2021-12-15 16:34:10

by Thara Gopinath

Subject: [Patch v2 1/3] thermal: qcom: lmh: Add support for sm8150

Add compatible to support LMh for sm8150 SoC.
sm8150 does not require explicit enabling for various LMh subsystems.
Add a variable indicating the same as match data which is set for sdm845.
Execute the piece of code enabling various LMh subsystems only if
enable algorithm match data is present.

Signed-off-by: Thara Gopinath <[email protected]>
---

v1->v2:
- Added LMH_ENABLE_ALGOS of_device_id match data to indicate
whether LMh subsytems need explicit enabling or not.

drivers/thermal/qcom/lmh.c | 62 +++++++++++++++++++++-----------------
1 file changed, 35 insertions(+), 27 deletions(-)

diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index eafa7526eb8b..80d26d043498 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -28,6 +28,8 @@

#define LMH_REG_DCVS_INTR_CLR 0x8

+#define LMH_ENABLE_ALGOS ((void *)1)
+
struct lmh_hw_data {
void __iomem *base;
struct irq_domain *domain;
@@ -87,6 +89,7 @@ static int lmh_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ const struct of_device_id *of_id;
struct device_node *cpu_node;
struct lmh_hw_data *lmh_data;
int temp_low, temp_high, temp_arm, cpu_id, ret;
@@ -141,32 +144,36 @@ static int lmh_probe(struct platform_device *pdev)
if (!qcom_scm_lmh_dcvsh_available())
return -EINVAL;

- ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
- LMH_NODE_DCVS, node_id, 0);
- if (ret)
- dev_err(dev, "Error %d enabling current subfunction\n", ret);
-
- ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
- LMH_NODE_DCVS, node_id, 0);
- if (ret)
- dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
-
- ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
- LMH_NODE_DCVS, node_id, 0);
- if (ret)
- dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
-
- ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
- LMH_NODE_DCVS, node_id, 0);
- if (ret) {
- dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
- return ret;
- }
-
- ret = qcom_scm_lmh_profile_change(0x1);
- if (ret) {
- dev_err(dev, "Error %d changing profile\n", ret);
- return ret;
+ of_id = of_match_device(dev->driver->of_match_table, dev);
+
+ if (of_id && of_id->data == LMH_ENABLE_ALGOS) {
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling current subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret) {
+ dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
+ return ret;
+ }
+
+ ret = qcom_scm_lmh_profile_change(0x1);
+ if (ret) {
+ dev_err(dev, "Error %d changing profile\n", ret);
+ return ret;
+ }
}

/* Set default thermal trips */
@@ -213,7 +220,8 @@ static int lmh_probe(struct platform_device *pdev)
}

static const struct of_device_id lmh_table[] = {
- { .compatible = "qcom,sdm845-lmh", },
+ { .compatible = "qcom,sdm845-lmh", .data = LMH_ENABLE_ALGOS},
+ { .compatible = "qcom,sm8150-lmh", },
{}
};
MODULE_DEVICE_TABLE(of, lmh_table);
--
2.25.1

2021-12-20 12:04:09

by Daniel Lezcano

Subject: Re: [Patch v2 1/3] thermal: qcom: lmh: Add support for sm8150

On 15/12/2021 17:33, Thara Gopinath wrote:
> Add compatible to support LMh for sm8150 SoC.
> sm8150 does not require explicit enabling for various LMh subsystems.
> Add a variable indicating the same as match data which is set for sdm845.
> Execute the piece of code enabling various LMh subsystems only if
> enable algorithm match data is present.
>
> Signed-off-by: Thara Gopinath <[email protected]>
> ---
>
> v1->v2:
> - Added LMH_ENABLE_ALGOS of_device_id match data to indicate
> whether LMh subsytems need explicit enabling or not.
>
> drivers/thermal/qcom/lmh.c | 62 +++++++++++++++++++++-----------------
> 1 file changed, 35 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
> index eafa7526eb8b..80d26d043498 100644
> --- a/drivers/thermal/qcom/lmh.c
> +++ b/drivers/thermal/qcom/lmh.c
> @@ -28,6 +28,8 @@
>
> #define LMH_REG_DCVS_INTR_CLR 0x8
>
> +#define LMH_ENABLE_ALGOS ((void *)1)

