c | 34 +++++++++++-----------
drivers/net/can/rcar/rcar_canfd.c | 6 ++--
drivers/net/ethernet/broadcom/bnx2.c | 2 +-
drivers/net/ethernet/intel/ice/ice.h | 11 ++++++-
drivers/net/ethernet/intel/ice/ice_main.c | 12 +++++++-
drivers/net/ethernet/sfc/mcdi.c | 2 +-
drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 3 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 1 -
include/linux/netfilter_netdev.h | 4 +++
include/net/xfrm.h | 5 ++--
lib/Kconfig | 1 -
net/bluetooth/hci_core.c | 1 +
net/ipv4/tcp.c | 10 ++++---
net/key/af_key.c | 2 +-
net/mac80211/agg-tx.c | 10 ++++++-
net/wireless/nl80211.c | 3 +-
net/xfrm/xfrm_policy.c | 14 +++++----
net/xfrm/xfrm_state.c | 15 +++++++---
net/xfrm/xfrm_user.c | 27 +++++------------
tools/testing/selftests/vm/userfaultfd.c | 1 +
33 files changed, 141 insertions(+), 83 deletions(-)
From: Florian Westphal <[email protected]>
[ Upstream commit 17a8f31bba7bac8cce4bd12bab50697da96e7710 ]
Netfilter assumes its called with rcu_read_lock held, but in egress
hook case it may be called with BH readlock.
This triggers lockdep splat.
In order to avoid to change all rcu_dereference() to
rcu_dereference_check(..., rcu_read_lock_bh_held()), wrap nf_hook_slow
with read lock/unlock pair.
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/netfilter_netdev.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/linux/netfilter_netdev.h b/include/linux/netfilter_netdev.h
index b4dd96e4dc8d..e6487a691136 100644
--- a/include/linux/netfilter_netdev.h
+++ b/include/linux/netfilter_netdev.h
@@ -101,7 +101,11 @@ static inline struct sk_buff *nf_hook_egress(struct sk_buff *skb, int *rc,
nf_hook_state_init(&state, NF_NETDEV_EGRESS,
NFPROTO_NETDEV, dev, NULL, NULL,
dev_net(dev), NULL);
+
+ /* nf assumes rcu_read_lock, not just read_lock_bh */
+ rcu_read_lock();
ret = nf_hook_slow(skb, &state, e, 0);
+ rcu_read_unlock();
if (ret == 1) {
return skb;
--
2.34.1
From: Eric Dumazet <[email protected]>
[ Upstream commit e3d5ea2c011ecb16fb94c56a659364e6b30fac94 ]
If recv_actor() returns an incorrect value, tcp_read_sock()
might loop forever.
Instead, issue a one time warning and make sure to make progress.
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jakub Sitnicki <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 28abb0bb1c51..38f936785179 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1653,11 +1653,13 @@ int tcp_read_sock(struct sock *sk, read_descriptor_t *desc,
if (!copied)
copied = used;
break;
- } else if (used <= len) {
- seq += used;
- copied += used;
- offset += used;
}
+ if (WARN_ON_ONCE(used > len))
+ used = len;
+ seq += used;
+ copied += used;
+ offset += used;
+
/* If recv_actor drops the lock (e.g. TCP splice
* receive) the skb pointer might be invalid when
* getting here: tcp_collapse might have deleted it
--
2.34.1
From: Manasi Navare <[email protected]>
[ Upstream commit 62929726ef0ec72cbbe9440c5d125d4278b99894 ]
VRR capable property is not attached by default to the connector
It is attached only if VRR is supported.
So if the driver tries to call drm core set prop function without
it being attached that causes NULL dereference.
Cc: Jani Nikula <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: [email protected]
Signed-off-by: Manasi Navare <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_connector.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 52e20c68813b..6ae26e7d3dec 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -2275,6 +2275,9 @@ EXPORT_SYMBOL(drm_connector_atomic_hdr_metadata_equal);
void drm_connector_set_vrr_capable_property(
struct drm_connector *connector, bool capable)
{
+ if (!connector->vrr_capable_property)
+ return;
+
drm_object_property_set_value(&connector->base,
connector->vrr_capable_property,
capable);
--
2.34.1
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit dd3b1dc3dd050f1f47cd13e300732852414270f8 ]
sent_cmd memory is not freed before freeing hci_dev causing it to leak
it contents.
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 6c00ce302f09..1c8fb27b155a 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3969,6 +3969,7 @@ void hci_release_dev(struct hci_dev *hdev)
hci_dev_unlock(hdev);
ida_simple_remove(&hci_index_ida, hdev->id);
+ kfree_skb(hdev->sent_cmd);
kfree(hdev);
}
EXPORT_SYMBOL(hci_release_dev);
--
2.34.1
From: Frank Wunderlich <[email protected]>
[ Upstream commit 2ddd96aadbd0412040ef49eda94549c32de6c92c ]
DMA-Cotrollers defined in rk356x.dtsi do not match the pattern in bindings.
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml:
dmac@fe530000: $nodename:0: 'dmac@fe530000' does not match '^dma-controller(@.*)?$'
From schema: Documentation/devicetree/bindings/dma/arm,pl330.yaml
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml:
dmac@fe550000: $nodename:0: 'dmac@fe550000' does not match '^dma-controller(@.*)?$'
From schema: Documentation/devicetree/bindings/dma/arm,pl330.yaml
This Patch fixes it.
