This is the start of the stable review cycle for the 3.18.89 release.
There are 69 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed Dec 20 15:26:44 UTC 2017.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.89-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 3.18.89-rc1
Bin Liu <[email protected]>
usb: musb: da8xx: fix babble condition handling
Miaoqing Pan <[email protected]>
ath9k: fix tx99 potential info leak
Alexander Duyck <[email protected]>
macvlan: Only deliver one copy of the frame to the macvlan interface
Jan Kara <[email protected]>
udf: Avoid overflow when session starts at large offset
Dan Carpenter <[email protected]>
scsi: bfa: integer overflow in debugfs
Kurt Garloff <[email protected]>
scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry
NeilBrown <[email protected]>
raid5: Set R5_Expanded on parity devices as well as data.
Linus Walleij <[email protected]>
pinctrl: adi2: Fix Kconfig build problem
nixiaoming <[email protected]>
tty fix oops when rmmod 8250
Alex Williamson <[email protected]>
PCI: Detach driver before procfs & sysfs teardown on device remove
Brian Foster <[email protected]>
xfs: fix log block underflow during recovery cycle verification
tang.junhui <[email protected]>
bcache: fix wrong cache_misses statistics
Liang Chen <[email protected]>
bcache: explicitly destroy mutex while exiting
Bob Peterson <[email protected]>
GFS2: Take inode off order_write list when setting jdata flag
Daniel Lezcano <[email protected]>
thermal/drivers/step_wise: Fix temperature regulation misbehavior
Gao Feng <[email protected]>
ppp: Destroy the mutex when cleanup
Michał Mirosław <[email protected]>
clk: tegra: Fix cclk_lp divisor register
Jan Kara <[email protected]>
mm: Handle 0 flags in _calc_vm_trans() macro
Suzuki K Poulose <[email protected]>
arm-ccn: perf: Prevent module unload while PMU is in use
Jiang Yi <[email protected]>
target/file: Do not return error for UNMAP if length is zero
tangwenji <[email protected]>
target:fix condition return in core_pr_dump_initiator_port()
tangwenji <[email protected]>
iscsi-target: fix memory leak in lio_target_tiqn_addtpg()
Bart Van Assche <[email protected]>
target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
Markus Elfring <[email protected]>
platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
Christophe Leroy <[email protected]>
powerpc/ipic: Fix status get and status clear
William A. Kennington III <[email protected]>
powerpc/opal: Fix EBUSY bug in acquiring tokens
Shriya <[email protected]>
powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo
Qiang <[email protected]>
PCI/PME: Handle invalid data when reading Root Status
Christophe JAILLET <[email protected]>
video: fbdev: au1200fb: Return an error code if a memory allocation fails
Christophe JAILLET <[email protected]>
video: fbdev: au1200fb: Release some resources if a memory allocation fails
Ladislav Michl <[email protected]>
video: udlfb: Fix read EDID timeout
Geert Uytterhoeven <[email protected]>
fbdev: controlfb: Add missing modes to fix out of bounds access
Mike Christie <[email protected]>
target: Use system workqueue for ALUA transitions
Zygo Blaxell <[email protected]>
btrfs: add missing memset while reading compressed inline extents
Olga Kornievskaia <[email protected]>
NFSv4.1 respect server's max size in CREATE_SESSION
Daniel Borkmann <[email protected]>
perf symbols: Fix symbols__fixup_end heuristic for corner cases
David Howells <[email protected]>
afs: Fix afs_kill_pages()
David Howells <[email protected]>
afs: Fix page leak in afs_write_begin()
Marc Dionne <[email protected]>
afs: Populate and use client modification time
David Howells <[email protected]>
afs: Fix the maths in afs_fs_store_data()
David Howells <[email protected]>
afs: Flush outstanding writes when an fd is closed
Marc Dionne <[email protected]>
afs: Adjust mode bits processing
Marc Dionne <[email protected]>
afs: Populate group ID from vnode status
David Howells <[email protected]>
afs: Fix missing put_page()
Alex Deucher <[email protected]>
drm/radeon: reinstate oland workaround for sclk
Steven Rostedt (VMware) <[email protected]>
sched/deadline: Use deadline instead of period when calculating overflow
Alex Deucher <[email protected]>
drm/radeon/si: add dpm quirk for Oland
Stafford Horne <[email protected]>
openrisc: fix issue handling 8 byte get_user calls
Vlad Yasevich <[email protected]>
net: Resend IGMP memberships upon peer notification.
Matthias Kaehlcke <[email protected]>
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
Johan Hovold <[email protected]>
net: wimax/i2400m: fix NULL-deref at probe
Dmitry Torokhov <[email protected]>
Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list
NeilBrown <[email protected]>
NFSD: fix nfsd_reset_versions for NFSv4.
NeilBrown <[email protected]>
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
Doug Berger <[email protected]>
net: bcmgenet: Power up the internal PHY before probing the MII
Doug Berger <[email protected]>
net: bcmgenet: correct MIB access of UniMAC RUNT counters
Doug Berger <[email protected]>
net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
Javier Martinez Canillas <[email protected]>
usb: phy: isp1301: Add OF device ID table
Ilan peer <[email protected]>
mac80211: Fix addition of mesh configuration element
David Howells <[email protected]>
KEYS: Don't permit request_key() to construct a new keyring
David Jeffery <[email protected]>
Don't leak a key reference if request_key() tries to use a revoked keyring
Chandan Rajendra <[email protected]>
ext4: fix crash when a directory's i_size is too small
Mathias Nyman <[email protected]>
xhci: Don't add a virt_dev to the devs array before it's fully allocated
Shuah Khan <[email protected]>
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
Alan Stern <[email protected]>
USB: core: prevent malicious bNumInterfaces overflow
David Kozub <[email protected]>
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
NeilBrown <[email protected]>
autofs: fix careless error in recent commit
Eric Biggers <[email protected]>
crypto: salsa20 - fix blkcipher_walk API usage
Eric Biggers <[email protected]>
crypto: hmac - require that the underlying hash algorithm is unkeyed
-------------
Diffstat:
Makefile | 4 +-
arch/blackfin/Kconfig | 7 ++-
arch/blackfin/Kconfig.debug | 1 +
arch/openrisc/include/asm/uaccess.h | 2 +-
arch/powerpc/platforms/powernv/opal-async.c | 6 +-
arch/powerpc/platforms/powernv/setup.c | 2 +-
arch/powerpc/sysdev/ipic.c | 4 +-
arch/x86/crypto/salsa20_glue.c | 7 ---
crypto/hmac.c | 6 +-
crypto/salsa20_generic.c | 7 ---
crypto/shash.c | 5 +-
drivers/bus/arm-ccn.c | 1 +
drivers/clk/tegra/clk-tegra30.c | 2 +-
drivers/dma/dmaengine.c | 2 +
drivers/gpu/drm/radeon/si_dpm.c | 10 ++++
drivers/input/serio/i8042-x86ia64io.h | 7 +++
drivers/md/bcache/request.c | 6 +-
drivers/md/bcache/super.c | 6 +-
drivers/md/raid5.c | 5 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 79 ++++++++++++++++++++++----
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 10 +++-
drivers/net/macvlan.c | 2 +-
drivers/net/ppp/ppp_generic.c | 1 +
drivers/net/wimax/i2400m/usb.c | 3 +
drivers/net/wireless/ath/ath9k/tx99.c | 5 ++
drivers/pci/pcie/pme.c | 5 +-
drivers/pci/remove.c | 2 +-
drivers/pinctrl/Kconfig | 3 +-
drivers/platform/x86/sony-laptop.c | 14 +++--
drivers/scsi/bfa/bfad_debugfs.c | 5 +-
drivers/scsi/scsi_devinfo.c | 2 +-
drivers/target/iscsi/iscsi_target.c | 3 +-
drivers/target/iscsi/iscsi_target_configfs.c | 3 +-
drivers/target/target_core_alua.c | 8 +--
drivers/target/target_core_file.c | 4 ++
drivers/target/target_core_pr.c | 4 +-
drivers/thermal/step_wise.c | 11 ++--
drivers/usb/core/config.c | 4 +-
drivers/usb/host/xhci-mem.c | 15 +++--
drivers/usb/musb/da8xx.c | 10 +++-
drivers/usb/phy/phy-isp1301.c | 7 +++
drivers/usb/storage/unusual_devs.h | 7 +++
drivers/usb/storage/unusual_uas.h | 7 +++
drivers/usb/usbip/stub_tx.c | 7 +++
drivers/video/fbdev/au1200fb.c | 7 ++-
drivers/video/fbdev/controlfb.h | 2 +
drivers/video/fbdev/udlfb.c | 10 ++--
fs/afs/file.c | 1 +
fs/afs/fsclient.c | 20 +++----
fs/afs/inode.c | 4 +-
fs/afs/internal.h | 1 +
fs/afs/security.c | 7 ++-
fs/afs/write.c | 32 +++++++++--
fs/autofs4/waitq.c | 1 -
fs/btrfs/inode.c | 14 +++++
fs/ext4/namei.c | 4 ++
fs/gfs2/file.c | 4 +-
fs/nfs/nfs4client.c | 4 +-
fs/nfsd/nfssvc.c | 30 +++++-----
fs/proc/proc_tty.c | 3 +-
fs/udf/super.c | 2 +-
fs/xfs/xfs_log_recover.c | 2 +-
include/crypto/internal/hash.h | 8 +++
include/linux/mman.h | 3 +-
kernel/sched/deadline.c | 8 +--
net/core/dev.c | 1 +
net/mac80211/mesh.c | 2 -
security/keys/request_key.c | 4 ++
tools/perf/util/symbol.c | 2 +-
69 files changed, 352 insertions(+), 135 deletions(-)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit af3ff8045bbf3e32f1a448542e73abb4c8ceb6f1 upstream.
Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.
This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not. However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.
Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed. Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.
Here is a reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
int main()
{
int algfd;
struct sockaddr_alg addr = {
.salg_type = "hash",
.salg_name = "hmac(hmac(sha3-512-generic))",
};
char key[4096] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (const struct sockaddr *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
}
Here was the KASAN report from syzbot:
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline]
BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044
CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
memcpy include/linux/string.h:341 [inline]
sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
crypto_shash_update+0xcb/0x220 crypto/shash.c:109
shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
hmac_finup+0x182/0x330 crypto/hmac.c:152
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172
crypto_shash_digest+0xc4/0x120 crypto/shash.c:186
hmac_setkey+0x36a/0x690 crypto/hmac.c:66
crypto_shash_setkey+0xad/0x190 crypto/shash.c:64
shash_async_setkey+0x47/0x60 crypto/shash.c:207
crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200
hash_setkey+0x40/0x90 crypto/algif_hash.c:446
alg_setkey crypto/af_alg.c:221 [inline]
alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254
SYSC_setsockopt net/socket.c:1851 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1830
entry_SYSCALL_64_fastpath+0x1f/0x96
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/hmac.c | 6 +++++-
crypto/shash.c | 5 +++--
include/crypto/internal/hash.h | 8 ++++++++
3 files changed, 16 insertions(+), 3 deletions(-)
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -194,11 +194,15 @@ static int hmac_create(struct crypto_tem
salg = shash_attr_alg(tb[1], 0, 0);
if (IS_ERR(salg))
return PTR_ERR(salg);
+ alg = &salg->base;
+ /* The underlying hash algorithm must be unkeyed */
err = -EINVAL;
+ if (crypto_shash_alg_has_setkey(salg))
+ goto out_put_alg;
+
ds = salg->digestsize;
ss = salg->statesize;
- alg = &salg->base;
if (ds > alg->cra_blocksize ||
ss < alg->cra_blocksize)
goto out_put_alg;
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -24,11 +24,12 @@
static const struct crypto_type crypto_shash_type;
-static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
- unsigned int keylen)
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen)
{
return -ENOSYS;
}
+EXPORT_SYMBOL_GPL(shash_no_setkey);
static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen)
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -83,6 +83,14 @@ int ahash_register_instance(struct crypt
struct ahash_instance *inst);
void ahash_free_instance(struct crypto_instance *inst);
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen);
+
+static inline bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
+{
+ return alg->setkey != shash_no_setkey;
+}
+
int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
struct hash_alg_common *alg,
struct crypto_instance *inst);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Martinez Canillas <[email protected]>
[ Upstream commit fd567653bdb908009b650f079bfd4b63169e2ac4 ]
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/phy/phy-isp1301.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -32,6 +32,12 @@ static const struct i2c_device_id isp130
{ }
};
+static const struct of_device_id isp1301_of_match[] = {
+ {.compatible = "nxp,isp1301" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, isp1301_of_match);
+
static struct i2c_client *isp1301_i2c_client;
static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
@@ -129,6 +135,7 @@ static int isp1301_remove(struct i2c_cli
static struct i2c_driver isp1301_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = of_match_ptr(isp1301_of_match),
},
.probe = isp1301_probe,
.remove = isp1301_remove,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
[ Upstream commit 928c6fb3a9bfd6c5b287aa3465226add551c13c0 ]
Current code will return 1 if the version is supported,
and -1 if it isn't.
