This is the start of the stable review cycle for the 5.4.43 release.
There are 111 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 28 May 2020 18:36:22 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.43-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.43-rc1
Phil Auld <[email protected]>
sched/fair: Fix enqueue_task_fair() warning some more
Vincent Guittot <[email protected]>
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
Vincent Guittot <[email protected]>
sched/fair: Reorder enqueue/dequeue_task_fair path
Loïc Yhuel <[email protected]>
tpm: check event log version before reading final events
David Howells <[email protected]>
rxrpc: Fix ack discard
David Howells <[email protected]>
rxrpc: Trace discarded ACKs
Fabrice Gasnier <[email protected]>
iio: adc: stm32-dfsdm: fix device used to request dma
Peter Ujfalusi <[email protected]>
iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
Fabrice Gasnier <[email protected]>
iio: adc: stm32-adc: fix device used to request dma
Peter Ujfalusi <[email protected]>
iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
Josh Poimboeuf <[email protected]>
x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks
Jakub Sitnicki <[email protected]>
flow_dissector: Drop BPF flow dissector prog ref on netns cleanup
Philipp Rudo <[email protected]>
s390/kexec_file: fix initrd location for kdump kernel
Qiushi Wu <[email protected]>
rxrpc: Fix a memory leak in rxkad_verify_response()
David Howells <[email protected]>
rxrpc: Fix the excessive initial retransmission timeout
Marco Elver <[email protected]>
kasan: disable branch tracing for core runtime
John Hubbard <[email protected]>
rapidio: fix an error in get_user_pages_fast() error handling
David Hildenbrand <[email protected]>
device-dax: don't leak kernel memory to user space after unloading kmem
Gerald Schaefer <[email protected]>
s390/kaslr: add support for R_390_JMP_SLOT relocation type
Niklas Schnelle <[email protected]>
s390/pci: Fix s390_mmio_read/write with MIO
Wei Yongjun <[email protected]>
ipack: tpci200: fix error return code in tpci200_register()
Alexander Usyskin <[email protected]>
mei: release me_cl object reference
Sagar Shrikant Kadam <[email protected]>
tty: serial: add missing spin_lock_init for SiFive serial console
Klaus Doth <[email protected]>
misc: rtsx: Add short delay after exit from ASPM
Gregory CLEMENT <[email protected]>
iio: adc: ti-ads8344: Fix channel selection
Christophe JAILLET <[email protected]>
iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'
Christophe JAILLET <[email protected]>
iio: sca3000: Remove an erroneous 'get_device()'
Oscar Carter <[email protected]>
staging: greybus: Fix uninitialized scalar variable
Wei Yongjun <[email protected]>
staging: kpc2000: fix error return code in kp2000_pcie_probe()
Dragos Bogdan <[email protected]>
staging: iio: ad2s1210: Fix SPI reading
Geert Uytterhoeven <[email protected]>
media: fdp1: Fix R-Car M3-N naming in debug message
Bob Peterson <[email protected]>
Revert "gfs2: Don't demote a glock until its revokes are written"
Kees Cook <[email protected]>
kbuild: Remove debug info from kallsyms linking
Daniel Borkmann <[email protected]>
bpf: Avoid setting bpf insns pages read-only when prog is jited
Michael Ellerman <[email protected]>
powerpc/64s: Disable STRICT_KERNEL_RWX
Russell Currey <[email protected]>
powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE
Chris Wilson <[email protected]>
drm/i915: Propagate error from completed fences
Colin Xu <[email protected]>
drm/i915/gvt: Init DPLL/DDI vreg for virtual display instead of inheritance.
