- Use titles markups;
- Adjust identation;
- use literal markup;
- Use the proper notation for footnotes.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
Documentation/misc-devices/index.rst | 1 +
.../misc-devices/pci-endpoint-test.rst | 56 +++++++++++++++++++
.../misc-devices/pci-endpoint-test.txt | 41 --------------
3 files changed, 57 insertions(+), 41 deletions(-)
create mode 100644 Documentation/misc-devices/pci-endpoint-test.rst
delete mode 100644 Documentation/misc-devices/pci-endpoint-test.txt
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index a72ab89e7d1a..17e77b6aa27c 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -22,5 +22,6 @@ fit into other categories.
lis3lv02d
max6875
mic/index
+ pci-endpoint-test
spear-pcie-gadget
xilinx_sdfec
diff --git a/Documentation/misc-devices/pci-endpoint-test.rst b/Documentation/misc-devices/pci-endpoint-test.rst
new file mode 100644
index 000000000000..26e5d9ba146b
--- /dev/null
+++ b/Documentation/misc-devices/pci-endpoint-test.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Driver for PCI Endpoint Test Function
+=====================================
+
+This driver should be used as a host side driver if the root complex is
+connected to a configurable PCI endpoint running ``pci_epf_test`` function
+driver configured according to [1]_.
+
+The "pci_endpoint_test" driver can be used to perform the following tests.
+
+The PCI driver for the test device performs the following tests:
+
+ #) verifying addresses programmed in BAR
+ #) raise legacy IRQ
+ #) raise MSI IRQ
+ #) raise MSI-X IRQ
+ #) read data
+ #) write data
+ #) copy data
+
+This misc driver creates /dev/pci-endpoint-test.<num> for every
+``pci_epf_test`` function connected to the root complex and "ioctls"
+should be used to perform the above tests.
+
+ioctl
+-----
+
+ PCITEST_BAR:
+ Tests the BAR. The number of the BAR to be tested
+ should be passed as argument.
+ PCITEST_LEGACY_IRQ:
+ Tests legacy IRQ
+ PCITEST_MSI:
+ Tests message signalled interrupts. The MSI number
+ to be tested should be passed as argument.
+ PCITEST_MSIX:
+ Tests message signalled interrupts. The MSI-X number
+ to be tested should be passed as argument.
+ PCITEST_SET_IRQTYPE:
+ Changes driver IRQ type configuration. The IRQ type
+ should be passed as argument (0: Legacy, 1:MSI, 2:MSI-X).
+ PCITEST_GET_IRQTYPE:
+ Gets driver IRQ type configuration.
+ PCITEST_WRITE:
+ Perform write tests. The size of the buffer should be passed
+ as argument.
+ PCITEST_READ:
+ Perform read tests. The size of the buffer should be passed
+ as argument.
+ PCITEST_COPY:
+ Perform read tests. The size of the buffer should be passed
+ as argument.
+
+.. [1] Documentation/PCI/endpoint/function/binding/pci-test.txt
diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt
deleted file mode 100644
index 58ccca4416b1..000000000000
--- a/Documentation/misc-devices/pci-endpoint-test.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Driver for PCI Endpoint Test Function
-
-This driver should be used as a host side driver if the root complex is
-connected to a configurable PCI endpoint running *pci_epf_test* function
-driver configured according to [1].
-
-The "pci_endpoint_test" driver can be used to perform the following tests.
-
-The PCI driver for the test device performs the following tests
- *) verifying addresses programmed in BAR
- *) raise legacy IRQ
- *) raise MSI IRQ
- *) raise MSI-X IRQ
- *) read data
- *) write data
- *) copy data
-
-This misc driver creates /dev/pci-endpoint-test.<num> for every
-*pci_epf_test* function connected to the root complex and "ioctls"
-should be used to perform the above tests.
-
-ioctl
------
- PCITEST_BAR: Tests the BAR. The number of the BAR to be tested
- should be passed as argument.
- PCITEST_LEGACY_IRQ: Tests legacy IRQ
- PCITEST_MSI: Tests message signalled interrupts. The MSI number
- to be tested should be passed as argument.
- PCITEST_MSIX: Tests message signalled interrupts. The MSI-X number
- to be tested should be passed as argument.
- PCITEST_SET_IRQTYPE: Changes driver IRQ type configuration. The IRQ type
- should be passed as argument (0: Legacy, 1:MSI, 2:MSI-X).
- PCITEST_GET_IRQTYPE: Gets driver IRQ type configuration.
- PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
- as argument.
- PCITEST_READ: Perform read tests. The size of the buffer should be passed
- as argument.
- PCITEST_COPY: Perform read tests. The size of the buffer should be passed
- as argument.
-
-[1] -> Documentation/PCI/endpoint/function/binding/pci-test.txt
--
2.25.4