Add device node for RPMH and Global clock controller on Qualcomm
SM4450 platform.
Signed-off-by: Ajit Pandey <[email protected]>
Signed-off-by: Tengfei Fan <[email protected]>
---
arch/arm64/boot/dts/qcom/sm4450.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
index 3d9d3b5e9510..c27f17a41699 100644
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -3,6 +3,8 @@
* Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -348,6 +350,20 @@
dma-ranges = <0 0 0 0 0x10 0>;
compatible = "simple-bus";
+ gcc: clock-controller@100000 {
+ compatible = "qcom,sm4450-gcc";
+ reg = <0x0 0x00100000 0x0 0x1f4200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -452,6 +468,13 @@
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm4450-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
};
};
--
2.17.1
On 9/20/23 08:54, Tengfei Fan wrote:
> Add device node for RPMH and Global clock controller on Qualcomm
> SM4450 platform.
>
> Signed-off-by: Ajit Pandey <[email protected]>
> Signed-off-by: Tengfei Fan <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sm4450.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> index 3d9d3b5e9510..c27f17a41699 100644
> --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> @@ -3,6 +3,8 @@
> * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/clock/qcom,sm4450-gcc.h>
These should be sorted alphabetically.
[...]
> + rpmhcc: clock-controller {
> + compatible = "qcom,sm4450-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
property
property-names
Konrad
在 9/20/2023 6:00 PM, Konrad Dybcio 写道:
>
>
> On 9/20/23 08:54, Tengfei Fan wrote:
>> Add device node for RPMH and Global clock controller on Qualcomm
>> SM4450 platform.
>>
>> Signed-off-by: Ajit Pandey <[email protected]>
>> Signed-off-by: Tengfei Fan <[email protected]>
>> ---
>> arch/arm64/boot/dts/qcom/sm4450.dtsi | 23 +++++++++++++++++++++++
>> 1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi
>> b/arch/arm64/boot/dts/qcom/sm4450.dtsi
>> index 3d9d3b5e9510..c27f17a41699 100644
>> --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
>> @@ -3,6 +3,8 @@
>> * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights
>> reserved.
>> */
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/clock/qcom,sm4450-gcc.h>
> These should be sorted alphabetically.Yes, I will sort these alphabetically.
>
> [...]
>
>> + rpmhcc: clock-controller {
>> + compatible = "qcom,sm4450-rpmh-clk";
>> + #clock-cells = <1>;
>> + clock-names = "xo";
>> + clocks = <&xo_board>;
> property
> property-names
>
> Konrad
Hi Konrad,
Sure, I will adjust these noeds.
--
Thx and BRs,
Tengfei Fan
在 9/20/2023 6:00 PM, Konrad Dybcio 写道:
>
>
> On 9/20/23 08:54, Tengfei Fan wrote:
>> Add device node for RPMH and Global clock controller on Qualcomm
>> SM4450 platform.
>>
>> Signed-off-by: Ajit Pandey <[email protected]>
>> Signed-off-by: Tengfei Fan <[email protected]>
>> ---
>> arch/arm64/boot/dts/qcom/sm4450.dtsi | 23 +++++++++++++++++++++++
>> 1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi
>> b/arch/arm64/boot/dts/qcom/sm4450.dtsi
>> index 3d9d3b5e9510..c27f17a41699 100644
>> --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
>> @@ -3,6 +3,8 @@
>> * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights
>> reserved.
>> */
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/clock/qcom,sm4450-gcc.h>
> These should be sorted alphabetically.
>
Hi Konrad,
I think these included header files already were sorted alphabetically(r
-> s), so there are unnecessary for adjust them again, right?
> [...]
>
>> + rpmhcc: clock-controller {
>> + compatible = "qcom,sm4450-rpmh-clk";
>> + #clock-cells = <1>;
>> + clock-names = "xo";
>> + clocks = <&xo_board>;
> property
> property-names
>
> Konrad
--
Thx and BRs,
Tengfei Fan