Ilya Dryomov <[email protected]>
vsprintf: don't obfuscate NULL and error pointers
Cristian Ciocaltea <[email protected]>
dmaengine: owl: Use correct lock in owl_dma_get_pchan()
Vladimir Murzin <[email protected]>
dmaengine: dmatest: Restore default for channel
Dan Carpenter <[email protected]>
drm/etnaviv: Fix a leak in submit_pin_objects()
Christophe JAILLET <[email protected]>
dmaengine: tegra210-adma: Fix an error handling path in 'tegra_adma_probe()'
Xiyu Yang <[email protected]>
apparmor: Fix aa_label refcnt leak in policy_update
Xiyu Yang <[email protected]>
apparmor: fix potential label refcnt leak in aa_change_profile
Navid Emamdoost <[email protected]>
apparmor: Fix use-after-free in aa_audit_rule_init
Christian Gmeiner <[email protected]>
drm/etnaviv: fix perfmon domain interation
Keno Fischer <[email protected]>
arm64: Fix PTRACE_SYSEMU semantics
Bodo Stroesser <[email protected]>
scsi: target: Put lun_ref at end of tmr processing
Ewan D. Milne <[email protected]>
scsi: qla2xxx: Do not log message when reading port speed via sysfs
PeiSen Hou <[email protected]>
ALSA: hda/realtek - Add more fixup entries for Clevo machines
Christian Lachner <[email protected]>
ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Xtreme
Brent Lu <[email protected]>
ALSA: pcm: fix incorrect hw_base increase
Scott Bahling <[email protected]>
ALSA: iec1712: Initialize STDSP24 properly when using the model=staudio option
Babu Moger <[email protected]>
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
Jian-Hong Pan <[email protected]>
ALSA: hda/realtek: Enable headset mic of ASUS UX581LV with ALC295
Jian-Hong Pan <[email protected]>
ALSA: hda/realtek - Enable headset mic of ASUS UX550GE with ALC295
Chris Chiu <[email protected]>
ALSA: hda/realtek - Enable headset mic of ASUS GL503VM with ALC295
Mike Pozulp <[email protected]>
ALSA: hda/realtek: Add quirk for Samsung Notebook
Kailang Yang <[email protected]>
ALSA: hda/realtek - Add HP new mute led supported for ALC236
Kailang Yang <[email protected]>
ALSA: hda/realtek - Add supported new mute Led for HP
Takashi Iwai <[email protected]>
ALSA: hda: Manage concurrent reg access more properly
Pierre-Louis Bossart <[email protected]>
ALSA: hda: patch_realtek: fix empty macro usage in if block
Michał Mirosław <[email protected]>
ALSA: hda - constify and cleanup static NodeID tables
Aymeric Agon-Rambosson <[email protected]>
scripts/gdb: repair rb_first() and rb_last()
Thomas Gleixner <[email protected]>
ARM: futex: Address build warning
Peter Xu <[email protected]>
KVM: selftests: Fix build for evmcs.h
Aurabindo Pillai <[email protected]>
drm/amd/display: Prevent dpcd reads with passive dongles
Joerg Roedel <[email protected]>
iommu/amd: Call domain_flush_complete() in update_domain()
Hans de Goede <[email protected]>
platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA
Alan Stern <[email protected]>
USB: core: Fix misleading driver bug report
Maxim Petrov <[email protected]>
stmmac: fix pointer check after utilization in stmmac_interrupt
Wu Bo <[email protected]>
ceph: fix double unlock in handle_cap_export()
Hans de Goede <[email protected]>
HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dock
Yoshiyuki Kurauchi <[email protected]>
gtp: set NLM_F_MULTI flag in gtp_genl_dump_pdp()
Thomas Gleixner <[email protected]>
x86/apic: Move TSC deadline timer debug printk
Alan Maguire <[email protected]>
ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set
Juliet Kim <[email protected]>
ibmvnic: Skip fatal error reset after passive init
Rick Edgecombe <[email protected]>
x86/mm/cpa: Flush direct map alias during cpa
Daniel Playfair Cal <[email protected]>
HID: i2c-hid: reset Synaptics SYNA2393 on resume
Tyrel Datwyler <[email protected]>
scsi: ibmvscsi: Fix WARN_ON during event pool release
Gavin Shan <[email protected]>
net/ena: Fix build warning in ena_xdp_set()
James Hilliard <[email protected]>
component: Silence bind error on -EPROBE_DEFER
Richard Clark <[email protected]>
aquantia: Fix the media type of AQC100 ethernet controller in the driver
Stefano Garzarella <[email protected]>
vhost/vsock: fix packet delivery order to monitoring devices
Xiyu Yang <[email protected]>
configfs: fix config_item refcnt leak in configfs_rmdir()
Quinn Tran <[email protected]>
scsi: qla2xxx: Delete all sessions before unregister local nvme port
Arun Easi <[email protected]>
scsi: qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV
Jiri Kosina <[email protected]>
HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY instead
Artem Borisov <[email protected]>