It will be nicer a probe function here

> +
> struct lmh_hw_data {
> void __iomem *base;
> struct irq_domain *domain;
> @@ -87,6 +89,7 @@ static int lmh_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct device_node *np = dev->of_node;
> + const struct of_device_id *of_id;
> struct device_node *cpu_node;
> struct lmh_hw_data *lmh_data;
> int temp_low, temp_high, temp_arm, cpu_id, ret;
> @@ -141,32 +144,36 @@ static int lmh_probe(struct platform_device *pdev)
> if (!qcom_scm_lmh_dcvsh_available())
> return -EINVAL;
>
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> - if (ret)
> - dev_err(dev, "Error %d enabling current subfunction\n", ret);
> -
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> - if (ret)
> - dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
> -
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> - if (ret)
> - dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
> -
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> - if (ret) {
> - dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
> - return ret;
> - }
> -
> - ret = qcom_scm_lmh_profile_change(0x1);
> - if (ret) {
> - dev_err(dev, "Error %d changing profile\n", ret);
> - return ret;
> + of_id = of_match_device(dev->driver->of_match_table, dev);
> +
> + if (of_id && of_id->data == LMH_ENABLE_ALGOS) {
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
> + LMH_NODE_DCVS, node_id, 0);
> + if (ret)
> + dev_err(dev, "Error %d enabling current subfunction\n", ret);
> +
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
> + LMH_NODE_DCVS, node_id, 0);
> + if (ret)
> + dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
> +
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
> + LMH_NODE_DCVS, node_id, 0);
> + if (ret)
> + dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
> +
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
> + LMH_NODE_DCVS, node_id, 0);
> + if (ret) {
> + dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
> + return ret;
> + }
> +
> + ret = qcom_scm_lmh_profile_change(0x1);
> + if (ret) {
> + dev_err(dev, "Error %d changing profile\n", ret);
> + return ret;
> + }
> }
>
> /* Set default thermal trips */
> @@ -213,7 +220,8 @@ static int lmh_probe(struct platform_device *pdev)
> }
>
> static const struct of_device_id lmh_table[] = {
> - { .compatible = "qcom,sdm845-lmh", },
> + { .compatible = "qcom,sdm845-lmh", .data = LMH_ENABLE_ALGOS},
> + { .compatible = "qcom,sm8150-lmh", },
> {}
> };
> MODULE_DEVICE_TABLE(of, lmh_table);
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

2022-01-05 19:18:10

by Thara Gopinath

Subject: Re: [Patch v2 1/3] thermal: qcom: lmh: Add support for sm8150

On 12/20/21 7:04 AM, Daniel Lezcano wrote:
> On 15/12/2021 17:33, Thara Gopinath wrote:
>> Add compatible to support LMh for sm8150 SoC.
>> sm8150 does not require explicit enabling for various LMh subsystems.
>> Add a variable indicating the same as match data which is set for sdm845.
>> Execute the piece of code enabling various LMh subsystems only if
>> enable algorithm match data is present.
>>
>> Signed-off-by: Thara Gopinath <[email protected]>
>> ---
>>
>> v1->v2:
>> - Added LMH_ENABLE_ALGOS of_device_id match data to indicate
>> whether LMh subsytems need explicit enabling or not.
>>
>> drivers/thermal/qcom/lmh.c | 62 +++++++++++++++++++++-----------------
>> 1 file changed, 35 insertions(+), 27 deletions(-)
>>
>> diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
>> index eafa7526eb8b..80d26d043498 100644
>> --- a/drivers/thermal/qcom/lmh.c
>> +++ b/drivers/thermal/qcom/lmh.c
>> @@ -28,6 +28,8 @@
>>
>> #define LMH_REG_DCVS_INTR_CLR 0x8
>>
>> +#define LMH_ENABLE_ALGOS ((void *)1)
>
> It will be nicer a probe function here

Hello Daniel,

As we discussed, there are SoCs for which all the algorithms need not be
enabled. So introducing a separate probe function for each will be
clumsy. The idea here is to use flags (currently just one to specify
whether the algorithms need to be enabled or not) to specify which
algorithms to be enabled.


