Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early
can result in MAC ending up in a broken/blocked state.
Fix this by handling this bit in the .mac_link_up and .mac_link_down
calls instead of in .mac_finish.
Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Suggested-by: Mason-cw Chang <[email protected]>
Signed-off-by: Daniel Golle <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index de123350bd46b..caa13b9cedff0 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -677,8 +677,7 @@ static int mtk_mac_finish(struct phylink_config *config, unsigned int mode,
mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
mcr_new = mcr_cur;
mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
- MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK |
- MAC_MCR_RX_FIFO_CLR_DIS;
+ MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_RX_FIFO_CLR_DIS;
/* Only update control register when needed! */
if (mcr_new != mcr_cur)
@@ -694,7 +693,7 @@ static void mtk_mac_link_down(struct phylink_config *config, unsigned int mode,
phylink_config);
u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
- mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN);
+ mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_FORCE_LINK);
mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
}
@@ -803,7 +802,7 @@ static void mtk_mac_link_up(struct phylink_config *config,
if (rx_pause)
mcr |= MAC_MCR_FORCE_RX_FC;
- mcr |= MAC_MCR_TX_EN | MAC_MCR_RX_EN;
+ mcr |= MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_FORCE_LINK;
mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
}
--
2.44.0
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.
Without this patch, the PPE may experience a hang during the reboot test.
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b40da332dfe763932a82f9f62a4709457a15dd6c
Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Suggested-by: Bc-bocun Chen <[email protected]>
Signed-off-by: Daniel Golle <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_ppe.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_ppe.c b/drivers/net/ethernet/mediatek/mtk_ppe.c
index b2a5d9c3733d4..6ce0db3a1a920 100644
--- a/drivers/net/ethernet/mediatek/mtk_ppe.c
+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
@@ -994,7 +994,7 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
MTK_PPE_KEEPALIVE_DISABLE) |
FIELD_PREP(MTK_PPE_TB_CFG_HASH_MODE, 1) |
FIELD_PREP(MTK_PPE_TB_CFG_SCAN_MODE,
- MTK_PPE_SCAN_MODE_KEEPALIVE_AGE) |
+ MTK_PPE_SCAN_MODE_CHECK_AGE) |
FIELD_PREP(MTK_PPE_TB_CFG_ENTRY_NUM,
MTK_PPE_ENTRIES_SHIFT);
if (mtk_is_netsys_v2_or_greater(ppe->eth))
@@ -1090,17 +1090,21 @@ int mtk_ppe_stop(struct mtk_ppe *ppe)
mtk_ppe_cache_enable(ppe, false);
- /* disable offload engine */
- ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN);
- ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0);
-
/* disable aging */
val = MTK_PPE_TB_CFG_AGE_NON_L4 |
MTK_PPE_TB_CFG_AGE_UNBIND |
MTK_PPE_TB_CFG_AGE_TCP |
MTK_PPE_TB_CFG_AGE_UDP |
- MTK_PPE_TB_CFG_AGE_TCP_FIN;
+ MTK_PPE_TB_CFG_AGE_TCP_FIN |
+ MTK_PPE_TB_CFG_SCAN_MODE;
ppe_clear(ppe, MTK_PPE_TB_CFG, val);
- return mtk_ppe_wait_busy(ppe);
+ if (mtk_ppe_wait_busy(ppe))
+ return -ETIMEDOUT;
+
+ /* disable offload engine */
+ ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN);
+ ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0);
+
+ return 0;
}
--
2.44.0
Hello:
This series was applied to netdev/net.git (main)
by David S. Miller <[email protected]>:
On Wed, 13 Mar 2024 22:50:18 +0000 you wrote:
> Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early
> can result in MAC ending up in a broken/blocked state.
>
> Fix this by handling this bit in the .mac_link_up and .mac_link_down
> calls instead of in .mac_finish.
>
> Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
> Suggested-by: Mason-cw Chang <[email protected]>
> Signed-off-by: Daniel Golle <[email protected]>
>
> [...]
Here is the summary with links:
- [net,1/2] net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up
https://git.kernel.org/netdev/net/c/f1b85ef15a99
- [net,2/2] net: ethernet: mtk_eth_soc: fix PPE hanging issue
https://git.kernel.org/netdev/net/c/ea80e3ed09ab
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html