Move recovery configuration from debugfs to sysfs.This will
allow usage of this configuration feature in production
devices where access to debugfs might be limited.
Signed-off-by: Rishabh Bhatnagar <[email protected]>
---
Documentation/ABI/testing/sysfs-class-remoteproc | 20 ++++++
drivers/remoteproc/remoteproc_debugfs.c | 78 ------------------------
drivers/remoteproc/remoteproc_sysfs.c | 56 +++++++++++++++++
3 files changed, 76 insertions(+), 78 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
index f6c44fa..7368b50 100644
--- a/Documentation/ABI/testing/sysfs-class-remoteproc
+++ b/Documentation/ABI/testing/sysfs-class-remoteproc
@@ -82,3 +82,23 @@ Description: Remote processor coredump configuration
all data is read by usersapce.
"disabled" means no dump will be collected.
+
+What: /sys/class/remoteproc/.../recovery
+Date: July 2020
+Contact: Bjorn Andersson <[email protected]>, Ohad Ben-Cohen <[email protected]>
+Description: Remote processor recovery mechanism
+
+ Reports the recovery mechanism of the remote processor,
+ which will be one of:
+
+ "enabled"
+ "disabled"
+
+ "enabled" means, the remote processor will be automatically
+ recovered whenever it crashes. Moreover, if the remote
+ processor crashes while recovery is disabled, it will
+ be automatically recovered too as soon as recovery is enabled.
+
+ "disabled" means, a remote processor will remain in a crashed
+ state if it crashes. This is useful for debugging purposes;
+ without it, debugging a crash is substantially harder.
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 732770e..c505f0e 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -84,82 +84,6 @@ static const struct file_operations rproc_name_ops = {
.llseek = generic_file_llseek,
};
-/* expose recovery flag via debugfs */
-static ssize_t rproc_recovery_read(struct file *filp, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct rproc *rproc = filp->private_data;
- char *buf = rproc->recovery_disabled ? "disabled\n" : "enabled\n";
-
- return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
-}
-
-/*
- * By writing to the 'recovery' debugfs entry, we control the behavior of the
- * recovery mechanism dynamically. The default value of this entry is "enabled".
- *
- * The 'recovery' debugfs entry supports these commands:
- *
- * enabled: When enabled, the remote processor will be automatically
- * recovered whenever it crashes. Moreover, if the remote
- * processor crashes while recovery is disabled, it will
- * be automatically recovered too as soon as recovery is enabled.
- *
- * disabled: When disabled, a remote processor will remain in a crashed
- * state if it crashes. This is useful for debugging purposes;
- * without it, debugging a crash is substantially harder.
- *
- * recover: This function will trigger an immediate recovery if the
- * remote processor is in a crashed state, without changing
- * or checking the recovery state (enabled/disabled).
- * This is useful during debugging sessions, when one expects
- * additional crashes to happen after enabling recovery. In this
- * case, enabling recovery will make it hard to debug subsequent
- * crashes, so it's recommended to keep recovery disabled, and
- * instead use the "recover" command as needed.
- */
-static ssize_t
-rproc_recovery_write(struct file *filp, const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct rproc *rproc = filp->private_data;
- char buf[10];
- int ret;
-
- if (count < 1 || count > sizeof(buf))
- return -EINVAL;
-
- ret = copy_from_user(buf, user_buf, count);
- if (ret)
- return -EFAULT;
-
- /* remove end of line */
- if (buf[count - 1] == '\n')
- buf[count - 1] = '\0';
-
- if (!strncmp(buf, "enabled", count)) {
- /* change the flag and begin the recovery process if needed */
- rproc->recovery_disabled = false;
- rproc_trigger_recovery(rproc);
- } else if (!strncmp(buf, "disabled", count)) {
- rproc->recovery_disabled = true;
- } else if (!strncmp(buf, "recover", count)) {
- /* begin the recovery process without changing the flag */
- rproc_trigger_recovery(rproc);
- } else {
- return -EINVAL;
- }
-
- return count;
-}
-
-static const struct file_operations rproc_recovery_ops = {
- .read = rproc_recovery_read,
- .write = rproc_recovery_write,
- .open = simple_open,
- .llseek = generic_file_llseek,
-};
-
/* expose the crash trigger via debugfs */
static ssize_t
rproc_crash_write(struct file *filp, const char __user *user_buf,
@@ -329,8 +253,6 @@ void rproc_create_debug_dir(struct rproc *rproc)
debugfs_create_file("name", 0400, rproc->dbg_dir,
rproc, &rproc_name_ops);
- debugfs_create_file("recovery", 0600, rproc->dbg_dir,
- rproc, &rproc_recovery_ops);
debugfs_create_file("crash", 0200, rproc->dbg_dir,
rproc, &rproc_crash_ops);
debugfs_create_file("resource_table", 0400, rproc->dbg_dir,
diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
index 2a44571..e60a014 100644
--- a/drivers/remoteproc/remoteproc_sysfs.c
+++ b/drivers/remoteproc/remoteproc_sysfs.c
@@ -10,6 +10,61 @@
#define to_rproc(d) container_of(d, struct rproc, dev)
+static ssize_t recovery_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rproc *rproc = to_rproc(dev);
+
+ return sprintf(buf, "%s", rproc->recovery_disabled ? "disabled\n" : "enabled\n");
+}
+
+/*
+ * By writing to the 'recovery' sysfs entry, we control the behavior of the
+ * recovery mechanism dynamically. The default value of this entry is "enabled".
