Hi,
I am having trouble with the 2.6.23 kernel. With all versions since
2.6.23-rc1 I have trouble with my network connection. When using the
network over a certain level (just browsing the web seems not to be
enough) e.g. when installing packages over the nvsv4 share, all
network stuff freezes for some time and syslog tells me:
Aug 13 13:16:09 frege NETDEV WATCHDOG: eth0: transmit timed out
Aug 13 13:16:39 frege NETDEV WATCHDOG: eth0: transmit timed out
Aug 13 13:17:09 frege NETDEV WATCHDOG: eth0: transmit timed out
Aug 13 13:17:57 frege NETDEV WATCHDOG: eth0: transmit timed out
Some info about my system:
/usr/src/linux-2.6.23-rc3 $ sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux frege linux-2.6.23-rc3 #1 SMP PREEMPT Sat Aug 11 16:24:26 CEST
2007 i686 Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz GenuineIntel
GNU/Linux
Gnu C 4.2.0
Gnu make 3.81
binutils 2.17
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.39
Linux C Library 2.5
Dynamic linker (ldd) 2.5
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
Sh-utils 6.9
udev 114
Modules Loaded nvidia
lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
945GT Express Memory Controller Hub (rev 03)
Subsystem: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express Memory Controller Hub
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f8500000-fe5fffff
Prefetchable memory behind bridge: 00000000cff00000-00000000efefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] Subsystem: Intel Corporation Mobile
945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 1
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 2
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 01) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 8, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 4
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI #1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at ec00 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI #2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e880 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI #3
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI #4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e480 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
(prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
Serial ATA Storage Controller IDE (rev 01) (prog-if 80 [Master])
Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA
Storage Controller IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 4
Region 4: I/O ports at 0400 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation Unknown device
0402 (rev a1) (prog-if 00 [VGA])
Subsystem: Giga-byte Technology Unknown device 3447
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at ac00 [size=128]
[virtual] Expansion ROM at fe5e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <512ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Unknown
device 8168 (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Unknown device 8168
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b800 [size=256]
Region 2: Memory at fe6ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe6c0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express Endpoint IRQ 0
Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <1us, L1 unlimited
Device: AtnBtn+ AtnInd+ PwrInd+
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [84] Vendor Specific Information
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Unknown
device 8168 (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Unknown device 8168
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at fe7ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe7c0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express Endpoint IRQ 0
Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <1us, L1 unlimited
Device: AtnBtn+ AtnInd+ PwrInd+
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [84] Vendor Specific Information
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Unknown
device 8168 (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Unknown device 8168
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fe8ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express Endpoint IRQ 0
Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <1us, L1 unlimited
Device: AtnBtn+ AtnInd+ PwrInd+
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [84] Vendor Specific Information
05:00.0 Ethernet controller: Atheros Communications, Inc. Unknown
device 001c (rev 01)
Subsystem: Giga-byte Technology Unknown device e913
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 4
Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [60] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <128ns, L1 <2us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <64us
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=0 offset=00000000
PBA: BAR=0 offset=00000000
06:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Texas Instruments Unknown device 8019
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
(netdev Cced)
Karl Meyer <[email protected]> :
[...]
> I am having trouble with the 2.6.23 kernel. With all versions since
> 2.6.23-rc1 I have trouble with my network connection. When using the
> network over a certain level (just browsing the web seems not to be
> enough) e.g. when installing packages over the nvsv4 share, all
> network stuff freezes for some time and syslog tells me:
> Aug 13 13:16:09 frege NETDEV WATCHDOG: eth0: transmit timed out
> Aug 13 13:16:39 frege NETDEV WATCHDOG: eth0: transmit timed out
> Aug 13 13:17:09 frege NETDEV WATCHDOG: eth0: transmit timed out
> Aug 13 13:17:57 frege NETDEV WATCHDOG: eth0: transmit timed out
Can you:
- send a complete dmesg + /proc/interrupts + .config
- use git bisect to find a suspect changeset
I do not expect any change of behavior between 2.6.22 and
25805dcf9d83098cf5492117ad2669cd14cc9b24 if it can help you narrow
things down (assuming it is a r8169 regression).
--
Ueimor
Hi,
dmesg, interrupts and .config are attached. I will have a look at git bisect.
2007/8/13, Francois Romieu <[email protected]>:
> (netdev Cced)
>
> Karl Meyer <[email protected]> :
> [...]