Signed-off-by: Frank Wunderlich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 46d9552f6028..688e3585525a 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -647,7 +647,7 @@
status = "disabled";
};
- dmac0: dmac@fe530000 {
+ dmac0: dma-controller@fe530000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xfe530000 0x0 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
@@ -658,7 +658,7 @@
#dma-cells = <1>;
};
- dmac1: dmac@fe550000 {
+ dmac1: dma-controller@fe550000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xfe550000 0x0 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit d176708ffc20332d1c730098d2b111e0b77ece82 ]
Use the new soc_intel_is_byt() helper from linux/platform_data/x86/soc.h.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/goodix.c | 18 ++----------------
1 file changed, 2 insertions(+), 16 deletions(-)
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index aaa3c455e01e..e053aadea3c9 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/platform_data/x86/soc.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/of.h>
@@ -686,21 +687,6 @@ static int goodix_reset(struct goodix_ts_data *ts)
}
#ifdef ACPI_GPIO_SUPPORT
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-
-static const struct x86_cpu_id baytrail_cpu_ids[] = {
- { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, X86_FEATURE_ANY, },
- {}
-};
-
-static inline bool is_byt(void)
-{
- const struct x86_cpu_id *id = x86_match_cpu(baytrail_cpu_ids);
-
- return !!id;
-}
-
static const struct acpi_gpio_params first_gpio = { 0, 0, false };
static const struct acpi_gpio_params second_gpio = { 1, 0, false };
@@ -784,7 +770,7 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n");
ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD;
gpio_mapping = acpi_goodix_reset_only_gpios;
- } else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) {
+ } else if (soc_intel_is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) {
dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n");
ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
gpio_mapping = acpi_goodix_int_last_gpios;
--
2.34.1
From: Sascha Hauer <[email protected]>
[ Upstream commit 2e8a8b5955a000cc655f7e368670518cbb77fe58 ]
The binding specifies the clock order to "cec", "grf", "vpll". Reorder
the clocks accordingly.
Signed-off-by: Sascha Hauer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d3cdf6f42a30..080457a68e3c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1881,10 +1881,10 @@
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_HDMI_CTRL>,
<&cru SCLK_HDMI_SFR>,
- <&cru PLL_VPLL>,
+ <&cru SCLK_HDMI_CEC>,
<&cru PCLK_VIO_GRF>,
- <&cru SCLK_HDMI_CEC>;
- clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+ <&cru PLL_VPLL>;
+ clock-names = "iahb", "isfr", "cec", "grf", "vpll";
power-domains = <&power RK3399_PD_HDCP>;
reg-io-width = <4>;
rockchip,grf = <&grf>;
--
2.34.1
From: Quentin Schulz <[email protected]>
[ Upstream commit ed2c66a95c0c5669880aa93d0d34c6e9694b4cbd ]
The micro USB3.0 port available on the Haikou evaluation kit for Puma
RK3399-Q7 SoM supports dual-role model (aka drd or OTG) but its support
was broken until now because of missing logic around the ID pin.
This adds proper support for USB OTG on Puma Haikou by "connecting" the
GPIO used for USB ID to the USB3 controller device.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 14 ++++++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 292bb7e80cf3..3ae5d727e367 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -232,6 +232,7 @@
&usbdrd_dwc3_0 {
dr_mode = "otg";
+ extcon = <&extcon_usb3>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index fb67db4619ea..002ece51c3ba 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -25,6 +25,13 @@
};
};
+ extcon_usb3: extcon-usb3 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_id>;
+ };
+
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -422,6 +429,13 @@
<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ usb3 {
+ usb3_id: usb3-id {
+ rockchip,pins =
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&sdhci {
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit f2703def339c793674010cc9f01bfe4980231808 ]
After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle),
2-core 2-thread-per-core interAptiv (CPS-driven) started emitting
the following:
[ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.048183] ------------[ cut here ]------------
[ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240
[ 0.048220] Modules linked in:
[ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f
[ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1
[ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000
[ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000
[ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34
[ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933
[ 0.048389] ...
[ 0.048396] Call Trace:
[ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140
[ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80
[ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4
[ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c
[ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240
[ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80
[ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140
[ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140
[ 0.048523] [<8106593c>] start_secondary+0xbc/0x280
[ 0.048539]
[ 0.048543] ---[ end trace 0000000000000000 ]---
[ 0.048636] Synchronize counters for CPU 1: done.
...for each but CPU 0/boot.
Basic debug printks right before the mentioned line say:
[ 0.048170] CPU: 1, smt_mask:
So smt_mask, which is sibling mask obviously, is empty when entering
the function.
This is critical, as sched_core_cpu_starting() calculates
core-scheduling parameters only once per CPU start, and it's crucial
to have all the parameters filled in at that moment (at least it
uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on
MIPS).
A bit of debugging led me to that set_cpu_sibling_map() performing
the actual map calculation, was being invocated after
notify_cpu_start(), and exactly the latter function starts CPU HP
callback round (sched_core_cpu_starting() is basically a CPU HP
callback).
While the flow is same on ARM64 (maps after the notifier, although
before calling set_cpu_online()), x86 started calculating sibling
maps earlier than starting the CPU HP callbacks in Linux 4.14 (see
[0] for the reference). Neither me nor my brief tests couldn't find
any potential caveats in calculating the maps right after performing
delay calibration, but the WARN splat is now gone.