+ *
+ * The 'recovery' sysfs entry supports these commands:
+ *
+ * enabled: When enabled, the remote processor will be automatically
+ * recovered whenever it crashes. Moreover, if the remote
+ * processor crashes while recovery is disabled, it will
+ * be automatically recovered too as soon as recovery is enabled.
+ *
+ * disabled: When disabled, a remote processor will remain in a crashed
+ * state if it crashes. This is useful for debugging purposes;
+ * without it, debugging a crash is substantially harder.
+ *
+ * recover: This function will trigger an immediate recovery if the
+ * remote processor is in a crashed state, without changing
+ * or checking the recovery state (enabled/disabled).
+ * This is useful during debugging sessions, when one expects
+ * additional crashes to happen after enabling recovery. In this
+ * case, enabling recovery will make it hard to debug subsequent
+ * crashes, so it's recommended to keep recovery disabled, and
+ * instead use the "recover" command as needed.
+ */
+static ssize_t recovery_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rproc *rproc = to_rproc(dev);
+
+ if (sysfs_streq(buf, "enabled")) {
+ /* change the flag and begin the recovery process if needed */
+ rproc->recovery_disabled = false;
+ rproc_trigger_recovery(rproc);
+ } else if (sysfs_streq(buf, "disabled")) {
+ rproc->recovery_disabled = true;
+ } else if (sysfs_streq(buf, "recover")) {
+ /* begin the recovery process without changing the flag */
+ rproc_trigger_recovery(rproc);
+ } else {
+ return -EINVAL;
+ }
+
+ return count;
+}
+static DEVICE_ATTR_RW(recovery);
+
/*
* A coredump-configuration-to-string lookup table, for exposing a
* human readable configuration via sysfs. Always keep in sync with
@@ -202,6 +257,7 @@ static DEVICE_ATTR_RO(name);
static struct attribute *rproc_attrs[] = {
&dev_attr_coredump.attr,
+ &dev_attr_recovery.attr,
&dev_attr_firmware.attr,
&dev_attr_state.attr,
&dev_attr_name.attr,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
On 9/29/20 12:17 AM, Rishabh Bhatnagar wrote:
> Move recovery configuration from debugfs to sysfs.This will
> allow usage of this configuration feature in production
> devices where access to debugfs might be limited.
>
> Signed-off-by: Rishabh Bhatnagar <[email protected]>
> ---
> Documentation/ABI/testing/sysfs-class-remoteproc | 20 ++++++
> drivers/remoteproc/remoteproc_debugfs.c | 78 ------------------------
> drivers/remoteproc/remoteproc_sysfs.c | 56 +++++++++++++++++
> 3 files changed, 76 insertions(+), 78 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
> index f6c44fa..7368b50 100644
> --- a/Documentation/ABI/testing/sysfs-class-remoteproc
> +++ b/Documentation/ABI/testing/sysfs-class-remoteproc
> @@ -82,3 +82,23 @@ Description: Remote processor coredump configuration
> all data is read by usersapce.
>
> "disabled" means no dump will be collected.