This is confusing and inconsistent with the one place where this
is used.
So change to return 1 if it is supported, and zero if not.
i.e. an error is never returned.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfssvc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -150,7 +150,8 @@ int nfsd_vers(int vers, enum vers_op cha
int nfsd_minorversion(u32 minorversion, enum vers_op change)
{
- if (minorversion > NFSD_SUPPORTED_MINOR_VERSION)
+ if (minorversion > NFSD_SUPPORTED_MINOR_VERSION &&
+ change != NFSD_AVAIL)
return -1;
switch(change) {
case NFSD_SET:
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Torokhov <[email protected]>
[ Upstream commit a4c2a13129f7c5bcf81704c06851601593303fd5 ]
TUXEDO BU1406 does not implement active multiplexing mode properly,
and takes around 550 ms in i8042_set_mux_mode(). Given that the
device does not have external AUX port, there is no downside in
disabling the MUX mode.
Reported-by: Paul Menzel <[email protected]>
Suggested-by: Vojtech Pavlik <[email protected]>
Reviewed-by: Marcos Paulo de Souza <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -514,6 +514,13 @@ static const struct dmi_system_id __init
DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
},
},
+ {
+ /* TUXEDO BU1406 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"),
+ },
+ },
{ }
};
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
[ Upstream commit 6e526fdff7be4f13b24f929a04c0e9ae6761291e ]
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
The endpoints are specifically dereferenced in the i2400m_bootrom_init
path during probe (e.g. in i2400mu_tx_bulk_out).
Fixes: f398e4240fce ("i2400m/USB: probe/disconnect, dev init/shutdown
and reset backends")
Cc: Inaky Perez-Gonzalez <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wimax/i2400m/usb.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -467,6 +467,9 @@ int i2400mu_probe(struct usb_interface *
struct i2400mu *i2400mu;
struct usb_device *usb_dev = interface_to_usbdev(iface);
+ if (iface->cur_altsetting->desc.bNumEndpoints < 4)
+ return -ENODEV;
+
if (usb_dev->speed != USB_SPEED_HIGH)
dev_err(dev, "device not connected as high speed\n");
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit ecaaab5649781c5a0effdaf298a925063020500e upstream.
When asked to encrypt or decrypt 0 bytes, both the generic and x86
implementations of Salsa20 crash in blkcipher_walk_done(), either when
doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)',
because walk->buffer and walk->page have not been initialized.
The bug is that Salsa20 is calling blkcipher_walk_done() even when
nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to
be called when a nonzero number of bytes have been provided.
The broken code is part of an optimization that tries to make only one
call to salsa20_encrypt_bytes() to process inputs that are not evenly
divisible by 64 bytes. To fix the bug, just remove this "optimization"
and use the blkcipher_walk API the same way all the other users do.
Reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
int algfd, reqfd;
struct sockaddr_alg addr = {
.salg_type = "skcipher",
.salg_name = "salsa20",
};
char key[16] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (void *)&addr, sizeof(addr));
reqfd = accept(algfd, 0, 0);
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
read(reqfd, key, sizeof(key));
}
Reported-by: syzbot <[email protected]>
Fixes: eb6f13eb9f81 ("[CRYPTO] salsa20_generic: Fix multi-page processing")
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/crypto/salsa20_glue.c | 7 -------
crypto/salsa20_generic.c | 7 -------
2 files changed, 14 deletions(-)
--- a/arch/x86/crypto/salsa20_glue.c
+++ b/arch/x86/crypto/salsa20_glue.c
@@ -59,13 +59,6 @@ static int encrypt(struct blkcipher_desc
salsa20_ivsetup(ctx, walk.iv);
- if (likely(walk.nbytes == nbytes))
- {
- salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
- walk.dst.virt.addr, nbytes);
- return blkcipher_walk_done(desc, &walk, 0);
- }
-
while (walk.nbytes >= 64) {
salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
walk.dst.virt.addr,
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -188,13 +188,6 @@ static int encrypt(struct blkcipher_desc
salsa20_ivsetup(ctx, walk.iv);
- if (likely(walk.nbytes == nbytes))
- {
- salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
- walk.src.virt.addr, nbytes);
- return blkcipher_walk_done(desc, &walk, 0);
- }
-
while (walk.nbytes >= 64) {
salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
walk.src.virt.addr,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit 48a4ff1c7bb5a32d2e396b03132d20d552c0eca7 upstream.
A malicious USB device with crafted descriptors can cause the kernel
to access unallocated memory by setting the bNumInterfaces value too
high in a configuration descriptor. Although the value is adjusted
during parsing, this adjustment is skipped in one of the error return
paths.
This patch prevents the problem by setting bNumInterfaces to 0
initially. The existing code already sets it to the proper value
after parsing is complete.
Signed-off-by: Alan Stern <[email protected]>
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/config.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -450,6 +450,9 @@ static int usb_parse_configuration(struc
unsigned iad_num = 0;
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
+ nintf = nintf_orig = config->desc.bNumInterfaces;
+ config->desc.bNumInterfaces = 0; // Adjusted later
+
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
config->desc.bLength < USB_DT_CONFIG_SIZE ||
config->desc.bLength > size) {
@@ -463,7 +466,6 @@ static int usb_parse_configuration(struc
buffer += config->desc.bLength;
size -= config->desc.bLength;
- nintf = nintf_orig = config->desc.bNumInterfaces;
if (nintf > USB_MAXINTERFACES) {
dev_warn(ddev, "config %d has too many interfaces: %d, "
"using maximum allowed: %d\n",
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chandan Rajendra <[email protected]>
commit 9d5afec6b8bd46d6ed821aa1579634437f58ef1f upstream.
On a ppc64 machine, when mounting a fuzzed ext2 image (generated by
fsfuzzer) the following call trace is seen,
VFS: brelse: Trying to free free buffer
WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40
.__brelse.part.6+0x20/0x40 (unreliable)
.ext4_find_entry+0x384/0x4f0
.ext4_lookup+0x84/0x250
.lookup_slow+0xdc/0x230
.walk_component+0x268/0x400
.path_lookupat+0xec/0x2d0
.filename_lookup+0x9c/0x1d0
.vfs_statx+0x98/0x140
.SyS_newfstatat+0x48/0x80
system_call+0x58/0x6c
This happens because the directory that ext4_find_entry() looks up has
inode->i_size that is less than the block size of the filesystem. This
causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not
reading any of the directory file's blocks. This renders the entries in
bh_use[] array to continue to have garbage data. buffer_uptodate() on
bh_use[0] can then return a zero value upon which brelse() function is
invoked.
This commit fixes the bug by returning -ENOENT when the directory file
has no associated blocks.
Reported-by: Abdul Haleem <[email protected]>
Signed-off-by: Chandan Rajendra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1244,6 +1244,10 @@ static struct buffer_head * ext4_find_en
"falling back\n"));
}
nblocks = dir->i_size >> EXT4_BLOCK_SIZE_BITS(sb);
+ if (!nblocks) {
+ ret = NULL;
+ goto cleanup_and_exit;
+ }
start = EXT4_I(dir)->i_dir_start_lookup;
if (start >= nblocks)
start = 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit ab94f5d0dd6fd82e7eeca5e7c8096eaea0a0261f ]
The inode timestamps should be set from the client time
in the status received from the server, rather than the
server time which is meant for internal server use.
Set AFS_SET_MTIME and populate the mtime for operations
that take an input status, such as file/dir creation
and StoreData. If an input time is not provided the
server will set the vnode times based on the current server
time.
In a situation where the server has some skew with the
client, this could lead to the client seeing a timestamp
in the future for a file that it just created or wrote.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/fsclient.c | 18 +++++++++---------
fs/afs/inode.c | 2 +-
2 files changed, 10 insertions(+), 10 deletions(-)
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -105,7 +105,7 @@ static void xdr_decode_AFSFetchStatus(co
vnode->vfs_inode.i_mode = mode;
}
- vnode->vfs_inode.i_ctime.tv_sec = status->mtime_server;
+ vnode->vfs_inode.i_ctime.tv_sec = status->mtime_client;
vnode->vfs_inode.i_mtime = vnode->vfs_inode.i_ctime;
vnode->vfs_inode.i_atime = vnode->vfs_inode.i_ctime;
vnode->vfs_inode.i_version = data_version;
@@ -703,8 +703,8 @@ int afs_fs_create(struct afs_server *ser
memset(bp, 0, padsz);
bp = (void *) bp + padsz;
}
- *bp++ = htonl(AFS_SET_MODE);
- *bp++ = 0; /* mtime */
+ *bp++ = htonl(AFS_SET_MODE | AFS_SET_MTIME);
+ *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
*bp++ = 0; /* owner */
*bp++ = 0; /* group */
*bp++ = htonl(mode & S_IALLUGO); /* unix mode */
@@ -981,8 +981,8 @@ int afs_fs_symlink(struct afs_server *se
memset(bp, 0, c_padsz);
bp = (void *) bp + c_padsz;
}
- *bp++ = htonl(AFS_SET_MODE);
- *bp++ = 0; /* mtime */
+ *bp++ = htonl(AFS_SET_MODE | AFS_SET_MTIME);
+ *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
*bp++ = 0; /* owner */
*bp++ = 0; /* group */
*bp++ = htonl(S_IRWXUGO); /* unix mode */
@@ -1192,8 +1192,8 @@ static int afs_fs_store_data64(struct af
*bp++ = htonl(vnode->fid.vnode);
*bp++ = htonl(vnode->fid.unique);
- *bp++ = 0; /* mask */
- *bp++ = 0; /* mtime */
+ *bp++ = htonl(AFS_SET_MTIME); /* mask */
+ *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
*bp++ = 0; /* owner */
*bp++ = 0; /* group */
*bp++ = 0; /* unix mode */
@@ -1269,8 +1269,8 @@ int afs_fs_store_data(struct afs_server
*bp++ = htonl(vnode->fid.vnode);
*bp++ = htonl(vnode->fid.unique);
- *bp++ = 0; /* mask */
- *bp++ = 0; /* mtime */
+ *bp++ = htonl(AFS_SET_MTIME); /* mask */
+ *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
*bp++ = 0; /* owner */
*bp++ = 0; /* group */
*bp++ = 0; /* unix mode */
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -71,7 +71,7 @@ static int afs_inode_map_status(struct a
inode->i_uid = vnode->status.owner;
inode->i_gid = vnode->status.group;
inode->i_size = vnode->status.size;
- inode->i_ctime.tv_sec = vnode->status.mtime_server;
+ inode->i_ctime.tv_sec = vnode->status.mtime_client;
inode->i_ctime.tv_nsec = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime;
inode->i_blocks = 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 6d06b0d25209c80e99c1e89700f1e09694a3766b ]
afs_write_begin() leaks a ref and a lock on a page if afs_fill_page()
fails. Fix the leak by unlocking and releasing the page in the error path.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/write.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -149,12 +149,12 @@ int afs_write_begin(struct file *file, s
kfree(candidate);
return -ENOMEM;
}
- *pagep = page;
- /* page won't leak in error case: it eventually gets cleaned off LRU */
if (!PageUptodate(page) && len != PAGE_CACHE_SIZE) {
ret = afs_fill_page(vnode, key, index << PAGE_CACHE_SHIFT, page);
if (ret < 0) {
+ unlock_page(page);
+ put_page(page);
kfree(candidate);
_leave(" = %d [prep]", ret);
return ret;
@@ -162,6 +162,9 @@ int afs_write_begin(struct file *file, s
SetPageUptodate(page);
}
+ /* page won't leak in error case: it eventually gets cleaned off LRU */
+ *pagep = page;
+
try_again:
spin_lock(&vnode->writeback_lock);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 7286a35e893176169b09715096a4aca557e2ccd2 ]
Fix afs_kill_pages() in two ways:
(1) If a writeback has been partially flushed, then if we try and kill the
pages it contains, some of them may no longer be undergoing writeback
and end_page_writeback() will assert.