HID: alps: Add AUI1657 device ID
Sebastian Reichel <[email protected]>
HID: multitouch: add eGalaxTouch P80H84 support
Frédéric Pierret (fepitre) <[email protected]>
gcc-common.h: Update for GCC 10
Masahiro Yamada <[email protected]>
net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
Masahiro Yamada <[email protected]>
kbuild: avoid concurrency issue in parallel building dtbs and dtbs_check
Ricardo Ribalda Delgado <[email protected]>
mtd: Fix mtd not registered due to nvmem name collision
David Howells <[email protected]>
afs: Don't unlock fetched data pages until the op completes successfully
Richard Weinberger <[email protected]>
ubi: Fix seq_file usage in detailed_erase_block_info debugfs file
Christophe JAILLET <[email protected]>
i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'
Dan Carpenter <[email protected]>
evm: Fix a small race in init_desc()
Alexander Monakov <[email protected]>
iommu/amd: Fix over-read of ACPI UID from IVRS table
Alain Volmat <[email protected]>
i2c: fix missing pm_runtime_put_sync in i2c_device_probe
Christoph Hellwig <[email protected]>
ubifs: remove broken lazytime support
Al Viro <[email protected]>
fix multiplication overflow in copy_fdtable()
Miquel Raynal <[email protected]>
mtd: spinand: Propagate ECC information to the MTD structure
Rafael J. Wysocki <[email protected]>
ACPI: EC: PM: Avoid flushing EC work when EC GPE is inactive
Eric Biggers <[email protected]>
ubifs: fix wrong use of crypto_shash_descsize()
Roberto Sassu <[email protected]>
ima: Fix return value of ima_write_policy()
Roberto Sassu <[email protected]>
evm: Check also if *tfm is an error pointer in init_desc()
Roberto Sassu <[email protected]>
ima: Set file->f_mode instead of file->f_flags in ima_calc_file_hash()
Miaohe Lin <[email protected]>
KVM: SVM: Fix potential memory leak in svm_cpu_init()
Kevin Hao <[email protected]>
i2c: dev: Fix the race between the release of i2c_dev and cdev
-------------
Diffstat:
Makefile | 12 +-
arch/arm/include/asm/futex.h | 9 +-
arch/arm64/kernel/ptrace.c | 7 +-
arch/powerpc/Kconfig | 2 +-
arch/s390/include/asm/pci_io.h | 10 +-
arch/s390/kernel/machine_kexec_file.c | 2 +-
arch/s390/kernel/machine_kexec_reloc.c | 1 +
arch/s390/pci/pci_mmio.c | 213 ++++++++++++++++++-
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kernel/apic/apic.c | 27 +--
arch/x86/kernel/unwind_orc.c | 7 +
arch/x86/kvm/svm.c | 13 +-
arch/x86/kvm/vmx/vmx.c | 18 --
arch/x86/kvm/x86.c | 17 ++
arch/x86/mm/pageattr.c | 12 +-
drivers/acpi/ec.c | 6 +-
drivers/acpi/sleep.c | 15 +-
drivers/base/component.c | 8 +-
drivers/dax/kmem.c | 14 +-
drivers/dma/dmatest.c | 9 +-
drivers/dma/owl-dma.c | 8 +-
drivers/dma/tegra210-adma.c | 2 +-
drivers/firmware/efi/libstub/tpm.c | 5 +-
drivers/firmware/efi/tpm.c | 5 +-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 17 +-
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 4 +-
drivers/gpu/drm/etnaviv/etnaviv_perfmon.c | 2 +-
drivers/gpu/drm/i915/gvt/display.c | 49 ++++-
drivers/gpu/drm/i915/i915_request.c | 4 +-
drivers/hid/hid-alps.c | 1 +
drivers/hid/hid-ids.h | 7 +-
drivers/hid/hid-multitouch.c | 3 +
drivers/hid/hid-quirks.c | 1 +
drivers/hid/i2c-hid/i2c-hid-core.c | 2 +
drivers/i2c/i2c-core-base.c | 22 +-
drivers/i2c/i2c-dev.c | 48 +++--
drivers/i2c/muxes/i2c-demux-pinctrl.c | 1 +
drivers/iio/accel/sca3000.c | 2 +-
drivers/iio/adc/stm32-adc.c | 20 +-
drivers/iio/adc/stm32-dfsdm-adc.c | 36 +++-
drivers/iio/adc/ti-ads8344.c | 8 +-
drivers/iio/dac/vf610_dac.c | 1 +
drivers/iommu/amd_iommu.c | 1 +
drivers/iommu/amd_iommu_init.c | 9 +-
drivers/ipack/carriers/tpci200.c | 1 +
drivers/media/platform/rcar_fdp1.c | 2 +-
drivers/misc/cardreader/rtsx_pcr.c | 3 +
drivers/misc/mei/client.c | 2 +
drivers/mtd/mtdcore.c | 2 +-
drivers/mtd/nand/spi/core.c | 4 +
drivers/mtd/ubi/debug.c | 12 +-
drivers/net/ethernet/amazon/ena/ena_netdev.h | 2 +-
.../net/ethernet/aquantia/atlantic/aq_pci_func.c | 2 +-
drivers/net/ethernet/ibm/ibmvnic.c | 3 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 +-
drivers/net/gtp.c | 9 +-
drivers/platform/x86/asus-nb-wmi.c | 24 +++
drivers/rapidio/devices/rio_mport_cdev.c | 5 +
drivers/scsi/ibmvscsi/ibmvscsi.c | 4 -
drivers/scsi/qla2xxx/qla_attr.c | 5 +-
drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
drivers/staging/greybus/uart.c | 4 +-
drivers/staging/iio/resolver/ad2s1210.c | 17 +-
drivers/staging/kpc2000/kpc2000/core.c | 9 +-
drivers/target/target_core_transport.c | 1 +
drivers/tty/serial/sifive.c | 1 +
drivers/usb/core/message.c | 4 +-
drivers/vhost/vsock.c | 10 +-
fs/afs/fs_probe.c | 18 +-
fs/afs/fsclient.c | 8 +-