> +
> +What: /sys/class/remoteproc/.../recovery
> +Date: July 2020
> +Contact: Bjorn Andersson <[email protected]>, Ohad Ben-Cohen <[email protected]>
> +Description: Remote processor recovery mechanism
> +
> + Reports the recovery mechanism of the remote processor,
> + which will be one of:
> +
> + "enabled"
> + "disabled"
> +
> + "enabled" means, the remote processor will be automatically
> + recovered whenever it crashes. Moreover, if the remote
> + processor crashes while recovery is disabled, it will
> + be automatically recovered too as soon as recovery is enabled.
> +
> + "disabled" means, a remote processor will remain in a crashed
> + state if it crashes. This is useful for debugging purposes;
> + without it, debugging a crash is substantially harder.
> diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
> index 732770e..c505f0e 100644
> --- a/drivers/remoteproc/remoteproc_debugfs.c
> +++ b/drivers/remoteproc/remoteproc_debugfs.c
> @@ -84,82 +84,6 @@ static const struct file_operations rproc_name_ops = {
> .llseek = generic_file_llseek,
> };
>
> -/* expose recovery flag via debugfs */
> -static ssize_t rproc_recovery_read(struct file *filp, char __user *userbuf,
> - size_t count, loff_t *ppos)
> -{
> - struct rproc *rproc = filp->private_data;
> - char *buf = rproc->recovery_disabled ? "disabled\n" : "enabled\n";
> -
> - return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
> -}
> -
> -/*
> - * By writing to the 'recovery' debugfs entry, we control the behavior of the
> - * recovery mechanism dynamically. The default value of this entry is "enabled".
> - *
> - * The 'recovery' debugfs entry supports these commands:
> - *
> - * enabled: When enabled, the remote processor will be automatically
> - * recovered whenever it crashes. Moreover, if the remote
> - * processor crashes while recovery is disabled, it will
> - * be automatically recovered too as soon as recovery is enabled.
> - *
> - * disabled: When disabled, a remote processor will remain in a crashed
> - * state if it crashes. This is useful for debugging purposes;
> - * without it, debugging a crash is substantially harder.
> - *
> - * recover: This function will trigger an immediate recovery if the
> - * remote processor is in a crashed state, without changing
> - * or checking the recovery state (enabled/disabled).
> - * This is useful during debugging sessions, when one expects
> - * additional crashes to happen after enabling recovery. In this
> - * case, enabling recovery will make it hard to debug subsequent
> - * crashes, so it's recommended to keep recovery disabled, and
> - * instead use the "recover" command as needed.
> - */
> -static ssize_t
> -rproc_recovery_write(struct file *filp, const char __user *user_buf,
> - size_t count, loff_t *ppos)
> -{
> - struct rproc *rproc = filp->private_data;
> - char buf[10];
> - int ret;
> -
> - if (count < 1 || count > sizeof(buf))
> - return -EINVAL;
> -
> - ret = copy_from_user(buf, user_buf, count);
> - if (ret)
> - return -EFAULT;
> -
> - /* remove end of line */
> - if (buf[count - 1] == '\n')
> - buf[count - 1] = '\0';
> -
> - if (!strncmp(buf, "enabled", count)) {
> - /* change the flag and begin the recovery process if needed */
> - rproc->recovery_disabled = false;
> - rproc_trigger_recovery(rproc);
> - } else if (!strncmp(buf, "disabled", count)) {
> - rproc->recovery_disabled = true;
> - } else if (!strncmp(buf, "recover", count)) {
> - /* begin the recovery process without changing the flag */
> - rproc_trigger_recovery(rproc);
> - } else {
> - return -EINVAL;
> - }
> -
> - return count;
> -}
> -
> -static const struct file_operations rproc_recovery_ops = {
> - .read = rproc_recovery_read,
> - .write = rproc_recovery_write,
> - .open = simple_open,
> - .llseek = generic_file_llseek,
> -};
> -
> /* expose the crash trigger via debugfs */
> static ssize_t
> rproc_crash_write(struct file *filp, const char __user *user_buf,
> @@ -329,8 +253,6 @@ void rproc_create_debug_dir(struct rproc *rproc)
>
> debugfs_create_file("name", 0400, rproc->dbg_dir,
> rproc, &rproc_name_ops);
> - debugfs_create_file("recovery", 0600, rproc->dbg_dir,
> - rproc, &rproc_recovery_ops);
> debugfs_create_file("crash", 0200, rproc->dbg_dir,
> rproc, &rproc_crash_ops);
> debugfs_create_file("resource_table", 0400, rproc->dbg_dir,
> diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
> index 2a44571..e60a014 100644
> --- a/drivers/remoteproc/remoteproc_sysfs.c
> +++ b/drivers/remoteproc/remoteproc_sysfs.c
> @@ -10,6 +10,61 @@
>
> #define to_rproc(d) container_of(d, struct rproc, dev)
>
> +static ssize_t recovery_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct rproc *rproc = to_rproc(dev);
> +
> + return sprintf(buf, "%s", rproc->recovery_disabled ? "disabled\n" : "enabled\n");
> +}
> +
> +/*
> + * By writing to the 'recovery' sysfs entry, we control the behavior of the
> + * recovery mechanism dynamically. The default value of this entry is "enabled".