> > I am having trouble with the 2.6.23 kernel. With all versions since
> > 2.6.23-rc1 I have trouble with my network connection. When using the
> > network over a certain level (just browsing the web seems not to be
> > enough) e.g. when installing packages over the nvsv4 share, all
> > network stuff freezes for some time and syslog tells me:
> > Aug 13 13:16:09 frege NETDEV WATCHDOG: eth0: transmit timed out
> > Aug 13 13:16:39 frege NETDEV WATCHDOG: eth0: transmit timed out
> > Aug 13 13:17:09 frege NETDEV WATCHDOG: eth0: transmit timed out
> > Aug 13 13:17:57 frege NETDEV WATCHDOG: eth0: transmit timed out
>
> Can you:
> - send a complete dmesg + /proc/interrupts + .config
> - use git bisect to find a suspect changeset
> I do not expect any change of behavior between 2.6.22 and
> 25805dcf9d83098cf5492117ad2669cd14cc9b24 if it can help you narrow
> things down (assuming it is a r8169 regression).
>
> --
> Ueimor
>
Karl Meyer <[email protected]> :
[...]
> dmesg, interrupts and .config are attached. I will have a look at git bisect.
Can you reproduce the problem when nvidia binary-only stuff is not loaded
after boot ?
--
Ueimor
Hi,
I successfully ran git bisect:
0127215c17414322b350c3c6fbd1a7d8dd13856f is first bad commit
commit 0127215c17414322b350c3c6fbd1a7d8dd13856f
Author: Francois Romieu <[email protected]>
Date: Tue Feb 20 22:58:51 2007 +0100
r8169: small 8101 comment
Extracted from version 1.001.00 of Realtek's r8101.
Signed-off-by: Francois Romieu <[email protected]>
Cc: Edward Hsu <[email protected]>
:040000 040000 07dc911509e8d1b4ff2dfb013401108d4be85095
d41a52a215fb1b38ba652dda90faf6ed951bccd1 M drivers
I did proof it by doing "git revert
0127215c17414322b350c3c6fbd1a7d8dd13856f" on my git clone, now I am
happily running 2.6.23-rc3-ge60a without the NETDEV WATCHDOG message.
2007/8/14, Francois Romieu <[email protected]>:
> Karl Meyer <[email protected]> :
> [...]
> > dmesg, interrupts and .config are attached. I will have a look at git bisect.
>
> Can you reproduce the problem when nvidia binary-only stuff is not loaded
> after boot ?
>
> --
> Ueimor
>
Sorry, I was wrong, still testing....
2007/8/14, Francois Romieu <[email protected]>:
> Karl Meyer <[email protected]> :
> [...]
> > dmesg, interrupts and .config are attached. I will have a look at git bisect.
>
> Can you reproduce the problem when nvidia binary-only stuff is not loaded
> after boot ?
>
> --
> Ueimor
>
I did some additional testing, the results are:
[0e4851502f846b13b29b7f88f1250c980d57e944] r8169: merge with version
8.001.00 of Realtek's r8168 driver
does not work, I after some traffic the transmit timeout occurs.
[6dccd16b7c2703e8bbf8bca62b5cf248332afbe2] r8169: merge with version
6.001.00 of Realtek's r8169 driver
Seems to be the last version to work. I did some stress testing (much
more than the level that was enough to make
[0e4851502f846b13b29b7f88f1250c980d57e944] break) and am currently
using this version and no problems so far.
2007/8/14, Francois Romieu <[email protected]>:
> Karl Meyer <[email protected]> :
> [...]
> > dmesg, interrupts and .config are attached. I will have a look at git bisect.
>
> Can you reproduce the problem when nvidia binary-only stuff is not loaded
> after boot ?
>
> --
> Ueimor
>
Karl Meyer <[email protected]> :
> I did some additional testing, the results are:
> [0e4851502f846b13b29b7f88f1250c980d57e944] r8169: merge with version
> 8.001.00 of Realtek's r8168 driver
> does not work, I after some traffic the transmit timeout occurs.
> [6dccd16b7c2703e8bbf8bca62b5cf248332afbe2] r8169: merge with version
> 6.001.00 of Realtek's r8169 driver
> Seems to be the last version to work. I did some stress testing (much
> more than the level that was enough to make
> [0e4851502f846b13b29b7f88f1250c980d57e944] break) and am currently
> using this version and no problems so far.
Thanks for the quick feedback.
Can you try the patch below on top of 2.6.23-rc3 ?
If it does not work I'll dissect 0e4851502f846b13b29b7f88f1250c980d57e944
tomorrow.
