Add reset-gpio, sx8654[056] and common of_touchscreen functions support
for the sx8654 driver.
Changes v2:
- use devm_gpiod_get_optional in probe instead of in #ifdef CONFIG_OF
- convert flags to BIT() in a separate patch
- replace hrtimer with "regular" timer
- use of_device_get_match_data instead of of_match_device
- add driver data to i2c_device_id table for non-DT fallback
- fix sequence of common touchscreen initialization
- div. minor stlye changes
Richard Leitner (8):
dt-bindings: input: touchscreen: sx8654: add reset-gpio property
Input: sx8654 - add reset-gpio support
dt-bindings: input: touchscreen: sx8654: add compatible models
Input: sx8654 - add sx8655 and sx8656 to compatibles
dt-bindings: input: touchscreen: sx8654: add sx8650 to comatibles
Input: sx8654 - add sx8650 support
Input: sx8654 - use common of_touchscreen functions
Input: sx8654 - convert #defined flags to BIT(x)
.../bindings/input/touchscreen/sx8654.txt | 10 +-
drivers/input/touchscreen/sx8654.c | 245 ++++++++++++++++++---
2 files changed, 229 insertions(+), 26 deletions(-)
--
2.11.0
As the sx8650 is quite similar to the sx8654 support for it will be
added in the driver. Therefore add it to the compatibles.
Signed-off-by: Richard Leitner <[email protected]>
---
Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index a538678424dd..0ebe6dd043c7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -2,6 +2,7 @@
Required properties:
- compatible: must be one of the following, depending on the model:
+ "semtech,sx8650"
"semtech,sx8654"
"semtech,sx8655"
"semtech,sx8656"
--
2.11.0
The sx8654 and sx8650 are quite similar, therefore add support for the
sx8650 within the sx8654 driver.
Signed-off-by: Richard Leitner <[email protected]>
---
drivers/input/touchscreen/sx8654.c | 193 +++++++++++++++++++++++++++++++++----
1 file changed, 173 insertions(+), 20 deletions(-)
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index afa4da138fe9..4939863efbef 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -29,7 +29,7 @@
#include <linux/input.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -44,9 +44,11 @@
#define I2C_REG_IRQSRC 0x23
#define I2C_REG_SOFTRESET 0x3f
+#define I2C_REG_SX8650_STAT 0x05
+#define SX8650_STAT_CONVIRQ 0x80
+
/* commands */
#define CMD_READ_REGISTER 0x40
-#define CMD_MANUAL 0xc0
#define CMD_PENTRG 0xe0
/* value for I2C_REG_SOFTRESET */
@@ -58,6 +60,7 @@
/* bits for RegTouch1 */
#define CONDIRQ 0x20
+#define RPDNT_100K 0x00
#define FILT_7SA 0x03
/* bits for I2C_REG_CHANMASK */
@@ -71,14 +74,122 @@
/* power delay: lower nibble of CTRL0 register */
#define POWDLY_1_1MS 0x0b
+/* for sx8650, as we have no pen release IRQ there: timeout in ns following the
+ * last PENIRQ after which we assume the pen is lifted.