Fix this by checking to see whether the page in question is actually
undergoing writeback before ending that writeback.
(2) The loop that scans for pages to kill doesn't increase the first page
index, and so the loop may not terminate, but it will try to process
the same pages over and over again.
Fix this by increasing the first page index to one after the last page
we processed.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/write.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -300,10 +300,14 @@ static void afs_kill_pages(struct afs_vn
ASSERTCMP(pv.nr, ==, count);
for (loop = 0; loop < count; loop++) {
- ClearPageUptodate(pv.pages[loop]);
+ struct page *page = pv.pages[loop];
+ ClearPageUptodate(page);
if (error)
- SetPageError(pv.pages[loop]);
- end_page_writeback(pv.pages[loop]);
+ SetPageError(page);
+ if (PageWriteback(page))
+ end_page_writeback(page);
+ if (page->index >= first)
+ first = page->index + 1;
}
__pagevec_release(&pv);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Christie <[email protected]>
[ Upstream commit 207ee84133c00a8a2a5bdec94df4a5b37d78881c ]
If tcmu-runner is processing a STPG and needs to change the kernel's
ALUA state then we cannot use the same work queue for task management
requests and ALUA transitions, because we could deadlock. The problem
occurs when a STPG times out before tcmu-runner is able to
call into target_tg_pt_gp_alua_access_state_store->
core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
queue_work. In this case, the tmr is on the work queue waiting for
the STPG to complete, but the STPG transition is now queued behind
the waiting tmr.
Note:
This bug will also be fixed by this patch:
http://www.spinics.net/lists/target-devel/msg14560.html
which switches the tmr code to use the system workqueues.
For both, I am not sure if we need a dedicated workqueue since
it is not a performance path and I do not think we need WQ_MEM_RECLAIM
to make forward progress to free up memory like the block layer does.
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_alua.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1126,13 +1126,11 @@ static int core_alua_do_transition_tg_pt
unsigned long transition_tmo;
transition_tmo = tg_pt_gp->tg_pt_gp_implicit_trans_secs * HZ;
- queue_delayed_work(tg_pt_gp->tg_pt_gp_dev->tmr_wq,
- &tg_pt_gp->tg_pt_gp_transition_work,
- transition_tmo);
+ schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work,
+ transition_tmo);
} else {
tg_pt_gp->tg_pt_gp_transition_complete = &wait;
- queue_delayed_work(tg_pt_gp->tg_pt_gp_dev->tmr_wq,
- &tg_pt_gp->tg_pt_gp_transition_work, 0);
+ schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work, 0);
wait_for_completion(&wait);
tg_pt_gp->tg_pt_gp_transition_complete = NULL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ladislav Michl <[email protected]>
[ Upstream commit c98769475575c8a585f5b3952f4b5f90266f699b ]
While usb_control_msg function expects timeout in miliseconds, a value
of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error
message which looks like:
udlfb: Read EDID byte 78 failed err ffffff92
as error is either negative errno or number of bytes transferred use %d
format specifier.
Returned EDID is in second byte, so return error when less than two bytes
are received.
Fixes: 18dffdf8913a ("staging: udlfb: enhance EDID and mode handling support")
Signed-off-by: Ladislav Michl <[email protected]>
Cc: Bernie Thompson <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/udlfb.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -769,11 +769,11 @@ static int dlfb_get_edid(struct dlfb_dat
for (i = 0; i < len; i++) {
ret = usb_control_msg(dev->udev,
- usb_rcvctrlpipe(dev->udev, 0), (0x02),
- (0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2,
- HZ);
- if (ret < 1) {
- pr_err("Read EDID byte %d failed err %x\n", i, ret);
+ usb_rcvctrlpipe(dev->udev, 0), 0x02,
+ (0x80 | (0x02 << 5)), i << 8, 0xA1,
+ rbuf, 2, USB_CTRL_GET_TIMEOUT);
+ if (ret < 2) {
+ pr_err("Read EDID byte %d failed: %d\n", i, ret);
i--;
break;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit 451f130602619a17c8883dd0b71b11624faffd51 ]
We should go through the error handling code instead of returning -ENOMEM
directly.
Signed-off-by: Christophe JAILLET <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/au1200fb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
@@ -1699,7 +1699,8 @@ static int au1200fb_drv_probe(struct pla
if (!fbdev->fb_mem) {
print_err("fail to allocate frambuffer (size: %dK))",
fbdev->fb_len / 1024);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto failed;
}
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qiang <[email protected]>
[ Upstream commit 3ad3f8ce50914288731a3018b27ee44ab803e170 ]
PCIe PME and native hotplug share the same interrupt number, so hotplug
interrupts are also processed by PME. In some cases, e.g., a Link Down
interrupt, a device may be present but unreachable, so when we try to
read its Root Status register, the read fails and we get all ones data
(0xffffffff).
Previously, we interpreted that data as PCI_EXP_RTSTA_PME being set, i.e.,
"some device has asserted PME," so we scheduled pcie_pme_work_fn(). This
caused an infinite loop because pcie_pme_work_fn() tried to handle PME
requests until PCI_EXP_RTSTA_PME is cleared, but with the link down,
PCI_EXP_RTSTA_PME can't be cleared.
Check for the invalid 0xffffffff data everywhere we read the Root Status
register.
1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from
non-existent devices") added similar checks in the hotplug driver.
Signed-off-by: Qiang Zheng <[email protected]>
[bhelgaas: changelog, also check in pcie_pme_work_fn(), use "~0" to follow
other similar checks]
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pcie/pme.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -233,6 +233,9 @@ static void pcie_pme_work_fn(struct work
break;
pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
+ if (rtsta == (u32) ~0)
+ break;
+
if (rtsta & PCI_EXP_RTSTA_PME) {
/*
* Clear PME status of the port. If there are other
@@ -280,7 +283,7 @@ static irqreturn_t pcie_pme_irq(int irq,
spin_lock_irqsave(&data->lock, flags);
pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
- if (!(rtsta & PCI_EXP_RTSTA_PME)) {
+ if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) {
spin_unlock_irqrestore(&data->lock, flags);
return IRQ_NONE;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
[ Upstream commit cfe2b621bb18d86e93271febf8c6e37622da2d14 ]
Avoid that cmd->se_cmd.se_tfo is read after a command has already been
freed.
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Mike Christie <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -674,6 +674,7 @@ static int iscsit_add_reject_from_cmd(
unsigned char *buf)
{
struct iscsi_conn *conn;
+ const bool do_put = cmd->se_cmd.se_tfo != NULL;
if (!cmd->conn) {
pr_err("cmd->conn is NULL for ITT: 0x%08x\n",
@@ -704,7 +705,7 @@ static int iscsit_add_reject_from_cmd(
* Perform the kref_put now if se_cmd has already been setup by
* scsit_setup_scsi_cmd()
*/
- if (cmd->se_cmd.se_tfo != NULL) {
+ if (do_put) {
pr_debug("iscsi reject: calling target_put_sess_cmd >>>>>>\n");
target_put_sess_cmd(&cmd->se_cmd);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: tangwenji <[email protected]>
[ Upstream commit 24528f089d0a444070aa4f715ace537e8d6bf168 ]
When is pr_reg->isid_present_at_reg is false,this function should return.
This fixes a regression originally introduced by:
commit d2843c173ee53cf4c12e7dfedc069a5bc76f0ac5
Author: Andy Grover <[email protected]>
Date: Thu May 16 10:40:55 2013 -0700
target: Alter core_pr_dump_initiator_port for ease of use
Signed-off-by: tangwenji <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_pr.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -58,8 +58,10 @@ void core_pr_dump_initiator_port(
char *buf,
u32 size)
{
- if (!pr_reg->isid_present_at_reg)
+ if (!pr_reg->isid_present_at_reg) {
buf[0] = '\0';
+ return;
+ }
snprintf(buf, size, ",i,0x%s", pr_reg->pr_reg_isid);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Suzuki K Poulose <[email protected]>
[ Upstream commit c7f5828bf77dcbd61d51f4736c1d5aa35663fbb4 ]
When the PMU driver is built as a module, the perf expects the
pmu->module to be valid, so that the driver is prevented from
being unloaded while it is in use. Fix the CCN pmu driver to
fill in this field.
Fixes: a33b0daab73a0 ("bus: ARM CCN PMU driver")
Cc: Pawel Moll <[email protected]>
Cc: Will Deacon <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bus/arm-ccn.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1157,6 +1157,7 @@ static int arm_ccn_pmu_init(struct arm_c
/* Perf driver registration */
ccn->dt.pmu = (struct pmu) {
+ .module = THIS_MODULE,
.attr_groups = arm_ccn_pmu_attr_groups,
.task_ctx_nr = perf_invalid_context,
.event_init = arm_ccn_pmu_event_init,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 29c8bbbd6e21daa0997d1c3ee886b897ee7ad652 ]
In afs_writepages_region(), inside the loop where we find dirty pages to
deal with, one of the if-statements is missing a put_page().
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/write.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -504,6 +504,7 @@ static int afs_writepages_region(struct
if (PageWriteback(page) || !PageDirty(page)) {
unlock_page(page);
+ put_page(page);
continue;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Kaehlcke <[email protected]>
[ Upstream commit 23f963e91fd81f44f6b316b1c24db563354c6be8 ]
This fixes the following warning when building with clang and
CONFIG_DMA_ENGINE_RAID=n :
drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
return &unmap_pool[2];
^ ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {
^
drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
return &unmap_pool[3];
^ ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {
Signed-off-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/dmaengine.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -976,12 +976,14 @@ static struct dmaengine_unmap_pool *__ge
switch (order) {
case 0 ... 1:
return &unmap_pool[0];
+#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID)
case 2 ... 4:
return &unmap_pool[1];
case 5 ... 7:
return &unmap_pool[2];
case 8:
return &unmap_pool[3];
+#endif
default:
BUG();
return NULL;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Feng <[email protected]>
[ Upstream commit f02b2320b27c16b644691267ee3b5c110846f49e ]
The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the
good readbility, it's better to invoke it in exit func when the init
func invokes mutex_init.
Signed-off-by: Gao Feng <[email protected]>
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ppp/ppp_generic.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -916,6 +916,7 @@ static __net_exit void ppp_exit_net(stru
{
struct ppp_net *pn = net_generic(net, ppp_net_id);
+ mutex_destroy(&pn->all_ppp_mutex);
idr_destroy(&pn->units_idr);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit 627f46943ff90bcc32ddeb675d881c043c6fa2ae ]
Mode bits for an afs file should not be enforced in the usual
way.
