Add support for the base Device Tree for Imagination Technologies'
Pistachio SoC.
This commit supports the following peripherals:
* Clocks
* Pinctrl and GPIO
* UART
* SPI
* I2C
* PWM
* ADC
* Watchdog
* Ethernet
* MMC
* DMA engine
* Crypto
* I2S
* SPDIF
* Internal DAC
* Timer
* USB
* IR
* Interrupt Controller
Signed-off-by: Rahul Bedarkar <[email protected]>
---
Changes in v2:
- No change
---
MAINTAINERS | 2 +-
arch/mips/boot/dts/img/pistachio.dtsi | 924 ++++++++++++++++++++++++++++++++++
2 files changed, 925 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/boot/dts/img/pistachio.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index 207eaef..98bcf06 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9509,7 +9509,7 @@ L: [email protected]
S: Maintained
F: arch/mips/pistachio/
F: arch/mips/include/asm/mach-pistachio/
-F: arch/mips/boot/dts/pistachio/
+F: arch/mips/boot/dts/img/pistachio*
F: arch/mips/configs/pistachio*_defconfig
PKTCDVD DRIVER
diff --git a/arch/mips/boot/dts/img/pistachio.dtsi b/arch/mips/boot/dts/img/pistachio.dtsi
new file mode 100644
index 0000000..57809f6
--- /dev/null
+++ b/arch/mips/boot/dts/img/pistachio.dtsi
@@ -0,0 +1,924 @@
+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ * Copyright (C) 2015 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/pistachio-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+#include <dt-bindings/reset/pistachio-resets.h>
+
+/ {
+ compatible = "img,pistachio";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,interaptiv";
+ reg = <0>;
+ clocks = <&clk_core CLK_MIPS_PLL>;
+ clock-names = "cpu";
+ clock-latency = <1000>;
+ operating-points = <
+ /* kHz uV(dummy) */
+ 546000 1150000
+ 520000 1100000
+ 494000 1000000
+ 468000 950000
+ 442000 900000
+ 416000 800000
+ >;
+ };
+ };
+
+ i2c0: i2c@18100000 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100000 0x200>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C0>,
+ <&cr_periph SYS_CLK_I2C0>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C0_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C0_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@18100200 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100200 0x200>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C1>,
+ <&cr_periph SYS_CLK_I2C1>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C1_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C1_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@18100400 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100400 0x200>;
+ interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C2>,
+ <&cr_periph SYS_CLK_I2C2>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C2_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C2_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@18100600 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100600 0x200>;
+ interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C3>,
+ <&cr_periph SYS_CLK_I2C3>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C3_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C3_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2s_in: i2s-in@18100800 {
+ compatible = "img,i2s-in";
+ reg = <0x18100800 0x200>;
+ interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 30 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_I2S_IN>;
+ clock-names = "sys";
+ img,i2s-channels = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_in_pins>;
+ status = "disabled";
+
+ #sound-dai-cells = <0>;
+ };
+
+ i2s_out: i2s-out@18100a00 {
+ compatible = "img,i2s-out";
+ reg = <0x18100a00 0x200>;
+ interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 23 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_I2S_OUT>,
+ <&clk_core CLK_I2S>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_I2S_DIV>;
+ assigned-clock-rates = <12288000>;
+ img,i2s-channels = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_out_pins>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_I2S_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ parallel_out: parallel-audio-out@18100c00 {
+ compatible = "img,parallel-out";