+ */
+#define SX8650_PENIRQ_TIMEOUT msecs_to_jiffies(10)
+
#define MAX_12BIT ((1 << 12) - 1)
+#define MAX_I2C_READ_LEN 10 /* see datasheet section 5.1.5 */
+
+/* channel definition */
+#define CH_X 0x00
+#define CH_Y 0x01
+
+struct sx865x_data {
+ u8 cmd_manual;
+ u8 chan_mask;
+ u8 has_irq_penrelease;
+ u8 has_reg_irqmask;
+ irq_handler_t irqh;
+};
struct sx8654 {
struct input_dev *input;
struct i2c_client *client;
struct gpio_desc *gpio_reset;
+
+ spinlock_t lock; /* for input reporting from irq/timer */
+ struct timer_list timer;
+
+ const struct sx865x_data *data;
};
+static inline void sx865x_penrelease(struct sx8654 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_sync(input_dev);
+}
+
+static void sx865x_penrelease_timer_handler(struct timer_list *t)
+{
+ struct sx8654 *ts = from_timer(ts, t, timer);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ts->lock, flags);
+ sx865x_penrelease(ts);
+ spin_unlock_irqrestore(&ts->lock, flags);
+ dev_dbg(&ts->client->dev, "penrelease by timer\n");
+}
+
+static irqreturn_t sx8650_irq(int irq, void *handle)
+{
+ struct sx8654 *ts = handle;
+ struct device *dev = &ts->client->dev;
+ int len, i;
+ unsigned long flags;
+ u8 stat;
+ u16 x, y;
+ u8 data[MAX_I2C_READ_LEN];
+ u16 ch;
+ u16 chdata;
+ u8 readlen = hweight32(ts->data->chan_mask) * 2;
+
+ stat = i2c_smbus_read_byte_data(ts->client, CMD_READ_REGISTER
+ | I2C_REG_SX8650_STAT);
+
+ if (!(stat & SX8650_STAT_CONVIRQ)) {
+ dev_dbg(dev, "%s ignore stat [0x%02x]", __func__, stat);
+ return IRQ_HANDLED;
+ }
+
+ len = i2c_master_recv(ts->client, data, readlen);
+ if (len != readlen) {
+ dev_dbg(dev, "ignore short recv (%d)\n", len);
+ return IRQ_HANDLED;
+ }
+
+ spin_lock_irqsave(&ts->lock, flags);
+
+ x = 0;
+ y = 0;
+ for (i = 0; (i + 1) < len; i++) {
+ chdata = data[i] << 8;
+ i++;
+ chdata += data[i];
+
+ if (unlikely(chdata == 0xFFFF)) {
+ dev_dbg(dev, "invalid qualified data @ %d\n", i);
+ continue;
+ } else if (unlikely(chdata & 0x8000)) {
+ dev_warn(dev, "hibit @ %d [0x%04x]\n", i, chdata);
+ continue;
+ }
+
+ ch = chdata >> 12;
+ if (ch == CH_X)
+ x = chdata & MAX_12BIT;
+ else if (ch == CH_Y)
+ y = chdata & MAX_12BIT;
+ else
+ dev_warn(dev, "unknown channel %d [0x%04x]\n", ch,
+ chdata);
+ }
+
+ input_report_abs(ts->input, ABS_X, x);
+ input_report_abs(ts->input, ABS_Y, y);
+ input_report_key(ts->input, BTN_TOUCH, 1);
+ input_sync(ts->input);
+ dev_dbg(dev, "point(%4d,%4d)\n", x, y);
+
+ mod_timer(&ts->timer, jiffies + SX8650_PENIRQ_TIMEOUT);
+ spin_unlock_irqrestore(&ts->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t sx8654_irq(int irq, void *handle)
{
struct sx8654 *sx8654 = handle;
@@ -127,6 +238,22 @@ static irqreturn_t sx8654_irq(int irq, void *handle)
return IRQ_HANDLED;
}
+static const struct sx865x_data sx8650_data = {
+ .cmd_manual = 0xb0,
+ .has_irq_penrelease = 0,
+ .has_reg_irqmask = 0,
+ .chan_mask = (CONV_X | CONV_Y),
+ .irqh = sx8650_irq,
+};
+
+static const struct sx865x_data sx8654_data = {
+ .cmd_manual = 0xc0,
+ .has_irq_penrelease = 1,
+ .has_reg_irqmask = 1,
+ .chan_mask = (CONV_X | CONV_Y),
+ .irqh = sx8654_irq,
+};
+
static int sx8654_reset(struct sx8654 *ts)
{
int err;
@@ -182,13 +309,13 @@ static void sx8654_close(struct input_dev *dev)
disable_irq(client->irq);
/* enable manual mode mode */
- error = i2c_smbus_write_byte(client, CMD_MANUAL);