For files, the absence of user bits can restrict file access
with respect to what is granted by the server.
These bits apply regardless of the owner or the current uid; the
rest of the mode bits (group, other) are ignored.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/security.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/fs/afs/security.c
+++ b/fs/afs/security.c
@@ -340,17 +340,22 @@ int afs_permission(struct inode *inode,
} else {
if (!(access & AFS_ACE_LOOKUP))
goto permission_denied;
+ if ((mask & MAY_EXEC) && !(inode->i_mode & S_IXUSR))
+ goto permission_denied;
if (mask & (MAY_EXEC | MAY_READ)) {
if (!(access & AFS_ACE_READ))
goto permission_denied;
+ if (!(inode->i_mode & S_IRUSR))
+ goto permission_denied;
} else if (mask & MAY_WRITE) {
if (!(access & AFS_ACE_WRITE))
goto permission_denied;
+ if (!(inode->i_mode & S_IWUSR))
+ goto permission_denied;
}
}
key_put(key);
- ret = generic_permission(inode, mask);
_leave(" = %d", ret);
return ret;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit abdc0eb06964fe1d2fea6dd1391b734d0590365d ]
When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.
Reported-by: Cezary Sliwa <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/udf/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -706,7 +706,7 @@ static loff_t udf_check_vsd(struct super
else
sectorsize = sb->s_blocksize;
- sector += (sbi->s_session << sb->s_blocksize_bits);
+ sector += (((loff_t)sbi->s_session) << sb->s_blocksize_bits);
udf_debug("Starting at sector %u (%ld byte sectors)\n",
(unsigned int)(sector >> sb->s_blocksize_bits),
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bin Liu <[email protected]>
commit bd3486ded7a0c313a6575343e6c2b21d14476645 upstream.
When babble condition happens, the musb controller might automatically
turns off VBUS. On DA8xx platform, the controller generates drvvbus
interrupt for turning off VBUS along with the babble interrupt.
In this case, we should handle the babble interrupt first and recover
from the babble condition.
This change ignores the drvvbus interrupt if babble interrupt is also
generated at the same time, so the babble recovery routine works
properly.
Signed-off-by: Bin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/musb/da8xx.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -350,7 +350,15 @@ static irqreturn_t da8xx_musb_interrupt(
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&otg_workaround);
- } else {
+ } else if (!(musb->int_usb & MUSB_INTR_BABBLE)){
+ /*
+ * When babble condition happens, drvvbus interrupt
+ * is also generated. Ignore this drvvbus interrupt
+ * and let babble interrupt handler recovers the
+ * controller; otherwise, the host-mode flag is lost
+ * due to the MUSB_DEV_MODE() call below and babble
+ * recovery logic will not called.
+ */
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bob Peterson <[email protected]>
[ Upstream commit cc555b09d8c3817aeebda43a14ab67049a5653f7 ]
This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.
The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.
Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:
filemap_fdatawrite() -> __filemap_fdatawrite_range()
__filemap_fdatawrite_range() -> do_writepages()
do_writepages() -> gfs2_jdata_writepages()
gfs2_jdata_writepages() -> gfs2_log_flush()
This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
Acked-by: Abhijith Das <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/file.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -256,7 +256,7 @@ static int do_gfs2_set_flags(struct file
goto out;
}
if ((flags ^ new_flags) & GFS2_DIF_JDATA) {
- if (flags & GFS2_DIF_JDATA)
+ if (new_flags & GFS2_DIF_JDATA)
gfs2_log_flush(sdp, ip->i_gl, NORMAL_FLUSH);
error = filemap_fdatawrite(inode->i_mapping);
if (error)
@@ -264,6 +264,8 @@ static int do_gfs2_set_flags(struct file
error = filemap_fdatawait(inode->i_mapping);
if (error)
goto out;
+ if (new_flags & GFS2_DIF_JDATA)
+ gfs2_ordered_del_inode(ip);
}
error = gfs2_trans_begin(sdp, RES_DINODE, 0);
if (error)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <[email protected]>
[ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ]
The build robot is complaining on Blackfin:
drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup':
>> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing
pointer to incomplete type 'struct gpio_port_t'
writew(readw(®s->port_fer) & ~BIT(offset),
^~
drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq':
>> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing
pointer to incomplete type 'struct bfin_pint_regs'
if (readl(®s->invert_set) & pintbit)
^~
It seems the driver need to include <asm/gpio.h> and <asm/irq.h>
to compile.
The Blackfin architecture was re-defining the Kconfig
PINCTRL symbol which is not OK, so replaced this with
PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2
just like most arches do.
Further, the old GPIO driver symbol GPIO_ADI was possible to
select at the same time as selecting PINCTRL. This was not
working because the arch-local <asm/gpio.h> header contains
an explicit #ifndef PINCTRL clause making compilation break
if you combine them. The same is true for DEBUG_MMRS.
Make sure the ADI2 pinctrl driver is not selected at the same
time as the old GPIO implementation. (This should be converted
to use gpiolib or pincontrol and move to drivers/...) Also make
sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at
the same time as the new PINCTRL implementation, and only make
PINCTRL_ADI2 selectable for the Blackfin families that actually
have it.
This way it is still possible to add e.g. I2C-based pin
control expanders on the Blackfin.
Cc: Steven Miao <[email protected]>
Cc: Huanhuan Feng <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/blackfin/Kconfig | 7 +++++--
arch/blackfin/Kconfig.debug | 1 +
drivers/pinctrl/Kconfig | 3 ++-
3 files changed, 8 insertions(+), 3 deletions(-)
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -318,11 +318,14 @@ config BF53x
config GPIO_ADI
def_bool y
+ depends on !PINCTRL
depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
-config PINCTRL
+config PINCTRL_BLACKFIN_ADI2
def_bool y
- depends on BF54x || BF60x
+ depends on (BF54x || BF60x)
+ select PINCTRL
+ select PINCTRL_ADI2
config MEM_MT48LC64M4A2FB_7E
bool
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -17,6 +17,7 @@ config DEBUG_VERBOSE
config DEBUG_MMRS
tristate "Generate Blackfin MMR tree"
+ depends on !PINCTRL
select DEBUG_FS
help
Create a tree of Blackfin MMRs via the debugfs tree. If
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -28,7 +28,8 @@ config DEBUG_PINCTRL
config PINCTRL_ADI2
bool "ADI pin controller driver"
- depends on BLACKFIN
+ depends on (BF54x || BF60x)
+ depends on !GPIO_ADI
select PINMUX
select IRQ_DOMAIN
help
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kurt Garloff <[email protected]>
[ Upstream commit 909cf3e16a5274fe2127cf3cea5c8dba77b2c412 ]
All EMC SYMMETRIX support REPORT_LUNS, even if configured to report
SCSI-2 for whatever reason.
Signed-off-by: Kurt Garloff <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_devinfo.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -160,7 +160,7 @@ static struct {
{"DGC", "RAID", NULL, BLIST_SPARSELUN}, /* Dell PV 650F, storage on LUN 0 */
{"DGC", "DISK", NULL, BLIST_SPARSELUN}, /* Dell PV 650F, no storage on LUN 0 */
{"EMC", "Invista", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_FORCELUN},
+ {"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_REPORTLUN2},
{"EMULEX", "MD21/S2 ESDI", NULL, BLIST_SINGLELUN},
{"easyRAID", "16P", NULL, BLIST_NOREPORTLUN},
{"easyRAID", "X6P", NULL, BLIST_NOREPORTLUN},
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
[ Upstream commit 3e351275655d3c84dc28abf170def9786db5176d ]
We could allocate less memory than intended because we do:
bfad->regdata = kzalloc(len << 2, GFP_KERNEL);
The shift can overflow leading to a crash. This is debugfs code so the
impact is very small. I fixed the network version of this in March with
commit 13e2d5187f6b ("bna: integer overflow bug in debugfs").
Fixes: ab2a9ba189e8 ("[SCSI] bfa: add debugfs support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/bfa/bfad_debugfs.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -254,7 +254,8 @@ bfad_debugfs_write_regrd(struct file *fi
struct bfad_s *bfad = port->bfad;
struct bfa_s *bfa = &bfad->bfa;
struct bfa_ioc_s *ioc = &bfa->ioc;
- int addr, len, rc, i;
+ int addr, rc, i;
+ u32 len;
u32 *regbuf;
void __iomem *rb, *reg_addr;
unsigned long flags;
@@ -274,7 +275,7 @@ bfad_debugfs_write_regrd(struct file *fi
}
rc = sscanf(kern_buf, "%x:%x", &addr, &len);
- if (rc < 2) {
+ if (rc < 2 || len > (UINT_MAX >> 2)) {
printk(KERN_INFO
"bfad[%d]: %s failed to read user buf\n",
bfad->inst_no, __func__);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
[ Upstream commit 235b6003fb28f0dd8e7ed8fbdb088bb548291766 ]
When reshaping a fully degraded raid5/raid6 to a larger
nubmer of devices, the new device(s) are not in-sync
and so that can make the newly grown stripe appear to be
"failed".
To avoid this, we set the R5_Expanded flag to say "Even though
this device is not fully in-sync, this block is safe so
don't treat the device as failed for this stripe".
This flag is set for data devices, not not for parity devices.
Consequently, if you have a RAID6 with two devices that are partly
recovered and a spare, and start a reshape to include the spare,
then when the reshape gets past the point where the recovery was
up to, it will think the stripes are failed and will get into
an infinite loop, failing to make progress.
So when contructing parity on an EXPAND_READY stripe,
set R5_Expanded.
Reported-by: Curt <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid5.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1454,8 +1454,11 @@ static void ops_complete_reconstruct(voi
struct r5dev *dev = &sh->dev[i];
if (dev->written || i == pd_idx || i == qd_idx) {
- if (!discard && !test_bit(R5_SkipCopy, &dev->flags))
+ if (!discard && !test_bit(R5_SkipCopy, &dev->flags)) {
set_bit(R5_UPTODATE, &dev->flags);
+ if (test_bit(STRIPE_EXPAND_READY, &sh->state))
+ set_bit(R5_Expanded, &dev->flags);
+ }
if (fua)
set_bit(R5_WantFUA, &dev->flags);
if (sync)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: nixiaoming <[email protected]>
[ Upstream commit c79dde629d2027ca80329c62854a7635e623d527 ]
After rmmod 8250.ko
tty_kref_put starts kwork (release_one_tty) to release proc interface
oops when accessing driver->driver_name in proc_tty_unregister_driver
Use jprobe, found driver->driver_name point to 8250.ko
static static struct uart_driver serial8250_reg
.driver_name= serial,
Use name in proc_dir_entry instead of driver->driver_name to fix oops
test on linux 4.1.12:
BUG: unable to handle kernel paging request at ffffffffa01979de
IP: [<ffffffff81310f40>] strchr+0x0/0x30
PGD 1a0d067 PUD 1a0e063 PMD 851c1f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ... ... [last unloaded: 8250]
CPU: 7 PID: 116 Comm: kworker/7:1 Tainted: G O 4.1.12 #1
Hardware name: Insyde RiverForest/Type2 - Board Product Name1, BIOS NE5KV904 12/21/2015
Workqueue: events release_one_tty
task: ffff88085b684960 ti: ffff880852884000 task.ti: ffff880852884000
RIP: 0010:[<ffffffff81310f40>] [<ffffffff81310f40>] strchr+0x0/0x30
RSP: 0018:ffff880852887c90 EFLAGS: 00010282
RAX: ffffffff81a5eca0 RBX: ffffffffa01979de RCX: 0000000000000004
RDX: ffff880852887d10 RSI: 000000000000002f RDI: ffffffffa01979de
RBP: ffff880852887cd8 R08: 0000000000000000 R09: ffff88085f5d94d0
R10: 0000000000000195 R11: 0000000000000000 R12: ffffffffa01979de
R13: ffff880852887d00 R14: ffffffffa01979de R15: ffff88085f02e840
FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01979de CR3: 0000000001a0c000 CR4: 00000000001406e0
Stack:
ffffffff812349b1 ffff880852887cb8 ffff880852887d10 ffff88085f5cd6c2
ffff880852800a80 ffffffffa01979de ffff880852800a84 0000000000000010
ffff88085bb28bd8 ffff880852887d38 ffffffff812354f0 ffff880852887d08
Call Trace:
[<ffffffff812349b1>] ? __xlate_proc_name+0x71/0xd0
[<ffffffff812354f0>] remove_proc_entry+0x40/0x180
[<ffffffff815f6811>] ? _raw_spin_lock_irqsave+0x41/0x60
[<ffffffff813be520>] ? destruct_tty_driver+0x60/0xe0
[<ffffffff81237c68>] proc_tty_unregister_driver+0x28/0x40
[<ffffffff813be548>] destruct_tty_driver+0x88/0xe0
[<ffffffff813be5bd>] tty_driver_kref_put+0x1d/0x20
[<ffffffff813becca>] release_one_tty+0x5a/0xd0
[<ffffffff81074159>] process_one_work+0x139/0x420
[<ffffffff810745a1>] worker_thread+0x121/0x450
[<ffffffff81074480>] ? process_scheduled_works+0x40/0x40
[<ffffffff8107a16c>] kthread+0xec/0x110
[<ffffffff81080000>] ? tg_rt_schedulable+0x210/0x220
[<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80
[<ffffffff815f7292>] ret_from_fork+0x42/0x70
[<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80
Signed-off-by: nixiaoming <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/proc/proc_tty.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/proc/proc_tty.c
+++ b/fs/proc/proc_tty.c
@@ -14,6 +14,7 @@
#include <linux/tty.h>
#include <linux/seq_file.h>
#include <linux/bitops.h>
+#include "internal.h"
/*
* The /proc/tty directory inodes...