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b85ab4a..cdb8a08 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2749,6 +2749,7 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
if (!(status & tp->intr_event))
break;
+#if 0
/* Work around for rx fifo overflow */
if (unlikely(status & RxFIFOOver) &&
(tp->mac_version == RTL_GIGA_MAC_VER_11)) {
@@ -2756,6 +2757,7 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
rtl8169_tx_timeout(dev);
break;
}
+#endif
if (unlikely(status & SYSErr)) {
rtl8169_pcierr_interrupt(dev);
--
Ueimor
(please do not remove the netdev Cc:)
Francois Romieu <[email protected]> :
[...]
> If it does not work I'll dissect 0e4851502f846b13b29b7f88f1250c980d57e944
> tomorrow.
You will find a tgz archive in attachment which contains a serie of patches
(0001-... to 0005-...) to walk from 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2
to 0e4851502f846b13b29b7f88f1250c980d57e944 in smaller steps.
Please apply 0001 on top of 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2. If it
still works, apply 0002 on top of 0001, etc.
--
Ueimor
I did some testing today and found that the error occurs after
applying some of the patches. However I did not figure out the exact
patch in which the error "starts" since it sometimes occurs immediatly
when moving some data over the net and sometimes it takes 30 min till
I get the transmit timeout. I will be away till sunday and do some
more testing then.
2007/8/16, Francois Romieu <[email protected]>:
> (please do not remove the netdev Cc:)
>
> Francois Romieu <[email protected]> :
> [...]
> > If it does not work I'll dissect 0e4851502f846b13b29b7f88f1250c980d57e944
> > tomorrow.
>
> You will find a tgz archive in attachment which contains a serie of patches
> (0001-... to 0005-...) to walk from 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2
> to 0e4851502f846b13b29b7f88f1250c980d57e944 in smaller steps.
>
> Please apply 0001 on top of 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2. If it
> still works, apply 0002 on top of 0001, etc.
>
> --
> Ueimor
>
>
The error exists from patch 2 on. I did some network testing with
patch 1 and currently use it and have no errors so far.
>From my experiences up to now patch 1 should be error free.
2007/8/16, Francois Romieu <[email protected]>:
> (please do not remove the netdev Cc:)
>
> Francois Romieu <[email protected]> :
> [...]
> > If it does not work I'll dissect 0e4851502f846b13b29b7f88f1250c980d57e944
> > tomorrow.
>
> You will find a tgz archive in attachment which contains a serie of patches
> (0001-... to 0005-...) to walk from 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2
> to 0e4851502f846b13b29b7f88f1250c980d57e944 in smaller steps.
>
> Please apply 0001 on top of 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2. If it
> still works, apply 0002 on top of 0001, etc.
>
> --
> Ueimor
>
>
fyi:
I do not know whether it is related to the problem, but since using
the version you told me there are these entries is my log:
frege Hangcheck: hangcheck value past margin!
frege Hangcheck: hangcheck value past margin!
frege Hangcheck: hangcheck value past margin!
2007/8/16, Francois Romieu <[email protected]>:
> (please do not remove the netdev Cc:)
>
> Francois Romieu <[email protected]> :
> [...]
> > If it does not work I'll dissect 0e4851502f846b13b29b7f88f1250c980d57e944
> > tomorrow.
>
> You will find a tgz archive in attachment which contains a serie of patches
> (0001-... to 0005-...) to walk from 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2
> to 0e4851502f846b13b29b7f88f1250c980d57e944 in smaller steps.
>
> Please apply 0001 on top of 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2. If it
> still works, apply 0002 on top of 0001, etc.
>
> --
> Ueimor
>
>
On 21-08-2007 12:56, Karl Meyer wrote:
> fyi:
> I do not know whether it is related to the problem, but since using
> the version you told me there are these entries is my log:
> frege Hangcheck: hangcheck value past margin!
...
BTW, I don't know wheter it's related too, but I think you should try
first to get rid of these errors:
> Freeing unused kernel memory: 220k freed
> usb_id[1320]: segfault at 00000000 eip b7e25db2 esp bfd1d734 error 4
> usb_id[1329]: segfault at 00000000 eip b7e1bdb2 esp bf9c9224 error 4
> usb_id[1322]: segfault at 00000000 eip b7df3db2 esp bfcb66c4 error 4
> usb_id[1321]: segfault at 00000000 eip b7e11db2 esp bf8f4b04 error 4
Regards,
Jarek P.