+ reg = <0x18100c00 0x100>;
+ interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 16 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_PAUD_OUT>,
+ <&clk_core CLK_AUDIO_DAC>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_AUDIO_DAC_DIV>;
+ assigned-clock-rates = <12288000>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_PRL_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_out: spdif-out@18100d00 {
+ compatible = "img,spdif-out";
+ reg = <0x18100d00 0x100>;
+ interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 14 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
+ <&clk_core CLK_SPDIF>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_SPDIF_DIV>;
+ assigned-clock-rates = <12288000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_out_pin>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in@18100e00 {
+ compatible = "img,spdif-in";
+ reg = <0x18100e00 0x100>;
+ interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 15 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
+ clock-names = "sys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_in_pin>;
+ status = "disabled";
+
+ #sound-dai-cells = <0>;
+ };
+
+ internal_dac: internal-dac {
+ compatible = "img,pistachio-internal-dac";
+ img,cr-top = <&cr_top>;
+ img,voltage-select = <1>;
+
+ #sound-dai-cells = <0>;
+ };
+
+ spfi0: spi@18100f00 {
+ compatible = "img,spfi";
+ reg = <0x18100f00 0x100>;
+ interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SPI0>, <&cr_periph SYS_CLK_SPI0_MASTER>;
+ clock-names = "sys", "spfi";
+ dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+ dma-names = "rx", "tx";
+ spfi-max-frequency = <50000000>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spfi1: spi@18101000 {
+ compatible = "img,spfi";
+ reg = <0x18101000 0x100>;
+ interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SPI1>, <&cr_periph SYS_CLK_SPI1>;
+ clock-names = "sys", "spfi";
+ dmas = <&mdc 1 0xffffffff 0>, <&mdc 2 0xffffffff 0>;
+ dma-names = "rx", "tx";
+ img,supports-quad-mode;
+ spfi-max-frequency = <50000000>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pwm: pwm@18101300 {
+ compatible = "img,pistachio-pwm";
+ reg = <0x18101300 0x100>;
+ clocks = <&clk_periph PERIPH_CLK_PWM>,
+ <&cr_periph SYS_CLK_PWM>;
+ clock-names = "pwm", "sys";
+ img,cr-periph = <&cr_periph>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ uart0: uart@18101400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18101400 0x100>;
+ interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_UART0>, <&cr_periph SYS_CLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ assigned-clocks = <&clk_core CLK_UART0_INTERNAL_DIV>,
+ <&clk_core CLK_UART0_DIV>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-0 = <&uart0_pins>, <&uart0_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ uart1: uart@18101500 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18101500 0x100>;
+ interrupts = <GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_UART1>, <&cr_periph SYS_CLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ assigned-clocks = <&clk_core CLK_UART1_INTERNAL_DIV>,
+ <&clk_core CLK_UART1_DIV>;
+ assigned-clock-rates = <114278400>, <1843200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ adc: adc@18101600 {
+ compatible = "cosmic,10001-adc";
+ reg = <0x18101600 0x24>;
+ adc-reserved-channels = <0x30>;
+ clocks = <&clk_core CLK_AUX_ADC>;
+ clock-names = "adc";
+ assigned-clocks = <&clk_core CLK_AUX_ADC_INTERNAL_DIV>,
+ <&clk_core CLK_AUX_ADC_DIV>;
+ assigned-clock-rates = <100000000>, <1000000>;
+ status = "disabled";
+
+ #io-channel-cells = <1>;
+ };
+
+ pinctrl: pinctrl@18101c00 {
+ compatible = "img,pistachio-system-pinctrl";
+ reg = <0x18101c00 0x400>;
+
+ gpio0: gpio0 {
+ interrupts = <GIC_SHARED 71 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1 {
+ interrupts = <GIC_SHARED 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2 {
+ interrupts = <GIC_SHARED 73 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3 {
+ interrupts = <GIC_SHARED 74 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio4 {