@@ -164,7 +165,7 @@ void proc_tty_unregister_driver(struct t
if (!ent)
return;
- remove_proc_entry(driver->driver_name, proc_tty_driver);
+ remove_proc_entry(ent->name, proc_tty_driver);
driver->proc_entry = NULL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: "tang.junhui" <[email protected]>
[ Upstream commit c157313791a999646901b3e3c6888514ebc36d62 ]
Currently, Cache missed IOs are identified by s->cache_miss, but actually,
there are many situations that missed IOs are not assigned a value for
s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO
(s->iop.bypass = 1), or the cache_bio allocate failed. In these situations,
it will go to out_put or out_submit, and s->cache_miss is null, which leads
bch_mark_cache_accounting() to treat this IO as a hit IO.
[ML: applied by 3-way merge]
Signed-off-by: tang.junhui <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/request.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -464,6 +464,7 @@ struct search {
unsigned recoverable:1;
unsigned write:1;
unsigned read_dirty_data:1;
+ unsigned cache_missed:1;
unsigned long start_time;
@@ -651,6 +652,7 @@ static inline struct search *search_allo
s->orig_bio = bio;
s->cache_miss = NULL;
+ s->cache_missed = 0;
s->d = d;
s->recoverable = 1;
s->write = (bio->bi_rw & REQ_WRITE) != 0;
@@ -774,7 +776,7 @@ static void cached_dev_read_done_bh(stru
struct cached_dev *dc = container_of(s->d, struct cached_dev, disk);
bch_mark_cache_accounting(s->iop.c, s->d,
- !s->cache_miss, s->iop.bypass);
+ !s->cache_missed, s->iop.bypass);
trace_bcache_read(s->orig_bio, !s->cache_miss, s->iop.bypass);
if (s->iop.error)
@@ -793,6 +795,8 @@ static int cached_dev_cache_miss(struct
struct cached_dev *dc = container_of(s->d, struct cached_dev, disk);
struct bio *miss, *cache_bio;
+ s->cache_missed = 1;
+
if (s->cache_miss || s->iop.bypass) {
miss = bio_next_split(bio, sectors, GFP_NOIO, s->d->bio_split);
ret = miss == bio ? MAP_DONE : MAP_CONTINUE;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Williamson <[email protected]>
[ Upstream commit 16b6c8bb687cc3bec914de09061fcb8411951fda ]
When removing a device, for example a VF being removed due to SR-IOV
teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual
hot-unplug, we first remove the procfs and sysfs attributes for the device
before attempting to release the device from any driver bound to it.
Unbinding the driver from the device can take time. The device might need
to write out data or it might be actively in use. If it's in use by
userspace through a vfio driver, the unbind might block until the user
releases the device. This leads to a potentially non-trivial amount of
time where the device exists, but we've torn down the interfaces that
userspace uses to examine devices, for instance lspci might generate this
sort of error:
pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config
lspci: Unable to read the standard configuration space header of device 0000:01:0a.3
We don't seem to have any dependence on this teardown ordering in the
kernel, so let's unbind the driver first, which is also more symmetric with
the instantiation of the device in pci_bus_add_device().
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/remove.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -20,9 +20,9 @@ static void pci_stop_dev(struct pci_dev
pci_pme_active(dev, false);
if (dev->is_added) {
+ device_release_driver(&dev->dev);
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
- device_release_driver(&dev->dev);
dev->is_added = 0;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian Foster <[email protected]>
[ Upstream commit 9f2a4505800607e537e9dd9dea4f55c4b0c30c7a ]
It is possible for mkfs to format very small filesystems with too
small of an internal log with respect to the various minimum size
and block count requirements. If this occurs when the log happens to
be smaller than the scan window used for cycle verification and the
scan wraps the end of the log, the start_blk calculation in
xlog_find_head() underflows and leads to an attempt to scan an
invalid range of log blocks. This results in log recovery failure
and a failed mount.
Since there may be filesystems out in the wild with this kind of
geometry, we cannot simply refuse to mount. Instead, cap the scan
window for cycle verification to the size of the physical log. This
ensures that the cycle verification proceeds as expected when the
scan wraps the end of the log.
Reported-by: Zorro Lang <[email protected]>
Signed-off-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/xfs_log_recover.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -740,7 +740,7 @@ xlog_find_head(
* in the in-core log. The following number can be made tighter if
* we actually look at the block size of the filesystem.
*/
- num_scan_bblks = XLOG_TOTAL_REC_SHIFT(log);
+ num_scan_bblks = min_t(int, log_bbnum, XLOG_TOTAL_REC_SHIFT(log));
if (head_blk >= num_scan_bblks) {
/*
* We are guaranteed that the entire check can be performed
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Duyck <[email protected]>
[ Upstream commit dd6b9c2c332b40f142740d1b11fb77c653ff98ea ]
This patch intoduces a slight adjustment for macvlan to address the fact
that in source mode I was seeing two copies of any packet addressed to the
macvlan interface being delivered where there should have been only one.
The issue appears to be that one copy was delivered based on the source MAC
address and then the second copy was being delivered based on the
destination MAC address. To fix it I am just treating a unicast address
match as though it is not a match since source based macvlan isn't supposed
to be matching based on the destination MAC anyway.
Fixes: 79cf79abce71 ("macvlan: add source mode")
Signed-off-by: Alexander Duyck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/macvlan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -440,7 +440,7 @@ static rx_handler_result_t macvlan_handl
struct macvlan_dev, list);
else
vlan = macvlan_hash_lookup(port, eth->h_dest);
- if (vlan == NULL)
+ if (!vlan || vlan->mode == MACVLAN_MODE_SOURCE)
return RX_HANDLER_PASS;
dev = vlan->dev;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liang Chen <[email protected]>
[ Upstream commit 330a4db89d39a6b43f36da16824eaa7a7509d34d ]
mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.
As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.
Signed-off-by: Liang Chen <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Reviewed-by: Eric Wheeler <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/super.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -2120,6 +2120,7 @@ static void bcache_exit(void)
if (bcache_major)
unregister_blkdev(bcache_major, "bcache");
unregister_reboot_notifier(&reboot);
+ mutex_destroy(&bch_register_lock);
}
static int __init bcache_init(void)
@@ -2138,14 +2139,15 @@ static int __init bcache_init(void)
bcache_major = register_blkdev(0, "bcache");
if (bcache_major < 0) {
unregister_reboot_notifier(&reboot);
+ mutex_destroy(&bch_register_lock);
return bcache_major;
}
if (!(bcache_wq = create_workqueue("bcache")) ||
!(bcache_kobj = kobject_create_and_add("bcache", fs_kobj)) ||
- sysfs_create_files(bcache_kobj, files) ||
bch_request_init() ||
- bch_debug_init(bcache_kobj))
+ bch_debug_init(bcache_kobj) ||
+ sysfs_create_files(bcache_kobj, files))
goto err;
return 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 58fed94dfb17e89556b5705f20f90e5b2971b6a1 ]
Flush outstanding writes in afs when an fd is closed. This is what NFS and
CIFS do.
Reported-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/file.c | 1 +
fs/afs/internal.h | 1 +
fs/afs/write.c | 14 ++++++++++++++
3 files changed, 16 insertions(+)
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -29,6 +29,7 @@ static int afs_readpages(struct file *fi
const struct file_operations afs_file_operations = {
.open = afs_open,
+ .flush = afs_flush,
.release = afs_release,
.llseek = generic_file_llseek,
.read = new_sync_read,
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -749,6 +749,7 @@ extern int afs_writepages(struct address
extern void afs_pages_written_back(struct afs_vnode *, struct afs_call *);
extern ssize_t afs_file_write(struct kiocb *, struct iov_iter *);
extern int afs_writeback_all(struct afs_vnode *);
+extern int afs_flush(struct file *, fl_owner_t);
extern int afs_fsync(struct file *, loff_t, loff_t, int);
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -743,6 +743,20 @@ out:
}
/*
+ * Flush out all outstanding writes on a file opened for writing when it is
+ * closed.
+ */
+int afs_flush(struct file *file, fl_owner_t id)
+{
+ _enter("");
+
+ if ((file->f_mode & FMODE_WRITE) == 0)
+ return 0;
+
+ return vfs_fsync(file, 0);
+}
+
+/*
* notification that a previously read-only page is about to become writable
* - if it returns an error, the caller will deliver a bus error signal
*/
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit 6186f0788b31f44affceeedc7b48eb10faea120d ]
The group was hard coded to GLOBAL_ROOT_GID; use the group
ID that was received from the server.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -69,7 +69,7 @@ static int afs_inode_map_status(struct a
set_nlink(inode, vnode->status.nlink);
inode->i_uid = vnode->status.owner;
- inode->i_gid = GLOBAL_ROOT_GID;
+ inode->i_gid = vnode->status.group;
inode->i_size = vnode->status.size;
inode->i_ctime.tv_sec = vnode->status.mtime_server;
inode->i_ctime.tv_nsec = 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
[ Upstream commit 66822d815ae61ecb2d9dba9031517e8a8476969d ]
Higher sclks seem to be unstable on some boards.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=100222
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/si_dpm.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -2989,9 +2989,13 @@ static void si_apply_state_adjust_rules(
max_mclk = 80000;
}
} else if (rdev->family == CHIP_OLAND) {
- if ((rdev->pdev->device == 0x6604) &&
- (rdev->pdev->subsystem_vendor == 0x1028) &&
- (rdev->pdev->subsystem_device == 0x066F)) {
+ if ((rdev->pdev->revision == 0xC7) ||
+ (rdev->pdev->revision == 0x80) ||
+ (rdev->pdev->revision == 0x81) ||
+ (rdev->pdev->revision == 0x83) ||
+ (rdev->pdev->revision == 0x87) ||
+ (rdev->pdev->device == 0x6604) ||
+ (rdev->pdev->device == 0x6605)) {
max_sclk = 75000;
}
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (VMware)" <[email protected]>
[ Upstream commit 2317d5f1c34913bac5971d93d69fb6c31bb74670 ]
I was testing Daniel's changes with his test case, and tweaked it a
little. Instead of having the runtime equal to the deadline, I
increased the deadline ten fold.