--
Warm Regards
Thara (She/Her/Hers)
>
>> +
>> struct lmh_hw_data {
>> void __iomem *base;
>> struct irq_domain *domain;
>> @@ -87,6 +89,7 @@ static int lmh_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> struct device_node *np = dev->of_node;
>> + const struct of_device_id *of_id;
>> struct device_node *cpu_node;
>> struct lmh_hw_data *lmh_data;
>> int temp_low, temp_high, temp_arm, cpu_id, ret;
>> @@ -141,32 +144,36 @@ static int lmh_probe(struct platform_device *pdev)
>> if (!qcom_scm_lmh_dcvsh_available())
>> return -EINVAL;
>>
>> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
>> - LMH_NODE_DCVS, node_id, 0);
>> - if (ret)
>> - dev_err(dev, "Error %d enabling current subfunction\n", ret);
>> -
>> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
>> - LMH_NODE_DCVS, node_id, 0);
>> - if (ret)
>> - dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
>> -
>> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
>> - LMH_NODE_DCVS, node_id, 0);
>> - if (ret)
>> - dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
>> -
>> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
>> - LMH_NODE_DCVS, node_id, 0);
>> - if (ret) {
>> - dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
>> - return ret;
>> - }
>> -
>> - ret = qcom_scm_lmh_profile_change(0x1);
>> - if (ret) {
>> - dev_err(dev, "Error %d changing profile\n", ret);
>> - return ret;
>> + of_id = of_match_device(dev->driver->of_match_table, dev);
>> +
>> + if (of_id && of_id->data == LMH_ENABLE_ALGOS) {
>> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
>> + LMH_NODE_DCVS, node_id, 0);
>> + if (ret)
>> + dev_err(dev, "Error %d enabling current subfunction\n", ret);
>> +
>> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
>> + LMH_NODE_DCVS, node_id, 0);
>> + if (ret)
>> + dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
>> +
>> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
>> + LMH_NODE_DCVS, node_id, 0);
>> + if (ret)
>> + dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
>> +
>> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
>> + LMH_NODE_DCVS, node_id, 0);
>> + if (ret) {
>> + dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = qcom_scm_lmh_profile_change(0x1);
>> + if (ret) {
>> + dev_err(dev, "Error %d changing profile\n", ret);
>> + return ret;
>> + }
>> }
>>
>> /* Set default thermal trips */
>> @@ -213,7 +220,8 @@ static int lmh_probe(struct platform_device *pdev)
>> }
>>
>> static const struct of_device_id lmh_table[] = {
>> - { .compatible = "qcom,sdm845-lmh", },
>> + { .compatible = "qcom,sdm845-lmh", .data = LMH_ENABLE_ALGOS},
>> + { .compatible = "qcom,sm8150-lmh", },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, lmh_table);
>>
>
>

2022-01-05 21:51:45

by Bjorn Andersson

Subject: Re: [Patch v2 1/3] thermal: qcom: lmh: Add support for sm8150

On Wed 15 Dec 08:33 PST 2021, Thara Gopinath wrote:

> Add compatible to support LMh for sm8150 SoC.
> sm8150 does not require explicit enabling for various LMh subsystems.
> Add a variable indicating the same as match data which is set for sdm845.
> Execute the piece of code enabling various LMh subsystems only if
> enable algorithm match data is present.
>
> Signed-off-by: Thara Gopinath <[email protected]>
> ---
>
> v1->v2:
> - Added LMH_ENABLE_ALGOS of_device_id match data to indicate
> whether LMh subsytems need explicit enabling or not.
>
> drivers/thermal/qcom/lmh.c | 62 +++++++++++++++++++++-----------------
> 1 file changed, 35 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
> index eafa7526eb8b..80d26d043498 100644
> --- a/drivers/thermal/qcom/lmh.c
> +++ b/drivers/thermal/qcom/lmh.c
> @@ -28,6 +28,8 @@
>
> #define LMH_REG_DCVS_INTR_CLR 0x8
>
> +#define LMH_ENABLE_ALGOS ((void *)1)
> +
> struct lmh_hw_data {
> void __iomem *base;
> struct irq_domain *domain;
> @@ -87,6 +89,7 @@ static int lmh_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct device_node *np = dev->of_node;
> + const struct of_device_id *of_id;
> struct device_node *cpu_node;
> struct lmh_hw_data *lmh_data;
> int temp_low, temp_high, temp_arm, cpu_id, ret;
> @@ -141,32 +144,36 @@ static int lmh_probe(struct platform_device *pdev)
> if (!qcom_scm_lmh_dcvsh_available())
> return -EINVAL;
>
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> - if (ret)
> - dev_err(dev, "Error %d enabling current subfunction\n", ret);
> -
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> - if (ret)
> - dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
> -
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> - if (ret)
> - dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
> -
> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
> - LMH_NODE_DCVS, node_id, 0);
> - if (ret) {
> - dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
> - return ret;
> - }
> -
> - ret = qcom_scm_lmh_profile_change(0x1);
> - if (ret) {
> - dev_err(dev, "Error %d changing profile\n", ret);
> - return ret;
> + of_id = of_match_device(dev->driver->of_match_table, dev);

I think it would be preferable to use of_device_get_match_data() and
assign this to an unsigned long.

> +
> + if (of_id && of_id->data == LMH_ENABLE_ALGOS) {

Then you don't need to check of_id for NULL here and this would lend
itself nicely to be a bitmask of enabled algorithms if some platform
would need to enable a subset of these.

> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
> + LMH_NODE_DCVS, node_id, 0);
> + if (ret)
> + dev_err(dev, "Error %d enabling current subfunction\n", ret);
> +
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
> + LMH_NODE_DCVS, node_id, 0);
> + if (ret)
> + dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
> +
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
> + LMH_NODE_DCVS, node_id, 0);
> + if (ret)
> + dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
> +
> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
> + LMH_NODE_DCVS, node_id, 0);
> + if (ret) {
> + dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
> + return ret;
> + }
> +
> + ret = qcom_scm_lmh_profile_change(0x1);
> + if (ret) {
> + dev_err(dev, "Error %d changing profile\n", ret);
> + return ret;
> + }
> }
>
> /* Set default thermal trips */
> @@ -213,7 +220,8 @@ static int lmh_probe(struct platform_device *pdev)
> }
>
> static const struct of_device_id lmh_table[] = {
> - { .compatible = "qcom,sdm845-lmh", },
> + { .compatible = "qcom,sdm845-lmh", .data = LMH_ENABLE_ALGOS},

Make LMH_ENABLE_ALGOS just an integer define and add the explicit (void
*) cast here.

Regards,
Bjorn

> + { .compatible = "qcom,sm8150-lmh", },
> {}
> };
> MODULE_DEVICE_TABLE(of, lmh_table);
> --
> 2.25.1
>

