From: "Edward A. James" <[email protected]>
This series adds a hwmon pmbus driver for a POWER System power supply. The
core monitoring functionality is provided by pmbus.
Changes since v4:
* Relocate dt bindings documentation under hwmon.
Changes since v3:
* Change "fault" to "alarm" in the documentation.
Changes since v2:
* Renamed the driver again...
* Remove debugfs bool from pmbus_driver_info.
* Add comment for returning rc when reading STATUS_MFR_SPECIFIC fails.
Since v1:
* Renamed the driver.
* Removed non-hwmon attributes.
* Simplified word and byte data reads.
Edward A. James (3):
dt-bindings: hwmon: Document the IBM CCF power supply version 1
hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver
Documentation: hwmon: Document the IBM CFF power supply
.../devicetree/bindings/hwmon/ibm,cffps1.txt | 21 +++
Documentation/hwmon/ibm-cffps | 54 ++++++++
drivers/hwmon/pmbus/Kconfig | 10 ++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/ibm-cffps.c | 151 +++++++++++++++++++++
5 files changed, 237 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
create mode 100644 Documentation/hwmon/ibm-cffps
create mode 100644 drivers/hwmon/pmbus/ibm-cffps.c
--
1.8.3.1
From: "Edward A. James" <[email protected]>
Signed-off-by: Edward A. James <[email protected]>
---
Documentation/hwmon/ibm-cffps | 54 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/hwmon/ibm-cffps
diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps
new file mode 100644
index 0000000..e05ecd8
--- /dev/null
+++ b/Documentation/hwmon/ibm-cffps
@@ -0,0 +1,54 @@
+Kernel driver ibm-cffps
+=======================
+
+Supported chips:
+ * IBM Common Form Factor power supply
+
+Author: Eddie James <[email protected]>
+
+Description
+-----------
+
+This driver supports IBM Common Form Factor (CFF) power supplies. This driver
+is a client to the core PMBus driver.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported:
+
+curr1_alarm Output current over-current alarm.
+curr1_input Measured output current in mA.
+curr1_label "iout1"
+
+fan1_alarm Fan 1 warning.
+fan1_fault Fan 1 fault.
+fan1_input Fan 1 speed in RPM.
+fan2_alarm Fan 2 warning.
+fan2_fault Fan 2 fault.
+fan2_input Fan 2 speed in RPM.
+
+in1_alarm Input voltage under-voltage alarm.
+in1_input Measured input voltage in mV.
+in1_label "vin"
+in2_alarm Output voltage over-voltage alarm.
+in2_input Measured output voltage in mV.
+in2_label "vout1"
+
+power1_alarm Input fault or alarm.
+power1_input Measured input power in uW.
+power1_label "pin"
+
+temp1_alarm PSU inlet ambient temperature over-temperature alarm.
+temp1_input Measured PSU inlet ambient temp in millidegrees C.
+temp2_alarm Secondary rectifier temp over-temperature alarm.
+temp2_input Measured secondary rectifier temp in millidegrees C.
+temp3_alarm ORing FET temperature over-temperature alarm.
+temp3_input Measured ORing FET temperature in millidegrees C.
--
1.8.3.1
From: "Edward A. James" <[email protected]>
Add the driver to monitor IBM CFF power supplies with hwmon over
pmbus.
Signed-off-by: Edward A. James <[email protected]>
---
drivers/hwmon/pmbus/Kconfig | 10 +++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/ibm-cffps.c | 151 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 162 insertions(+)
create mode 100644 drivers/hwmon/pmbus/ibm-cffps.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 68d717a..f3de18a 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -37,6 +37,16 @@ config SENSORS_ADM1275
This driver can also be built as a module. If so, the module will
be called adm1275.
+config SENSORS_IBM_CFFPS
+ tristate "IBM Common Form Factor Power Supply"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for the IBM
+ Common Form Factor power supply.
+
+ This driver can also be built as a module. If so, the module will
+ be called ibm-cffps.