Daniel's test case had:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
To make it more interesting, I changed it to:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 20 * 1000 * 1000; /* 20 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
The results were rather surprising. The behavior that Daniel's patch
was fixing came back. The task started using much more than .1% of the
CPU. More like 20%.
Looking into this I found that it was due to the dl_entity_overflow()
constantly returning true. That's because it uses the relative period
against relative runtime vs the absolute deadline against absolute
runtime.
runtime / (deadline - t) > dl_runtime / dl_period
There's even a comment mentioning this, and saying that when relative
deadline equals relative period, that the equation is the same as using
deadline instead of period. That comment is backwards! What we really
want is:
runtime / (deadline - t) > dl_runtime / dl_deadline
We care about if the runtime can make its deadline, not its period. And
then we can say "when the deadline equals the period, the equation is
the same as using dl_period instead of dl_deadline".
After correcting this, now when the task gets enqueued, it can throttle
correctly, and Daniel's fix to the throttling of sleeping deadline
tasks works even when the runtime and deadline are not the same.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Daniel Bristot de Oliveira <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Luca Abeni <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Romulo Silva de Oliveira <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tommaso Cucinotta <[email protected]>
Link: http://lkml.kernel.org/r/02135a27f1ae3fe5fd032568a5a2f370e190e8d7.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/deadline.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -368,13 +368,13 @@ static void replenish_dl_entity(struct s
*
* This function returns true if:
*
- * runtime / (deadline - t) > dl_runtime / dl_period ,
+ * runtime / (deadline - t) > dl_runtime / dl_deadline ,
*
* IOW we can't recycle current parameters.
*
- * Notice that the bandwidth check is done against the period. For
+ * Notice that the bandwidth check is done against the deadline. For
* task with deadline equal to period this is the same of using
- * dl_deadline instead of dl_period in the equation above.
+ * dl_period instead of dl_deadline in the equation above.
*/
static bool dl_entity_overflow(struct sched_dl_entity *dl_se,
struct sched_dl_entity *pi_se, u64 t)
@@ -399,7 +399,7 @@ static bool dl_entity_overflow(struct sc
* of anything below microseconds resolution is actually fiction
* (but still we want to give the user that illusion >;).
*/
- left = (pi_se->dl_period >> DL_SCALE) * (dl_se->runtime >> DL_SCALE);
+ left = (pi_se->dl_deadline >> DL_SCALE) * (dl_se->runtime >> DL_SCALE);
right = ((dl_se->deadline - t) >> DL_SCALE) *
(pi_se->dl_runtime >> DL_SCALE);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ]
_calc_vm_trans() does not handle the situation when some of the passed
flags are 0 (which can happen if these VM flags do not make sense for
the architecture). Improve the _calc_vm_trans() macro to return 0 in
such situation. Since all passed flags are constant, this does not add
any runtime overhead.
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mman.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -63,8 +63,9 @@ static inline int arch_validate_prot(uns
* ("bit1" and "bit2" must be single bits)
*/
#define _calc_vm_trans(x, bit1, bit2) \
+ ((!(bit1) || !(bit2)) ? 0 : \
((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \
- : ((x) & (bit1)) / ((bit1) / (bit2)))
+ : ((x) & (bit1)) / ((bit1) / (bit2))))
/*
* Combine the mmap "prot" argument into "vm_flags" used internally.
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiang Yi <[email protected]>
[ Upstream commit 594e25e73440863981032d76c9b1e33409ceff6e ]
The function fd_execute_unmap() in target_core_file.c calles
ret = file->f_op->fallocate(file, mode, pos, len);
Some filesystems implement fallocate() to return error if
length is zero (e.g. btrfs) but according to SCSI Block
Commands spec UNMAP should return success for zero length.
Signed-off-by: Jiang Yi <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_file.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -592,6 +592,10 @@ fd_do_unmap(struct se_cmd *cmd, void *pr
struct inode *inode = file->f_mapping->host;
int ret;
+ if (!nolb) {
+ return 0;
+ }
+
if (cmd->se_dev->dev_attrib.pi_prot_type) {
ret = fd_do_prot_unmap(cmd, lba, nolb);
if (ret)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Markus Elfring <[email protected]>
[ Upstream commit f6c8a317ab208aee223776327c06f23342492d54 ]
Source code review for a specific software refactoring showed the need
for another correction because the error code "-1" was returned so far
if a call of the function "sony_call_snc_handle" failed here.
Thus assign the return value from these two function calls also to
the variable "err" and provide it in case of a failure.
Fixes: d6f15ed876b83a1a0eba1d0473eef58acc95444a ("sony-laptop: use soft rfkill status stored in hw")
Suggested-by: Andy Shevchenko <[email protected]>
Link: https://lkml.org/lkml/2017/10/31/463
Link: https://lkml.kernel.org/r/<CAHp75VcMkXCioCzmLE0+BTmkqc5RSOx9yPO0ectVHMrMvewgwg@mail.gmail.com>
Signed-off-by: Markus Elfring <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/sony-laptop.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1654,17 +1654,19 @@ static int sony_nc_setup_rfkill(struct a
if (!rfk)
return -ENOMEM;
- if (sony_call_snc_handle(sony_rfkill_handle, 0x200, &result) < 0) {
+ err = sony_call_snc_handle(sony_rfkill_handle, 0x200, &result);
+ if (err < 0) {
rfkill_destroy(rfk);
- return -1;
+ return err;
}
hwblock = !(result & 0x1);
- if (sony_call_snc_handle(sony_rfkill_handle,
- sony_rfkill_address[nc_type],
- &result) < 0) {
+ err = sony_call_snc_handle(sony_rfkill_handle,
+ sony_rfkill_address[nc_type],
+ &result);
+ if (err < 0) {
rfkill_destroy(rfk);
- return -1;
+ return err;
}
swblock = !(result & 0x2);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: tangwenji <[email protected]>
[ Upstream commit 12d5a43b2dffb6cd28062b4e19024f7982393288 ]
tpg must free when call core_tpg_register() return fail
Signed-off-by: tangwenji <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target_configfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -1458,7 +1458,7 @@ static struct se_portal_group *lio_targe
wwn, &tpg->tpg_se_tpg, tpg,
TRANSPORT_TPG_TYPE_NORMAL);
if (ret < 0)
- return NULL;
+ goto free_out;
ret = iscsit_tpg_add_portal_group(tiqn, tpg);
if (ret != 0)
@@ -1470,6 +1470,7 @@ static struct se_portal_group *lio_targe
return &tpg->tpg_se_tpg;
out:
core_tpg_deregister(&tpg->tpg_se_tpg);
+free_out:
kfree(tpg);
return NULL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shriya <[email protected]>
[ Upstream commit cd77b5ce208c153260ed7882d8910f2395bfaabd ]
The call to /proc/cpuinfo in turn calls cpufreq_quick_get() which
returns the last frequency requested by the kernel, but may not
reflect the actual frequency the processor is running at. This patch
makes a call to cpufreq_get() instead which returns the current
frequency reported by the hardware.
Fixes: fb5153d05a7d ("powerpc: powernv: Implement ppc_md.get_proc_freq()")
Signed-off-by: Shriya <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/setup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -319,7 +319,7 @@ static unsigned long pnv_get_proc_freq(u
{
unsigned long ret_freq;
- ret_freq = cpufreq_quick_get(cpu) * 1000ul;
+ ret_freq = cpufreq_get(cpu) * 1000ul;
/*
* If the backend cpufreq driver does not exist,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
[ Upstream commit 6b148a7ce72a7f87c81cbcde48af014abc0516a9 ]
IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR
which is the mask register.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/sysdev/ipic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -844,12 +844,12 @@ void ipic_disable_mcp(enum ipic_mcp_irq
u32 ipic_get_mcp_status(void)
{
- return ipic_read(primary_ipic->regs, IPIC_SERMR);
+ return ipic_read(primary_ipic->regs, IPIC_SERSR);
}
void ipic_clear_mcp_status(u32 mask)
{
- ipic_write(primary_ipic->regs, IPIC_SERMR, mask);
+ ipic_write(primary_ipic->regs, IPIC_SERSR, mask);
}
/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: "William A. Kennington III" <[email protected]>
[ Upstream commit 71e24d7731a2903b1ae2bba2b2971c654d9c2aa6 ]
The current code checks the completion map to look for the first token
that is complete. In some cases, a completion can come in but the
token can still be on lease to the caller processing the completion.
If this completed but unreleased token is the first token found in the
bitmap by another tasks trying to acquire a token, then the
__test_and_set_bit call will fail since the token will still be on
lease. The acquisition will then fail with an EBUSY.
This patch reorganizes the acquisition code to look at the
opal_async_token_map for an unleased token. If the token has no lease
it must have no outstanding completions so we should never see an
EBUSY, unless we have leased out too many tokens. Since
opal_async_get_token_inrerruptible is protected by a semaphore, we
will practically never see EBUSY anymore.
Fixes: 8d7248232208 ("powerpc/powernv: Infrastructure to support OPAL async completion")
Signed-off-by: William A. Kennington III <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/opal-async.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/powerpc/platforms/powernv/opal-async.c
+++ b/arch/powerpc/platforms/powernv/opal-async.c
@@ -39,18 +39,18 @@ int __opal_async_get_token(void)
int token;
spin_lock_irqsave(&opal_async_comp_lock, flags);
- token = find_first_bit(opal_async_complete_map, opal_max_async_tokens);
+ token = find_first_zero_bit(opal_async_token_map, opal_max_async_tokens);
if (token >= opal_max_async_tokens) {
token = -EBUSY;
goto out;
}
- if (__test_and_set_bit(token, opal_async_token_map)) {
+ if (!__test_and_clear_bit(token, opal_async_complete_map)) {
token = -EBUSY;
goto out;
}
- __clear_bit(token, opal_async_complete_map);
+ __set_bit(token, opal_async_token_map);
out:
spin_unlock_irqrestore(&opal_async_comp_lock, flags);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit 8cae353e6b01ac3f18097f631cdbceb5ff28c7f3 ]
'ret' is known to be 0 at this point.
In case of memory allocation error in 'framebuffer_alloc()', return
-ENOMEM instead.
Signed-off-by: Christophe JAILLET <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/au1200fb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
@@ -1680,8 +1680,10 @@ static int au1200fb_drv_probe(struct pla
fbi = framebuffer_alloc(sizeof(struct au1200fb_device),
&dev->dev);
- if (!fbi)
+ if (!fbi) {
+ ret = -ENOMEM;
goto failed;
+ }
_au1200fb_infos[plane] = fbi;
fbdev = fbi->par;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stafford Horne <[email protected]>
[ Upstream commit 154e67cd8e8f964809d0e75e44bb121b169c75b3 ]
Was getting the following error with allmodconfig:
ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined!
This was simply a missing break statement, causing an unwanted fall
through.
Signed-off-by: Stafford Horne <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/openrisc/include/asm/uaccess.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/openrisc/include/asm/uaccess.h
+++ b/arch/openrisc/include/asm/uaccess.h
@@ -215,7 +215,7 @@ do { \
case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break; \
case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break; \
case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break; \
- case 8: __get_user_asm2(x, ptr, retval); \
+ case 8: __get_user_asm2(x, ptr, retval); break; \
default: (x) = __get_user_bad(); \
} \
} while (0)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit ac831a379d34109451b3c41a44a20ee10ecb615f ]
Dan's static analysis says:
drivers/video/fbdev/controlfb.c:560 control_setup()
error: buffer overflow 'control_mac_modes' 20 <= 21
Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22,
which may lead to an out of bounds read when parsing vmode commandline
options.
