On 2020-03-14 15:13, Rocky Liao wrote:
> This patch adds support for QCA6390, including the devicetree and acpi
> compatible hwid matching, and patch/nvm downloading.
>
> Signed-off-by: Rocky Liao <[email protected]>
> ---
> drivers/bluetooth/btqca.c | 44 +++++++++++++++++++++++++++++++----
> drivers/bluetooth/btqca.h | 8 +++++++
> drivers/bluetooth/hci_qca.c | 46 +++++++++++++++++++++++++++++++------
> 3 files changed, 86 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index a16845c0751d..ca126e499c58 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -14,6 +14,9 @@
>
> #define VERSION "0.1"
>
> +#define QCA_IS_3991_6390(soc_type) \
> + (soc_type == QCA_WCN3991 || soc_type == QCA_QCA6390)
> +
[Bala]: Why don't we do >= QCA_WCN3991 (mostly both the devices support
same features)
> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> enum qca_btsoc_type soc_type)
> {
> @@ -32,7 +35,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
> *soc_version,
> * VSE event. WCN3991 sends version command response as a payload to
> * command complete event.
> */
> - if (soc_type == QCA_WCN3991) {
> + if (QCA_IS_3991_6390(soc_type)) {
> event_type = 0;
> rlen += 1;
> rtype = EDL_PATCH_VER_REQ_CMD;
> @@ -69,7 +72,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
> *soc_version,
> goto out;
> }
>
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> memmove(&edl->data, &edl->data[1], sizeof(*ver));
>
> ver = (struct qca_btsoc_version *)(edl->data);
> @@ -138,6 +141,29 @@ int qca_send_pre_shutdown_cmd(struct hci_dev
> *hdev)
> }
> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>
> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
> +{
> + struct sk_buff *skb;
> + int err;
> + const u8 param[2] = {0x14, 0x01};
[Bala]: advisable to use MACRO's
> +
> + bt_dev_dbg(hdev, "QCA enhanced log enable cmd");
> +
> + skb = __hci_cmd_sync_ev(hdev, QCA_ENHANCED_LOG_ENABLE_CMD, 2,
> + param, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
> +
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Enhanced log enable cmd failed (%d)", err);
> + return err;
> + }
> +
> + kfree_skb(skb);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(qca_send_enhancelog_enable_cmd);
> +
> static void qca_tlv_check_data(struct qca_fw_config *config,
> const struct firmware *fw, enum qca_btsoc_type soc_type)
> {
> @@ -217,7 +243,7 @@ static void qca_tlv_check_data(struct qca_fw_config
> *config,
> tlv_nvm->data[0] |= 0x80;
>
> /* UART Baud Rate */
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> tlv_nvm->data[1] = nvm_baud_rate;
> else
> tlv_nvm->data[2] = nvm_baud_rate;
> @@ -268,7 +294,7 @@ static int qca_tlv_send_segment(struct hci_dev
> *hdev, int seg_size,
> * VSE event. WCN3991 sends version command response as a payload to
> * command complete event.
> */
> - if (soc_type == QCA_WCN3991) {
> + if (QCA_IS_3991_6390(soc_type)) {
> event_type = 0;
> rlen = sizeof(*edl);
> rtype = EDL_PATCH_TLV_REQ_CMD;
> @@ -301,7 +327,7 @@ static int qca_tlv_send_segment(struct hci_dev
> *hdev, int seg_size,
> err = -EIO;
> }
>
> - if (soc_type == QCA_WCN3991)
> + if (QCA_IS_3991_6390(soc_type))
> goto out;
>
> tlv_resp = (struct tlv_seg_resp *)(edl->data);
> @@ -442,6 +468,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
> baudrate,
> (soc_ver & 0x0000000f);
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crbtfw%02x.tlv", rom_ver);
> + } else if (soc_type == QCA_QCA6390) {
> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
> + (soc_ver & 0x0000000f);
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/htbtfw%02x.tlv", rom_ver);
[Bala]: This part we need to rethink to having to optimize.