+ interrupts = <GIC_SHARED 75 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio5 {
+ interrupts = <GIC_SHARED 76 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 80 10>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pin_i2c0: i2c0 {
+ pins = "mfio28", "mfio29";
+ function = "i2c0";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pin_i2c1: i2c1 {
+ pins = "mfio30", "mfio31";
+ function = "i2c1";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ pin_i2c2: i2c2 {
+ pins = "mfio32", "mfio33";
+ function = "i2c2";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c3_pins: i2c3-pins {
+ pin_i2c3: i2c3 {
+ pins = "mfio34", "mfio35";
+ function = "i2c3";
+ drive-strength = <4>;
+ };
+ };
+
+ spim0_pins: spim0-pins {
+ pin_spim0: spim0 {
+ pins = "mfio9", "mfio10";
+ function = "spim0";
+ drive-strength = <4>;
+ };
+ spim0_clk: spim0-clk {
+ pins = "mfio8";
+ function = "spim0";
+ drive-strength = <4>;
+ };
+ };
+
+ spim0_cs0_alt_pin: spim0-cs0-alt-pin {
+ spim0-cs0 {
+ pins = "mfio2";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs1_pin: spim0-cs1-pin {
+ spim0-cs1 {
+ pins = "mfio1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs2_pin: spim0-cs2-pin {
+ spim0-cs2 {
+ pins = "mfio55";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs2_alt_pin: spim0-cs2-alt-pin {
+ spim0-cs2 {
+ pins = "mfio28";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs3_pin: spim0-cs3-pin {
+ spim0-cs3 {
+ pins = "mfio56";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs3_alt_pin: spim0-cs3-alt-pin {
+ spim0-cs3 {
+ pins = "mfio29";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs4_pin: spim0-cs4-pin {
+ spim0-cs4 {
+ pins = "mfio57";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs4_alt_pin: spim0-cs4-alt-pin {
+ spim0-cs4 {
+ pins = "mfio30";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_pins: spim1-pins {
+ spim1 {
+ pins = "mfio3", "mfio4", "mfio5";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_quad_pins: spim1-quad-pins {
+ spim1-quad {
+ pins = "mfio6", "mfio7";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs0_pin: spim1-cs0-pins {
+ spim1-cs0 {
+ pins = "mfio0";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs1_pin: spim1-cs1-pin {
+ spim1-cs1 {
+ pins = "mfio1";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs1_alt_pin: spim1-cs1-alt-pin {
+ spim1-cs1 {
+ pins = "mfio58";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_pin: spim1-cs2-pin {
+ spim1-cs2 {
+ pins = "mfio2";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_alt0_pin: spim1-cs2-alt0-pin {
+ spim1-cs2 {
+ pins = "mfio31";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_alt1_pin: spim1-cs2-alt1-pin {
+ spim1-cs2 {
+ pins = "mfio55";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs3_pin: spim1-cs3-pin {
+ spim1-cs3 {
+ pins = "mfio56";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs4_pin: spim1-cs4-pin {
+ spim1-cs4 {
+ pins = "mfio57";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0 {
+ pins = "mfio55", "mfio56";
+ function = "uart0";
+ drive-strength = <2>;
+ };
+ };
+
+ uart0_rts_cts_pins: uart0-rts-cts-pins {
+ uart0-rts-cts {
+ pins = "mfio57", "mfio58";
+ function = "uart0";
+ drive-strength = <2>;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ uart1 {
+ pins = "mfio59", "mfio60";
+ function = "uart1";
+ drive-strength = <2>;
+ };
+ };
+
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ uart1-rts-cts {
+ pins = "mfio1", "mfio2";
+ function = "uart1";
+ drive-strength = <2>;
+ };
+ };
+
+ enet_pins: enet-pins {
+ pin_enet: enet {
+ pins = "mfio63", "mfio64", "mfio65", "mfio66",
+ "mfio67", "mfio68", "mfio69", "mfio70";
+ function = "eth";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_enet_phy_clk: enet-phy-clk {
+ pins = "mfio71";
+ function = "eth";
+ slew-rate = <1>;
+ drive-strength = <8>;
+ };
+ };
+
+ sdhost_pins: sdhost-pins {
+ pin_sdhost_clk: sdhost-clk {
+ pins = "mfio15";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_cmd: sdhost-cmd {
+ pins = "mfio16";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_data: sdhost-data {
+ pins = "mfio17", "mfio18", "mfio19", "mfio20",