+
config SENSORS_IR35221
tristate "Infineon IR35221"
default n
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 75bb7ca..737fa4e 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
+obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
new file mode 100644
index 0000000..1a6294c
--- /dev/null
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+
+#include "pmbus.h"
+
+/* STATUS_MFR_SPECIFIC bits */
+#define CFFPS_MFR_FAN_FAULT BIT(0)
+#define CFFPS_MFR_THERMAL_FAULT BIT(1)
+#define CFFPS_MFR_OV_FAULT BIT(2)
+#define CFFPS_MFR_UV_FAULT BIT(3)
+#define CFFPS_MFR_PS_KILL BIT(4)
+#define CFFPS_MFR_OC_FAULT BIT(5)
+#define CFFPS_MFR_VAUX_FAULT BIT(6)
+#define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7)
+
+static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
+ int reg)
+{
+ int rc, mfr;
+
+ switch (reg) {
+ case PMBUS_STATUS_VOUT:
+ case PMBUS_STATUS_IOUT:
+ case PMBUS_STATUS_TEMPERATURE:
+ case PMBUS_STATUS_FAN_12:
+ rc = pmbus_read_byte_data(client, page, reg);
+ if (rc < 0)
+ return rc;
+
+ mfr = pmbus_read_byte_data(client, page,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfr < 0)
+ /*
+ * Return the status register instead of an error,
+ * since we successfully read status.
+ */
+ return rc;
+
+ /* Add MFR_SPECIFIC bits to the standard pmbus status regs. */
+ if (reg == PMBUS_STATUS_FAN_12) {
+ if (mfr & CFFPS_MFR_FAN_FAULT)
+ rc |= PB_FAN_FAN1_FAULT;
+ } else if (reg == PMBUS_STATUS_TEMPERATURE) {
+ if (mfr & CFFPS_MFR_THERMAL_FAULT)
+ rc |= PB_TEMP_OT_FAULT;
+ } else if (reg == PMBUS_STATUS_VOUT) {
+ if (mfr & (CFFPS_MFR_OV_FAULT | CFFPS_MFR_VAUX_FAULT))
+ rc |= PB_VOLTAGE_OV_FAULT;
+ if (mfr & CFFPS_MFR_UV_FAULT)
+ rc |= PB_VOLTAGE_UV_FAULT;
+ } else if (reg == PMBUS_STATUS_IOUT) {
+ if (mfr & CFFPS_MFR_OC_FAULT)
+ rc |= PB_IOUT_OC_FAULT;
+ if (mfr & CFFPS_MFR_CURRENT_SHARE_WARNING)
+ rc |= PB_CURRENT_SHARE_FAULT;
+ }
+ break;
+ default:
+ rc = -ENODATA;
+ break;
+ }
+
+ return rc;
+}
+
+static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
+ int reg)
+{
+ int rc, mfr;
+
+ switch (reg) {
+ case PMBUS_STATUS_WORD:
+ rc = pmbus_read_word_data(client, page, reg);
+ if (rc < 0)
+ return rc;
+
+ mfr = pmbus_read_byte_data(client, page,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfr < 0)
+ /*
+ * Return the status register instead of an error,
+ * since we successfully read status.