The bug was introduced in v2.4.5.6, when 2 new modes were added to
macmodes.h, but control_mac_modes[] wasn't updated:
https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.5.2&id=29f279c764808560eaceb88fef36cbc35c529aad
Augment control_mac_modes[] with the two new video modes to fix this.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/controlfb.h | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/video/fbdev/controlfb.h
+++ b/drivers/video/fbdev/controlfb.h
@@ -141,5 +141,7 @@ static struct max_cmodes control_mac_mod
{{ 1, 2}}, /* 1152x870, 75Hz */
{{ 0, 1}}, /* 1280x960, 75Hz */
{{ 0, 1}}, /* 1280x1024, 75Hz */
+ {{ 1, 2}}, /* 1152x768, 60Hz */
+ {{ 0, 1}}, /* 1600x1024, 60Hz */
};
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zygo Blaxell <[email protected]>
[ Upstream commit e1699d2d7bf6e6cce3e1baff19f9dd4595a58664 ]
This is a story about 4 distinct (and very old) btrfs bugs.
Commit c8b978188c ("Btrfs: Add zlib compression support") added
three data corruption bugs for inline extents (bugs #1-3).
Commit 93c82d5750 ("Btrfs: zero page past end of inline file items")
fixed bug #1: uncompressed inline extents followed by a hole and more
extents could get non-zero data in the hole as they were read. The fix
was to add a memset in btrfs_get_extent to zero out the hole.
Commit 166ae5a418 ("btrfs: fix inline compressed read err corruption")
fixed bug #2: compressed inline extents which contained non-zero bytes
might be replaced with zero bytes in some cases. This patch removed an
unhelpful memset from uncompress_inline, but the case where memset is
required was missed.
There is also a memset in the decompression code, but this only covers
decompressed data that is shorter than the ram_bytes from the extent
ref record. This memset doesn't cover the region between the end of the
decompressed data and the end of the page. It has also moved around a
few times over the years, so there's no single patch to refer to.
This patch fixes bug #3: compressed inline extents followed by a hole
and more extents could get non-zero data in the hole as they were read
(i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/).
The fix is the same: zero out the hole in the compressed case too,
by putting a memset back in uncompress_inline, but this time with
correct parameters.
The last and oldest bug, bug #0, is the cause of the offending inline
extent/hole/extent pattern. Bug #0 is a subtle and mostly-harmless quirk
of behavior somewhere in the btrfs write code. In a few special cases,
an inline extent and hole are allowed to persist where they normally
would be combined with later extents in the file.
A fast reproducer for bug #0 is presented below. A few offending extents
are also created in the wild during large rsync transfers with the -S
flag. A Linux kernel build (git checkout; make allyesconfig; make -j8)
will produce a handful of offending files as well. Once an offending
file is created, it can present different content to userspace each
time it is read.
Bug #0 is at least 4 and possibly 8 years old. I verified every vX.Y
kernel back to v3.5 has this behavior. There are fossil records of this
bug's effects in commits all the way back to v2.6.32. I have no reason
to believe bug #0 wasn't present at the beginning of btrfs compression
support in v2.6.29, but I can't easily test kernels that old to be sure.
It is not clear whether bug #0 is worth fixing. A fix would likely
require injecting extra reads into currently write-only paths, and most
of the exceptional cases caused by bug #0 are already handled now.
Whether we like them or not, bug #0's inline extents followed by holes
are part of the btrfs de-facto disk format now, and we need to be able
to read them without data corruption or an infoleak. So enough about
bug #0, let's get back to bug #3 (this patch).
An example of on-disk structure leading to data corruption found in
the wild:
item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160
inode generation 50 transid 50 size 47424 nbytes 49141
block group 0 mode 100644 links 1 uid 0 gid 0
rdev 0 flags 0x0(none)
item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20
inode ref index 3 namelen 10 name: DB_File.so
item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362
inline extent data size 1341 ram 4085 compress(zlib)
item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53
extent data disk byte 5367308288 nr 20480
extent data offset 0 nr 45056 ram 45056
extent compression(zlib)
Different data appears in userspace during each read of the 11 bytes
between 4085 and 4096. The extent in item 63 is not long enough to
fill the first page of the file, so a memset is required to fill the
space between item 63 (ending at 4085) and item 64 (beginning at 4096)
with zero.
Here is a reproducer from Liu Bo, which demonstrates another method
of creating the same inline extent and hole pattern:
Using 'page_poison=on' kernel command line (or enable
CONFIG_PAGE_POISONING) run the following:
# touch foo
# chattr +c foo
# xfs_io -f -c "pwrite -W 0 1000" foo
# xfs_io -f -c "falloc 4 8188" foo
# od -x foo
# echo 3 >/proc/sys/vm/drop_caches
# od -x foo
This produce the following on my box:
Correct output: file contains 1000 data bytes followed
by zeros:
0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000
0001760 0000 0000 0000 0000 0000 0000 0000 0000
*
0020000
Actual output: the data after the first 1000 bytes
will be different each run:
0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d
0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400
0002000 435f 0056 5f74 6164 7400 645f 0062 5f74
(...)
Signed-off-by: Zygo Blaxell <[email protected]>
Reviewed-by: Liu Bo <[email protected]>
Reviewed-by: Chris Mason <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6325,6 +6325,20 @@ static noinline int uncompress_inline(st
max_size = min_t(unsigned long, PAGE_CACHE_SIZE, max_size);
ret = btrfs_decompress(compress_type, tmp, page,
extent_offset, inline_size, max_size);
+
+ /*
+ * decompression code contains a memset to fill in any space between the end
+ * of the uncompressed data and the end of max_size in case the decompressed
+ * data ends up shorter than ram_bytes. That doesn't cover the hole between
+ * the end of an inline extent and the beginning of the next block, so we
+ * cover that region here.
+ */
+
+ if (max_size + pg_offset < PAGE_SIZE) {
+ char *map = kmap(page);
+ memset(map + pg_offset + max_size, 0, PAGE_SIZE - max_size - pg_offset);
+ kunmap(page);
+ }
kfree(tmp);
return ret;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 146a1192783697810b63a1e41c4d59fc93387340 ]
afs_fs_store_data() works out of the size of the write it's going to make,
but it uses 32-bit unsigned subtraction in one place that gets
automatically cast to loff_t.
However, if to < offset, then the number goes negative, but as the result
isn't signed, this doesn't get sign-extended to 64-bits when placed in a
loff_t.
Fix by casting the operands to loff_t.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/fsclient.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -1225,7 +1225,7 @@ int afs_fs_store_data(struct afs_server
_enter(",%x,{%x:%u},,",
key_serial(wb->key), vnode->fid.vid, vnode->fid.vnode);
- size = to - offset;
+ size = (loff_t)to - (loff_t)offset;
if (first != last)
size += (loff_t)(last - first) << PAGE_SHIFT;
pos = (loff_t)first << PAGE_SHIFT;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 033853325fe3bdc70819a8b97915bd3bca41d3af ]
Currently client doesn't respect max sizes server returns in CREATE_SESSION.
nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0
so they never get set to the sizes returned by the server.
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4client.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -894,9 +894,9 @@ static void nfs4_session_set_rwsize(stru
server_resp_sz = sess->fc_attrs.max_resp_sz - nfs41_maxread_overhead;
server_rqst_sz = sess->fc_attrs.max_rqst_sz - nfs41_maxwrite_overhead;
- if (server->rsize > server_resp_sz)
+ if (!server->rsize || server->rsize > server_resp_sz)
server->rsize = server_resp_sz;
- if (server->wsize > server_rqst_sz)
+ if (!server->wsize || server->wsize > server_rqst_sz)
server->wsize = server_rqst_sz;
#endif /* CONFIG_NFS_V4_1 */
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
[ Upstream commit e7ede72a6d40cb3a30c087142d79381ca8a31dab ]
The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:
i) If the symbol has a start address (f.e. exposed via kallsyms)
that is at a page boundary, then the roundup(curr->start, 4096)
for the last entry will result in curr->start == curr->end with
a symbol length of zero.
ii) If the symbol has a start address that is shortly before a page
boundary, then also here, curr->end - curr->start will just be
very few bytes, where it's unrealistic that we could perform a
match against.
Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.
Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.
Reported-and-Tested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/symbol.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -191,7 +191,7 @@ void symbols__fixup_end(struct rb_root *
/* Last entry */
if (curr->end == curr->start)
- curr->end = roundup(curr->start, 4096);
+ curr->end = roundup(curr->start, 4096) + 4096;
}
void __map_groups__fixup_end(struct map_groups *mg, enum map_type type)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlad Yasevich <[email protected]>
[ Upstream commit 37c343b4f4e70e9dc328ab04903c0ec8d154c1a4 ]
When we notify peers of potential changes, it's also good to update
IGMP memberships. For example, during VM migration, updating IGMP
memberships will redirect existing multicast streams to the VM at the
new location.
Signed-off-by: Vladislav Yasevich <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1248,6 +1248,7 @@ void netdev_notify_peers(struct net_devi
{
rtnl_lock();
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, dev);
+ call_netdevice_notifiers(NETDEV_RESEND_IGMP, dev);
rtnl_unlock();
}
EXPORT_SYMBOL(netdev_notify_peers);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Jeffery <[email protected]>
commit d0709f1e66e8066c4ac6a54620ec116aa41937c0 upstream.
If a request_key() call to allocate and fill out a key attempts to insert the
key structure into a revoked keyring, the key will leak, using memory and part
of the user's key quota until the system reboots. This is from a failure of
construct_alloc_key() to decrement the key's reference count after the attempt
to insert into the requested keyring is rejected.
key_put() needs to be called in the link_prealloc_failed callpath to ensure
the unused key is released.
Signed-off-by: David Jeffery <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/request_key.c | 1 +
1 file changed, 1 insertion(+)
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -437,6 +437,7 @@ link_check_failed:
link_prealloc_failed:
mutex_unlock(&user->cons_lock);
+ key_put(key);
kleave(" = %d [prelink]", ret);
return ret;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <[email protected]>
commit 5d9b70f7d52eb14bb37861c663bae44de9521c35 upstream.
Avoid null pointer dereference if some function is walking through the
devs array accessing members of a new virt_dev that is mid allocation.
Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its
members are properly allocated.
issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port
"Quick analysis suggests that xhci_alloc_virt_device() is not mutex
protected. If so, there is a time frame where xhci->devs[slot_id] is set
but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL."
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-mem.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -978,10 +978,9 @@ int xhci_alloc_virt_device(struct xhci_h
return 0;
}
- xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
- if (!xhci->devs[slot_id])
+ dev = kzalloc(sizeof(*dev), flags);
+ if (!dev)
return 0;
- dev = xhci->devs[slot_id];
/* Allocate the (output) device context that will be used in the HC. */
dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
@@ -1029,9 +1028,17 @@ int xhci_alloc_virt_device(struct xhci_h
&xhci->dcbaa->dev_context_ptrs[slot_id],
le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id]));
+ xhci->devs[slot_id] = dev;
+
return 1;
fail:
- xhci_free_virt_device(xhci, slot_id);
+
+ if (dev->in_ctx)
+ xhci_free_container_ctx(xhci, dev->in_ctx);
+ if (dev->out_ctx)
+ xhci_free_container_ctx(xhci, dev->out_ctx);
+ kfree(dev);
+
return 0;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuah Khan <[email protected]>
commit be6123df1ea8f01ee2f896a16c2b7be3e4557a5a upstream.
stub_send_ret_submit() handles urb with a potential null transfer_buffer,
when it replays a packet with potential malicious data that could contain
a null buffer. Add a check for the condition when actual_length > 0 and
transfer_buffer is null.
Reported-by: Secunia Research <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/stub_tx.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -178,6 +178,13 @@ static int stub_send_ret_submit(struct s
memset(&pdu_header, 0, sizeof(pdu_header));
memset(&msg, 0, sizeof(msg));
+ if (urb->actual_length > 0 && !urb->transfer_buffer) {
+ dev_err(&sdev->udev->dev,
+ "urb: actual_length %d transfer_buffer null\n",
+ urb->actual_length);
+ return -1;
+ }
+
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
iovnum = 2 + urb->number_of_packets;
else
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Kozub <[email protected]>
commit 62354454625741f0569c2cbe45b2d192f8fd258e upstream.
