when i try to suspend my notebook i have problems with ide controller.
the copy lasts a lot and i get oops.
Stopping tasks: ==========================================|
Shrinking memory... done (22776 pages freed)
pnp: Device 00:08 disabled.
swsusp: Need to copy 30898 pages
ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI - using IRQ 14
eth0: Media Link Off
ACPI: PCI Interrupt 0000:00: 01.2[D] -> Link [LNKD] -> GSI 5 (level,
low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level,
low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level,
low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:01.6[B] -> Link [LNKB] -> GSI 5 (level,
low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.0 to 64
PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was
82100003, writing 82100007)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
PM: Writing back config space on device 0000:00:0a.1 at offset 1 (was
2100003, writing 82100007)
ACPI: PCI Interrupt 0000:00: 0a.1[B] -> Link [LNKC] -> GSI 5 (level,
low) -> IRQ 5
pnp: Device 00:08 activated.
pnp: Failed to activate device 00:0c.
pnp: Failed to activate device 00:0d.
irq 14: nobody cared (try booting with the "irqpoll" option)
<c012c987> __report_bad_irq+0x2b/0x69 <c012cb3d> note_interrupt+0x178/0x1a7
<c012c53d> handle_IRQ_event+0x22/0x4e <c012c5ce> __do_IRQ+0x65/0x8f
<c0104b2d> do_IRQ+0x19/0x24 <c01033da> common_interrupt+0x1a/0x20
<c0118f4b> __do_softirq+0x2c/0x7f <c0118fc0> do_softirq+0x22/0x26
<c0104b32> do_IRQ+0x1e/0x24 <c01033da> common_interrupt+0x1a/0x20
<c0214224> acpi_processor_idle+0x157/0x323 <c0101da2> cpu_idle+0x3a/0x4f
<c03b0635> start_kernel+0x29c/0x29e
handlers:
[<c0230301>] (ide_intr+0x0/0x16c)
Disabling IRQ #14
Restarting tasks... done
hda: dma_timer_expiry: dma status == 0x24
hda: DMA interrupt recovery
hda: lost interrupt
CPU0
0: 431861 XT-PIC timer
1: 638 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC yenta, ohci_hcd:usb1, ohci_hcd:usb2,
Trident Audio, SiS630, eth0
7: 0 XT-PIC parport0
8: 2 XT-PIC rtc
9: 1 XT-PIC acpi
11: 0 XT-PIC yenta
12: 10982 XT-PIC i8042
14: 200771 XT-PIC ide0
15: 26 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
PCI Fast Ethernet (rev 80)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
SiS PCI Audio Accelerator (rev 01)
00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
Controller (rev a0)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
PCI-to-PCI bridge (AGP)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
630/730 PCI/AGP VGA Display Adapter (rev 11)
I have another two problems too:
1) have to disable synaptics driver (editing sources) otherwise i get
kernel panic
2) dri accelleration is working no more after suspend. glxgears shows
a black window only.
i think i should open 2 different threads for the last two.
please CC me, i'm not subscribed.
--
Patrizio Bassi
http://www.patriziobassi.it
On Monday 28 August 2006 13:46, Patrizio Bassi wrote:
> when i try to suspend my notebook i have problems with ide controller.
> the copy lasts a lot and i get oops.
I haven't seen any patches related to SIS chipsets recently.
There is a chance the latest -mm will work, so you can try it (no warranty,
though). If not, please file a bug report at http://bugzilla.kernel.org
(with a Cc to [email protected]).
Greetings,
Rafael
> Stopping tasks: ==========================================|
> Shrinking memory... done (22776 pages freed)
> pnp: Device 00:08 disabled.
> swsusp: Need to copy 30898 pages
> ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI - using IRQ 14
> eth0: Media Link Off
> ACPI: PCI Interrupt 0000:00: 01.2[D] -> Link [LNKD] -> GSI 5 (level,
> low) -> IRQ 5
> ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level,
> low) -> IRQ 5
> ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level,
> low) -> IRQ 5
> ACPI: PCI Interrupt 0000:00:01.6[B] -> Link [LNKB] -> GSI 5 (level,
> low) -> IRQ 5
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was
> 82100003, writing 82100007)
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level,
> low) -> IRQ 11
> PM: Writing back config space on device 0000:00:0a.1 at offset 1 (was
> 2100003, writing 82100007)
> ACPI: PCI Interrupt 0000:00: 0a.1[B] -> Link [LNKC] -> GSI 5 (level,
> low) -> IRQ 5
> pnp: Device 00:08 activated.
> pnp: Failed to activate device 00:0c.
> pnp: Failed to activate device 00:0d.
> irq 14: nobody cared (try booting with the "irqpoll" option)
> <c012c987> __report_bad_irq+0x2b/0x69 <c012cb3d> note_interrupt+0x178/0x1a7
> <c012c53d> handle_IRQ_event+0x22/0x4e <c012c5ce> __do_IRQ+0x65/0x8f
> <c0104b2d> do_IRQ+0x19/0x24 <c01033da> common_interrupt+0x1a/0x20
> <c0118f4b> __do_softirq+0x2c/0x7f <c0118fc0> do_softirq+0x22/0x26
> <c0104b32> do_IRQ+0x1e/0x24 <c01033da> common_interrupt+0x1a/0x20
> <c0214224> acpi_processor_idle+0x157/0x323 <c0101da2> cpu_idle+0x3a/0x4f
> <c03b0635> start_kernel+0x29c/0x29e
> handlers:
> [<c0230301>] (ide_intr+0x0/0x16c)
> Disabling IRQ #14
> Restarting tasks... done
> hda: dma_timer_expiry: dma status == 0x24
> hda: DMA interrupt recovery
> hda: lost interrupt
>
> CPU0
> 0: 431861 XT-PIC timer
> 1: 638 XT-PIC i8042
> 2: 0 XT-PIC cascade
> 5: 0 XT-PIC yenta, ohci_hcd:usb1, ohci_hcd:usb2,
> Trident Audio, SiS630, eth0
> 7: 0 XT-PIC parport0
> 8: 2 XT-PIC rtc
> 9: 1 XT-PIC acpi
> 11: 0 XT-PIC yenta
> 12: 10982 XT-PIC i8042
> 14: 200771 XT-PIC ide0
> 15: 26 XT-PIC ide1
> NMI: 0
> LOC: 0
> ERR: 0
> MIS: 0
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
> PCI Fast Ethernet (rev 80)
> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> Controller (rev 07)
> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> Controller (rev 07)
> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
> SiS PCI Audio Accelerator (rev 01)
> 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
> Controller (rev a0)
> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
> PCI-to-PCI bridge (AGP)
> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>
>
>
> I have another two problems too:
> 1) have to disable synaptics driver (editing sources) otherwise i get
> kernel panic
> 2) dri accelleration is working no more after suspend. glxgears shows
> a black window only.
>
> i think i should open 2 different threads for the last two.
>
> please CC me, i'm not subscribed.
>
>
--
You never change things by fighting the existing reality.
R. Buckminster Fuller
2006/8/29, Rafael J. Wysocki <[email protected]>:
> On Monday 28 August 2006 13:46, Patrizio Bassi wrote:
> > when i try to suspend my notebook i have problems with ide controller.
> > the copy lasts a lot and i get oops.
>
> I haven't seen any patches related to SIS chipsets recently.
>
> There is a chance the latest -mm will work, so you can try it (no warranty,
> though). If not, please file a bug report at http://bugzilla.kernel.org
> (with a Cc to [email protected]).
do you mean the .18-mm sources i guess, not the .17 ones.
Ok, i'll try as soon as possibile.
>
> Greetings,
> Rafael
>
>
> > Stopping tasks: ==========================================|
> > Shrinking memory... done (22776 pages freed)
> > pnp: Device 00:08 disabled.
> > swsusp: Need to copy 30898 pages
> > ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI - using IRQ 14
> > eth0: Media Link Off
> > ACPI: PCI Interrupt 0000:00: 01.2[D] -> Link [LNKD] -> GSI 5 (level,
> > low) -> IRQ 5
> > ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level,
> > low) -> IRQ 5
> > ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level,
> > low) -> IRQ 5
> > ACPI: PCI Interrupt 0000:00:01.6[B] -> Link [LNKB] -> GSI 5 (level,
> > low) -> IRQ 5
> > PCI: Setting latency timer of device 0000:00:02.0 to 64
> > PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was
> > 82100003, writing 82100007)
> > ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level,
> > low) -> IRQ 11
> > PM: Writing back config space on device 0000:00:0a.1 at offset 1 (was
> > 2100003, writing 82100007)
> > ACPI: PCI Interrupt 0000:00: 0a.1[B] -> Link [LNKC] -> GSI 5 (level,
> > low) -> IRQ 5
> > pnp: Device 00:08 activated.
> > pnp: Failed to activate device 00:0c.
> > pnp: Failed to activate device 00:0d.
> > irq 14: nobody cared (try booting with the "irqpoll" option)
> > <c012c987> __report_bad_irq+0x2b/0x69 <c012cb3d> note_interrupt+0x178/0x1a7
> > <c012c53d> handle_IRQ_event+0x22/0x4e <c012c5ce> __do_IRQ+0x65/0x8f
> > <c0104b2d> do_IRQ+0x19/0x24 <c01033da> common_interrupt+0x1a/0x20
> > <c0118f4b> __do_softirq+0x2c/0x7f <c0118fc0> do_softirq+0x22/0x26
> > <c0104b32> do_IRQ+0x1e/0x24 <c01033da> common_interrupt+0x1a/0x20
> > <c0214224> acpi_processor_idle+0x157/0x323 <c0101da2> cpu_idle+0x3a/0x4f
> > <c03b0635> start_kernel+0x29c/0x29e
> > handlers:
> > [<c0230301>] (ide_intr+0x0/0x16c)
> > Disabling IRQ #14
> > Restarting tasks... done
> > hda: dma_timer_expiry: dma status == 0x24
> > hda: DMA interrupt recovery
> > hda: lost interrupt
> >
> > CPU0
> > 0: 431861 XT-PIC timer
> > 1: 638 XT-PIC i8042
> > 2: 0 XT-PIC cascade
> > 5: 0 XT-PIC yenta, ohci_hcd:usb1, ohci_hcd:usb2,
> > Trident Audio, SiS630, eth0
> > 7: 0 XT-PIC parport0
> > 8: 2 XT-PIC rtc
> > 9: 1 XT-PIC acpi
> > 11: 0 XT-PIC yenta
> > 12: 10982 XT-PIC i8042
> > 14: 200771 XT-PIC ide0
> > 15: 26 XT-PIC ide1
> > NMI: 0
> > LOC: 0
> > ERR: 0
> > MIS: 0
> > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
> > 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
> > 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
> > 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
> > PCI Fast Ethernet (rev 80)
> > 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> > Controller (rev 07)
> > 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> > Controller (rev 07)
> > 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
> > SiS PCI Audio Accelerator (rev 01)
> > 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
> > Controller (rev a0)
> > 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
> > PCI-to-PCI bridge (AGP)
> > 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> > 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> > 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
> > 630/730 PCI/AGP VGA Display Adapter (rev 11)
> >
> >
> >
> > I have another two problems too:
> > 1) have to disable synaptics driver (editing sources) otherwise i get
> > kernel panic
> > 2) dri accelleration is working no more after suspend. glxgears shows
> > a black window only.
> >
> > i think i should open 2 different threads for the last two.
> >
> > please CC me, i'm not subscribed.
> >
> >
>
> --
> You never change things by fighting the existing reality.
> R. Buckminster Fuller
>
--
Patrizio Bassi
http://www.patriziobassi.it
2006/8/29, Patrizio Bassi <[email protected]>:
> 2006/8/29, Rafael J. Wysocki <[email protected]>:
> > On Monday 28 August 2006 13:46, Patrizio Bassi wrote:
> > > when i try to suspend my notebook i have problems with ide controller.
> > > the copy lasts a lot and i get oops.
> >
> > I haven't seen any patches related to SIS chipsets recently.
> >
> > There is a chance the latest -mm will work, so you can try it (no warranty,
> > though). If not, please file a bug report at http://bugzilla.kernel.org
> > (with a Cc to [email protected]).
>
>
> do you mean the .18-mm sources i guess, not the .17 ones.
>
> Ok, i'll try as soon as possibile.
>
>
>
> >
> > Greetings,
> > Rafael
> >
> >
> > > Stopping tasks: ==========================================|
> > > Shrinking memory... done (22776 pages freed)
> > > pnp: Device 00:08 disabled.
> > > swsusp: Need to copy 30898 pages
> > > ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI - using IRQ 14
> > > eth0: Media Link Off
> > > ACPI: PCI Interrupt 0000:00: 01.2[D] -> Link [LNKD] -> GSI 5 (level,
> > > low) -> IRQ 5
> > > ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level,
> > > low) -> IRQ 5
> > > ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level,
> > > low) -> IRQ 5
> > > ACPI: PCI Interrupt 0000:00:01.6[B] -> Link [LNKB] -> GSI 5 (level,
> > > low) -> IRQ 5
> > > PCI: Setting latency timer of device 0000:00:02.0 to 64
> > > PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was
> > > 82100003, writing 82100007)
> > > ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level,
> > > low) -> IRQ 11
> > > PM: Writing back config space on device 0000:00:0a.1 at offset 1 (was
> > > 2100003, writing 82100007)
> > > ACPI: PCI Interrupt 0000:00: 0a.1[B] -> Link [LNKC] -> GSI 5 (level,
> > > low) -> IRQ 5
> > > pnp: Device 00:08 activated.
> > > pnp: Failed to activate device 00:0c.
> > > pnp: Failed to activate device 00:0d.
> > > irq 14: nobody cared (try booting with the "irqpoll" option)
> > > <c012c987> __report_bad_irq+0x2b/0x69 <c012cb3d> note_interrupt+0x178/0x1a7
> > > <c012c53d> handle_IRQ_event+0x22/0x4e <c012c5ce> __do_IRQ+0x65/0x8f
> > > <c0104b2d> do_IRQ+0x19/0x24 <c01033da> common_interrupt+0x1a/0x20
> > > <c0118f4b> __do_softirq+0x2c/0x7f <c0118fc0> do_softirq+0x22/0x26
> > > <c0104b32> do_IRQ+0x1e/0x24 <c01033da> common_interrupt+0x1a/0x20
> > > <c0214224> acpi_processor_idle+0x157/0x323 <c0101da2> cpu_idle+0x3a/0x4f
> > > <c03b0635> start_kernel+0x29c/0x29e
> > > handlers:
> > > [<c0230301>] (ide_intr+0x0/0x16c)
> > > Disabling IRQ #14
> > > Restarting tasks... done
> > > hda: dma_timer_expiry: dma status == 0x24
> > > hda: DMA interrupt recovery
> > > hda: lost interrupt
> > >
> > > CPU0
> > > 0: 431861 XT-PIC timer
> > > 1: 638 XT-PIC i8042
> > > 2: 0 XT-PIC cascade
> > > 5: 0 XT-PIC yenta, ohci_hcd:usb1, ohci_hcd:usb2,
> > > Trident Audio, SiS630, eth0
> > > 7: 0 XT-PIC parport0
> > > 8: 2 XT-PIC rtc
> > > 9: 1 XT-PIC acpi
> > > 11: 0 XT-PIC yenta
> > > 12: 10982 XT-PIC i8042
> > > 14: 200771 XT-PIC ide0
> > > 15: 26 XT-PIC ide1
> > > NMI: 0
> > > LOC: 0
> > > ERR: 0
> > > MIS: 0
> > > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
> > > 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
> > > 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
> > > 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
> > > PCI Fast Ethernet (rev 80)
> > > 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> > > Controller (rev 07)
> > > 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> > > Controller (rev 07)
> > > 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
> > > SiS PCI Audio Accelerator (rev 01)
> > > 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
> > > Controller (rev a0)
> > > 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
> > > PCI-to-PCI bridge (AGP)
> > > 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> > > 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> > > 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
> > > 630/730 PCI/AGP VGA Display Adapter (rev 11)
> > >
> > >
> > >
> > > I have another two problems too:
> > > 1) have to disable synaptics driver (editing sources) otherwise i get
> > > kernel panic
> > > 2) dri accelleration is working no more after suspend. glxgears shows
> > > a black window only.
> > >
> > > i think i should open 2 different threads for the last two.
> > >
> > > please CC me, i'm not subscribed.
> > >
> > >
> >
> > --
> > You never change things by fighting the existing reality.
> > R. Buckminster Fuller
> >
i just tested 2.6.18-rc4-mm3.
as soon as i ask for suspending i get a black screen.
waiting for lots of time...something like 1 min i see:
Disabling Interrupt #14
and after, even waiting some means...nothing more.
2.6.18-rc5 gives me a panic:
http://www.patriziobassi.it/b.jpg
i see the same like, but the interrupt is disabled immediatly, without
waiting for a long time as rc4-mm3.
and now it seems to crash due to the synaptics problem i announced in
my first mail.
maybe fixing that may allow me to suspend.
Ready to test patches!
(please always CC me, i'm not subscribed)
ps. my config
http://www.patriziobassi.it/config
--
Patrizio Bassi
http://www.patriziobassi.it
On Wednesday 30 August 2006 08:58, Patrizio Bassi wrote:
> 2006/8/29, Patrizio Bassi <[email protected]>:
> > 2006/8/29, Rafael J. Wysocki <[email protected]>:
> > > On Monday 28 August 2006 13:46, Patrizio Bassi wrote:
> > > > when i try to suspend my notebook i have problems with ide controller.
> > > > the copy lasts a lot and i get oops.
> > >
> > > I haven't seen any patches related to SIS chipsets recently.
> > >
> > > There is a chance the latest -mm will work, so you can try it (no warranty,
> > > though). If not, please file a bug report at http://bugzilla.kernel.org
> > > (with a Cc to [email protected]).
> >
> >
> > do you mean the .18-mm sources i guess, not the .17 ones.
> >
> > Ok, i'll try as soon as possibile.
]--snip--[
> i just tested 2.6.18-rc4-mm3.
>
> as soon as i ask for suspending i get a black screen.
> waiting for lots of time...something like 1 min i see:
>
> Disabling Interrupt #14
> and after, even waiting some means...nothing more.
Please file a report at http://bugzilla.kernel.org like I said previously.
I'm afraid there's no quick fix for you right now.
Greetings,
Rafael
--
You never change things by fighting the existing reality.
R. Buckminster Fuller
2006/8/30, Rafael J. Wysocki <[email protected]>:
> On Wednesday 30 August 2006 08:58, Patrizio Bassi wrote:
> > 2006/8/29, Patrizio Bassi <[email protected]>:
> > > 2006/8/29, Rafael J. Wysocki <[email protected]>:
> > > > On Monday 28 August 2006 13:46, Patrizio Bassi wrote:
> > > > > when i try to suspend my notebook i have problems with ide controller.
> > > > > the copy lasts a lot and i get oops.
> > > >
> > > > I haven't seen any patches related to SIS chipsets recently.
> > > >
> > > > There is a chance the latest -mm will work, so you can try it (no warranty,
> > > > though). If not, please file a bug report at http://bugzilla.kernel.org
> > > > (with a Cc to [email protected]).
> > >
> > >
> > > do you mean the .18-mm sources i guess, not the .17 ones.
> > >
> > > Ok, i'll try as soon as possibile.
>
> ]--snip--[
> > i just tested 2.6.18-rc4-mm3.
> >
> > as soon as i ask for suspending i get a black screen.
> > waiting for lots of time...something like 1 min i see:
> >
> > Disabling Interrupt #14
> > and after, even waiting some means...nothing more.
>
> Please file a report at http://bugzilla.kernel.org like I said previously.
>
> I'm afraid there's no quick fix for you right now.
>
> Greetings,
> Rafael
>
>
i'll fill a bug, but i feel that synaptics bug may be the blocking problem.
Maybe fixing that (same problem in .17 sources too) may "unlock" the
suspending procedure too.
Some work for input team so. ihmo.
Thanks
--
Patrizio Bassi
http://www.patriziobassi.it
2006/8/30, Patrizio Bassi <[email protected]>:
> 2006/8/30, Rafael J. Wysocki <[email protected]>:
> > On Wednesday 30 August 2006 08:58, Patrizio Bassi wrote:
> > > 2006/8/29, Patrizio Bassi <[email protected]>:
> > > > 2006/8/29, Rafael J. Wysocki <[email protected]>:
> > > > > On Monday 28 August 2006 13:46, Patrizio Bassi wrote:
> > > > > > when i try to suspend my notebook i have problems with ide controller.
> > > > > > the copy lasts a lot and i get oops.
> > > > >
> > > > > I haven't seen any patches related to SIS chipsets recently.
> > > > >
> > > > > There is a chance the latest -mm will work, so you can try it (no warranty,
> > > > > though). If not, please file a bug report at http://bugzilla.kernel.org
> > > > > (with a Cc to [email protected]).
> > > >
> > > >
> > > > do you mean the .18-mm sources i guess, not the .17 ones.
> > > >
> > > > Ok, i'll try as soon as possibile.
> >
> > ]--snip--[
> > > i just tested 2.6.18-rc4-mm3.
> > >
> > > as soon as i ask for suspending i get a black screen.
> > > waiting for lots of time...something like 1 min i see:
> > >
> > > Disabling Interrupt #14
> > > and after, even waiting some means...nothing more.
> >
> > Please file a report at http://bugzilla.kernel.org like I said previously.
> >
> > I'm afraid there's no quick fix for you right now.
> >
> > Greetings,
> > Rafael
> >
> >
>
> i'll fill a bug, but i feel that synaptics bug may be the blocking problem.
> Maybe fixing that (same problem in .17 sources too) may "unlock" the
> suspending procedure too.
>
> Some work for input team so. ihmo.
>
> Thanks
>
>
just opened
http://bugzilla.kernel.org/show_bug.cgi?id=7077
Bye
--
Patrizio Bassi
http://www.patriziobassi.it