The very same debug prints now yield exactly what I expected from
them:
[ 0.048433] CPU: 1, smt_mask: 0-1
[0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/kernel/smp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index d542fb7af3ba..1986d1309410 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -351,6 +351,9 @@ asmlinkage void start_secondary(void)
cpu = smp_processor_id();
cpu_data[cpu].udelay_val = loops_per_jiffy;
+ set_cpu_sibling_map(cpu);
+ set_cpu_core_map(cpu);
+
cpumask_set_cpu(cpu, &cpu_coherent_mask);
notify_cpu_starting(cpu);
@@ -362,9 +365,6 @@ asmlinkage void start_secondary(void)
/* The CPU is running and counters synchronised, now mark it online */
set_cpu_online(cpu, true);
- set_cpu_sibling_map(cpu);
- set_cpu_core_map(cpu);
-
calculate_cpu_foreign_map();
/*
--
2.34.1
From: Kai Lueke <[email protected]>
commit a3d9001b4e287fc043e5539d03d71a32ab114bcb upstream.
This reverts commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 because ID
0 was meant to be used for configuring the policy/state without
matching for a specific interface (e.g., Cilium is affected, see
https://github.com/cilium/cilium/pull/18789 and
https://github.com/cilium/cilium/pull/19019).
Signed-off-by: Kai Lueke <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_user.c | 21 +++------------------
1 file changed, 3 insertions(+), 18 deletions(-)
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -629,13 +629,8 @@ static struct xfrm_state *xfrm_state_con
xfrm_smark_init(attrs, &x->props.smark);
- if (attrs[XFRMA_IF_ID]) {
+ if (attrs[XFRMA_IF_ID])
x->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
- if (!x->if_id) {
- err = -EINVAL;
- goto error;
- }
- }
err = __xfrm_init_state(x, false, attrs[XFRMA_OFFLOAD_DEV]);
if (err)
@@ -1431,13 +1426,8 @@ static int xfrm_alloc_userspi(struct sk_
mark = xfrm_mark_get(attrs, &m);
- if (attrs[XFRMA_IF_ID]) {
+ if (attrs[XFRMA_IF_ID])
if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
- if (!if_id) {
- err = -EINVAL;
- goto out_noput;
- }
- }
if (p->info.seq) {
x = xfrm_find_acq_byseq(net, mark, p->info.seq);
@@ -1750,13 +1740,8 @@ static struct xfrm_policy *xfrm_policy_c
xfrm_mark_get(attrs, &xp->mark);
- if (attrs[XFRMA_IF_ID]) {
+ if (attrs[XFRMA_IF_ID])
xp->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
- if (!xp->if_id) {
- err = -EINVAL;
- goto error;
- }
- }
return xp;
error:
From: Sascha Hauer <[email protected]>
[ Upstream commit be4e65bdffab5f588044325117df77dad7e9c45a ]
The binding specifies the clock order to "iahb", "isfr", "cec". Reorder
the clocks accordingly.
Signed-off-by: Sascha Hauer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/rk322x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 8eed9e3a92e9..5868eb512f69 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -718,8 +718,8 @@
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&cru SCLK_HDMI_PHY>;
assigned-clock-parents = <&hdmi_phy>;
- clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
- clock-names = "isfr", "iahb", "cec";
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+ clock-names = "iahb", "isfr", "cec";
pinctrl-names = "default";
pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
resets = <&cru SRST_HDMI_P>;
--
2.34.1
On Thu, 17 Mar 2022 13:45:51 +0100, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.16.16 release.
> There are 28 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 19 Mar 2022 12:45:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.16-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.16.16-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
From: Chengming Zhou <[email protected]>
[ Upstream commit b773827e361952b3f53ac6fa4c4e39ccd632102e ]
The error message when I build vm tests on debian10 (GLIBC 2.28):
userfaultfd.c: In function `userfaultfd_pagemap_test':
userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
in this function); did you mean `MADV_RANDOM'?
if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
^~~~~~~~~~~~
MADV_RANDOM
This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Chengming Zhou <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/vm/userfaultfd.c | 1 +
1 file changed, 1 insertion(+)
--- a/tools/testing/selftests/vm/userfaultfd.c
+++ b/tools/testing/selftests/vm/userfaultfd.c
@@ -46,6 +46,7 @@
#include <signal.h>
#include <poll.h>
#include <string.h>
+#include <linux/mman.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/ioctl.h>
From: Johannes Berg <[email protected]>
[ Upstream commit a6bce78262f5dd4b50510f0aa47f3995f7b185f3 ]
If an MFP station isn't authorized, the receiver will (or
at least should) drop the action frame since it's a robust
management frame, but if we're not authorized we haven't
installed keys yet. Refuse attempts to start a session as
they'd just time out.
