The IP can handle two slave addresses. One address can either be
7 bits or 10 bits while the other can only be 7 bits.
In order to ensure that a 10 bits address can always be allocated
(assuming there is only one 7 bits address already allocated),
pick up the 7-bits only address slot in priority when performing a 7-bits
address allocation.
Fixes: 60d609f3 ("i2c: i2c-stm32f7: Add slave support")
Signed-off-by: Alain Volmat <[email protected]>
---
drivers/i2c/busses/i2c-stm32f7.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index d36cf08461f7..cfae01b15243 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1265,7 +1265,7 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
* slave[0] supports 7-bit and 10-bit slave address
* slave[1] supports 7-bit slave address only
*/
- for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
if (i == 1 && (slave->flags & I2C_CLIENT_PEC))
continue;
if (!i2c_dev->slave[i]) {
--
2.7.4
Hello
Looks good
Reviewed-by: Pierre-Yves MORDRET <[email protected]>
Thx
Regards
On 10/15/19 3:03 PM, Alain Volmat wrote:
> The IP can handle two slave addresses. One address can either be
> 7 bits or 10 bits while the other can only be 7 bits.
> In order to ensure that a 10 bits address can always be allocated
> (assuming there is only one 7 bits address already allocated),
> pick up the 7-bits only address slot in priority when performing a 7-bits
> address allocation.
>
> Fixes: 60d609f3 ("i2c: i2c-stm32f7: Add slave support")
>
> Signed-off-by: Alain Volmat <[email protected]>
> ---
> drivers/i2c/busses/i2c-stm32f7.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index d36cf08461f7..cfae01b15243 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -1265,7 +1265,7 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
> * slave[0] supports 7-bit and 10-bit slave address
> * slave[1] supports 7-bit slave address only
> */
> - for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
> + for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
> if (i == 1 && (slave->flags & I2C_CLIENT_PEC))
> continue;
> if (!i2c_dev->slave[i]) {
>
On Tue, Oct 15, 2019 at 03:03:09PM +0200, Alain Volmat wrote:
> The IP can handle two slave addresses. One address can either be
> 7 bits or 10 bits while the other can only be 7 bits.
> In order to ensure that a 10 bits address can always be allocated
> (assuming there is only one 7 bits address already allocated),
> pick up the 7-bits only address slot in priority when performing a 7-bits
> address allocation.
>
> Fixes: 60d609f3 ("i2c: i2c-stm32f7: Add slave support")
>
> Signed-off-by: Alain Volmat <[email protected]>
Applied to for-next, thanks!