ROME use: rampatch<>.tlv
WCN399x: uses cr<>.tlv
QCA6390: uses ht
tomorrow if some new chipset comes, it uses different name again a we
need to handle this part.
i would suggest add this prefix to "qca_bluetooth_of_match"
which can be passed as argument
> } else {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/rampatch_%08x.bin", soc_ver);
> @@ -464,6 +495,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
> baudrate,
> else if (qca_is_wcn399x(soc_type))
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crnv%02x.bin", rom_ver);
> + else if (soc_type == QCA_QCA6390)
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/htnv%02x.bin", rom_ver);
> else
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/nvm_%08x.bin", soc_ver);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index e16a4d650597..bc703817c3d7 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -14,6 +14,7 @@
> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
> #define MAX_SIZE_PER_TLV_SEGMENT (243)
> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
> +#define QCA_ENHANCED_LOG_ENABLE_CMD (0xFC17)
>
> #define EDL_CMD_REQ_RES_EVT (0x00)
> #define EDL_PATCH_VER_RES_EVT (0x19)
> @@ -127,6 +128,7 @@ enum qca_btsoc_type {
> QCA_WCN3990,
> QCA_WCN3991,
> QCA_WCN3998,
> + QCA_QCA6390,
> };
>
> #if IS_ENABLED(CONFIG_BT_QCA)
> @@ -139,6 +141,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
> *soc_version,
> enum qca_btsoc_type);
> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev);
> static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
> {
> return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3991 ||
> @@ -178,4 +181,9 @@ static inline int qca_send_pre_shutdown_cmd(struct
> hci_dev *hdev)
> {
> return -EOPNOTSUPP;
> }
> +
> +static inline int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
> +{
> + return -EOPNOTSUPP;
> +}
> #endif
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 439392b1c043..0176264b0828 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -26,6 +26,7 @@
> #include <linux/mod_devicetable.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/acpi.h>
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> #include <linux/serdev.h>
> @@ -1596,7 +1597,7 @@ static int qca_setup(struct hci_uart *hu)
> set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>
> bt_dev_info(hdev, "setting up %s",
> - qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
> + qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");
>
> retry:
> ret = qca_power_on(hdev);
> @@ -1639,6 +1640,12 @@ static int qca_setup(struct hci_uart *hu)
> qca_debugfs_init(hdev);
> hu->hdev->hw_error = qca_hw_error;
> hu->hdev->cmd_timeout = qca_cmd_timeout;
> +
> + /* QCA6390 FW doesn't enable enhanced log by default
> + * need to send VSC to enable it
> + */
> + if (soc_type == QCA_QCA6390)
> + qca_send_enhancelog_enable_cmd(hdev);
> } else if (ret == -ENOENT) {
> /* No patch/nvm-config found, run with original fw/config */
> ret = 0;
> @@ -1665,10 +1672,10 @@ static int qca_setup(struct hci_uart *hu)
> }
>
> /* Setup bdaddr */
> - if (qca_is_wcn399x(soc_type))
> - hu->hdev->set_bdaddr = qca_set_bdaddr;
> - else
> + if (soc_type == QCA_ROME)
> hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> + else
> + hu->hdev->set_bdaddr = qca_set_bdaddr;
>
> return ret;
> }
> @@ -1721,6 +1728,11 @@ static const struct qca_vreg_data
> qca_soc_data_wcn3998 = {
> .num_vregs = 4,
> };
>
> +static const struct qca_vreg_data qca_soc_data_qca6390 = {
> + .soc_type = QCA_QCA6390,
> + .num_vregs = 0,
> +};
> +
> static void qca_power_shutdown(struct hci_uart *hu)
> {
> struct qca_serdev *qcadev;