> + *
> + * The 'recovery' sysfs entry supports these commands:
> + *
> + * enabled: When enabled, the remote processor will be automatically
> + * recovered whenever it crashes. Moreover, if the remote
> + * processor crashes while recovery is disabled, it will
> + * be automatically recovered too as soon as recovery is enabled.
> + *
> + * disabled: When disabled, a remote processor will remain in a crashed
> + * state if it crashes. This is useful for debugging purposes;
> + * without it, debugging a crash is substantially harder.
> + *
> + * recover: This function will trigger an immediate recovery if the
> + * remote processor is in a crashed state, without changing
> + * or checking the recovery state (enabled/disabled).
> + * This is useful during debugging sessions, when one expects
Recovery seems to be related to debugging, is it wise to expose it in sysfs?
This would allow the user space to restart remote processor and generate core
dumps at any time...Is this the expected behavior?
For your information, in the ST test suite, we use this mechanism also to simulate a
proc crash. This is useful for testing the recovery of RPMsg channels...
Regards
Arnaud
> + * additional crashes to happen after enabling recovery. In this
> + * case, enabling recovery will make it hard to debug subsequent
> + * crashes, so it's recommended to keep recovery disabled, and
> + * instead use the "recover" command as needed.
> + */
> +static ssize_t recovery_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct rproc *rproc = to_rproc(dev);
> +
> + if (sysfs_streq(buf, "enabled")) {
> + /* change the flag and begin the recovery process if needed */
> + rproc->recovery_disabled = false;
> + rproc_trigger_recovery(rproc);
> + } else if (sysfs_streq(buf, "disabled")) {
> + rproc->recovery_disabled = true;
> + } else if (sysfs_streq(buf, "recover")) {
> + /* begin the recovery process without changing the flag */
> + rproc_trigger_recovery(rproc);
> + } else {
> + return -EINVAL;
> + }
> +
> + return count;
> +}
> +static DEVICE_ATTR_RW(recovery);
> +
> /*
> * A coredump-configuration-to-string lookup table, for exposing a
> * human readable configuration via sysfs. Always keep in sync with
> @@ -202,6 +257,7 @@ static DEVICE_ATTR_RO(name);
>
> static struct attribute *rproc_attrs[] = {
> &dev_attr_coredump.attr,
> + &dev_attr_recovery.attr,
> &dev_attr_firmware.attr,
> &dev_attr_state.attr,
> &dev_attr_name.attr,
>
On 9/30/20 10:11 AM, Arnaud POULIQUEN wrote:
>
>
> On 9/29/20 12:17 AM, Rishabh Bhatnagar wrote:
>> Move recovery configuration from debugfs to sysfs.This will
>> allow usage of this configuration feature in production
>> devices where access to debugfs might be limited.
>>
>> Signed-off-by: Rishabh Bhatnagar <[email protected]>
>> ---
>> Documentation/ABI/testing/sysfs-class-remoteproc | 20 ++++++
>> drivers/remoteproc/remoteproc_debugfs.c | 78 ------------------------
>> drivers/remoteproc/remoteproc_sysfs.c | 56 +++++++++++++++++
>> 3 files changed, 76 insertions(+), 78 deletions(-)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
>> index f6c44fa..7368b50 100644
>> --- a/Documentation/ABI/testing/sysfs-class-remoteproc
>> +++ b/Documentation/ABI/testing/sysfs-class-remoteproc
>> @@ -82,3 +82,23 @@ Description: Remote processor coredump configuration
>> all data is read by usersapce.
