The TLMM gpio74 is also used to communicate with the secure NFC
on-board module, some variants of the SM8650-MTP board requires
this GPIO to be dedicated to the secure firmware and set reserved
in order to successfully initialize the TLMM GPIOs from HLOS (Linux).
On the other boards this GPIO is unused so it's still safe to mark
the GPIO as reserved.
Fixes: 6fbdb3c1fac7 ("arm64: dts: qcom: sm8650: add initial SM8650 MTP dts")
Reported-by: Georgi Djakov <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index 9d916edb1c73..be133a3d5cbe 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -622,7 +622,7 @@ right_spkr: speaker@0,1 {
&tlmm {
/* Reserved I/Os for NFC */
- gpio-reserved-ranges = <32 8>;
+ gpio-reserved-ranges = <32 8>, <74 1>;
disp0_reset_n_active: disp0-reset-n-active-state {
pins = "gpio133";
--
2.34.1
On 1/11/24 17:58, Neil Armstrong wrote:
> The TLMM gpio74 is also used to communicate with the secure NFC
> on-board module, some variants of the SM8650-MTP board requires
> this GPIO to be dedicated to the secure firmware and set reserved
> in order to successfully initialize the TLMM GPIOs from HLOS (Linux).
> On the other boards this GPIO is unused so it's still safe to mark
> the GPIO as reserved.
>
> Fixes: 6fbdb3c1fac7 ("arm64: dts: qcom: sm8650: add initial SM8650 MTP dts")
> Reported-by: Georgi Djakov <[email protected]>
> Signed-off-by: Neil Armstrong <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
On 1/11/2024 6:58 PM, Neil Armstrong wrote:
> The TLMM gpio74 is also used to communicate with the secure NFC
> on-board module, some variants of the SM8650-MTP board requires
> this GPIO to be dedicated to the secure firmware and set reserved
> in order to successfully initialize the TLMM GPIOs from HLOS (Linux).
> On the other boards this GPIO is unused so it's still safe to mark
> the GPIO as reserved.
>
> Fixes: 6fbdb3c1fac7 ("arm64: dts: qcom: sm8650: add initial SM8650 MTP dts")
> Reported-by: Georgi Djakov <[email protected]>
> Signed-off-by: Neil Armstrong <[email protected]>
The SM8650-MTP board boots successfully with this patch. Thanks Neil!
Tested-by: Georgi Djakov <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> index 9d916edb1c73..be133a3d5cbe 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> @@ -622,7 +622,7 @@ right_spkr: speaker@0,1 {
>
> &tlmm {
> /* Reserved I/Os for NFC */
> - gpio-reserved-ranges = <32 8>;
> + gpio-reserved-ranges = <32 8>, <74 1>;
>
> disp0_reset_n_active: disp0-reset-n-active-state {
> pins = "gpio133";
>