> @@ -1764,7 +1776,7 @@ static int qca_power_off(struct hci_dev *hdev)
> enum qca_btsoc_type soc_type = qca_soc_type(hu);
>
> /* Stop sending shutdown command if soc crashes. */
> - if (qca_is_wcn399x(soc_type)
> + if (soc_type != QCA_ROME
> && qca->memdump_state == QCA_MEMDUMP_IDLE) {
> qca_send_pre_shutdown_cmd(hdev);
> usleep_range(8000, 10000);
> @@ -1900,7 +1912,11 @@ static int qca_serdev_probe(struct serdev_device
> *serdev)
> return err;
> }
> } else {
> - qcadev->btsoc_type = QCA_ROME;
> + if (data)
> + qcadev->btsoc_type = data->soc_type;
> + else
> + qcadev->btsoc_type = QCA_ROME;
> +
> qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
> GPIOD_OUT_LOW);
> if (!qcadev->bt_en) {
> @@ -2044,21 +2060,37 @@ static int __maybe_unused qca_resume(struct
> device *dev)
>
> static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
>
> +#ifdef CONFIG_OF
> static const struct of_device_id qca_bluetooth_of_match[] = {
> { .compatible = "qcom,qca6174-bt" },
> + { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
> { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
> { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
> { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
> +#endif
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
> + { "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
> +#endif
> +
>
> static struct serdev_device_driver qca_serdev_driver = {
> .probe = qca_serdev_probe,
> .remove = qca_serdev_remove,
> .driver = {
> .name = "hci_uart_qca",
> - .of_match_table = qca_bluetooth_of_match,
> + .of_match_table = of_match_ptr(qca_bluetooth_of_match),
> + .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
> .pm = &qca_pm_ops,
> },
> };
在 2020-03-16 23:04，[email protected] 写道：
> On 2020-03-14 15:13, Rocky Liao wrote:
>> This patch adds support for QCA6390, including the devicetree and acpi
>> compatible hwid matching, and patch/nvm downloading.
>>
>> Signed-off-by: Rocky Liao <[email protected]>
>> ---
>> drivers/bluetooth/btqca.c | 44 +++++++++++++++++++++++++++++++----
>> drivers/bluetooth/btqca.h | 8 +++++++
>> drivers/bluetooth/hci_qca.c | 46
>> +++++++++++++++++++++++++++++++------
>> 3 files changed, 86 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index a16845c0751d..ca126e499c58 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -14,6 +14,9 @@
>>
>> #define VERSION "0.1"
>>
>> +#define QCA_IS_3991_6390(soc_type) \
>> + (soc_type == QCA_WCN3991 || soc_type == QCA_QCA6390)
>> +
>
> [Bala]: Why don't we do >= QCA_WCN3991 (mostly both the devices
> support same features)
>
OK
>> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> enum qca_btsoc_type soc_type)
>> {
>> @@ -32,7 +35,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> * VSE event. WCN3991 sends version command response as a payload to
>> * command complete event.
>> */
>> - if (soc_type == QCA_WCN3991) {
>> + if (QCA_IS_3991_6390(soc_type)) {
>> event_type = 0;
>> rlen += 1;
>> rtype = EDL_PATCH_VER_REQ_CMD;
>> @@ -69,7 +72,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> goto out;
>> }
>>
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> memmove(&edl->data, &edl->data[1], sizeof(*ver));
>>
>> ver = (struct qca_btsoc_version *)(edl->data);
>> @@ -138,6 +141,29 @@ int qca_send_pre_shutdown_cmd(struct hci_dev
>> *hdev)
>> }
>> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>>
>> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
>> +{
>> + struct sk_buff *skb;
>> + int err;
>> + const u8 param[2] = {0x14, 0x01};
>
> [Bala]: advisable to use MACRO's
>
This func will be removed, we don't need to enable enhanced log by
default. It can be done by hcitool whenever needed.