>>
>> "disabled" means no dump will be collected.
>> +
>> +What: /sys/class/remoteproc/.../recovery
>> +Date: July 2020
>> +Contact: Bjorn Andersson <[email protected]>, Ohad Ben-Cohen <[email protected]>
>> +Description: Remote processor recovery mechanism
>> +
>> + Reports the recovery mechanism of the remote processor,
>> + which will be one of:
>> +
>> + "enabled"
>> + "disabled"
>> +
>> + "enabled" means, the remote processor will be automatically
>> + recovered whenever it crashes. Moreover, if the remote
>> + processor crashes while recovery is disabled, it will
>> + be automatically recovered too as soon as recovery is enabled.
>> +
>> + "disabled" means, a remote processor will remain in a crashed
>> + state if it crashes. This is useful for debugging purposes;
>> + without it, debugging a crash is substantially harder.
>> diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
>> index 732770e..c505f0e 100644
>> --- a/drivers/remoteproc/remoteproc_debugfs.c
>> +++ b/drivers/remoteproc/remoteproc_debugfs.c
>> @@ -84,82 +84,6 @@ static const struct file_operations rproc_name_ops = {
>> .llseek = generic_file_llseek,
>> };
>>
>> -/* expose recovery flag via debugfs */
>> -static ssize_t rproc_recovery_read(struct file *filp, char __user *userbuf,
>> - size_t count, loff_t *ppos)
>> -{
>> - struct rproc *rproc = filp->private_data;
>> - char *buf = rproc->recovery_disabled ? "disabled\n" : "enabled\n";
>> -
>> - return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
>> -}
>> -
>> -/*
>> - * By writing to the 'recovery' debugfs entry, we control the behavior of the
>> - * recovery mechanism dynamically. The default value of this entry is "enabled".
>> - *
>> - * The 'recovery' debugfs entry supports these commands:
>> - *
>> - * enabled: When enabled, the remote processor will be automatically
>> - * recovered whenever it crashes. Moreover, if the remote
>> - * processor crashes while recovery is disabled, it will
>> - * be automatically recovered too as soon as recovery is enabled.
>> - *
>> - * disabled: When disabled, a remote processor will remain in a crashed
>> - * state if it crashes. This is useful for debugging purposes;
>> - * without it, debugging a crash is substantially harder.
>> - *
>> - * recover: This function will trigger an immediate recovery if the
>> - * remote processor is in a crashed state, without changing
>> - * or checking the recovery state (enabled/disabled).
>> - * This is useful during debugging sessions, when one expects
>> - * additional crashes to happen after enabling recovery. In this
>> - * case, enabling recovery will make it hard to debug subsequent
>> - * crashes, so it's recommended to keep recovery disabled, and
>> - * instead use the "recover" command as needed.
>> - */
>> -static ssize_t
>> -rproc_recovery_write(struct file *filp, const char __user *user_buf,
>> - size_t count, loff_t *ppos)
>> -{
>> - struct rproc *rproc = filp->private_data;
>> - char buf[10];
>> - int ret;
>> -
>> - if (count < 1 || count > sizeof(buf))
>> - return -EINVAL;
>> -
>> - ret = copy_from_user(buf, user_buf, count);
>> - if (ret)
>> - return -EFAULT;
>> -
>> - /* remove end of line */
>> - if (buf[count - 1] == '\n')
>> - buf[count - 1] = '\0';
>> -
>> - if (!strncmp(buf, "enabled", count)) {
>> - /* change the flag and begin the recovery process if needed */
>> - rproc->recovery_disabled = false;
>> - rproc_trigger_recovery(rproc);
>> - } else if (!strncmp(buf, "disabled", count)) {
>> - rproc->recovery_disabled = true;
>> - } else if (!strncmp(buf, "recover", count)) {
>> - /* begin the recovery process without changing the flag */
>> - rproc_trigger_recovery(rproc);
>> - } else {
>> - return -EINVAL;
>> - }
>> -
>> - return count;
>> -}
>> -
>> -static const struct file_operations rproc_recovery_ops = {
>> - .read = rproc_recovery_read,
>> - .write = rproc_recovery_write,
>> - .open = simple_open,
>> - .llseek = generic_file_llseek,