+ error = i2c_smbus_write_byte(client, sx8654->data->cmd_manual);
if (error) {
dev_err(&client->dev, "writing command CMD_MANUAL failed");
return;
}
- error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
+ error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, RATE_MANUAL);
if (error) {
dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
return;
@@ -221,6 +348,20 @@ static int sx8654_probe(struct i2c_client *client,
}
dev_dbg(&client->dev, "got GPIO reset pin\n");
+ sx8654->data = of_device_get_match_data(&client->dev);
+ if (!sx8654->data)
+ sx8654->data = (const struct sx865x_data *)id->driver_data;
+ if (!sx8654->data) {
+ dev_err(&client->dev, "invalid or missing device data\n");
+ return -EINVAL;
+ }
+
+ if (!sx8654->data->has_irq_penrelease) {
+ dev_dbg(&client->dev, "use timer for penrelease\n");
+ timer_setup(&sx8654->timer, sx865x_penrelease_timer_handler, 0);
+ spin_lock_init(&sx8654->lock);
+ }
+
input = devm_input_allocate_device(&client->dev);
if (!input)
return -ENOMEM;
@@ -248,29 +389,31 @@ static int sx8654_probe(struct i2c_client *client,
}
error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
- CONV_X | CONV_Y);
+ sx8654->data->chan_mask);
if (error) {
dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
return error;
}
- error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
- IRQ_PENTOUCH_TOUCHCONVDONE |
- IRQ_PENRELEASE);
- if (error) {
- dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
- return error;
+ if (sx8654->data->has_reg_irqmask) {
+ error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
+ IRQ_PENTOUCH_TOUCHCONVDONE |
+ IRQ_PENRELEASE);
+ if (error) {
+ dev_err(&client->dev, "writing I2C_REG_IRQMASK failed");
+ return error;
+ }
}
error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
- CONDIRQ | FILT_7SA);
+ CONDIRQ | RPDNT_100K | FILT_7SA);
if (error) {
dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
return error;
}
error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, sx8654_irq,
+ NULL, sx8654->data->irqh,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, sx8654);
if (error) {
@@ -292,18 +435,28 @@ static int sx8654_probe(struct i2c_client *client,
#ifdef CONFIG_OF
static const struct of_device_id sx8654_of_match[] = {
- { .compatible = "semtech,sx8654", },
- { .compatible = "semtech,sx8655", },
- { .compatible = "semtech,sx8656", },
- { },
+ {
+ .compatible = "semtech,sx8650",
+ .data = &sx8650_data,
+ }, {
+ .compatible = "semtech,sx8654",
+ .data = &sx8654_data,
+ }, {
+ .compatible = "semtech,sx8655",
+ .data = &sx8654_data,
+ }, {
+ .compatible = "semtech,sx8656",
+ .data = &sx8654_data,
+ }, {},
};
MODULE_DEVICE_TABLE(of, sx8654_of_match);
#endif
static const struct i2c_device_id sx8654_id_table[] = {
- { "semtech_sx8654", 0 },
- { "semtech_sx8655", 0 },
- { "semtech_sx8656", 0 },
+ { .name = "semtech_sx8650", .driver_data = (long)&sx8650_data },
+ { .name = "semtech_sx8654", .driver_data = (long)&sx8654_data },
+ { .name = "semtech_sx8655", .driver_data = (long)&sx8654_data },
+ { .name = "semtech_sx8656", .driver_data = (long)&sx8654_data },
{ },
};
MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
--
2.11.0
of_touchscreen.c provides a common interface for a axis invertion and
swapping of touchscreens. Therefore use it in the sx8654 driver.