Signed-off-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/20220203201528.ff4d5679dce9.I34bb1f2bc341e161af2d6faf74f91b332ba11285@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/agg-tx.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 74a878f213d3..1deb3d874a4b 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -9,7 +9,7 @@
* Copyright 2007, Michael Wu <[email protected]>
* Copyright 2007-2010, Intel Corporation
* Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2021 Intel Corporation
+ * Copyright (C) 2018 - 2022 Intel Corporation
*/
#include <linux/ieee80211.h>
@@ -626,6 +626,14 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
return -EINVAL;
}
+ if (test_sta_flag(sta, WLAN_STA_MFP) &&
+ !test_sta_flag(sta, WLAN_STA_AUTHORIZED)) {
+ ht_dbg(sdata,
+ "MFP STA not authorized - deny BA session request %pM tid %d\n",
+ sta->sta.addr, tid);
+ return -EINVAL;
+ }
+
/*
* 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
* member of an IBSS, and has no other existing Block Ack agreement
--
2.34.1
From: Jakob Unterwurzacher <[email protected]>
[ Upstream commit 62966cbdda8a92f82d966a45aa671e788b2006f7 ]
There are signal integrity issues running the eMMC at 200MHz on Puma
RK3399-Q7.
Similar to the work-around found for RK3399 Gru boards, lowering the
frequency to 100MHz made the eMMC much more stable, so let's lower the
frequency to 100MHz.
It might be possible to run at 150MHz as on RK3399 Gru boards but only
100MHz was extensively tested.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Jakob Unterwurzacher <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 002ece51c3ba..08fa00364b42 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -439,6 +439,12 @@
};
&sdhci {
+ /*
+ * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+ * enough.
+ */
+ max-frequency = <100000000>;
+
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
--
2.34.1
From: Ivan Vecera <[email protected]>
commit 5cb1ebdbc4342b1c2ce89516e19808d64417bdbc upstream.
Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.
Reproducer:
```
#!/bin/sh
ip link add lag0 type bond mode 1 miimon 100
ip link set lag0
for n in {1..10}; do
echo Cycle: $n
ip link set ens7f0 master lag0
sleep 1
ip link set ens7f0 nomaster
done
```
This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871] __schedule+0x2d1/0x830
[20976.219364] schedule+0x35/0xa0
[20976.222510] schedule_preempt_disabled+0xa/0x10
[20976.227043] __mutex_lock.isra.7+0x310/0x420
[20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079] ib_register_device+0x40d/0x580 [ib_core]
[20976.266139] irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409] irdma_probe+0x2c1/0x360 [irdma]
[20976.285691] auxiliary_bus_probe+0x45/0x70
[20976.289790] really_probe+0x1f2/0x480
[20976.298509] driver_probe_device+0x49/0xc0
[20976.302609] bus_for_each_drv+0x79/0xc0
[20976.306448] __device_attach+0xdc/0x160
[20976.310286] bus_probe_device+0x9d/0xb0
[20976.314128] device_add+0x43c/0x890
[20976.321287] __auxiliary_device_add+0x43/0x60
[20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109] ice_service_task+0xd0c/0xed0 [ice]
[20976.342591] process_one_work+0x1a7/0x360
[20976.350536] worker_thread+0x30/0x390
[20976.358128] kthread+0x10a/0x120
[20976.365547] ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921] __schedule+0x2d1/0x830
[20976.452414] schedule+0x35/0xa0
[20976.455559] schedule_preempt_disabled+0xa/0x10
[20976.460090] __mutex_lock.isra.7+0x310/0x420
[20976.464364] device_del+0x36/0x3c0
[20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288] notifier_call_chain+0x47/0x70
[20976.481386] __netdev_upper_dev_link+0x18b/0x280
[20976.489845] bond_enslave+0xe05/0x1790 [bonding]
[20976.494475] do_setlink+0x336/0xf50
[20976.502517] __rtnl_newlink+0x529/0x8b0
[20976.543441] rtnl_newlink+0x43/0x60
[20976.546934] rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238] netlink_rcv_skb+0x4c/0x120
[20976.563079] netlink_unicast+0x196/0x230
[20976.567005] netlink_sendmsg+0x204/0x3d0
[20976.570930] sock_sendmsg+0x4c/0x50
[20976.574423] ____sys_sendmsg+0x1eb/0x250
[20976.586807] ___sys_sendmsg+0x7c/0xc0
[20976.606353] __sys_sendmsg+0x57/0xa0
[20976.609930] do_syscall_64+0x5b/0x1a0
[20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca
1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
is called from ice_service_task() context, aux device is created
and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
RTNL lock and that notifier calls ice_unplug_aux_dev(). That
function tries to take aux device->lock but this is already taken
by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
taken in step 2
4. Dead-lock
The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
then ice_unplug_aux_dev() is called. If it is set (in other words
plugging of aux device was requested and ice_plug_aux_dev() is
potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
whether it was already cleared by ice_clear_rdma_cap(). If so then
aux device is unplugged.
Signed-off-by: Ivan Vecera <[email protected]>
Co-developed-by: Petr Oros <[email protected]>
Signed-off-by: Petr Oros <[email protected]>
Reviewed-by: Dave Ertman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ice/ice.h | 11 ++++++++++-
drivers/net/ethernet/intel/ice/ice_main.c | 12 +++++++++++-
2 files changed, 21 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -891,7 +891,16 @@ static inline void ice_set_rdma_cap(stru
*/
static inline void ice_clear_rdma_cap(struct ice_pf *pf)
{
- ice_unplug_aux_dev(pf);
+ /* We can directly unplug aux device here only if the flag bit
+ * ICE_FLAG_PLUG_AUX_DEV is not set because ice_unplug_aux_dev()
+ * could race with ice_plug_aux_dev() called from
+ * ice_service_task(). In this case we only clear that bit now and
+ * aux device will be unplugged later once ice_plug_aux_device()
+ * called from ice_service_task() finishes (see ice_service_task()).
