The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dtb: pwm@20f8000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
index 0c643706a158..4e8191a65211 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
@@ -14,7 +14,7 @@ / {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm7 0 5000000>;
+ pwms = <&pwm7 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -41,7 +41,6 @@ &lcdif {
};
&pwm7 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm7>;
status = "okay";
--
2.43.0