fs/afs/vl_probe.c | 18 +-
fs/afs/yfsclient.c | 8 +-
fs/ceph/caps.c | 1 +
fs/configfs/dir.c | 1 +
fs/file.c | 2 +-
fs/gfs2/glock.c | 3 -
fs/ubifs/auth.c | 17 +-
fs/ubifs/file.c | 6 +-
fs/ubifs/replay.c | 13 +-
include/linux/filter.h | 8 +-
include/net/af_rxrpc.h | 2 +-
include/net/drop_monitor.h | 2 +-
include/sound/hda_regmap.h | 3 +
include/sound/hdaudio.h | 1 +
include/trace/events/rxrpc.h | 52 ++++-
kernel/sched/fair.c | 50 +++--
lib/test_printf.c | 19 +-
lib/vsprintf.c | 7 +
mm/kasan/Makefile | 8 +-
mm/kasan/generic.c | 1 -
mm/kasan/tags.c | 1 -
net/core/flow_dissector.c | 26 ++-
net/rxrpc/Makefile | 1 +
net/rxrpc/ar-internal.h | 25 ++-
net/rxrpc/call_accept.c | 2 +-
net/rxrpc/call_event.c | 22 +-
net/rxrpc/input.c | 44 +++-
net/rxrpc/misc.c | 5 -
net/rxrpc/output.c | 9 +-
net/rxrpc/peer_event.c | 46 ----
net/rxrpc/peer_object.c | 12 +-
net/rxrpc/proc.c | 8 +-
net/rxrpc/rtt.c | 195 +++++++++++++++++
net/rxrpc/rxkad.c | 3 +-
net/rxrpc/sendmsg.c | 26 +--
net/rxrpc/sysctl.c | 9 -
scripts/gcc-plugins/Makefile | 1 +
scripts/gcc-plugins/gcc-common.h | 4 +
scripts/gdb/linux/rbtree.py | 4 +-
scripts/link-vmlinux.sh | 28 ++-
security/apparmor/apparmorfs.c | 3 +-
security/apparmor/audit.c | 3 +-
security/apparmor/domain.c | 3 +-
security/integrity/evm/evm_crypto.c | 44 ++--
security/integrity/ima/ima_crypto.c | 12 +-
security/integrity/ima/ima_fs.c | 3 +-
sound/core/pcm_lib.c | 1 +
sound/hda/hdac_device.c | 1 +
sound/hda/hdac_regmap.c | 142 +++++++++----
sound/pci/hda/hda_codec.c | 30 +--
sound/pci/hda/hda_generic.c | 6 +-
sound/pci/hda/hda_local.h | 2 +
sound/pci/hda/patch_analog.c | 6 +-
sound/pci/hda/patch_ca0132.c | 12 +-
sound/pci/hda/patch_conexant.c | 6 +-
sound/pci/hda/patch_hdmi.c | 2 +-
sound/pci/hda/patch_realtek.c | 232 +++++++++++++++++----
sound/pci/hda/patch_sigmatel.c | 4 +-
sound/pci/hda/patch_via.c | 6 +-
sound/pci/ice1712/ice1712.c | 3 +-
tools/testing/selftests/ftrace/ftracetest | 8 +-
tools/testing/selftests/kvm/include/evmcs.h | 4 +-
tools/testing/selftests/kvm/lib/x86_64/vmx.c | 3 +
133 files changed, 1451 insertions(+), 600 deletions(-)
From: Qiushi Wu <[email protected]>
commit f45d01f4f30b53c3a0a1c6c1c154acb7ff74ab9f upstream.
A ticket was not released after a call of the function
"rxkad_decrypt_ticket" failed. Thus replace the jump target
"temporary_error_free_resp" by "temporary_error_free_ticket".
Fixes: 8c2f826dc3631 ("rxrpc: Don't put crypto buffers on the stack")
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: Markus Elfring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/rxkad.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -1148,7 +1148,7 @@ static int rxkad_verify_response(struct
ret = rxkad_decrypt_ticket(conn, skb, ticket, ticket_len, &session_key,
&expiry, _abort_code);
if (ret < 0)
- goto temporary_error_free_resp;
+ goto temporary_error_free_ticket;
/* use the session key from inside the ticket to decrypt the
* response */
@@ -1230,7 +1230,6 @@ protocol_error:
temporary_error_free_ticket:
kfree(ticket);
-temporary_error_free_resp:
kfree(response);
temporary_error:
/* Ignore the response packet if we got a temporary error such as
From: Peter Ujfalusi <[email protected]>
[ Upstream commit 735404b846dffcb320264f62b76e6f70012214dd ]
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.
By using dma_request_chan() directly the driver can support deferred
probing against DMA.
Signed-off-by: Peter Ujfalusi <[email protected]>
Acked-by: Fabrice Gasnier <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/stm32-adc.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 9f63ceb15865..a2279cccb584 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1763,9 +1763,21 @@ static int stm32_adc_dma_request(struct iio_dev *indio_dev)
struct dma_slave_config config;
int ret;
- adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
- if (!adc->dma_chan)
+ adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+ if (IS_ERR(adc->dma_chan)) {
+ ret = PTR_ERR(adc->dma_chan);
+ if (ret != -ENODEV) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&indio_dev->dev,
+ "DMA channel request failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ /* DMA is optional: fall back to IRQ mode */
+ adc->dma_chan = NULL;
return 0;
+ }
adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
STM32_DMA_BUFFER_SIZE,
--
2.25.1
From: Joerg Roedel <[email protected]>
[ Upstream commit f44a4d7e4f1cdef73c90b1dc749c4d8a7372a8eb ]
The update_domain() function is expected to also inform the hardware
about domain changes. This needs a COMPLETION_WAIT command to be sent
to all IOMMUs which use the domain.