2022-01-06 15:52:54

by Thara Gopinath

Subject: Re: [Patch v2 1/3] thermal: qcom: lmh: Add support for sm8150

On 1/5/22 4:52 PM, Bjorn Andersson wrote:
> On Wed 15 Dec 08:33 PST 2021, Thara Gopinath wrote:
>
>> Add compatible to support LMh for sm8150 SoC.
>> sm8150 does not require explicit enabling for various LMh subsystems.
>> Add a variable indicating the same as match data which is set for sdm845.
>> Execute the piece of code enabling various LMh subsystems only if
>> enable algorithm match data is present.
>>
>> Signed-off-by: Thara Gopinath <[email protected]>
>> ---
>>
>> v1->v2:
>> - Added LMH_ENABLE_ALGOS of_device_id match data to indicate
>> whether LMh subsytems need explicit enabling or not.
>>
>> drivers/thermal/qcom/lmh.c | 62 +++++++++++++++++++++-----------------
>> 1 file changed, 35 insertions(+), 27 deletions(-)
>>
>> diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
>> index eafa7526eb8b..80d26d043498 100644
>> --- a/drivers/thermal/qcom/lmh.c
>> +++ b/drivers/thermal/qcom/lmh.c
>> @@ -28,6 +28,8 @@
>>
>> #define LMH_REG_DCVS_INTR_CLR 0x8
>>
>> +#define LMH_ENABLE_ALGOS ((void *)1)
>> +
>> struct lmh_hw_data {
>> void __iomem *base;
>> struct irq_domain *domain;
>> @@ -87,6 +89,7 @@ static int lmh_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> struct device_node *np = dev->of_node;
>> + const struct of_device_id *of_id;
>> struct device_node *cpu_node;
>> struct lmh_hw_data *lmh_data;
>> int temp_low, temp_high, temp_arm, cpu_id, ret;
>> @@ -141,32 +144,36 @@ static int lmh_probe(struct platform_device *pdev)
>> if (!qcom_scm_lmh_dcvsh_available())
>> return -EINVAL;
>>
>> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
>> - LMH_NODE_DCVS, node_id, 0);
>> - if (ret)
>> - dev_err(dev, "Error %d enabling current subfunction\n", ret);
>> -
>> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
>> - LMH_NODE_DCVS, node_id, 0);
>> - if (ret)
>> - dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
>> -
>> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
>> - LMH_NODE_DCVS, node_id, 0);
>> - if (ret)
>> - dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
>> -
>> - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
>> - LMH_NODE_DCVS, node_id, 0);
>> - if (ret) {
>> - dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
>> - return ret;
>> - }
>> -
>> - ret = qcom_scm_lmh_profile_change(0x1);
>> - if (ret) {
>> - dev_err(dev, "Error %d changing profile\n", ret);
>> - return ret;
>> + of_id = of_match_device(dev->driver->of_match_table, dev);
>
> I think it would be preferable to use of_device_get_match_data() and
> assign this to an unsigned long.

Sure.. I will fix this and the comment below and send out v3.

--
Warm Regards
Thara (She/Her/Hers)
>
>> +
>> + if (of_id && of_id->data == LMH_ENABLE_ALGOS) {
>
> Then you don't need to check of_id for NULL here and this would lend
> itself nicely to be a bitmask of enabled algorithms if some platform
> would need to enable a subset of these.
>
>> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
>> + LMH_NODE_DCVS, node_id, 0);
>> + if (ret)
>> + dev_err(dev, "Error %d enabling current subfunction\n", ret);
>> +
>> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
>> + LMH_NODE_DCVS, node_id, 0);
>> + if (ret)
>> + dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
>> +
>> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
>> + LMH_NODE_DCVS, node_id, 0);
>> + if (ret)
>> + dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
>> +
>> + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
>> + LMH_NODE_DCVS, node_id, 0);
>> + if (ret) {
>> + dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = qcom_scm_lmh_profile_change(0x1);
>> + if (ret) {
>> + dev_err(dev, "Error %d changing profile\n", ret);
>> + return ret;
>> + }
>> }
>>
>> /* Set default thermal trips */
>> @@ -213,7 +220,8 @@ static int lmh_probe(struct platform_device *pdev)
>> }
>>
>> static const struct of_device_id lmh_table[] = {
>> - { .compatible = "qcom,sdm845-lmh", },
>> + { .compatible = "qcom,sdm845-lmh", .data = LMH_ENABLE_ALGOS},
>
> Make LMH_ENABLE_ALGOS just an integer define and add the explicit (void
> *) cast here.
>
> Regards,
> Bjorn
>
>> + { .compatible = "qcom,sm8150-lmh", },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, lmh_table);
>> --
>> 2.25.1
>>