+ */
+ if (!test_and_clear_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags))
+ ice_unplug_aux_dev(pf);
+
clear_bit(ICE_FLAG_RDMA_ENA, pf->flags);
clear_bit(ICE_FLAG_AUX_ENA, pf->flags);
}
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -2237,9 +2237,19 @@ static void ice_service_task(struct work
return;
}
- if (test_and_clear_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags))
+ if (test_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags)) {
+ /* Plug aux device per request */
ice_plug_aux_dev(pf);
+ /* Mark plugging as done but check whether unplug was
+ * requested during ice_plug_aux_dev() call
+ * (e.g. from ice_clear_rdma_cap()) and if so then
+ * plug aux device.
+ */
+ if (!test_and_clear_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags))
+ ice_unplug_aux_dev(pf);
+ }
+
if (test_and_clear_bit(ICE_FLAG_MTU_CHANGED, pf->flags)) {
struct iidc_event *event;
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 8fd9415042826c7609c588e5ef45f3e84237785f ]
Fixes dtbs_check warnings like:
dmac@ff240000: $nodename:0: 'dmac@ff240000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 00f50b05d55a..b72874c16a71 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -711,7 +711,7 @@
clock-names = "pclk", "timer";
};
- dmac: dmac@ff240000 {
+ dmac: dma-controller@ff240000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff240000 0x0 0x4000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 39db0b85b4da..b822533dc7f1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -489,7 +489,7 @@
status = "disabled";
};
- dmac: dmac@ff1f0000 {
+ dmac: dma-controller@ff1f0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff1f0000 0x0 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
--
2.34.1
From: Sreeramya Soratkal <[email protected]>
[ Upstream commit e50b88c4f076242358b66ddb67482b96947438f2 ]
The wdev channel information is updated post channel switch only for
the station mode and not for the other modes. Due to this, the P2P client
still points to the old value though it moved to the new channel
when the channel change is induced from the P2P GO.
Update the bss channel after CSA channel switch completion for P2P client
interface as well.
Signed-off-by: Sreeramya Soratkal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f73251828782..9b4bb1460cef 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -17757,7 +17757,8 @@ void cfg80211_ch_switch_notify(struct net_device *dev,
wdev->chandef = *chandef;
wdev->preset_chandef = *chandef;
- if (wdev->iftype == NL80211_IFTYPE_STATION &&
+ if ((wdev->iftype == NL80211_IFTYPE_STATION ||
+ wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) &&
!WARN_ON(!wdev->current_bss))
cfg80211_update_assoc_bss_entry(wdev, chandef->chan);
--
2.34.1
From: Yan Yan <[email protected]>
[ Upstream commit e03c3bba351f99ad932e8f06baa9da1afc418e02 ]
xfrm_migrate cannot handle address family change of an xfrm_state.
The symptons are the xfrm_state will be migrated to a wrong address,
and sending as well as receiving packets wil be broken.
This commit fixes it by breaking the original xfrm_state_clone
method into two steps so as to update the props.family before
running xfrm_init_state. As the result, xfrm_state's inner mode,
outer mode, type and IP header length in xfrm_state_migrate can
be updated with the new address family.
Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1885354
Signed-off-by: Yan Yan <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_state.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 291236d7676f..f7bfa1916968 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1578,9 +1578,6 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig,
memcpy(&x->mark, &orig->mark, sizeof(x->mark));
memcpy(&x->props.smark, &orig->props.smark, sizeof(x->props.smark));
- if (xfrm_init_state(x) < 0)
- goto error;
-
x->props.flags = orig->props.flags;
x->props.extra_flags = orig->props.extra_flags;
@@ -1667,6 +1664,11 @@ struct xfrm_state *xfrm_state_migrate(struct xfrm_state *x,
if (!xc)
return NULL;
+ xc->props.family = m->new_family;
+
+ if (xfrm_init_state(xc) < 0)
+ goto error;
+
memcpy(&xc->id.daddr, &m->new_daddr, sizeof(xc->id.daddr));
memcpy(&xc->props.saddr, &m->new_saddr, sizeof(xc->props.saddr));
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit 3916c3619599a3970d3e6f98fb430b7c46266ada ]
crypto-controller had a typo, fix it.
In the same time, rename it to just crypto
Signed-off-by: Corentin Labbe <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/rk3288.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index aaaa61875701..45a9d9b908d2 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -971,7 +971,7 @@
status = "disabled";
};
- crypto: cypto-controller@ff8a0000 {
+ crypto: crypto@ff8a0000 {
compatible = "rockchip,rk3288-crypto";
reg = <0x0 0xff8a0000 0x0 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
--
2.34.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit d4e26aaea7f82ba884dcb4acfe689406bc092dc3 ]
The function ioremap() in fs_init() can fail, so its return value should
be checked.
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/atm/firestream.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 3bc3c314a467..4f67404fe64c 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1676,6 +1676,8 @@ static int fs_init(struct fs_dev *dev)
dev->hw_base = pci_resource_start(pci_dev, 0);
dev->base = ioremap(dev->hw_base, 0x1000);
+ if (!dev->base)
+ return 1;
reset_chip (dev);
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit c5048a7b2c23ab589f3476a783bd586b663eda5b ]
Register the CAN device only when all the necessary initialization is
completed. This patch makes sure all the data structures and locks are
initialized before registering the CAN device.
