2002-10-20 18:40:06

by David Mansfield

Subject: [OOPS] in kdb v2.3 on top of 2.5.44

Hi Keith, list,

I tried patching the 2.5.44 vanilla kernel with the 2.3 you released for
2.5.43. The patching had only a few rejects, which were completely
trivial, but perhaps this mis-match of kernel to patch version caused the
oops, but here it is (starting from me successfully executing a few
commands inside the debugger):

[ snip kernel boot and beginning of kdb session ]

[1]kdb> bt
EBP EIP Function (args)
0xc0106ee0 0xc0106f0a default_idle+0x2a (0x0, 0x0, 0x0)
kernel .text 0xc0100000 0xc0106ee0
0xc0106f20
0xc0106fb2 cpu_idle+0x52
kernel .text 0xc0100000 0xc0106f60
0xc0106fd0
0xc0452dfd start_secondary+0x6d
kernel .init.text 0xc044c000 0xc0452d90
0xc0452e00
[1]kdb> go

[ time passes here while I use the system a bit - then I do ctrl-a again ]

Entering kdb (current=0xc0420e20, pid 0) on processor 0 due to Keyboard
Entry
Unable to handle kernel NULL pointer dereference at virtual address
00000000
printing eip:
c02b77c4
*pde = 00000000
Oops: 0002

CPU: 0
EIP: 0060:[<c02b77c4>] Not tainted
EFLAGS: 00010006
EIP is at kdba_setjmp+0x4/0x50
eax: 00000000 ebx: c044a000 ecx: 00000001 edx: 00000000
esi: 00000004 edi: c034409f ebp: c044a000 esp: c044be1c
ds: 0068 es: 0068 ss: 0068
Process swapper (pid: 0, threadinfo=c044a000 task=c0420e20)
Stack: c02084ec c04d4c40 00000000 00000000 00000000 00000000 00000000
00000002
ae50ded0 1750ded0 00000000 00000000 c036952e ffffffff c0369532
00000000
c02b7229 c036952e c036952e c044a000 c044a000 00000008 00000000
c020872c
Call Trace:
[<c02084ec>] kdb_local+0x2cc/0x3e0
[<c02b7229>] kdba_getregcontents+0x119/0x280
[<c020872c>] kdb_main_loop+0xbc/0x220
[<c02b76e4>] kdba_main_loop+0x54/0x60
[<c0208e49>] kdb+0x5b9/0x7e0
[<c0233c4c>] receive_chars+0x9c/0x290
[<c0234098>] serial8250_interrupt+0x88/0x120
[<c010ae9a>] handle_IRQ_event+0x3a/0x60
[<c010b0e6>] do_IRQ+0xc6/0x160
[<c0106ee0>] default_idle+0x0/0x40
[<c0106ee0>] default_idle+0x0/0x40
[<c01098d4>] common_interrupt+0x18/0x20
[<c0106ee0>] default_idle+0x0/0x40
[<c0106ee0>] default_idle+0x0/0x40
[<c0106f0a>] default_idle+0x2a/0x40
[<c0106fb2>] cpu_idle+0x52/0x70
[<c0105000>] stext+0x0/0x60
[<c0105051>] stext+0x51/0x60

Code: 89 58 00 89 70 04 89 78 08 8b 0c 24 89 48 0c 8d 4c 24 08 89
kdb: Debugger re-entered on cpu 0, new reason = 5
Not executing a kdb command
No longjmp available for recovery
Cannot recover, allowing event to proceed
<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing

My system is a dual PII-450 with 1GB ram (highmem 4g) running all SCSI
with an adaptec aic7xxx. System is redhat 7.3 based with official
updates.

David

--
/==============================\
| David Mansfield |
| [email protected] |
\==============================/

2002-10-22 08:28:28

by Keith Owens

Subject: Re: [OOPS] in kdb v2.3 on top of 2.5.44

On Sun, 20 Oct 2002 14:46:05 -0400 (EDT),
David Mansfield <[email protected]> wrote:
>EIP is at kdba_setjmp+0x4/0x50
>eax: 00000000 ebx: c044a000 ecx: 00000001 edx: 00000000
>esi: 00000004 edi: c034409f ebp: c044a000 esp: c044be1c

A kbuild change in 2.5.41 moved the initial setting of CFLAGS before
the include of .config. Now the global CFLAGS must not depend on any
config settings (totally undocumented, of course). kdba_setjmp was
compiled with CONFIG_FRAME_POINTERS=y from config.h, but gcc flags were
set to -fomit-frame-pointer, the mismatch generated bad code.

Will be fixed in next kdb patch, in the meantime, apply this over
kdb-v2.3-2.5.53-common-1.

Index: 43.2/Makefile
--- 43.2/Makefile Thu, 17 Oct 2002 15:02:15 +1000 kaos (linux-2.5/I/d/12_Makefile 1.41.1.10 444)
+++ 43.2(w)/Makefile Tue, 22 Oct 2002 18:17:22 +1000 kaos (linux-2.5/I/d/12_Makefile 1.41.1.10 444)
@@ -159,9 +159,6 @@ CPPFLAGS := -D__KERNEL__ -Iinclude
CPPFLAGS += $(patsubst %,-I%,$(CROSS_COMPILE_INC))
CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-fno-strict-aliasing -fno-common
-ifndef CONFIG_FRAME_POINTER
-CFLAGS += -fomit-frame-pointer
-endif
AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS)

export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION KERNELRELEASE ARCH \
@@ -212,6 +209,10 @@ include-config := 1

endif

+ifndef CONFIG_FRAME_POINTER
+CFLAGS += -fomit-frame-pointer
+endif
+
include arch/$(ARCH)/Makefile

core-y += kernel/ mm/ fs/ ipc/ security/