Signed-off-by: Joerg Roedel <[email protected]>
Tested-by: Qian Cai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd_iommu.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index bc7771498342..32de8e7bb8b4 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -2386,6 +2386,7 @@ static void update_domain(struct protection_domain *domain)
domain_flush_devices(domain);
domain_flush_tlb_pde(domain);
+ domain_flush_complete(domain);
}
static int dir2prot(enum dma_data_direction direction)
--
2.25.1
From: Fabrice Gasnier <[email protected]>
[ Upstream commit 52cd91c27f3908b88e8b25aed4a4d20660abcc45 ]
DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink
Fix this by using device struct from platform device to request dma chan.
Fixes: 2763ea0585c99 ("iio: adc: stm32: add optional dma support")
Signed-off-by: Fabrice Gasnier <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/stm32-adc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index a2279cccb584..94fde39d9ff7 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1757,18 +1757,18 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
return 0;
}
-static int stm32_adc_dma_request(struct iio_dev *indio_dev)
+static int stm32_adc_dma_request(struct device *dev, struct iio_dev *indio_dev)
{
struct stm32_adc *adc = iio_priv(indio_dev);
struct dma_slave_config config;
int ret;
- adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+ adc->dma_chan = dma_request_chan(dev, "rx");
if (IS_ERR(adc->dma_chan)) {
ret = PTR_ERR(adc->dma_chan);
if (ret != -ENODEV) {
if (ret != -EPROBE_DEFER)
- dev_err(&indio_dev->dev,
+ dev_err(dev,
"DMA channel request failed with %d\n",
ret);
return ret;
@@ -1874,7 +1874,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- ret = stm32_adc_dma_request(indio_dev);
+ ret = stm32_adc_dma_request(dev, indio_dev);
if (ret < 0)
return ret;
--
2.25.1
From: Hans de Goede <[email protected]>
[ Upstream commit 3bd12da7f50b8bc191fcb3bab1f55c582234df59 ]
asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.
Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.
This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/asus-nb-wmi.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index b361c73636a4..0d42477946f3 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -514,9 +514,33 @@ static struct asus_wmi_driver asus_nb_wmi_driver = {
.detect_quirks = asus_nb_wmi_quirks,
};
+static const struct dmi_system_id asus_nb_wmi_blacklist[] __initconst = {
+ {
+ /*
+ * asus-nb-wm adds no functionality. The T100TA has a detachable
+ * USB kbd, so no hotkeys and it has no WMI rfkill; and loading
+ * asus-nb-wm causes the camera LED to turn and _stay_ on.
+ */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+ },
+ },
+ {
+ /* The Asus T200TA has the same issue as the T100TA */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T200TA"),
+ },
+ },
+ {} /* Terminating entry */
+};
static int __init asus_nb_wmi_init(void)
{
+ if (dmi_check_system(asus_nb_wmi_blacklist))
+ return -ENODEV;
+
return asus_wmi_register_driver(&asus_nb_wmi_driver);
}
--
2.25.1
From: Aymeric Agon-Rambosson <[email protected]>
[ Upstream commit 50e36be1fb9572b2e4f2753340bdce3116bf2ce7 ]
The current implementations of the rb_first() and rb_last() gdb
functions have a variable that references itself in its instanciation,
which causes the function to throw an error if a specific condition on
the argument is met. The original author rather intended to reference
the argument and made a typo. Referring the argument instead makes the
function work as intended.
Signed-off-by: Aymeric Agon-Rambosson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Cc: Jan Kiszka <[email protected]>
Cc: Kieran Bingham <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: Nikolay Borisov <[email protected]>
Cc: Jackie Liu <[email protected]>
Cc: Jason Wessel <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/gdb/linux/rbtree.py | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/scripts/gdb/linux/rbtree.py b/scripts/gdb/linux/rbtree.py
index 39db889b874c..c4b991607917 100644
--- a/scripts/gdb/linux/rbtree.py
+++ b/scripts/gdb/linux/rbtree.py
@@ -12,7 +12,7 @@ rb_node_type = utils.CachedType("struct rb_node")
def rb_first(root):
if root.type == rb_root_type.get_type():
- node = node.address.cast(rb_root_type.get_type().pointer())
+ node = root.address.cast(rb_root_type.get_type().pointer())
elif root.type != rb_root_type.get_type().pointer():
raise gdb.GdbError("Must be struct rb_root not {}".format(root.type))
@@ -28,7 +28,7 @@ def rb_first(root):
def rb_last(root):
if root.type == rb_root_type.get_type():
- node = node.address.cast(rb_root_type.get_type().pointer())
+ node = root.address.cast(rb_root_type.get_type().pointer())
elif root.type != rb_root_type.get_type().pointer():
raise gdb.GdbError("Must be struct rb_root not {}".format(root.type))
--
2.25.1
From: Maxim Petrov <[email protected]>
[ Upstream commit f42234ffd531ca6b13d9da02faa60b72eccf8334 ]
The paranoidal pointer check in IRQ handler looks very strange - it
really protects us only against bogus drivers which request IRQ line
with null pointer dev_id. However, the code fragment is incorrect
because the dev pointer is used before the actual check which leads
to undefined behavior. Remove the check to avoid confusing people
with incorrect code.