Signed-off-by: Richard Leitner <[email protected]>
---
drivers/input/touchscreen/sx8654.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index 4939863efbef..b7b263ed52af 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -35,6 +35,7 @@
#include <linux/irq.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
+#include <linux/input/touchscreen.h>
/* register addresses */
#define I2C_REG_TOUCH0 0x00
@@ -101,6 +102,7 @@ struct sx8654 {
spinlock_t lock; /* for input reporting from irq/timer */
struct timer_list timer;
+ struct touchscreen_properties props;
const struct sx865x_data *data;
};
@@ -178,8 +180,7 @@ static irqreturn_t sx8650_irq(int irq, void *handle)
chdata);
}
- input_report_abs(ts->input, ABS_X, x);
- input_report_abs(ts->input, ABS_Y, y);
+ touchscreen_report_pos(ts->input, &ts->props, x, y, false);
input_report_key(ts->input, BTN_TOUCH, 1);
input_sync(ts->input);
dev_dbg(dev, "point(%4d,%4d)\n", x, y);
@@ -226,8 +227,8 @@ static irqreturn_t sx8654_irq(int irq, void *handle)
x = ((data[0] & 0xf) << 8) | (data[1]);
y = ((data[2] & 0xf) << 8) | (data[3]);
- input_report_abs(sx8654->input, ABS_X, x);
- input_report_abs(sx8654->input, ABS_Y, y);
+ touchscreen_report_pos(sx8654->input, &sx8654->props, x, y,
+ false);
input_report_key(sx8654->input, BTN_TOUCH, 1);
input_sync(sx8654->input);
@@ -377,6 +378,8 @@ static int sx8654_probe(struct i2c_client *client,
input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
+ touchscreen_parse_properties(input, false, &sx8654->props);
+
sx8654->client = client;
sx8654->input = input;
--
2.11.0
Some of the #defined register values are one-bit flags. Convert them to
use the BIT(x) macro instead of 1 byte hexadecimal values. This improves
readability and clarifies the intent.
Signed-off-by: Richard Leitner <[email protected]>
---
drivers/input/touchscreen/sx8654.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index b7b263ed52af..3746ea855f94 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -36,6 +36,7 @@
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/input/touchscreen.h>
+#include <linux/bitops.h>
/* register addresses */
#define I2C_REG_TOUCH0 0x00
@@ -46,7 +47,7 @@
#define I2C_REG_SOFTRESET 0x3f
#define I2C_REG_SX8650_STAT 0x05
-#define SX8650_STAT_CONVIRQ 0x80
+#define SX8650_STAT_CONVIRQ BIT(7)
/* commands */
#define CMD_READ_REGISTER 0x40
@@ -56,8 +57,8 @@
#define SOFTRESET_VALUE 0xde
/* bits for I2C_REG_IRQSRC */
-#define IRQ_PENTOUCH_TOUCHCONVDONE 0x08
-#define IRQ_PENRELEASE 0x04
+#define IRQ_PENTOUCH_TOUCHCONVDONE BIT(7)
+#define IRQ_PENRELEASE BIT(6)
/* bits for RegTouch1 */
#define CONDIRQ 0x20
@@ -65,8 +66,8 @@
#define FILT_7SA 0x03
/* bits for I2C_REG_CHANMASK */
-#define CONV_X 0x80
-#define CONV_Y 0x40
+#define CONV_X BIT(7)
+#define CONV_Y BIT(6)
/* coordinates rate: higher nibble of CTRL0 register */
#define RATE_MANUAL 0x00
--
2.11.0
The sx8654 features a NRST input which may be connected to a GPIO.
Therefore add support for hard-resetting the sx8654 via this NRST.
If the reset-gpio property is provided the sx8654 is resetted via NRST
instead of the soft-reset via I2C.