Link: https://lore.kernel.org/all/[email protected]
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Pavel Machek <[email protected]>
Reviewed-by: Ulrich Hecht <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/rcar/rcar_canfd.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 137eea4c7bad..4871428859fd 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1716,15 +1716,15 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll,
RCANFD_NAPI_WEIGHT);
+ spin_lock_init(&priv->tx_lock);
+ devm_can_led_init(ndev);
+ gpriv->ch[priv->channel] = priv;
err = register_candev(ndev);
if (err) {
dev_err(&pdev->dev,
"register_candev() failed, error %d\n", err);
goto fail_candev;
}
- spin_lock_init(&priv->tx_lock);
- devm_can_led_init(ndev);
- gpriv->ch[priv->channel] = priv;
dev_info(&pdev->dev, "device registered (channel %u)\n", priv->channel);
return 0;
--
2.34.1
From: Julian Braha <[email protected]>
[ Upstream commit 11c57c3ba94da74c3446924260e34e0b1950b5d7 ]
Resending this to properly add it to the patch tracker - thanks for letting
me know, Arnd :)
When ARM is enabled, and BITREVERSE is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE
Depends on [n]: BITREVERSE [=n]
Selected by [y]:
- ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n]
This is because ARM selects HAVE_ARCH_BITREVERSE
without selecting BITREVERSE, despite
HAVE_ARCH_BITREVERSE depending on BITREVERSE.
This unmet dependency bug was found by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Signed-off-by: Julian Braha <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/lib/Kconfig b/lib/Kconfig
index 5e7165e6a346..fa4b10322efc 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -45,7 +45,6 @@ config BITREVERSE
config HAVE_ARCH_BITREVERSE
bool
default n
- depends on BITREVERSE
help
This option enables the use of hardware bit-reversal instructions on
architectures which support such operations.
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 8ccffe9ac3239e549beaa0a9d5e1a1eac94e866c ]
Fix an error message and report the correct failing function.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index babc955ba64e..b47a8237c6dd 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8212,7 +8212,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
rc = dma_set_coherent_mask(&pdev->dev, persist_dma_mask);
if (rc) {
dev_err(&pdev->dev,
- "pci_set_consistent_dma_mask failed, aborting\n");
+ "dma_set_coherent_mask failed, aborting\n");
goto err_out_unmap;
}
} else if ((rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) != 0) {
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit d982992669733dd75520000c6057d8ee0725a363 ]
ACPI/x86 devices with a Cherry Trail SoC should have a GpioInt + a regular
GPIO ACPI resource in their ACPI tables.
Some CHT devices have a bug, where the also is bogus interrupt resource
(likely copied from a previous Bay Trail based generation of the device).
The i2c-core-acpi code will assign the bogus, non-working, interrupt
resource to client->irq. Add a workaround to fix this up.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2043960
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/goodix.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index e053aadea3c9..d3136842b717 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -745,7 +745,7 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
const struct acpi_gpio_mapping *gpio_mapping = NULL;
struct device *dev = &ts->client->dev;
LIST_HEAD(resources);
- int ret;
+ int irq, ret;
ts->gpio_count = 0;
ts->gpio_int_idx = -1;
@@ -758,6 +758,20 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
acpi_dev_free_resource_list(&resources);
+ /*
+ * CHT devices should have a GpioInt + a regular GPIO ACPI resource.
+ * Some CHT devices have a bug (where the also is bogus Interrupt
+ * resource copied from a previous BYT based generation). i2c-core-acpi
+ * will use the non-working Interrupt resource, fix this up.
+ */
+ if (soc_intel_is_cht() && ts->gpio_count == 2 && ts->gpio_int_idx != -1) {
+ irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
+ if (irq > 0 && irq != ts->client->irq) {
+ dev_warn(dev, "Overriding IRQ %d -> %d\n", ts->client->irq, irq);
+ ts->client->irq = irq;
+ }
+ }
+
if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
gpio_mapping = acpi_goodix_int_first_gpios;
--
2.34.1
From: Yan Yan <[email protected]>
[ Upstream commit c1aca3080e382886e2e58e809787441984a2f89b ]
This patch enables distinguishing SAs and SPs based on if_id during
the xfrm_migrate flow. This ensures support for xfrm interfaces
throughout the SA/SP lifecycle.
When there are multiple existing SPs with the same direction,
the same xfrm_selector and different endpoint addresses,
xfrm_migrate might fail with ENODATA.
Specifically, the code path for performing xfrm_migrate is:
Stage 1: find policy to migrate with
xfrm_migrate_policy_find(sel, dir, type, net)
Stage 2: find and update state(s) with
xfrm_migrate_state_find(mp, net)
Stage 3: update endpoint address(es) of template(s) with
xfrm_policy_migrate(pol, m, num_migrate)
Currently "Stage 1" always returns the first xfrm_policy that
matches, and "Stage 3" looks for the xfrm_tmpl that matches the
old endpoint address. Thus if there are multiple xfrm_policy
with same selector, direction, type and net, "Stage 1" might
rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA
because it cannot find a xfrm_tmpl with the matching endpoint
address.
