Hi Artur,
On 4/16/22 14:13, Artur Bujdoso wrote:
> Clean up unreferenced register definitons in hal headers.
>
> Signed-off-by: Artur Bujdoso <[email protected]>
> ---
> drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h | 36 +--
> drivers/staging/rtl8723bs/include/HalVerDef.h | 74 ++---
> .../staging/rtl8723bs/include/hal_com_reg.h | 297 +-----------------
> 3 files changed, 49 insertions(+), 358 deletions(-)
>
> diff --git a/drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h b/drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h
> index af50674b2a65..706aafe86d0d 100644
> --- a/drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h
> +++ b/drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h
> @@ -70,38 +70,34 @@ enum btc_chip_interface {
>
> enum {
> BTC_CHIP_UNDEF = 0,
> - BTC_CHIP_CSR_BC4 = 1,
> - BTC_CHIP_CSR_BC8 = 2,
> - BTC_CHIP_RTL8723A = 3,
> - BTC_CHIP_RTL8821 = 4,
> BTC_CHIP_RTL8723B = 5,
> BTC_CHIP_MAX
> };
>
> /* following is for wifi link status */
> -#define WIFI_STA_CONNECTED BIT0
> -#define WIFI_AP_CONNECTED BIT1
> -#define WIFI_HS_CONNECTED BIT2
> +#define WIFI_STA_CONNECTED BIT0
> +#define WIFI_AP_CONNECTED BIT1
> +#define WIFI_HS_CONNECTED BIT2
> #define WIFI_P2P_GO_CONNECTED BIT3
> #define WIFI_P2P_GC_CONNECTED BIT4
>
Should be done in separate patch
> struct btc_board_info {
> /* The following is some board information */
> u8 btChipType;
> - u8 pgAntNum; /* pg ant number */
> - u8 btdmAntNum; /* ant number for btdm */
> + u8 pgAntNum; /* pg ant number */
> + u8 btdmAntNum; /* ant number for btdm */
> u8 btdmAntPos; /* Bryant Add to indicate Antenna Position for (pgAntNum = 2) && (btdmAntNum = 1) (DPDT+1Ant case) */
> u8 singleAntPath; /* current used for 8723b only, 1 =>s0, 0 =>s1 */
> - /* bool bBtExist; */
> + /* bool bBtExist; */
> };
>
Should be done in separate patch
> enum {
> - BTC_RSSI_STATE_HIGH = 0x0,
> - BTC_RSSI_STATE_MEDIUM = 0x1,
> - BTC_RSSI_STATE_LOW = 0x2,
> - BTC_RSSI_STATE_STAY_HIGH = 0x3,
> - BTC_RSSI_STATE_STAY_MEDIUM = 0x4,
> - BTC_RSSI_STATE_STAY_LOW = 0x5,
> + BTC_RSSI_STATE_HIGH = 0x0,
> + BTC_RSSI_STATE_MEDIUM = 0x1,
> + BTC_RSSI_STATE_LOW = 0x2,
> + BTC_RSSI_STATE_STAY_HIGH = 0x3,
> + BTC_RSSI_STATE_STAY_MEDIUM = 0x4,
> + BTC_RSSI_STATE_STAY_LOW = 0x5,
> BTC_RSSI_MAX
> };
> #define BTC_RSSI_HIGH(_rssi_) ((_rssi_ == BTC_RSSI_STATE_HIGH || _rssi_ == BTC_RSSI_STATE_STAY_HIGH) ? true : false)
> @@ -122,7 +118,7 @@ enum {
> };
>
> enum {
> - BTC_WIFI_PNP_WAKE_UP = 0x0,
> + BTC_WIFI_PNP_WAKE_UP = 0x0,
> BTC_WIFI_PNP_SLEEP = 0x1,
> BTC_WIFI_PNP_MAX
> };
> @@ -211,7 +207,7 @@ enum {
>
> enum {
> BTC_DBG_DISP_COEX_STATISTICS = 0x0,
> - BTC_DBG_DISP_BT_LINK_INFO = 0x1,
> + BTC_DBG_DISP_BT_LINK_INFO = 0x1,
> BTC_DBG_DISP_FW_PWR_MODE_CMD = 0x2,
> BTC_DBG_DISP_MAX
> };
> @@ -235,13 +231,13 @@ enum {
> };
>
> enum {
> - BTC_ASSOCIATE_FINISH = 0x0,
> + BTC_ASSOCIATE_FINISH = 0x0,
> BTC_ASSOCIATE_START = 0x1,
> BTC_ASSOCIATE_MAX
> };
>
> enum {
> - BTC_MEDIA_DISCONNECT = 0x0,
> + BTC_MEDIA_DISCONNECT = 0x0,
> BTC_MEDIA_CONNECT = 0x1,
> BTC_MEDIA_MAX
> };
All white-space clean ups should be done in separate patch
> diff --git a/drivers/staging/rtl8723bs/include/HalVerDef.h b/drivers/staging/rtl8723bs/include/HalVerDef.h
> index 8f654a49fb9d..42c8ff90e824 100644
> --- a/drivers/staging/rtl8723bs/include/HalVerDef.h
> +++ b/drivers/staging/rtl8723bs/include/HalVerDef.h
> @@ -9,38 +9,29 @@
>
> /* hal_ic_type_e */
> enum hal_ic_type_e { /* tag_HAL_IC_Type_Definition */
> - CHIP_8192S = 0,
> - CHIP_8188C = 1,
> - CHIP_8192C = 2,
> - CHIP_8192D = 3,
> - CHIP_8723A = 4,
> - CHIP_8188E = 5,
> - CHIP_8812 = 6,
> - CHIP_8821 = 7,
> CHIP_8723B = 8,
> - CHIP_8192E = 9,
> };
>
Then why this enum is needed? ChipVersion.ICType looks set, but not used.
> /* hal_chip_type_e */
> enum hal_chip_type_e { /* tag_HAL_CHIP_Type_Definition */
> - TEST_CHIP = 0,
> + TEST_CHIP = 0,
> NORMAL_CHIP = 1,
> - FPGA = 2,
> + FPGA = 2,
> };
>
Again white-space clean ups
> /* hal_cut_version_e */
> enum hal_cut_version_e { /* tag_HAL_Cut_Version_Definition */
> - A_CUT_VERSION = 0,
> - B_CUT_VERSION = 1,
> - C_CUT_VERSION = 2,
> - D_CUT_VERSION = 3,
> - E_CUT_VERSION = 4,
> - F_CUT_VERSION = 5,
> - G_CUT_VERSION = 6,
> - H_CUT_VERSION = 7,
> - I_CUT_VERSION = 8,
> - J_CUT_VERSION = 9,
> - K_CUT_VERSION = 10,
> + A_CUT_VERSION = 0,
> + B_CUT_VERSION = 1,
> + C_CUT_VERSION = 2,
> + D_CUT_VERSION = 3,
> + E_CUT_VERSION = 4,
> + F_CUT_VERSION = 5,
> + G_CUT_VERSION = 6,
> + H_CUT_VERSION = 7,
> + I_CUT_VERSION = 8,
> + J_CUT_VERSION = 9,
> + K_CUT_VERSION = 10,
> };
and again...
With regards,
Pavel Skripkin