+ */
+ return rc;
+
+ if (mfr & CFFPS_MFR_PS_KILL)
+ rc |= PB_STATUS_OFF;
+ break;
+ default:
+ rc = -ENODATA;
+ break;
+ }
+
+ return rc;
+}
+
+static struct pmbus_driver_info ibm_cffps_info = {
+ .pages = 1,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
+ PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
+ .read_byte_data = ibm_cffps_read_byte_data,
+ .read_word_data = ibm_cffps_read_word_data,
+};
+
+static int ibm_cffps_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return pmbus_do_probe(client, id, &ibm_cffps_info);
+}
+
+static const struct i2c_device_id ibm_cffps_id[] = {
+ { "ibm_cffps1", 1 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ibm_cffps_id);
+
+static const struct of_device_id ibm_cffps_of_match[] = {
+ { .compatible = "ibm,cffps1" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ibm_cffps_of_match);
+
+static struct i2c_driver ibm_cffps_driver = {
+ .driver = {
+ .name = "ibm-cffps",
+ .of_match_table = ibm_cffps_of_match,
+ },
+ .probe = ibm_cffps_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ibm_cffps_id,
+};
+
+module_i2c_driver(ibm_cffps_driver);
+
+MODULE_AUTHOR("Eddie James");
+MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies");
+MODULE_LICENSE("GPL");
--
1.8.3.1
From: "Edward A. James" <[email protected]>
Signed-off-by: Edward A. James <[email protected]>
---
.../devicetree/bindings/hwmon/ibm,cffps1.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
new file mode 100644
index 0000000..f68a0a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
@@ -0,0 +1,21 @@
+Device-tree bindings for IBM Common Form Factor Power Supply Version 1
+----------------------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,cffps1";
+ - reg = < I2C bus address >; : Address of the power supply on the
+ I2C bus.
+
+Example:
+
+ i2c-bus@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ < more properties >
+
+ power-supply@68 {
+ compatible = "ibm,cffps1";
+ reg = <0x68>;
+ };
+ };
--
1.8.3.1
On 08/21/2017 02:46 PM, Eddie James wrote:
> From: "Edward A. James" <[email protected]>
>
> Signed-off-by: Edward A. James <[email protected]>
Forgot to add Rob Herring for the bindings.
Eddie
> ---
> .../devicetree/bindings/hwmon/ibm,cffps1.txt | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
> new file mode 100644
> index 0000000..f68a0a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
> @@ -0,0 +1,21 @@
> +Device-tree bindings for IBM Common Form Factor Power Supply Version 1
> +----------------------------------------------------------------------
> +
> +Required properties:
> + - compatible = "ibm,cffps1";
> + - reg = < I2C bus address >; : Address of the power supply on the
> + I2C bus.
> +
> +Example:
> +
> + i2c-bus@100 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + < more properties >
> +
> + power-supply@68 {
> + compatible = "ibm,cffps1";
> + reg = <0x68>;
> + };
> + };
On Mon, Aug 21, 2017 at 02:46:11PM -0500, Eddie James wrote:
> From: "Edward A. James" <[email protected]>
>
> Signed-off-by: Edward A. James <[email protected]>
> ---
> .../devicetree/bindings/hwmon/ibm,cffps1.txt | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
Acked-by: Rob Herring <[email protected]>
On Mon, Aug 21, 2017 at 02:46:11PM -0500, [email protected] wrote:
> From: "Edward A. James" <[email protected]>
>
> Signed-off-by: Edward A. James <[email protected]>
> Acked-by: Rob Herring <[email protected]>
Applied to hwmon-next
Thanks,
Guenter
> ---
> .../devicetree/bindings/hwmon/ibm,cffps1.txt | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
> new file mode 100644
> index 0000000..f68a0a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
> @@ -0,0 +1,21 @@
> +Device-tree bindings for IBM Common Form Factor Power Supply Version 1
> +----------------------------------------------------------------------
> +
> +Required properties:
> + - compatible = "ibm,cffps1";
> + - reg = < I2C bus address >; : Address of the power supply on the
> + I2C bus.
> +
> +Example:
> +
> + i2c-bus@100 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + < more properties >
> +
> + power-supply@68 {
> + compatible = "ibm,cffps1";
> + reg = <0x68>;
> + };
> + };
On Mon, Aug 21, 2017 at 02:46:12PM -0500, [email protected] wrote:
> From: "Edward A. James" <[email protected]>
>
> Add the driver to monitor IBM CFF power supplies with hwmon over
> pmbus.
>
> Signed-off-by: Edward A. James <[email protected]>
Applied to hwmon-next with the following changes:
- "default n" is unnecessary.
- include jiffies.h is unnecessary, but we need to include bitops.h.