The fix is to allow userspace to pass an if_id and add if_id
to the matching rule in Stage 1 and Stage 2 since if_id is a
unique ID for xfrm_policy and xfrm_state. For compatibility,
if_id will only be checked if the attribute is set.
Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1668886
Signed-off-by: Yan Yan <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/xfrm.h | 5 +++--
net/key/af_key.c | 2 +-
net/xfrm/xfrm_policy.c | 14 ++++++++------
net/xfrm/xfrm_state.c | 7 ++++++-
net/xfrm/xfrm_user.c | 6 +++++-
5 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 301a164f17e9..358dfe6fefef 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1679,14 +1679,15 @@ int km_migrate(const struct xfrm_selector *sel, u8 dir, u8 type,
const struct xfrm_migrate *m, int num_bundles,
const struct xfrm_kmaddress *k,
const struct xfrm_encap_tmpl *encap);
-struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *net);
+struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *net,
+ u32 if_id);
struct xfrm_state *xfrm_state_migrate(struct xfrm_state *x,
struct xfrm_migrate *m,
struct xfrm_encap_tmpl *encap);
int xfrm_migrate(const struct xfrm_selector *sel, u8 dir, u8 type,
struct xfrm_migrate *m, int num_bundles,
struct xfrm_kmaddress *k, struct net *net,
- struct xfrm_encap_tmpl *encap);
+ struct xfrm_encap_tmpl *encap, u32 if_id);
#endif
int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport);
diff --git a/net/key/af_key.c b/net/key/af_key.c
index de24a7d474df..9bf52a09b5ff 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2623,7 +2623,7 @@ static int pfkey_migrate(struct sock *sk, struct sk_buff *skb,
}
return xfrm_migrate(&sel, dir, XFRM_POLICY_TYPE_MAIN, m, i,
- kma ? &k : NULL, net, NULL);
+ kma ? &k : NULL, net, NULL, 0);
out:
return err;
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 4924b9135c6e..fbc0b2798184 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -4257,7 +4257,7 @@ static bool xfrm_migrate_selector_match(const struct xfrm_selector *sel_cmp,
}
static struct xfrm_policy *xfrm_migrate_policy_find(const struct xfrm_selector *sel,
- u8 dir, u8 type, struct net *net)
+ u8 dir, u8 type, struct net *net, u32 if_id)
{
struct xfrm_policy *pol, *ret = NULL;
struct hlist_head *chain;
@@ -4266,7 +4266,8 @@ static struct xfrm_policy *xfrm_migrate_policy_find(const struct xfrm_selector *
spin_lock_bh(&net->xfrm.xfrm_policy_lock);
chain = policy_hash_direct(net, &sel->daddr, &sel->saddr, sel->family, dir);
hlist_for_each_entry(pol, chain, bydst) {
- if (xfrm_migrate_selector_match(sel, &pol->selector) &&
+ if ((if_id == 0 || pol->if_id == if_id) &&
+ xfrm_migrate_selector_match(sel, &pol->selector) &&
pol->type == type) {
ret = pol;
priority = ret->priority;
@@ -4278,7 +4279,8 @@ static struct xfrm_policy *xfrm_migrate_policy_find(const struct xfrm_selector *
if ((pol->priority >= priority) && ret)
break;
- if (xfrm_migrate_selector_match(sel, &pol->selector) &&
+ if ((if_id == 0 || pol->if_id == if_id) &&
+ xfrm_migrate_selector_match(sel, &pol->selector) &&
pol->type == type) {
ret = pol;
break;
@@ -4394,7 +4396,7 @@ static int xfrm_migrate_check(const struct xfrm_migrate *m, int num_migrate)
int xfrm_migrate(const struct xfrm_selector *sel, u8 dir, u8 type,
struct xfrm_migrate *m, int num_migrate,
struct xfrm_kmaddress *k, struct net *net,
- struct xfrm_encap_tmpl *encap)
+ struct xfrm_encap_tmpl *encap, u32 if_id)
{
int i, err, nx_cur = 0, nx_new = 0;
struct xfrm_policy *pol = NULL;
@@ -4413,14 +4415,14 @@ int xfrm_migrate(const struct xfrm_selector *sel, u8 dir, u8 type,
}
/* Stage 1 - find policy */
- if ((pol = xfrm_migrate_policy_find(sel, dir, type, net)) == NULL) {
+ if ((pol = xfrm_migrate_policy_find(sel, dir, type, net, if_id)) == NULL) {
err = -ENOENT;
goto out;
}
/* Stage 2 - find and update state(s) */
for (i = 0, mp = m; i < num_migrate; i++, mp++) {
- if ((x = xfrm_migrate_state_find(mp, net))) {
+ if ((x = xfrm_migrate_state_find(mp, net, if_id))) {
x_cur[nx_cur] = x;
nx_cur++;
xc = xfrm_state_migrate(x, mp, encap);
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 100b4b3723e7..291236d7676f 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1605,7 +1605,8 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig,
return NULL;
}
-struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *net)
+struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *net,
+ u32 if_id)
{
unsigned int h;
struct xfrm_state *x = NULL;
@@ -1621,6 +1622,8 @@ struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *n
continue;
if (m->reqid && x->props.reqid != m->reqid)
continue;
+ if (if_id != 0 && x->if_id != if_id)
+ continue;
if (!xfrm_addr_equal(&x->id.daddr, &m->old_daddr,
m->old_family) ||
!xfrm_addr_equal(&x->props.saddr, &m->old_saddr,
@@ -1636,6 +1639,8 @@ struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *n
if (x->props.mode != m->mode ||
x->id.proto != m->proto)
continue;
+ if (if_id != 0 && x->if_id != if_id)
+ continue;
if (!xfrm_addr_equal(&x->id.daddr, &m->old_daddr,
m->old_family) ||
!xfrm_addr_equal(&x->props.saddr, &m->old_saddr,
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 17f0623c4508..a8c142bd1263 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -2592,6 +2592,7 @@ static int xfrm_do_migrate(struct sk_buff *skb, struct nlmsghdr *nlh,
int n = 0;
struct net *net = sock_net(skb->sk);
struct xfrm_encap_tmpl *encap = NULL;
+ u32 if_id = 0;
if (attrs[XFRMA_MIGRATE] == NULL)
return -EINVAL;