Signed-off-by: Maxim Petrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 89a6ae2b17e3..1623516efb17 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3832,7 +3832,7 @@ static int stmmac_set_features(struct net_device *netdev,
/**
* stmmac_interrupt - main ISR
* @irq: interrupt number.
- * @dev_id: to pass the net device pointer.
+ * @dev_id: to pass the net device pointer (must be valid).
* Description: this is the main driver interrupt service routine.
* It can call:
* o DMA service routine (to manage incoming frame reception and transmission
@@ -3856,11 +3856,6 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
if (priv->irq_wake)
pm_wakeup_event(priv->device, 0);
- if (unlikely(!dev)) {
- netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__);
- return IRQ_NONE;
- }
-
/* Check if adapter is up */
if (test_bit(STMMAC_DOWN, &priv->state))
return IRQ_HANDLED;
--
2.25.1
From: David Howells <[email protected]>
[ Upstream commit 441fdee1eaf050ef0040bde0d7af075c1c6a6d8b ]
The Rx protocol has a "previousPacket" field in it that is not handled in
the same way by all protocol implementations. Sometimes it contains the
serial number of the last DATA packet received, sometimes the sequence
number of the last DATA packet received and sometimes the highest sequence
number so far received.
AF_RXRPC is using this to weed out ACKs that are out of date (it's possible
for ACK packets to get reordered on the wire), but this does not work with
OpenAFS which will just stick the sequence number of the last packet seen
into previousPacket.
The issue being seen is that big AFS FS.StoreData RPC (eg. of ~256MiB) are
timing out when partly sent. A trace was captured, with an additional
tracepoint to show ACKs being discarded in rxrpc_input_ack(). Here's an
excerpt showing the problem.
52873.203230: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 0002449c q=00024499 fl=09
A DATA packet with sequence number 00024499 has been transmitted (the "q="
field).
...
52873.243296: rxrpc_rx_ack: c=000004ae 00012a2b DLY r=00024499 f=00024497 p=00024496 n=0
52873.243376: rxrpc_rx_ack: c=000004ae 00012a2c IDL r=0002449b f=00024499 p=00024498 n=0
52873.243383: rxrpc_rx_ack: c=000004ae 00012a2d OOS r=0002449d f=00024499 p=0002449a n=2
The Out-Of-Sequence ACK indicates that the server didn't see DATA sequence
number 00024499, but did see seq 0002449a (previousPacket, shown as "p=",
skipped the number, but firstPacket, "f=", which shows the bottom of the
window is set at that point).
52873.252663: rxrpc_retransmit: c=000004ae q=24499 a=02 xp=14581537
52873.252664: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244bc q=00024499 fl=0b *RETRANS*
The packet has been retransmitted. Retransmission recurs until the peer
says it got the packet.
52873.271013: rxrpc_rx_ack: c=000004ae 00012a31 OOS r=000244a1 f=00024499 p=0002449e n=6
More OOS ACKs indicate that the other packets that are already in the
transmission pipeline are being received. The specific-ACK list is up to 6
ACKs and NAKs.
...
52873.284792: rxrpc_rx_ack: c=000004ae 00012a49 OOS r=000244b9 f=00024499 p=000244b6 n=30
52873.284802: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=63505500
52873.284804: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c2 q=00024499 fl=0b *RETRANS*
52873.287468: rxrpc_rx_ack: c=000004ae 00012a4a OOS r=000244ba f=00024499 p=000244b7 n=31
52873.287478: rxrpc_rx_ack: c=000004ae 00012a4b OOS r=000244bb f=00024499 p=000244b8 n=32
At this point, the server's receive window is full (n=32) with presumably 1
NAK'd packet and 31 ACK'd packets. We can't transmit any more packets.
52873.287488: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=61327980
52873.287489: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c3 q=00024499 fl=0b *RETRANS*
52873.293850: rxrpc_rx_ack: c=000004ae 00012a4c DLY r=000244bc f=000244a0 p=00024499 n=25
And now we've received an ACK indicating that a DATA retransmission was
received. 7 packets have been processed (the occupied part of the window
moved, as indicated by f= and n=).