>> +
>> + bt_dev_dbg(hdev, "QCA enhanced log enable cmd");
>> +
>> + skb = __hci_cmd_sync_ev(hdev, QCA_ENHANCED_LOG_ENABLE_CMD, 2,
>> + param, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
>> +
>> + if (IS_ERR(skb)) {
>> + err = PTR_ERR(skb);
>> + bt_dev_err(hdev, "Enhanced log enable cmd failed (%d)", err);
>> + return err;
>> + }
>> +
>> + kfree_skb(skb);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(qca_send_enhancelog_enable_cmd);
>> +
>> static void qca_tlv_check_data(struct qca_fw_config *config,
>> const struct firmware *fw, enum qca_btsoc_type soc_type)
>> {
>> @@ -217,7 +243,7 @@ static void qca_tlv_check_data(struct
>> qca_fw_config *config,
>> tlv_nvm->data[0] |= 0x80;
>>
>> /* UART Baud Rate */
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> tlv_nvm->data[1] = nvm_baud_rate;
>> else
>> tlv_nvm->data[2] = nvm_baud_rate;
>> @@ -268,7 +294,7 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> * VSE event. WCN3991 sends version command response as a payload to
>> * command complete event.
>> */
>> - if (soc_type == QCA_WCN3991) {
>> + if (QCA_IS_3991_6390(soc_type)) {
>> event_type = 0;
>> rlen = sizeof(*edl);
>> rtype = EDL_PATCH_TLV_REQ_CMD;
>> @@ -301,7 +327,7 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> err = -EIO;
>> }
>>
>> - if (soc_type == QCA_WCN3991)
>> + if (QCA_IS_3991_6390(soc_type))
>> goto out;
>>
>> tlv_resp = (struct tlv_seg_resp *)(edl->data);
>> @@ -442,6 +468,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> (soc_ver & 0x0000000f);
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/crbtfw%02x.tlv", rom_ver);
>> + } else if (soc_type == QCA_QCA6390) {
>> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
>> + (soc_ver & 0x0000000f);
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/htbtfw%02x.tlv", rom_ver);
>
> [Bala]: This part we need to rethink to having to optimize.
>
> ROME use: rampatch<>.tlv
> WCN399x: uses cr<>.tlv
> QCA6390: uses ht
> tomorrow if some new chipset comes, it uses different name again a we
> need to handle this part.
> i would suggest add this prefix to "qca_bluetooth_of_match"
> which can be passed as argument
>
I would like to do this in a separate patch.
>> } else {
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/rampatch_%08x.bin", soc_ver);
>> @@ -464,6 +495,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> else if (qca_is_wcn399x(soc_type))
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/crnv%02x.bin", rom_ver);
>> + else if (soc_type == QCA_QCA6390)
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/htnv%02x.bin", rom_ver);
>> else
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/nvm_%08x.bin", soc_ver);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index e16a4d650597..bc703817c3d7 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -14,6 +14,7 @@
>> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
>> #define MAX_SIZE_PER_TLV_SEGMENT (243)
>> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
>> +#define QCA_ENHANCED_LOG_ENABLE_CMD (0xFC17)
>>
>> #define EDL_CMD_REQ_RES_EVT (0x00)
>> #define EDL_PATCH_VER_RES_EVT (0x19)
>> @@ -127,6 +128,7 @@ enum qca_btsoc_type {
>> QCA_WCN3990,
>> QCA_WCN3991,
>> QCA_WCN3998,
>> + QCA_QCA6390,
>> };
>>
>> #if IS_ENABLED(CONFIG_BT_QCA)
>> @@ -139,6 +141,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> enum qca_btsoc_type);
>> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
>> +int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev);
>> static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
>> {
>> return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3991 ||
>> @@ -178,4 +181,9 @@ static inline int qca_send_pre_shutdown_cmd(struct
>> hci_dev *hdev)
>> {
>> return -EOPNOTSUPP;
>> }
>> +
>> +static inline int qca_send_enhancelog_enable_cmd(struct hci_dev