@@ -2616,7 +2617,10 @@ static int xfrm_do_migrate(struct sk_buff *skb, struct nlmsghdr *nlh,
return -ENOMEM;
}
- err = xfrm_migrate(&pi->sel, pi->dir, type, m, n, kmp, net, encap);
+ if (attrs[XFRMA_IF_ID])
+ if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+
+ err = xfrm_migrate(&pi->sel, pi->dir, type, m, n, kmp, net, encap, if_id);
kfree(encap);
--
2.34.1
From: Golan Ben Ami <[email protected]>
[ Upstream commit 1db5fcbba2631277b78d7f8aff99c9607d29f6d8 ]
Some APs misbehave when TWT is used and cause our firmware to crash.
We don't know a reasonable way to detect and work around this problem
in the FW yet. To prevent these crashes, disable TWT in the driver by
stopping to advertise TWT support.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523
Signed-off-by: Golan Ben Ami <[email protected]>
[reworded the commit message]
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 3 +--
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 1 -
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
index f470f9aea50f..c97798f6290a 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
@@ -552,8 +552,7 @@ static const struct ieee80211_sband_iftype_data iwl_he_capa[] = {
.has_he = true,
.he_cap_elem = {
.mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE |
- IEEE80211_HE_MAC_CAP0_TWT_REQ,
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
.mac_cap_info[1] =
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index cde3d2ce0b85..a65024fc96dd 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -223,7 +223,6 @@ static const u8 he_if_types_ext_capa_sta[] = {
[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
- [9] = WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT,
};
static const struct wiphy_iftype_ext_capab he_iftypes_ext_capa[] = {
--
2.34.1
On 3/17/22 5:45 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.16 release.
> There are 28 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 19 Mar 2022 12:45:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.16-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On Thu, Mar 17, 2022 at 01:45:51PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.16 release.
> There are 28 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 19 Mar 2022 12:45:16 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 488 pass: 488 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Thu, 17 Mar 2022 at 18:24, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.16.16 release.
> There are 28 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 19 Mar 2022 12:45:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.16-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.16.16-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.16.y
* git commit: 106ac438092ed9bef8fb4c61ec6ad5aa9eedda32
* git describe: v5.16.15-29-g106ac438092e
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.16.y/build/v5.16.15-29-g106ac438092e
## Test Regressions (compared to v5.16.14)
No test regressions found.
## Metric Regressions (compared to v5.16.14)
No metric regressions found.
## Test Fixes (compared to v5.16.14)
No test fixes found.
## Metric Fixes (compared to v5.16.14)
No metric fixes found.
## Test result summary
total: 108765, pass: 92041, fail: 1149, skip: 14385, xfail: 1190
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 296 total, 293 passed, 3 failed
* arm64: 47 total, 47 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 45 total, 41 passed, 4 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 41 total, 38 passed, 3 failed
* parisc: 14 total, 14 passed, 0 failed
* powerpc: 65 total, 50 passed, 15 failed
* riscv: 32 total, 27 passed, 5 failed
* s390: 26 total, 23 passed, 3 failed
* sh: 26 total, 24 passed, 2 failed
* sparc: 14 total, 14 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 47 total, 47 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* pre[
* prep-inline
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
On 17/03/22 19.45, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.16 release.
> There are 28 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0)
and powerpc (ps3_defconfig, gcc 11.2.0).
Tested-by: Bagas Sanjaya <[email protected]>
--
An old man doll... just what I always wanted! - Clara
On Thu, Mar 17, 2022 at 01:45:51PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.16 release.
> There are 28 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 19 Mar 2022 12:45:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.16-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le,
s390x, x86_64), and boot tested x86_64. No regressions noted.
Tested-by: Justin M. Forbes <[email protected]>
On 3/17/22 5:45 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.16 release.
> There are 28 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 19 Mar 2022 12:45:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.16-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <[email protected]>
On Thu, Mar 17, 2022 at 01:45:51PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.16 release.
> There are 28 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
Hi Greg,
5.16.16-rc1 tested.
Run tested on:
- Allwinner H6 (Tanix TX6)
- Intel Tiger Lake x86_64 (nuc11 i7-1165G7)
In addition - build tested on:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- NXP iMX6
- NXP iMX8
- Qualcomm Dragonboard
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro
- Samsung Exynos
Tested-by: Rudi Heitbaum <[email protected]>
--
Rudi