+ "mfio21", "mfio22", "mfio23", "mfio24";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_power_select: sdhost-power-select {
+ pins = "mfio25";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <2>;
+ };
+ pin_sdhost_card_detect: sdhost-card-detect {
+ pins = "mfio26";
+ function = "sdhost";
+ drive-strength = <2>;
+ };
+ pin_sdhost_write_protect: sdhost-write-protect {
+ pins = "mfio27";
+ function = "sdhost";
+ drive-strength = <2>;
+ };
+ };
+
+ ir_pin: ir-pin {
+ ir-data {
+ pins = "mfio72";
+ function = "ir";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm0_pin: pwmpdm0-pin {
+ pwmpdm0 {
+ pins = "mfio73";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm1_pin: pwmpdm1-pin {
+ pwmpdm1 {
+ pins = "mfio74";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm2_pin: pwmpdm2-pin {
+ pwmpdm2 {
+ pins = "mfio75";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm3_pin: pwmpdm3-pin {
+ pwmpdm3 {
+ pins = "mfio76";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ dac_clk_pin: dac-clk-pin {
+ pin_dac_clk: dac-clk {
+ pins = "mfio45";
+ function = "i2s_dac_clk";
+ drive-strength = <4>;
+ };
+ };
+
+ i2s_mclk_pin: i2s-mclk-pin {
+ pin_i2s_mclk: i2s-mclk {
+ pins = "mfio36";
+ function = "i2s_out";
+ drive-strength = <4>;
+ };
+ };
+
+ spdif_out_pin: spdif-out-pin {
+ spdif-out {
+ pins = "mfio61";
+ function = "spdif_out";
+ slew-rate = <1>;
+ drive-strength = <2>;
+ };
+ };
+
+ spdif_in_pin: spdif-in-pin {
+ spdif-in {
+ pins = "mfio62";
+ function = "spdif_in";
+ drive-strength = <2>;
+ };
+ };
+
+ i2s_out_pins: i2s-out-pins {
+ pins_i2s_out_clk: i2s-out-clk {
+ pins = "mfio37", "mfio38";
+ function = "i2s_out";
+ drive-strength = <4>;
+ };
+ pins_i2s_out: i2s-out {
+ pins = "mfio39", "mfio40",
+ "mfio41", "mfio42",
+ "mfio43", "mfio44";
+ function = "i2s_out";
+ drive-strength = <2>;
+ };
+ };
+
+ i2s_in_pins: i2s-in-pins {
+ i2s-in {
+ pins = "mfio47", "mfio48", "mfio49",
+ "mfio50", "mfio51", "mfio52",
+ "mfio53", "mfio54";
+ function = "i2s_in";
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ timer: timer@18102000 {
+ compatible = "img,pistachio-gptimer";
+ reg = <0x18102000 0x100>;
+ interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>,
+ <&cr_periph SYS_CLK_TIMER>;
+ clock-names = "fast", "sys";
+ img,cr-periph = <&cr_periph>;
+ };
+
+ wdt: watchdog@18102100 {
+ compatible = "img,pdc-wdt";
+ reg = <0x18102100 0x100>;
+ interrupts = <GIC_SHARED 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_WD>, <&cr_periph SYS_CLK_WD>;
+ clock-names = "wdt", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_WD_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_WD_DIV>;
+ assigned-clock-rates = <4000000>, <32768>;
+ };
+
+ ir: ir@18102200 {
+ compatible = "img,ir-rev1";
+ reg = <0x18102200 0x100>;
+ interrupts = <GIC_SHARED 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_IR>, <&cr_periph SYS_CLK_IR>;
+ clock-names = "core", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_IR_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_IR_DIV>;
+ assigned-clock-rates = <4000000>, <32768>;
+ pinctrl-0 = <&ir_pin>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ usb: usb@18120000 {
+ compatible = "snps,dwc2";
+ reg = <0x18120000 0x1c000>;
+ interrupts = <GIC_SHARED 49 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy>;
+ phy-names = "usb2-phy";
+ g-tx-fifo-size = <256 256 256 256>;
+ status = "disabled";
+ };
+
+ enet: ethernet@18140000 {
+ compatible = "snps,dwmac";
+ reg = <0x18140000 0x2000>;
+ interrupts = <GIC_SHARED 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clk_core CLK_ENET>, <&cr_periph SYS_CLK_ENET>;
+ clock-names = "stmmaceth", "pclk";
+ assigned-clocks = <&clk_core CLK_ENET_MUX>,
+ <&clk_core CLK_ENET_DIV>;
+ assigned-clock-parents = <&clk_core CLK_SYS_INTERNAL_DIV>;
+ assigned-clock-rates = <0>, <50000000>;
+ pinctrl-0 = <&enet_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ status = "disabled";
+ };
+
+ sdhost: mmc@18142000 {
+ compatible = "img,pistachio-dw-mshc";
+ reg = <0x18142000 0x400>;
+ interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SD_HOST>, <&cr_periph SYS_CLK_SD_HOST>;
+ clock-names = "ciu", "biu";
+ pinctrl-0 = <&sdhost_pins>;
+ pinctrl-names = "default";
+ fifo-depth = <0x20>;
+ num-slots = <1>;
+ clock-frequency = <50000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sram: sram@1b000000 {
+ compatible = "mmio-sram";
+ reg = <0x1b000000 0x10000>;
+ };
+
+ mdc: dma-controller@18143000 {
+ compatible = "img,pistachio-mdc-dma";
+ reg = <0x18143000 0x1000>;
+ interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cr_periph SYS_CLK_MDC>;
+ clock-names = "sys";
+
+ img,max-burst-multiplier = <16>;
+ img,cr-periph = <&cr_periph>;
+
+ #dma-cells = <3>;
+ };
+
+ clk_core: clk@18144000 {
+ compatible = "img,pistachio-clk", "syscon";
+ clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
+ <&cr_top EXT_CLK_ENET_IN>;
+ clock-names = "xtal", "audio_refclk_ext_gate",
+ "ext_enet_in_gate";
+ reg = <0x18144000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ clk_periph: clk@18144800 {
+ compatible = "img,pistachio-clk-periph";
+ reg = <0x18144800 0x1000>;
+ clocks = <&clk_core CLK_PERIPH_SYS>;
+ clock-names = "periph_sys_core";
+ #clock-cells = <1>;
+ };
+
+ cr_periph: clk@18148000 {
+ compatible = "img,pistachio-cr-periph", "syscon", "simple-bus";
+ reg = <0x18148000 0x1000>;
+ clocks = <&clk_periph PERIPH_CLK_SYS>;
+ clock-names = "sys";
+ #clock-cells = <1>;
+
+ pistachio_reset: reset-controller {
+ compatible = "img,pistachio-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ cr_top: clk@18149000 {
+ compatible = "img,pistachio-cr-top", "syscon";
+ reg = <0x18149000 0x200>;
+ #clock-cells = <1>;
+ };
+
+ hash: hash@18149600 {
+ compatible = "img,hash-accelerator";
+ reg = <0x18149600 0x100>, <0x18101100 0x4>;
+ interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 8 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_HASH>,
+ <&clk_periph PERIPH_CLK_ROM>;
+ clock-names = "sys", "hash";
+ };
+
+ gic: interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_core CLK_MIPS>;
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "img,pistachio-usb-phy";
+ clocks = <&clk_core CLK_USB_PHY>;
+ clock-names = "usb_phy";
+ assigned-clocks = <&clk_core CLK_USB_PHY_DIV>;
+ assigned-clock-rates = <50000000>;
+ img,refclk = <0x2>;
+ img,cr-top = <&cr_top>;
+ #phy-cells = <0>;
+ };
+
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <52000000>;
+ clock-output-names = "xtal";
+ };
+};
--
2.6.2
Add support for Imagination Technologies' Marduk board which is based
on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy
name and will be there for decades.
Documentation for this board can be found on
https://docs.creatordev.io/ci40/
This patch adds initial support for board with following peripherals:
* PWM based heartbeat LED
* GPIO based buttons
* SPI NOR flash on SPI1
* UART0 and UART1
* SD card
* Ethernet
* USB
* PWM
* ADC
* I2C
Signed-off-by: Rahul Bedarkar <[email protected]>
---
Changes in v2:
- Correct RAM size. It is 256MB instead of 128MB.
- Rename nodes pwm_leds -> leds and gpio_keys -> keys (Suggested by Rob Herring)
- Don't use '_' in node name for internal_dac_supply (Suggested by Rob Herring)
- Add part name in compatible string for spi-nor (Suggested by Rob Herring)
---
.../bindings/mips/img/pistachio-marduk.txt | 10 ++
MAINTAINERS | 6 +
arch/mips/boot/dts/img/Makefile | 9 ++
arch/mips/boot/dts/img/pistachio_marduk.dts | 163 +++++++++++++++++++++
4 files changed, 188 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
create mode 100644 arch/mips/boot/dts/img/Makefile
create mode 100644 arch/mips/boot/dts/img/pistachio_marduk.dts
diff --git a/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
new file mode 100644
index 0000000..2d5126d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
@@ -0,0 +1,10 @@
+Imagination Technologies' Pistachio SoC based Marduk Board
+==========================================================
+
+Compatible string must be "img,pistachio-marduk", "img,pistachio"
+
+Hardware and other related documentation is available at
+https://docs.creatordev.io/ci40/
+
+It is also known as Creator Ci40. Marduk is legacy name and will
+be there for decades.
diff --git a/MAINTAINERS b/MAINTAINERS
index 98bcf06..8e6c962b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7515,6 +7515,12 @@ W: http://www.kernel.org/doc/man-pages
L: [email protected]
S: Maintained
+MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
+M: Rahul Bedarkar <[email protected]>
+L: [email protected]
+S: Maintained
+F: arch/mips/boot/dts/img/pistachio_marduk.dts
+
MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER
M: Andrew Lunn <[email protected]>
M: Vivien Didelot <[email protected]>
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
new file mode 100644
index 0000000..69a65f0
--- /dev/null
+++ b/arch/mips/boot/dts/img/Makefile
@@ -0,0 +1,9 @@
+dtb-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts b/arch/mips/boot/dts/img/pistachio_marduk.dts
new file mode 100644
index 0000000..cf9cebd
--- /dev/null
+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * IMG Marduk board is also known as Creator Ci40.
+ */
+
+/dts-v1/;
+
+#include "pistachio.dtsi"
+
+/ {
+ model = "IMG Marduk (Creator Ci40)";
+ compatible = "img,pistachio-marduk", "img,pistachio";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ ethernet0 = &enet;
+ spi0 = &spfi0;
+ spi1 = &spfi1;
+ };
+
+ chosen {
+ bootargs = "root=/dev/sda1 rootwait ro lpj=723968";
+ stdout-path = "serial1:115200";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ reg_1v8: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "aux_adc_vref";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ internal_dac_supply: internal-dac-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "internal_dac_supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ leds {
+ compatible = "pwm-leds";
+ heartbeat {
+ label = "marduk:red:heartbeat";
+ pwms = <&pwm 3 300000>;
+ max-brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ button@1 {
+ label = "Button 1";
+ linux,code = <0x101>; /* BTN_1 */
+ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ };
+ button@2 {
+ label = "Button 2";
+ linux,code = <0x102>; /* BTN_2 */
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&internal_dac {
+ VDD-supply = <&internal_dac_supply>;
+};
+
+&spfi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>,
+ <&spim1_cs1_pin>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "spansion,s25fl016k", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ assigned-clock-rates = <114278400>, <1843200>;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&enet {
+ status = "okay";
+};
+
+&pin_enet {
+ drive-strength = <2>;
+};
+
+&pin_enet_phy_clk {
+ drive-strength = <2>;
+};
+
+&sdhost {
+ status = "okay";
+ bus-width = <4>;
+ disable-wp;
+};
+
+&pin_sdhost_cmd {
+ drive-strength = <2>;
+};
+
+&pin_sdhost_data {
+ drive-strength = <2>;
+};
+
+&pwm {
+ status = "okay";
+
+ pinctrl-0 = <&pwmpdm0_pin>, <&pwmpdm1_pin>, <&pwmpdm2_pin>,
+ <&pwmpdm3_pin>;
+ pinctrl-names = "default";
+};
+
+&adc {
+ status = "okay";
+ vref-supply = <®_1v8>;
+ adc-reserved-channels = <0x10>;
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+
+};
+
+&i2c3 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
--
2.6.2
On Fri, Oct 14, 2016 at 11:25:55AM +0530, Rahul Bedarkar wrote:
> Add support for Imagination Technologies' Marduk board which is based
> on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy
> name and will be there for decades.
>
> Documentation for this board can be found on
> https://docs.creatordev.io/ci40/
>
> This patch adds initial support for board with following peripherals:
>
> * PWM based heartbeat LED
> * GPIO based buttons
> * SPI NOR flash on SPI1
> * UART0 and UART1
> * SD card
> * Ethernet
> * USB
> * PWM
> * ADC
> * I2C
>
> Signed-off-by: Rahul Bedarkar <[email protected]>
> ---
> Changes in v2:
> - Correct RAM size. It is 256MB instead of 128MB.