Thanks,
Guenter
> ---
> drivers/hwmon/pmbus/Kconfig | 10 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/ibm-cffps.c | 151 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 162 insertions(+)
> create mode 100644 drivers/hwmon/pmbus/ibm-cffps.c
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 68d717a..f3de18a 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -37,6 +37,16 @@ config SENSORS_ADM1275
> This driver can also be built as a module. If so, the module will
> be called adm1275.
>
> +config SENSORS_IBM_CFFPS
> + tristate "IBM Common Form Factor Power Supply"
> + default n
> + help
> + If you say yes here you get hardware monitoring support for the IBM
> + Common Form Factor power supply.
> +
> + This driver can also be built as a module. If so, the module will
> + be called ibm-cffps.
> +
> config SENSORS_IR35221
> tristate "Infineon IR35221"
> default n
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 75bb7ca..737fa4e 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -5,6 +5,7 @@
> obj-$(CONFIG_PMBUS) += pmbus_core.o
> obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> +obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
> obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
> obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
> obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
> diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
> new file mode 100644
> index 0000000..1a6294c
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/ibm-cffps.c
> @@ -0,0 +1,151 @@
> +/*
> + * Copyright 2017 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +
> +#include "pmbus.h"
> +
> +/* STATUS_MFR_SPECIFIC bits */
> +#define CFFPS_MFR_FAN_FAULT BIT(0)
> +#define CFFPS_MFR_THERMAL_FAULT BIT(1)
> +#define CFFPS_MFR_OV_FAULT BIT(2)
> +#define CFFPS_MFR_UV_FAULT BIT(3)
> +#define CFFPS_MFR_PS_KILL BIT(4)
> +#define CFFPS_MFR_OC_FAULT BIT(5)
> +#define CFFPS_MFR_VAUX_FAULT BIT(6)
> +#define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7)
> +
> +static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
> + int reg)
> +{
> + int rc, mfr;
> +
> + switch (reg) {
> + case PMBUS_STATUS_VOUT:
> + case PMBUS_STATUS_IOUT:
> + case PMBUS_STATUS_TEMPERATURE:
> + case PMBUS_STATUS_FAN_12:
> + rc = pmbus_read_byte_data(client, page, reg);
> + if (rc < 0)
> + return rc;
> +
> + mfr = pmbus_read_byte_data(client, page,
> + PMBUS_STATUS_MFR_SPECIFIC);
> + if (mfr < 0)
> + /*
> + * Return the status register instead of an error,
> + * since we successfully read status.
> + */
> + return rc;
> +
> + /* Add MFR_SPECIFIC bits to the standard pmbus status regs. */
> + if (reg == PMBUS_STATUS_FAN_12) {
> + if (mfr & CFFPS_MFR_FAN_FAULT)
> + rc |= PB_FAN_FAN1_FAULT;
> + } else if (reg == PMBUS_STATUS_TEMPERATURE) {
> + if (mfr & CFFPS_MFR_THERMAL_FAULT)
> + rc |= PB_TEMP_OT_FAULT;
> + } else if (reg == PMBUS_STATUS_VOUT) {
> + if (mfr & (CFFPS_MFR_OV_FAULT | CFFPS_MFR_VAUX_FAULT))
> + rc |= PB_VOLTAGE_OV_FAULT;
> + if (mfr & CFFPS_MFR_UV_FAULT)
> + rc |= PB_VOLTAGE_UV_FAULT;
> + } else if (reg == PMBUS_STATUS_IOUT) {
> + if (mfr & CFFPS_MFR_OC_FAULT)
> + rc |= PB_IOUT_OC_FAULT;
> + if (mfr & CFFPS_MFR_CURRENT_SHARE_WARNING)
> + rc |= PB_CURRENT_SHARE_FAULT;
> + }
> + break;
> + default:
> + rc = -ENODATA;
> + break;
> + }
> +
> + return rc;
> +}
> +
> +static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
> + int reg)
> +{
> + int rc, mfr;
> +
> + switch (reg) {
> + case PMBUS_STATUS_WORD:
> + rc = pmbus_read_word_data(client, page, reg);
> + if (rc < 0)
> + return rc;
> +
> + mfr = pmbus_read_byte_data(client, page,
> + PMBUS_STATUS_MFR_SPECIFIC);
> + if (mfr < 0)
> + /*
> + * Return the status register instead of an error,
> + * since we successfully read status.