There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails
with the following error:
[sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[sda] tag#0 Sense Key : Illegal Request [current]
[sda] tag#0 Add. Sense: Invalid field in cdb
The issue occurs both with UAS (occasionally) and mass storage
(immediately after mounting a FS on a disk in the enclosure).
Enabling US_FL_BROKEN_FUA quirk solves this issue.
This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure
for both UAS and mass storage.
Signed-off-by: David Kozub <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 7 +++++++
drivers/usb/storage/unusual_uas.h | 7 +++++++
2 files changed, 14 insertions(+)
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2131,6 +2131,13 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+/* Reported by David Kozub <[email protected]> */
+UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
+ "JMicron",
+ "JMS567",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA),
+
/*
* Patch by Constantin Baranov <[email protected]>
* Report by Andreas Koenecke.
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -139,6 +139,13 @@ UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x99
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_UAS),
+/* Reported-by: David Kozub <[email protected]> */
+UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
+ "JMicron",
+ "JMS567",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA),
+
/* Reported-by: Hans de Goede <[email protected]> */
UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
"VIA",
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 302ec300ef8a545a7fc7f667e5fd743b091c2eeb upstream.
Commit ecc0c469f277 ("autofs: don't fail mount for transient error") was
meant to replace an 'if' with a 'switch', but instead added the 'switch'
leaving the case in place.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: ecc0c469f277 ("autofs: don't fail mount for transient error")
Reported-by: Ben Hutchings <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Cc: Ian Kent <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/autofs4/waitq.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -174,7 +174,6 @@ static void autofs4_notify_daemon(struct
mutex_unlock(&sbi->wq_mutex);
- if (autofs4_write(sbi, pipe, &pkt, pktsz))
switch (ret = autofs4_write(sbi, pipe, &pkt, pktsz)) {
case 0:
break;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
[ Upstream commit 800a938f0bf9130c8256116649c0cc5806bfb2fd ]
If you write "-2 -3 -4" to the "versions" file, it will
notice that no versions are enabled, and nfsd_reset_versions()
is called.
This enables all major versions, not no minor versions.
So we lose the invariant that NFSv4 is only advertised when
at least one minor is enabled.
Fix the code to explicitly enable minor versions for v4,
change it to use nfsd_vers() to test and set, and simplify
the code.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfssvc.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -329,23 +329,20 @@ static void nfsd_last_thread(struct svc_
void nfsd_reset_versions(void)
{
- int found_one = 0;
int i;
- for (i = NFSD_MINVERS; i < NFSD_NRVERS; i++) {
- if (nfsd_program.pg_vers[i])
- found_one = 1;
- }
+ for (i = 0; i < NFSD_NRVERS; i++)
+ if (nfsd_vers(i, NFSD_TEST))
+ return;
- if (!found_one) {
- for (i = NFSD_MINVERS; i < NFSD_NRVERS; i++)
- nfsd_program.pg_vers[i] = nfsd_version[i];
-#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
- for (i = NFSD_ACL_MINVERS; i < NFSD_ACL_NRVERS; i++)
- nfsd_acl_program.pg_vers[i] =
- nfsd_acl_version[i];
-#endif
- }
+ for (i = 0; i < NFSD_NRVERS; i++)
+ if (i != 4)
+ nfsd_vers(i, NFSD_SET);
+ else {
+ int minor = 0;
+ while (nfsd_minorversion(minor, NFSD_SET) >= 0)
+ minor++;
+ }
}
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit 6be371b053dc86f11465cc1abce2e99bda0a0574 ]
When using the internal PHY it must be powered up when the MII is probed
or the PHY will not be detected. Since the PHY is powered up at reset
this has not been a problem. However, when the kernel is restarted with
kexec the PHY will likely be powered down when the kernel starts so it
will not be detected and the Ethernet link will not be established.
This commit explicitly powers up the internal PHY when the GENET driver
is probed to correct this behavior.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2598,6 +2598,7 @@ static int bcmgenet_probe(struct platfor
const void *macaddr;
struct resource *r;
int err = -EIO;
+ const char *phy_mode_str;
/* Up to GENET_MAX_MQ_CNT + 1 TX queues and a single RX queue */
dev = alloc_etherdev_mqs(sizeof(*priv), GENET_MAX_MQ_CNT + 1, 1);
@@ -2685,6 +2686,13 @@ static int bcmgenet_probe(struct platfor
if (IS_ERR(priv->clk_wol))
dev_warn(&priv->pdev->dev, "failed to get enet-wol clock\n");
+ /* If this is an internal GPHY, power it on now, before UniMAC is
+ * brought out of reset as absolutely no UniMAC activity is allowed
+ */
+ if (dn && !of_property_read_string(dn, "phy-mode", &phy_mode_str) &&
+ !strcasecmp(phy_mode_str, "internal"))
+ bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
+
err = reset_umac(priv);
if (err)
goto err_clk_disable;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit ffff71328a3c321f7c14cc1edd33577717037744 ]
The location of the RBUF overflow and error counters has moved between
different version of the GENET MAC. This commit corrects the driver to
read from the correct locations depending on the version of the GENET
MAC.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 60 ++++++++++++++++++++++---
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 10 ++--
2 files changed, 60 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1,7 +1,7 @@
/*
* Broadcom GENET (Gigabit Ethernet) controller driver
*
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -610,8 +610,9 @@ static const struct bcmgenet_stats bcmge
STAT_GENET_RUNT("rx_runt_bytes", mib.rx_runt_bytes),
/* Misc UniMAC counters */
STAT_GENET_MISC("rbuf_ovflow_cnt", mib.rbuf_ovflow_cnt,
- UMAC_RBUF_OVFL_CNT),
- STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt, UMAC_RBUF_ERR_CNT),
+ UMAC_RBUF_OVFL_CNT_V1),
+ STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt,
+ UMAC_RBUF_ERR_CNT_V1),
STAT_GENET_MISC("mdf_err_cnt", mib.mdf_err_cnt, UMAC_MDF_ERR_CNT),
};
@@ -651,6 +652,45 @@ static void bcmgenet_get_strings(struct
}
}
+static u32 bcmgenet_update_stat_misc(struct bcmgenet_priv *priv, u16 offset)
+{
+ u16 new_offset;
+ u32 val;
+
+ switch (offset) {
+ case UMAC_RBUF_OVFL_CNT_V1:
+ if (GENET_IS_V2(priv))
+ new_offset = RBUF_OVFL_CNT_V2;
+ else
+ new_offset = RBUF_OVFL_CNT_V3PLUS;
+
+ val = bcmgenet_rbuf_readl(priv, new_offset);
+ /* clear if overflowed */
+ if (val == ~0)
+ bcmgenet_rbuf_writel(priv, 0, new_offset);
+ break;
+ case UMAC_RBUF_ERR_CNT_V1:
+ if (GENET_IS_V2(priv))
+ new_offset = RBUF_ERR_CNT_V2;
+ else
+ new_offset = RBUF_ERR_CNT_V3PLUS;
+
+ val = bcmgenet_rbuf_readl(priv, new_offset);
+ /* clear if overflowed */
+ if (val == ~0)
+ bcmgenet_rbuf_writel(priv, 0, new_offset);
+ break;
+ default:
+ val = bcmgenet_umac_readl(priv, offset);
+ /* clear if overflowed */
+ if (val == ~0)
+ bcmgenet_umac_writel(priv, 0, offset);
+ break;
+ }
+
+ return val;
+}
+
static void bcmgenet_update_mib_counters(struct bcmgenet_priv *priv)
{
int i, j = 0;
@@ -674,10 +714,16 @@ static void bcmgenet_update_mib_counters
UMAC_MIB_START + j + offset);
break;
case BCMGENET_STAT_MISC:
- val = bcmgenet_umac_readl(priv, s->reg_offset);
- /* clear if overflowed */
- if (val == ~0)
- bcmgenet_umac_writel(priv, 0, s->reg_offset);
+ if (GENET_IS_V1(priv)) {
+ val = bcmgenet_umac_readl(priv, s->reg_offset);
+ /* clear if overflowed */
+ if (val == ~0)
+ bcmgenet_umac_writel(priv, 0,
+ s->reg_offset);
+ } else {
+ val = bcmgenet_update_stat_misc(priv,
+ s->reg_offset);
+ }
break;
}
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -196,7 +196,9 @@ struct bcmgenet_mib_counters {
#define MDIO_REG_SHIFT 16
#define MDIO_REG_MASK 0x1F
-#define UMAC_RBUF_OVFL_CNT 0x61C
+#define UMAC_RBUF_OVFL_CNT_V1 0x61C
+#define RBUF_OVFL_CNT_V2 0x80
+#define RBUF_OVFL_CNT_V3PLUS 0x94
#define UMAC_MPD_CTRL 0x620
#define MPD_EN (1 << 0)
@@ -206,7 +208,9 @@ struct bcmgenet_mib_counters {
#define UMAC_MPD_PW_MS 0x624
#define UMAC_MPD_PW_LS 0x628
-#define UMAC_RBUF_ERR_CNT 0x634
+#define UMAC_RBUF_ERR_CNT_V1 0x634
+#define RBUF_ERR_CNT_V2 0x84
+#define RBUF_ERR_CNT_V3PLUS 0x98
#define UMAC_MDF_ERR_CNT 0x638
#define UMAC_MDF_CTRL 0x650
#define UMAC_MDF_ADDR 0x654
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit 1ad3d225e5a40ca6c586989b4baaca710544c15a ]
The gap between the Tx status counters and the Rx RUNT counters is now
being added to allow correct reporting of the registers.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -705,13 +705,16 @@ static void bcmgenet_update_mib_counters
switch (s->type) {
case BCMGENET_STAT_NETDEV:
continue;
- case BCMGENET_STAT_MIB_RX:
- case BCMGENET_STAT_MIB_TX:
case BCMGENET_STAT_RUNT:
- if (s->type != BCMGENET_STAT_MIB_RX)
- offset = BCMGENET_STAT_OFFSET;
+ offset += BCMGENET_STAT_OFFSET;
+ /* fall through */
+ case BCMGENET_STAT_MIB_TX:
+ offset += BCMGENET_STAT_OFFSET;
+ /* fall through */
+ case BCMGENET_STAT_MIB_RX:
val = bcmgenet_umac_readl(priv,
UMAC_MIB_START + j + offset);
+ offset = 0; /* Reset Offset */
break;
case BCMGENET_STAT_MISC:
if (GENET_IS_V1(priv)) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
commit 911b79cde95c7da0ec02f48105358a36636b7a71 upstream.
If request_key() is used to find a keyring, only do the search part - don't
do the construction part if the keyring was not found by the search. We
don't really want keyrings in the negative instantiated state since the
rejected/negative instantiation error value in the payload is unioned with
keyring metadata.
Now the kernel gives an error:
request_key("keyring", "#selinux,bdekeyring", "keyring", KEY_SPEC_USER_SESSION_KEYRING) = -1 EPERM (Operation not permitted)
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/request_key.c | 3 +++
1 file changed, 3 insertions(+)
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -467,6 +467,9 @@ static struct key *construct_key_and_lin
if (ret)
goto error;
+ if (ctx->index_key.type == &key_type_keyring)
+ return ERR_PTR(-EPERM);
+
user = key_user_lookup(current_fsuid());
if (!user) {
ret = -ENOMEM;
On 12/18/2017 08:47 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.89 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Dec 20 15:26:44 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.89-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 12/18/2017 07:47 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.89 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Dec 20 15:26:44 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
total: 136 pass: 136 fail: 0
Qemu test results:
total: 112 pass: 112 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter