2006-01-09 12:36:16

by balamurugan

[permalink] [raw]
Subject: REG: problem i am facing

hi all,

i am using Fedora 1.0 and i am using kernel-2.6.15 and i am using
arm-linux-3.4.1 to cross compile, i am facing the problem while i am make
the compilation , in make menuconfig it will compiled correctly but we
make it compile it will showing one error as

fs/built-in.o(.data+0x22c4): undefined reference to `adfspart_check_ICS'
fs/built-in.o(.data+0x22c8): undefined reference to `adfspart_check_POWERTEC'
fs/built-in.o(.data+0x22cc): undefined reference to `adfspart_check_EESOX'
fs/built-in.o(.data+0x22d0): undefined reference to `adfspart_check_CUMANA'
fs/built-in.o(.data+0x22d4): undefined reference to `adfspart_check_ADFS'
make: *** [.tmp_vmlinux1] Error 1

pls give the solution for this problem ASAP , because i am now compiling
the ting u pls support us.

thanks and regards


2006-01-09 12:43:56

by Russell King

[permalink] [raw]
Subject: Re: REG: problem i am facing

On Mon, Jan 09, 2006 at 12:41:57PM -0000, [email protected] wrote:
> hi all,
>
> i am using Fedora 1.0 and i am using kernel-2.6.15 and i am using
> arm-linux-3.4.1 to cross compile, i am facing the problem while i am make
> the compilation , in make menuconfig it will compiled correctly but we
> make it compile it will showing one error as
>
> fs/built-in.o(.data+0x22c4): undefined reference to `adfspart_check_ICS'
> fs/built-in.o(.data+0x22c8): undefined reference to `adfspart_check_POWERTEC'
> fs/built-in.o(.data+0x22cc): undefined reference to `adfspart_check_EESOX'
> fs/built-in.o(.data+0x22d0): undefined reference to `adfspart_check_CUMANA'
> fs/built-in.o(.data+0x22d4): undefined reference to `adfspart_check_ADFS'
> make: *** [.tmp_vmlinux1] Error 1
>
> pls give the solution for this problem ASAP , because i am now compiling
> the ting u pls support us.

It looks like fs/partitions/Kconfig is messed up for one combination.
If ACORN_PARTITION is not set, we won't include any of the partition
support for Acorn formats, so we should not allow them to be selected.

Please try this patch:

diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig
--- a/fs/partitions/Kconfig
+++ b/fs/partitions/Kconfig
@@ -21,26 +21,30 @@ config ACORN_PARTITION
Support hard disks partitioned under Acorn operating systems.

config ACORN_PARTITION_CUMANA
- bool "Cumana partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ bool "Cumana partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
+ depends on ACORN_PARTITION
help
Say Y here if you would like to use hard disks under Linux which
were partitioned using the Cumana interface on Acorn machines.

config ACORN_PARTITION_EESOX
- bool "EESOX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ bool "EESOX partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
+ depends on ACORN_PARTITION

config ACORN_PARTITION_ICS
- bool "ICS partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ bool "ICS partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
+ depends on ACORN_PARTITION
help
Say Y here if you would like to use hard disks under Linux which
were partitioned using the ICS interface on Acorn machines.

config ACORN_PARTITION_ADFS
- bool "Native filecore partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ bool "Native filecore partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
+ depends on ACORN_PARTITION
help
The Acorn Disc Filing System is the standard file system of the
RiscOS operating system which runs on Acorn's ARM-based Risc PC
@@ -48,15 +52,17 @@ config ACORN_PARTITION_ADFS
`Y' here, Linux will support disk partitions created under ADFS.

config ACORN_PARTITION_POWERTEC
- bool "PowerTec partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ bool "PowerTec partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
+ depends on ACORN_PARTITION
help
Support reading partition tables created on Acorn machines using
the PowerTec SCSI drive.

config ACORN_PARTITION_RISCIX
- bool "RISCiX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ bool "RISCiX partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
+ depends on ACORN_PARTITION
help
Once upon a time, there was a native Unix port for the Acorn series
of machines called RISCiX. If you say 'Y' here, Linux will be able
@@ -224,5 +230,3 @@ config EFI_PARTITION
Say Y here if you would like to use hard disks under Linux which
were partitioned using EFI GPT. Presently only useful on the
IA-64 platform.
-
-# define_bool CONFIG_ACORN_PARTITION_CUMANA y


--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core