> + */
> + return rc;
> +
> + if (mfr & CFFPS_MFR_PS_KILL)
> + rc |= PB_STATUS_OFF;
> + break;
> + default:
> + rc = -ENODATA;
> + break;
> + }
> +
> + return rc;
> +}
> +
> +static struct pmbus_driver_info ibm_cffps_info = {
> + .pages = 1,
> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
> + PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
> + PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
> + PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
> + .read_byte_data = ibm_cffps_read_byte_data,
> + .read_word_data = ibm_cffps_read_word_data,
> +};
> +
> +static int ibm_cffps_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + return pmbus_do_probe(client, id, &ibm_cffps_info);
> +}
> +
> +static const struct i2c_device_id ibm_cffps_id[] = {
> + { "ibm_cffps1", 1 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, ibm_cffps_id);
> +
> +static const struct of_device_id ibm_cffps_of_match[] = {
> + { .compatible = "ibm,cffps1" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, ibm_cffps_of_match);
> +
> +static struct i2c_driver ibm_cffps_driver = {
> + .driver = {
> + .name = "ibm-cffps",
> + .of_match_table = ibm_cffps_of_match,
> + },
> + .probe = ibm_cffps_probe,
> + .remove = pmbus_do_remove,
> + .id_table = ibm_cffps_id,
> +};
> +
> +module_i2c_driver(ibm_cffps_driver);
> +
> +MODULE_AUTHOR("Eddie James");
> +MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies");
> +MODULE_LICENSE("GPL");
On Mon, Aug 21, 2017 at 02:46:13PM -0500, [email protected] wrote:
> From: "Edward A. James" <[email protected]>
>
> Signed-off-by: Edward A. James <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> Documentation/hwmon/ibm-cffps | 54 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
> create mode 100644 Documentation/hwmon/ibm-cffps
>
> diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps
> new file mode 100644
> index 0000000..e05ecd8
> --- /dev/null
> +++ b/Documentation/hwmon/ibm-cffps
> @@ -0,0 +1,54 @@
> +Kernel driver ibm-cffps
> +=======================
> +
> +Supported chips:
> + * IBM Common Form Factor power supply
> +
> +Author: Eddie James <[email protected]>
> +
> +Description
> +-----------
> +
> +This driver supports IBM Common Form Factor (CFF) power supplies. This driver
> +is a client to the core PMBus driver.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-devices for
> +details.
> +
> +Sysfs entries
> +-------------
> +
> +The following attributes are supported:
> +
> +curr1_alarm Output current over-current alarm.
> +curr1_input Measured output current in mA.
> +curr1_label "iout1"
> +
> +fan1_alarm Fan 1 warning.
> +fan1_fault Fan 1 fault.
> +fan1_input Fan 1 speed in RPM.
> +fan2_alarm Fan 2 warning.
> +fan2_fault Fan 2 fault.
> +fan2_input Fan 2 speed in RPM.
> +
> +in1_alarm Input voltage under-voltage alarm.
> +in1_input Measured input voltage in mV.
> +in1_label "vin"
> +in2_alarm Output voltage over-voltage alarm.
> +in2_input Measured output voltage in mV.
> +in2_label "vout1"
> +
> +power1_alarm Input fault or alarm.
> +power1_input Measured input power in uW.
> +power1_label "pin"
> +
> +temp1_alarm PSU inlet ambient temperature over-temperature alarm.
> +temp1_input Measured PSU inlet ambient temp in millidegrees C.
> +temp2_alarm Secondary rectifier temp over-temperature alarm.
> +temp2_input Measured secondary rectifier temp in millidegrees C.
> +temp3_alarm ORing FET temperature over-temperature alarm.
> +temp3_input Measured ORing FET temperature in millidegrees C.