>> -};
>> -
>> /* expose the crash trigger via debugfs */
>> static ssize_t
>> rproc_crash_write(struct file *filp, const char __user *user_buf,
>> @@ -329,8 +253,6 @@ void rproc_create_debug_dir(struct rproc *rproc)
>>
>> debugfs_create_file("name", 0400, rproc->dbg_dir,
>> rproc, &rproc_name_ops);
>> - debugfs_create_file("recovery", 0600, rproc->dbg_dir,
>> - rproc, &rproc_recovery_ops);
>> debugfs_create_file("crash", 0200, rproc->dbg_dir,
>> rproc, &rproc_crash_ops);
>> debugfs_create_file("resource_table", 0400, rproc->dbg_dir,
>> diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
>> index 2a44571..e60a014 100644
>> --- a/drivers/remoteproc/remoteproc_sysfs.c
>> +++ b/drivers/remoteproc/remoteproc_sysfs.c
>> @@ -10,6 +10,61 @@
>>
>> #define to_rproc(d) container_of(d, struct rproc, dev)
>>
>> +static ssize_t recovery_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct rproc *rproc = to_rproc(dev);
>> +
>> + return sprintf(buf, "%s", rproc->recovery_disabled ? "disabled\n" : "enabled\n");
>> +}
>> +
>> +/*
>> + * By writing to the 'recovery' sysfs entry, we control the behavior of the
>> + * recovery mechanism dynamically. The default value of this entry is "enabled".
>> + *
>> + * The 'recovery' sysfs entry supports these commands:
>> + *
>> + * enabled: When enabled, the remote processor will be automatically
>> + * recovered whenever it crashes. Moreover, if the remote
>> + * processor crashes while recovery is disabled, it will
>> + * be automatically recovered too as soon as recovery is enabled.
>> + *
>> + * disabled: When disabled, a remote processor will remain in a crashed
>> + * state if it crashes. This is useful for debugging purposes;
>> + * without it, debugging a crash is substantially harder.
>> + *
>> + * recover: This function will trigger an immediate recovery if the
>> + * remote processor is in a crashed state, without changing
>> + * or checking the recovery state (enabled/disabled).
>> + * This is useful during debugging sessions, when one expects
>
> Recovery seems to be related to debugging, is it wise to expose it in sysfs?
> This would allow the user space to restart remote processor and generate core
> dumps at any time...Is this the expected behavior?
This comment is wrong, please forget it. I mixed with some code from last Kernel LTS.
The state is checked in rproc_trigger_recovery, so no issue.
My apologize for this stupid comment.
Regards
Arnaud
>
> For your information, in the ST test suite, we use this mechanism also to simulate a
> proc crash. This is useful for testing the recovery of RPMsg channels...
>
> Regards
> Arnaud
>
>> + * additional crashes to happen after enabling recovery. In this
>> + * case, enabling recovery will make it hard to debug subsequent
>> + * crashes, so it's recommended to keep recovery disabled, and
>> + * instead use the "recover" command as needed.
>> + */
>> +static ssize_t recovery_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct rproc *rproc = to_rproc(dev);
>> +
>> + if (sysfs_streq(buf, "enabled")) {
>> + /* change the flag and begin the recovery process if needed */
>> + rproc->recovery_disabled = false;
>> + rproc_trigger_recovery(rproc);
>> + } else if (sysfs_streq(buf, "disabled")) {
>> + rproc->recovery_disabled = true;
>> + } else if (sysfs_streq(buf, "recover")) {
>> + /* begin the recovery process without changing the flag */
>> + rproc_trigger_recovery(rproc);
>> + } else {
>> + return -EINVAL;
>> + }
>> +
>> + return count;
>> +}
>> +static DEVICE_ATTR_RW(recovery);
>> +
>> /*
>> * A coredump-configuration-to-string lookup table, for exposing a
>> * human readable configuration via sysfs. Always keep in sync with
>> @@ -202,6 +257,7 @@ static DEVICE_ATTR_RO(name);
>>
>> static struct attribute *rproc_attrs[] = {
>> &dev_attr_coredump.attr,
>> + &dev_attr_recovery.attr,
>> &dev_attr_firmware.attr,
>> &dev_attr_state.attr,
>> &dev_attr_name.attr,
>>