This is what happened today:
Sep 1 21:08:01 frege NETDEV WATCHDOG: eth0: transmit timed out
frege ~ # uname -r
2.6.22.5-cfs-v20.5
2007/8/16, Francois Romieu <[email protected]>:
> (please do not remove the netdev Cc:)
>
> Francois Romieu <[email protected]> :
> [...]
> > If it does not work I'll dissect 0e4851502f846b13b29b7f88f1250c980d57e944
> > tomorrow.
>
> You will find a tgz archive in attachment which contains a serie of patches
> (0001-... to 0005-...) to walk from 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2
> to 0e4851502f846b13b29b7f88f1250c980d57e944 in smaller steps.
>
> Please apply 0001 on top of 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2. If it
> still works, apply 0002 on top of 0001, etc.
>
> --
> Ueimor
>
>
Hi,
On 01/09/07, Karl Meyer <[email protected]> wrote:
> This is what happened today:
>
> Sep 1 21:08:01 frege NETDEV WATCHDOG: eth0: transmit timed out
> frege ~ # uname -r
> 2.6.22.5-cfs-v20.5
Can you reproduce this on 2.6.22 (not 2.6.22.x - it might be a -stable
regression)?
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
Hi,
am am looking for this issue for some time now, but there where no
errors in 2.6.22-r2 (gentoo speak, I guess this is 2.6.22.2
officially), I also ran git-bisect (for more information see the older
messages in this thread).
2007/9/3, Michal Piotrowski <[email protected]>:
> Hi,
>
> On 01/09/07, Karl Meyer <[email protected]> wrote:
> > This is what happened today:
> >
> > Sep 1 21:08:01 frege NETDEV WATCHDOG: eth0: transmit timed out
> > frege ~ # uname -r
> > 2.6.22.5-cfs-v20.5
>
> Can you reproduce this on 2.6.22 (not 2.6.22.x - it might be a -stable
> regression)?
>
> Regards,
> Michal
>
> --
> LOG
> http://www.stardust.webpages.pl/log/
>
Karl Meyer <[email protected]> :
[...]
> am am looking for this issue for some time now, but there where no
> errors in 2.6.22-r2 (gentoo speak, I guess this is 2.6.22.2
> officially), I also ran git-bisect (for more information see the older
> messages in this thread).
2.6.22-r2 in gentoo is based on 2.6.22.1. It is way before
0e4851502f846b13b29b7f88f1250c980d57e944 that you reported to work.
Thus it is not surprizing that it works.
Any update regarding the patchkit that I sent on 2007/08/16 ?
It would help to narrow the culprit.
--
Ueimor
Hi Francois,
this is what I found and sent:
The error exists from patch 2 on. I did some network testing with
patch 1 and currently use it and have no errors so far.
>From my experiences up to now patch 1 should be error free.
Do you need additional info?
2007/9/12, Francois Romieu <[email protected]>:
> Karl Meyer <[email protected]> :
> [...]
> > am am looking for this issue for some time now, but there where no
> > errors in 2.6.22-r2 (gentoo speak, I guess this is 2.6.22.2
> > officially), I also ran git-bisect (for more information see the older
> > messages in this thread).
>
> 2.6.22-r2 in gentoo is based on 2.6.22.1. It is way before
> 0e4851502f846b13b29b7f88f1250c980d57e944 that you reported to work.
> Thus it is not surprizing that it works.
>
> Any update regarding the patchkit that I sent on 2007/08/16 ?
>
> It would help to narrow the culprit.
>
> --
> Ueimor
>
Hi,
after reading about issues with the nics on kontron boards I did a
bios upgrade,
but this did not change anything.
However, yesterday the nic (onboard) I used died. No link at all,
after switching to
the next onboard nic I got a NETDEV transmit timeout with that one on
kernel 2.6.22-r2.
It seems the whole thing is a hardware issue. I will try to figure out
with kontron.
Sorry :(
Karl
2007/9/12, Francois Romieu <[email protected]>:
> Karl Meyer <[email protected]> :
> [...]
> > am am looking for this issue for some time now, but there where no
> > errors in 2.6.22-r2 (gentoo speak, I guess this is 2.6.22.2
> > officially), I also ran git-bisect (for more information see the older
> > messages in this thread).
>
> 2.6.22-r2 in gentoo is based on 2.6.22.1. It is way before
> 0e4851502f846b13b29b7f88f1250c980d57e944 that you reported to work.
> Thus it is not surprizing that it works.
>
> Any update regarding the patchkit that I sent on 2007/08/16 ?
>
> It would help to narrow the culprit.
>
> --
> Ueimor
>