2019-06-12 18:26:05

by Nicolas Saenz Julienne

Subject: [PATCH v4 6/7] ARM: defconfig: enable cpufreq driver for RPi

This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform.

In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
the conservative governor was selected as default since it better
handles the high frequency transition latency.

Signed-off-by: Nicolas Saenz Julienne <[email protected]>
Acked-by: Stefan Wahren <[email protected]>
---

Changes since v2:
- Change default governor to conservative in bcm2835_defconfig
- Set all as builtin in bcm2835_defconfig

arch/arm/configs/bcm2835_defconfig | 9 +++++++++
arch/arm/configs/multi_v7_defconfig | 2 ++
2 files changed, 11 insertions(+)

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index dcf7610cfe55..519ff58e67b3 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -37,6 +37,14 @@ CONFIG_CMA=y
CONFIG_SECCOMP=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
@@ -132,6 +140,7 @@ CONFIG_DMA_BCM2835=y
CONFIG_STAGING=y
CONFIG_SND_BCM2835=m
CONFIG_VIDEO_BCM2835=m
+CONFIG_CLK_RASPBERRYPI=y
CONFIG_MAILBOX=y
CONFIG_BCM2835_MBOX=y
# CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6b748f214eae..0fd60a83f768 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -102,6 +102,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_CPUFREQ_DT=y
CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_CPUIDLE=y
@@ -899,6 +900,7 @@ CONFIG_STAGING_BOARD=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_S2MPS11=m
+CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_CLK_RPM=y
CONFIG_APQ_MMCC_8084=y
--
2.21.0

2019-07-24 02:33:13

by Stefan Wahren

Subject: Re: [PATCH v4 6/7] ARM: defconfig: enable cpufreq driver for RPi

Am 12.06.19 um 20:24 schrieb Nicolas Saenz Julienne:
> This enables on both multi_v7_defconfig and bcm2835_defconfig the new
> firmware based clock and cpufreq drivers for the Raspberry Pi platform.
>
> In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
> the conservative governor was selected as default since it better
> handles the high frequency transition latency.
>
> Signed-off-by: Nicolas Saenz Julienne <[email protected]>
> Acked-by: Stefan Wahren <[email protected]>

Applied to bcm2835-defconfig-next

Thanks