Signed-off-by: Richard Leitner <[email protected]>
---
drivers/input/touchscreen/sx8654.c | 40 +++++++++++++++++++++++++++++++++++---
1 file changed, 37 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index ed29db3ec731..238f56b1581b 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -33,6 +33,8 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
/* register addresses */
#define I2C_REG_TOUCH0 0x00
@@ -74,6 +76,7 @@
struct sx8654 {
struct input_dev *input;
struct i2c_client *client;
+ struct gpio_desc *gpio_reset;
};
static irqreturn_t sx8654_irq(int irq, void *handle)
@@ -124,6 +127,27 @@ static irqreturn_t sx8654_irq(int irq, void *handle)
return IRQ_HANDLED;
}
+static int sx8654_reset(struct sx8654 *ts)
+{
+ int err;
+
+ if (ts->gpio_reset) {
+ gpiod_set_value_cansleep(ts->gpio_reset, 1);
+ udelay(2); /* Tpulse > 1µs */
+ gpiod_set_value_cansleep(ts->gpio_reset, 0);
+
+ return 0;
+ }
+
+ dev_dbg(&ts->client->dev, "NRST unavailable, try softreset\n");
+ err = i2c_smbus_write_byte_data(ts->client, I2C_REG_SOFTRESET,
+ SOFTRESET_VALUE);
+ if (err)
+ return err;
+ else
+ return 0;
+}
+
static int sx8654_open(struct input_dev *dev)
{
struct sx8654 *sx8654 = input_get_drvdata(dev);
@@ -186,6 +210,17 @@ static int sx8654_probe(struct i2c_client *client,
if (!sx8654)
return -ENOMEM;
+ sx8654->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(sx8654->gpio_reset)) {
+ error = PTR_ERR(sx8654->gpio_reset);
+ if (error != -EPROBE_DEFER)
+ dev_err(&client->dev, "unable to get reset-gpio: %d\n",
+ error);
+ return error;
+ }
+ dev_dbg(&client->dev, "got GPIO reset pin\n");
+
input = devm_input_allocate_device(&client->dev);
if (!input)
return -ENOMEM;
@@ -206,10 +241,9 @@ static int sx8654_probe(struct i2c_client *client,
input_set_drvdata(sx8654->input, sx8654);
- error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
- SOFTRESET_VALUE);
+ error = sx8654_reset(sx8654);
if (error) {
- dev_err(&client->dev, "writing softreset value failed");
+ dev_err(&client->dev, "reset failed");
return error;
}
--
2.11.0
As the sx865[456] share the same datasheet and differ only in the
presence of a "capacitive proximity detection circuit" and a "haptics
motor driver for LRA/ERM" add them to the compatbiles. As the driver
doesn't implement these features it should be no problem.
Signed-off-by: Richard Leitner <[email protected]>
---
Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index ca521d8f7d65..a538678424dd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -1,7 +1,10 @@
* Semtech SX8654 I2C Touchscreen Controller
Required properties:
-- compatible: must be "semtech,sx8654"
+- compatible: must be one of the following, depending on the model:
+ "semtech,sx8654"
+ "semtech,sx8655"
+ "semtech,sx8656"
- reg: i2c slave address
- interrupts: touch controller interrupt
--
2.11.0
As the sx865[456] share the same datasheet and differ only in the
presence of a "capacitive proximity detection circuit" and a "haptics
motor driver for LRA/ERM" add them to the compatbiles. As the driver
doesn't implement these features it should be no problem.
Signed-off-by: Richard Leitner <[email protected]>
---
drivers/input/touchscreen/sx8654.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index 238f56b1581b..afa4da138fe9 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -293,6 +293,8 @@ static int sx8654_probe(struct i2c_client *client,
#ifdef CONFIG_OF
static const struct of_device_id sx8654_of_match[] = {
{ .compatible = "semtech,sx8654", },
+ { .compatible = "semtech,sx8655", },
+ { .compatible = "semtech,sx8656", },
{ },
};
MODULE_DEVICE_TABLE(of, sx8654_of_match);
@@ -300,6 +302,8 @@ MODULE_DEVICE_TABLE(of, sx8654_of_match);
static const struct i2c_device_id sx8654_id_table[] = {
{ "semtech_sx8654", 0 },
+ { "semtech_sx8655", 0 },
+ { "semtech_sx8656", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
--
2.11.0
Document the reset-gpio property for the sx8654 touchscreen controller
driver.
Signed-off-by: Richard Leitner <[email protected]>
---
Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 4886c4aa2906..ca521d8f7d65 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -5,6 +5,9 @@ Required properties:
- reg: i2c slave address
- interrupts: touch controller interrupt
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
Example:
sx8654@48 {
@@ -12,4 +15,5 @@ Example:
reg = <0x48>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
};
--
2.11.0
On Wed, 17 Oct 2018 14:51:09 +0200, Richard Leitner wrote:
> Document the reset-gpio property for the sx8654 touchscreen controller
> driver.
