From: Arnd Bergmann <[email protected]>
When FW_LOADER is disabled, cxl fails to link:
arm-linux-gnueabi-ld: drivers/cxl/core/memdev.o: in function `cxl_memdev_setup_fw_upload':
memdev.c:(.text+0x90e): undefined reference to `firmware_upload_register'
memdev.c:(.text+0x93c): undefined reference to `firmware_upload_unregister'
In order to use the firmware_upload_register() function, both FW_LOADER
and FW_UPLOAD have to be enabled, which is a bit confusing. In addition,
the dependency is on the wrong symbol, as the caller is part of the
cxl_core.ko module, not the cxl_mem.ko module.
Fixes: 9521875bbe005 ("cxl: add a firmware update mechanism using the sysfs firmware loader")
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/cxl/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
index fcbf8295fde37..8ea1d340e4385 100644
--- a/drivers/cxl/Kconfig
+++ b/drivers/cxl/Kconfig
@@ -2,6 +2,8 @@
menuconfig CXL_BUS
tristate "CXL (Compute Express Link) Devices Support"
depends on PCI
+ select FW_LOADER
+ select FW_UPLOAD
select PCI_DOE
help
CXL is a bus that is electrically compatible with PCI Express, but
@@ -82,7 +84,6 @@ config CXL_PMEM
config CXL_MEM
tristate "CXL: Memory Expansion"
depends on CXL_PCI
- select FW_UPLOAD
default CXL_BUS
help
The CXL.mem protocol allows a device to act as a provider of "System
--
2.39.2
On 7/3/23 04:29, Arnd Bergmann wrote:
> From: Arnd Bergmann <[email protected]>
>
> When FW_LOADER is disabled, cxl fails to link:
>
> arm-linux-gnueabi-ld: drivers/cxl/core/memdev.o: in function `cxl_memdev_setup_fw_upload':
> memdev.c:(.text+0x90e): undefined reference to `firmware_upload_register'
> memdev.c:(.text+0x93c): undefined reference to `firmware_upload_unregister'
>
> In order to use the firmware_upload_register() function, both FW_LOADER
> and FW_UPLOAD have to be enabled, which is a bit confusing. In addition,
> the dependency is on the wrong symbol, as the caller is part of the
> cxl_core.ko module, not the cxl_mem.ko module.
>
> Fixes: 9521875bbe005 ("cxl: add a firmware update mechanism using the sysfs firmware loader")
> Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
> ---
> drivers/cxl/Kconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
> index fcbf8295fde37..8ea1d340e4385 100644
> --- a/drivers/cxl/Kconfig
> +++ b/drivers/cxl/Kconfig
> @@ -2,6 +2,8 @@
> menuconfig CXL_BUS
> tristate "CXL (Compute Express Link) Devices Support"
> depends on PCI
> + select FW_LOADER
> + select FW_UPLOAD
> select PCI_DOE
> help
> CXL is a bus that is electrically compatible with PCI Express, but
> @@ -82,7 +84,6 @@ config CXL_PMEM
> config CXL_MEM
> tristate "CXL: Memory Expansion"
> depends on CXL_PCI
> - select FW_UPLOAD
> default CXL_BUS
> help
> The CXL.mem protocol allows a device to act as a provider of "System
On 2023/7/3 19:29, Arnd Bergmann wrote:
> From: Arnd Bergmann<[email protected]>
>
> When FW_LOADER is disabled, cxl fails to link:
>
> arm-linux-gnueabi-ld: drivers/cxl/core/memdev.o: in function `cxl_memdev_setup_fw_upload':
> memdev.c:(.text+0x90e): undefined reference to `firmware_upload_register'
> memdev.c:(.text+0x93c): undefined reference to `firmware_upload_unregister'
>
> In order to use the firmware_upload_register() function, both FW_LOADER
> and FW_UPLOAD have to be enabled, which is a bit confusing. In addition,
> the dependency is on the wrong symbol, as the caller is part of the
> cxl_core.ko module, not the cxl_mem.ko module.
>
> Fixes: 9521875bbe005 ("cxl: add a firmware update mechanism using the sysfs firmware loader")
> Signed-off-by: Arnd Bergmann<[email protected]>
Hi Arnd,
It makes sense.
Reviewed-by: Xiao Yang <[email protected]>
Best Regards,
Xiao Yang