Only SYSFW has control of SA3UL power.
From SYSFW 08.04.00.002, for security reasons, device ID for power
management of SA3UL has been removed.
"power-domains" property in crypto node tries to access
the SA3UL, for which it gets NACK and hence, SA3UL driver doesn't
probe properly.
Fixes: 8af893654c02 ("arm64: dts: ti: k3-am62-main: Enable crypto accelerator")
Signed-off-by: Kamlesh Gurudasani <[email protected]>
---
v2 changes:
-make commit message clearer
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index b3e4857bbbe4..18a6e9ffaf58 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -174,7 +174,6 @@ k3_reset: reset-controller {
crypto: crypto@40900000 {
compatible = "ti,am62-sa3ul";
reg = <0x00 0x40900000 0x00 0x1200>;
- power-domains = <&k3_pds 70 TI_SCI_PD_SHARED>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
---
base-commit: 53ab6975c12d1ad86c599a8927e8c698b144d669
change-id: 20230614-sa3ul-cb4bd1bb4d08
Best regards,
--
Kamlesh Gurudasani <[email protected]>
On 14/06/23 15:16, Kamlesh Gurudasani wrote:
> Only SYSFW has control of SA3UL power.
> From SYSFW 08.04.00.002, for security reasons, device ID for power
> management of SA3UL has been removed.
>
> "power-domains" property in crypto node tries to access
> the SA3UL, for which it gets NACK and hence, SA3UL driver doesn't
> probe properly.
>
> Fixes: 8af893654c02 ("arm64: dts: ti: k3-am62-main: Enable crypto accelerator")
>
> Signed-off-by: Kamlesh Gurudasani <[email protected]>
> ---
> v2 changes:
> -make commit message clearer
> ---
> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> index b3e4857bbbe4..18a6e9ffaf58 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -174,7 +174,6 @@ k3_reset: reset-controller {
> crypto: crypto@40900000 {
> compatible = "ti,am62-sa3ul";
> reg = <0x00 0x40900000 0x00 0x1200>;
> - power-domains = <&k3_pds 70 TI_SCI_PD_SHARED>;
Per Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml this is a
required property. This would need binding update to make power-domains
optional for certain compatibles.
> #address-cells = <2>;
> #size-cells = <2>;
> ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
>
> ---
> base-commit: 53ab6975c12d1ad86c599a8927e8c698b144d669
> change-id: 20230614-sa3ul-cb4bd1bb4d08
>
> Best regards,
--
Regards
Vignesh