52873.293853: rxrpc_rx_discard_ack: c=000004ae r=00012a4c 000244a0<00024499 00024499<000244b8
However, the DLY ACK gets discarded because its previousPacket has gone
backwards (from p=000244b8, in the ACK at 52873.287478 to p=00024499 in the
ACK at 52873.293850).
We then end up in a continuous cycle of retransmit/discard. kafs fails to
update its window because it's discarding the ACKs and can't transmit an
extra packet that would clear the issue because the window is full.
OpenAFS doesn't change the previousPacket value in the ACKs because no new
DATA packets are received with a different previousPacket number.
Fix this by altering the discard check to only discard an ACK based on
previousPacket if there was no advance in the firstPacket. This allows us
to transmit a new packet which will cause previousPacket to advance in the
next ACK.
The check, however, needs to allow for the possibility that previousPacket
may actually have had the serial number placed in it instead - in which
case it will go outside the window and we should ignore it.
Fixes: 1a2391c30c0b ("rxrpc: Fix detection of out of order acks")
Reported-by: Dave Botsch <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/rxrpc/input.c | 30 ++++++++++++++++++++++++++----
1 file changed, 26 insertions(+), 4 deletions(-)
diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c
index 2f22f082a66c..3be4177baf70 100644
--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -802,6 +802,30 @@ static void rxrpc_input_soft_acks(struct rxrpc_call *call, u8 *acks,
}
}
+/*
+ * Return true if the ACK is valid - ie. it doesn't appear to have regressed
+ * with respect to the ack state conveyed by preceding ACKs.
+ */
+static bool rxrpc_is_ack_valid(struct rxrpc_call *call,
+ rxrpc_seq_t first_pkt, rxrpc_seq_t prev_pkt)
+{
+ rxrpc_seq_t base = READ_ONCE(call->ackr_first_seq);
+
+ if (after(first_pkt, base))
+ return true; /* The window advanced */
+
+ if (before(first_pkt, base))
+ return false; /* firstPacket regressed */
+
+ if (after_eq(prev_pkt, call->ackr_prev_seq))
+ return true; /* previousPacket hasn't regressed. */
+
+ /* Some rx implementations put a serial number in previousPacket. */
+ if (after_eq(prev_pkt, base + call->tx_winsize))
+ return false;
+ return true;
+}
+
/*
* Process an ACK packet.
*
@@ -865,8 +889,7 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb)
}
/* Discard any out-of-order or duplicate ACKs (outside lock). */
- if (before(first_soft_ack, call->ackr_first_seq) ||
- before(prev_pkt, call->ackr_prev_seq)) {
+ if (!rxrpc_is_ack_valid(call, first_soft_ack, prev_pkt)) {
trace_rxrpc_rx_discard_ack(call->debug_id, sp->hdr.serial,
first_soft_ack, call->ackr_first_seq,
prev_pkt, call->ackr_prev_seq);
@@ -882,8 +905,7 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb)
spin_lock(&call->input_lock);
/* Discard any out-of-order or duplicate ACKs (inside lock). */
- if (before(first_soft_ack, call->ackr_first_seq) ||
- before(prev_pkt, call->ackr_prev_seq)) {
+ if (!rxrpc_is_ack_valid(call, first_soft_ack, prev_pkt)) {
trace_rxrpc_rx_discard_ack(call->debug_id, sp->hdr.serial,
first_soft_ack, call->ackr_first_seq,
prev_pkt, call->ackr_prev_seq);
--
2.25.1
From: Chris Wilson <[email protected]>
commit bc850943486887e3859597a266767f95db90aa72 upstream.
We need to preserve fatal errors from fences that are being terminated
as we hook them up.
Fixes: ef4688497512 ("drm/i915: Propagate fence errors")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Matthew Auld <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 24fe5f2ab2478053d50a3bc629ada895903a5cbc)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/i915_request.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/i915_request.c
+++ b/drivers/gpu/drm/i915/i915_request.c
@@ -894,8 +894,10 @@ i915_request_await_request(struct i915_r
GEM_BUG_ON(to == from);
GEM_BUG_ON(to->timeline == from->timeline);
- if (i915_request_completed(from))
+ if (i915_request_completed(from)) {
+ i915_sw_fence_set_error_once(&to->submit, from->fence.error);
return 0;
+ }
if (to->engine->schedule) {
ret = i915_sched_node_add_dependency(&to->sched, &from->sched);
From: Michał Mirosław <[email protected]>
[ Upstream commit caf3c0437aaf2e63624c4aaf94c0dd38d1f897e3 ]
Make hda_nid_t tables static const, as they are not intended to be
modified by callees.