>> *hdev)
>> +{
>> + return -EOPNOTSUPP;
>> +}
>> #endif
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 439392b1c043..0176264b0828 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -26,6 +26,7 @@
>> #include <linux/mod_devicetable.h>
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> +#include <linux/acpi.h>
>> #include <linux/platform_device.h>
>> #include <linux/regulator/consumer.h>
>> #include <linux/serdev.h>
>> @@ -1596,7 +1597,7 @@ static int qca_setup(struct hci_uart *hu)
>> set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>>
>> bt_dev_info(hdev, "setting up %s",
>> - qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
>> + qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");
>>
>> retry:
>> ret = qca_power_on(hdev);
>> @@ -1639,6 +1640,12 @@ static int qca_setup(struct hci_uart *hu)
>> qca_debugfs_init(hdev);
>> hu->hdev->hw_error = qca_hw_error;
>> hu->hdev->cmd_timeout = qca_cmd_timeout;
>> +
>> + /* QCA6390 FW doesn't enable enhanced log by default
>> + * need to send VSC to enable it
>> + */
>> + if (soc_type == QCA_QCA6390)
>> + qca_send_enhancelog_enable_cmd(hdev);
>> } else if (ret == -ENOENT) {
>> /* No patch/nvm-config found, run with original fw/config */
>> ret = 0;
>> @@ -1665,10 +1672,10 @@ static int qca_setup(struct hci_uart *hu)
>> }
>>
>> /* Setup bdaddr */
>> - if (qca_is_wcn399x(soc_type))
>> - hu->hdev->set_bdaddr = qca_set_bdaddr;
>> - else
>> + if (soc_type == QCA_ROME)
>> hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
>> + else
>> + hu->hdev->set_bdaddr = qca_set_bdaddr;
>>
>> return ret;
>> }
>> @@ -1721,6 +1728,11 @@ static const struct qca_vreg_data
>> qca_soc_data_wcn3998 = {
>> .num_vregs = 4,
>> };
>>
>> +static const struct qca_vreg_data qca_soc_data_qca6390 = {
>> + .soc_type = QCA_QCA6390,
>> + .num_vregs = 0,
>> +};
>> +
>> static void qca_power_shutdown(struct hci_uart *hu)
>> {
>> struct qca_serdev *qcadev;
>> @@ -1764,7 +1776,7 @@ static int qca_power_off(struct hci_dev *hdev)
>> enum qca_btsoc_type soc_type = qca_soc_type(hu);
>>
>> /* Stop sending shutdown command if soc crashes. */
>> - if (qca_is_wcn399x(soc_type)
>> + if (soc_type != QCA_ROME
>> && qca->memdump_state == QCA_MEMDUMP_IDLE) {
>> qca_send_pre_shutdown_cmd(hdev);
>> usleep_range(8000, 10000);
>> @@ -1900,7 +1912,11 @@ static int qca_serdev_probe(struct
>> serdev_device *serdev)
>> return err;
>> }
>> } else {
>> - qcadev->btsoc_type = QCA_ROME;
>> + if (data)
>> + qcadev->btsoc_type = data->soc_type;
>> + else
>> + qcadev->btsoc_type = QCA_ROME;
>> +
>> qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
>> GPIOD_OUT_LOW);
>> if (!qcadev->bt_en) {
>> @@ -2044,21 +2060,37 @@ static int __maybe_unused qca_resume(struct
>> device *dev)
>>
>> static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
>>
>> +#ifdef CONFIG_OF
>> static const struct of_device_id qca_bluetooth_of_match[] = {
>> { .compatible = "qcom,qca6174-bt" },
>> + { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
>> { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
>> { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
>> { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
>> { /* sentinel */ }
>> };
>> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
>> +#endif
>> +
>> +#ifdef CONFIG_ACPI
>> +static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
>> + { "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
>> +#endif
>> +
>>
>> static struct serdev_device_driver qca_serdev_driver = {
>> .probe = qca_serdev_probe,
>> .remove = qca_serdev_remove,
>> .driver = {
>> .name = "hci_uart_qca",
>> - .of_match_table = qca_bluetooth_of_match,
>> + .of_match_table = of_match_ptr(qca_bluetooth_of_match),
>> + .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
>> .pm = &qca_pm_ops,
>> },
>> };