2023-07-10 05:36:55

by Randy Dunlap

[permalink] [raw]
Subject: [PATCH] coresight: fix spelling in etm3x ABI documentation

Correct spelling problems as identified by codespell.
Correct one grammar error.

Fixes: 7a25ec8e481e ("coresight: Adding ABI documentation")
Fixes: 7253e4c95616 ("coresight: etm3x: breaking down sysFS status interface")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: James Clark <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Mathieu Poirier <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x | 12 +++++-----
1 file changed, 6 insertions(+), 6 deletions(-)

diff -- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -20,9 +20,9 @@ Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <[email protected]>
Description: (RW) Used in conjunction with @addr_idx. Specifies
- characteristics about the address comparator being configure,
+ characteristics about the address comparator being configured,
for example the access type, the kind of instruction to trace,
- processor contect ID to trigger on, etc. Individual fields in
+ processor context ID to trigger on, etc. Individual fields in
the access type register may vary on the version of the trace
entity.

@@ -31,7 +31,7 @@ Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <[email protected]>
Description: (RW) Used in conjunction with @addr_idx. Specifies the range of
- addresses to trigger on. Inclusion or exclusion is specificed
+ addresses to trigger on. Inclusion or exclusion is specified
in the corresponding access type register.

What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_single
@@ -304,19 +304,19 @@ What: /sys/bus/coresight/devices/<memor
Date: September 2015
KernelVersion: 4.4
Contact: Mathieu Poirier <[email protected]>
-Description: (RO) Print the content of the ETM Trace Start/Stop Conrol
+Description: (RO) Print the content of the ETM Trace Start/Stop Control
register (0x018). The value is read directly from the HW.

What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr1
Date: September 2015
KernelVersion: 4.4
Contact: Mathieu Poirier <[email protected]>
-Description: (RO) Print the content of the ETM Enable Conrol #1
+Description: (RO) Print the content of the ETM Enable Control #1
register (0x024). The value is read directly from the HW.

What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr2
Date: September 2015
KernelVersion: 4.4
Contact: Mathieu Poirier <[email protected]>
-Description: (RO) Print the content of the ETM Enable Conrol #2
+Description: (RO) Print the content of the ETM Enable Control #2
register (0x01c). The value is read directly from the HW.


2023-07-10 16:05:40

by James Clark

[permalink] [raw]
Subject: Re: [PATCH] coresight: fix spelling in etm3x ABI documentation



On 10/07/2023 06:23, Randy Dunlap wrote:
> Correct spelling problems as identified by codespell.
> Correct one grammar error.
>
> Fixes: 7a25ec8e481e ("coresight: Adding ABI documentation")
> Fixes: 7253e4c95616 ("coresight: etm3x: breaking down sysFS status interface")
> Signed-off-by: Randy Dunlap <[email protected]>
> Cc: Suzuki K Poulose <[email protected]>
> Cc: Mike Leach <[email protected]>
> Cc: James Clark <[email protected]>
> Cc: Leo Yan <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: Mathieu Poirier <[email protected]>
> Cc: Greg Kroah-Hartman <[email protected]>
> ---
> Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x | 12 +++++-----
> 1 file changed, 6 insertions(+), 6 deletions(-)
>

Thanks for the fixes.

Reviewed-by: James Clark <[email protected]>

> diff -- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
> @@ -20,9 +20,9 @@ Date: November 2014
> KernelVersion: 3.19
> Contact: Mathieu Poirier <[email protected]>
> Description: (RW) Used in conjunction with @addr_idx. Specifies
> - characteristics about the address comparator being configure,
> + characteristics about the address comparator being configured,
> for example the access type, the kind of instruction to trace,
> - processor contect ID to trigger on, etc. Individual fields in
> + processor context ID to trigger on, etc. Individual fields in
> the access type register may vary on the version of the trace
> entity.
>
> @@ -31,7 +31,7 @@ Date: November 2014
> KernelVersion: 3.19
> Contact: Mathieu Poirier <[email protected]>
> Description: (RW) Used in conjunction with @addr_idx. Specifies the range of
> - addresses to trigger on. Inclusion or exclusion is specificed
> + addresses to trigger on. Inclusion or exclusion is specified
> in the corresponding access type register.
>
> What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_single
> @@ -304,19 +304,19 @@ What: /sys/bus/coresight/devices/<memor
> Date: September 2015
> KernelVersion: 4.4
> Contact: Mathieu Poirier <[email protected]>
> -Description: (RO) Print the content of the ETM Trace Start/Stop Conrol
> +Description: (RO) Print the content of the ETM Trace Start/Stop Control
> register (0x018). The value is read directly from the HW.
>
> What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr1
> Date: September 2015
> KernelVersion: 4.4
> Contact: Mathieu Poirier <[email protected]>
> -Description: (RO) Print the content of the ETM Enable Conrol #1
> +Description: (RO) Print the content of the ETM Enable Control #1
> register (0x024). The value is read directly from the HW.
>
> What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr2
> Date: September 2015
> KernelVersion: 4.4
> Contact: Mathieu Poirier <[email protected]>
> -Description: (RO) Print the content of the ETM Enable Conrol #2
> +Description: (RO) Print the content of the ETM Enable Control #2
> register (0x01c). The value is read directly from the HW.