> - Rename nodes pwm_leds -> leds and gpio_keys -> keys (Suggested by Rob Herring)
> - Don't use '_' in node name for internal_dac_supply (Suggested by Rob Herring)
> - Add part name in compatible string for spi-nor (Suggested by Rob Herring)
> ---
> .../bindings/mips/img/pistachio-marduk.txt | 10 ++
> MAINTAINERS | 6 +
> arch/mips/boot/dts/img/Makefile | 9 ++
> arch/mips/boot/dts/img/pistachio_marduk.dts | 163 +++++++++++++++++++++
> 4 files changed, 188 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
> create mode 100644 arch/mips/boot/dts/img/Makefile
> create mode 100644 arch/mips/boot/dts/img/pistachio_marduk.dts
Acked-by: Rob Herring <[email protected]>
Hi Rahul,
> -----Original Message-----
> From: Rahul Bedarkar
> Sent: 14 October 2016 06:56
> To: Ralf Baechle; Rob Herring; Mark Rutland; James Hartley
> Cc: [email protected]; [email protected]; linux-
> [email protected]; Rahul Bedarkar
> Subject: [PATCH v2 1/2] MIPS: DTS: add base device tree for Pistachio SoC
>
> Add support for the base Device Tree for Imagination Technologies'
> Pistachio SoC.
>
> This commit supports the following peripherals:
>
> * Clocks
> * Pinctrl and GPIO
> * UART
> * SPI
> * I2C
> * PWM
> * ADC
> * Watchdog
> * Ethernet
> * MMC
> * DMA engine
> * Crypto
> * I2S
> * SPDIF
> * Internal DAC
> * Timer
> * USB
> * IR
> * Interrupt Controller
>
> Signed-off-by: Rahul Bedarkar <[email protected]>
> ---
> Changes in v2:
> - No change
> ---
> MAINTAINERS | 2 +-
> arch/mips/boot/dts/img/pistachio.dtsi | 924
> ++++++++++++++++++++++++++++++++++
> 2 files changed, 925 insertions(+), 1 deletion(-) create mode 100644
> arch/mips/boot/dts/img/pistachio.dtsi
Thanks for putting this together Rahul.
Acked-by: James Hartley <[email protected]>
Hi Rahul,
> -----Original Message-----
> From: Rob Herring [mailto:[email protected]]
> Sent: 18 October 2016 15:14
> To: Rahul Bedarkar
> Cc: Ralf Baechle; Mark Rutland; James Hartley; [email protected];
> [email protected]; [email protected]
> Subject: Re: [PATCH v2 2/2] MIPS: DTS: img: add device tree for Marduk
> board
>
> On Fri, Oct 14, 2016 at 11:25:55AM +0530, Rahul Bedarkar wrote:
> > Add support for Imagination Technologies' Marduk board which is based
> > on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy
> > name and will be there for decades.
> >
> > Documentation for this board can be found on
> > https://docs.creatordev.io/ci40/
> >
> > This patch adds initial support for board with following peripherals:
> >
> > * PWM based heartbeat LED
> > * GPIO based buttons
> > * SPI NOR flash on SPI1
> > * UART0 and UART1
> > * SD card
> > * Ethernet
> > * USB
> > * PWM
> > * ADC
> > * I2C
> >
> > Signed-off-by: Rahul Bedarkar <[email protected]>
> > ---
> > Changes in v2:
> > - Correct RAM size. It is 256MB instead of 128MB.
> > - Rename nodes pwm_leds -> leds and gpio_keys -> keys (Suggested by
> Rob Herring)
> > - Don't use '_' in node name for internal_dac_supply (Suggested by Rob
> Herring)
> > - Add part name in compatible string for spi-nor (Suggested by Rob
> > Herring)
> > ---
> > .../bindings/mips/img/pistachio-marduk.txt | 10 ++
> > MAINTAINERS | 6 +
> > arch/mips/boot/dts/img/Makefile | 9 ++
> > arch/mips/boot/dts/img/pistachio_marduk.dts | 163
> +++++++++++++++++++++
> > 4 files changed, 188 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
> > create mode 100644 arch/mips/boot/dts/img/Makefile create mode
> > 100644 arch/mips/boot/dts/img/pistachio_marduk.dts
>
> Acked-by: Rob Herring <[email protected]>
Acked-by: James Hartley <[email protected]>