>
> Signed-off-by: Richard Leitner <[email protected]>
> ---
> Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
Reviewed-by: Rob Herring <[email protected]>
On Wed, 17 Oct 2018 14:51:11 +0200, Richard Leitner wrote:
> As the sx865[456] share the same datasheet and differ only in the
> presence of a "capacitive proximity detection circuit" and a "haptics
> motor driver for LRA/ERM" add them to the compatbiles. As the driver
> doesn't implement these features it should be no problem.
>
> Signed-off-by: Richard Leitner <[email protected]>
> ---
> Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <[email protected]>
On Wed, 17 Oct 2018 14:51:13 +0200, Richard Leitner wrote:
> As the sx8650 is quite similar to the sx8654 support for it will be
> added in the driver. Therefore add it to the compatibles.
>
> Signed-off-by: Richard Leitner <[email protected]>
> ---
> Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Rob Herring <[email protected]>
Hi,
friendly question for the status of this patchset of mine.
thanks®ards;Richard.L
On 10/17/18 2:51 PM, Richard Leitner wrote:
> Add reset-gpio, sx8654[056] and common of_touchscreen functions support
> for the sx8654 driver.
>
> Changes v2:
> - use devm_gpiod_get_optional in probe instead of in #ifdef CONFIG_OF
> - convert flags to BIT() in a separate patch
> - replace hrtimer with "regular" timer
> - use of_device_get_match_data instead of of_match_device
> - add driver data to i2c_device_id table for non-DT fallback
> - fix sequence of common touchscreen initialization
> - div. minor stlye changes
>
> Richard Leitner (8):
> dt-bindings: input: touchscreen: sx8654: add reset-gpio property
> Input: sx8654 - add reset-gpio support
> dt-bindings: input: touchscreen: sx8654: add compatible models
> Input: sx8654 - add sx8655 and sx8656 to compatibles
> dt-bindings: input: touchscreen: sx8654: add sx8650 to comatibles
> Input: sx8654 - add sx8650 support
> Input: sx8654 - use common of_touchscreen functions
> Input: sx8654 - convert #defined flags to BIT(x)
>
> .../bindings/input/touchscreen/sx8654.txt | 10 +-
> drivers/input/touchscreen/sx8654.c | 245 ++++++++++++++++++---
> 2 files changed, 229 insertions(+), 26 deletions(-)
>
Hi,
another friendly reminder for this patchset...
Any comments/objections?
regards;Richard.L
On 17.10.18 14:51, Richard Leitner wrote:
> Add reset-gpio, sx8654[056] and common of_touchscreen functions support
> for the sx8654 driver.
>
> Changes v2:
> - use devm_gpiod_get_optional in probe instead of in #ifdef CONFIG_OF
> - convert flags to BIT() in a separate patch
> - replace hrtimer with "regular" timer
> - use of_device_get_match_data instead of of_match_device
> - add driver data to i2c_device_id table for non-DT fallback
> - fix sequence of common touchscreen initialization
> - div. minor stlye changes
>
> Richard Leitner (8):
> dt-bindings: input: touchscreen: sx8654: add reset-gpio property
> Input: sx8654 - add reset-gpio support
> dt-bindings: input: touchscreen: sx8654: add compatible models
> Input: sx8654 - add sx8655 and sx8656 to compatibles
> dt-bindings: input: touchscreen: sx8654: add sx8650 to comatibles
> Input: sx8654 - add sx8650 support
> Input: sx8654 - use common of_touchscreen functions
> Input: sx8654 - convert #defined flags to BIT(x)
>
> .../bindings/input/touchscreen/sx8654.txt | 10 +-
> drivers/input/touchscreen/sx8654.c | 245 ++++++++++++++++++---
> 2 files changed, 229 insertions(+), 26 deletions(-)
>