Signed-off-by: Michał Mirosław <[email protected]>
Link: https://lore.kernel.org/r/5150c94101c9534f4c8e987324f6912c16d459f6.1578043216.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_generic.c | 4 +--
sound/pci/hda/patch_analog.c | 6 ++--
sound/pci/hda/patch_ca0132.c | 12 +++----
sound/pci/hda/patch_conexant.c | 6 ++--
sound/pci/hda/patch_realtek.c | 62 +++++++++++++++++-----------------
sound/pci/hda/patch_sigmatel.c | 4 +--
sound/pci/hda/patch_via.c | 4 +--
7 files changed, 49 insertions(+), 49 deletions(-)
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 10d502328b76..fc001c64ef20 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -4401,7 +4401,7 @@ EXPORT_SYMBOL_GPL(snd_hda_gen_fix_pin_power);
*/
/* check each pin in the given array; returns true if any of them is plugged */
-static bool detect_jacks(struct hda_codec *codec, int num_pins, hda_nid_t *pins)
+static bool detect_jacks(struct hda_codec *codec, int num_pins, const hda_nid_t *pins)
{
int i;
bool present = false;
@@ -4420,7 +4420,7 @@ static bool detect_jacks(struct hda_codec *codec, int num_pins, hda_nid_t *pins)
}
/* standard HP/line-out auto-mute helper */
-static void do_automute(struct hda_codec *codec, int num_pins, hda_nid_t *pins,
+static void do_automute(struct hda_codec *codec, int num_pins, const hda_nid_t *pins,
int *paths, bool mute)
{
struct hda_gen_spec *spec = codec->spec;
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index bc9dd8e6fd86..c64895f99299 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -389,7 +389,7 @@ static int patch_ad1986a(struct hda_codec *codec)
{
int err;
struct ad198x_spec *spec;
- static hda_nid_t preferred_pairs[] = {
+ static const hda_nid_t preferred_pairs[] = {
0x1a, 0x03,
0x1b, 0x03,
0x1c, 0x04,
@@ -519,9 +519,9 @@ static int ad1983_add_spdif_mux_ctl(struct hda_codec *codec)
static int patch_ad1983(struct hda_codec *codec)
{
+ static const hda_nid_t conn_0c[] = { 0x08 };
+ static const hda_nid_t conn_0d[] = { 0x09 };
struct ad198x_spec *spec;
- static hda_nid_t conn_0c[] = { 0x08 };
- static hda_nid_t conn_0d[] = { 0x09 };
int err;
err = alloc_ad_spec(codec);
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index adad3651889e..1e904dd15ab3 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -7803,23 +7803,23 @@ static void sbz_region2_exit(struct hda_codec *codec)
static void sbz_set_pin_ctl_default(struct hda_codec *codec)
{
- hda_nid_t pins[5] = {0x0B, 0x0C, 0x0E, 0x12, 0x13};
+ static const hda_nid_t pins[] = {0x0B, 0x0C, 0x0E, 0x12, 0x13};
unsigned int i;
snd_hda_codec_write(codec, 0x11, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40);
- for (i = 0; i < 5; i++)
+ for (i = 0; i < ARRAY_SIZE(pins); i++)
snd_hda_codec_write(codec, pins[i], 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00);
}
static void ca0132_clear_unsolicited(struct hda_codec *codec)
{
- hda_nid_t pins[7] = {0x0B, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13};
+ static const hda_nid_t pins[] = {0x0B, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13};
unsigned int i;
- for (i = 0; i < 7; i++) {
+ for (i = 0; i < ARRAY_SIZE(pins); i++) {
snd_hda_codec_write(codec, pins[i], 0,
AC_VERB_SET_UNSOLICITED_ENABLE, 0x00);
}
@@ -7843,10 +7843,10 @@ static void sbz_gpio_shutdown_commands(struct hda_codec *codec, int dir,
static void zxr_dbpro_power_state_shutdown(struct hda_codec *codec)
{
- hda_nid_t pins[7] = {0x05, 0x0c, 0x09, 0x0e, 0x08, 0x11, 0x01};
+ static const hda_nid_t pins[] = {0x05, 0x0c, 0x09, 0x0e, 0x08, 0x11, 0x01};
unsigned int i;
- for (i = 0; i < 7; i++)
+ for (i = 0; i < ARRAY_SIZE(pins); i++)
snd_hda_codec_write(codec, pins[i], 0,
AC_VERB_SET_POWER_STATE, 0x03);
}
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 1e20e85e9b46..396b5503038a 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -116,7 +116,7 @@ static void cx_auto_parse_eapd(struct hda_codec *codec)
}
static void cx_auto_turn_eapd(struct hda_codec *codec, int num_pins,
- hda_nid_t *pins, bool on)
+ const hda_nid_t *pins, bool on)
{
int i;
for (i = 0; i < num_pins; i++) {
@@ -960,10 +960,10 @@ static const struct hda_model_fixup cxt5066_fixup_models[] = {
static void add_cx5051_fake_mutes(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
- static hda_nid_t out_nids[] = {
+ static const hda_nid_t out_nids[] = {
0x10, 0x11, 0
};
- hda_nid_t *p;
+ const hda_nid_t *p;
for (p = out_nids; *p; p++)
snd_hda_override_amp_caps(codec, *p, HDA_OUTPUT,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 004d2f638cf2..151099b8c394 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -465,10 +465,10 @@ static void set_eapd(struct hda_codec *codec, hda_nid_t nid, int on)
static void alc_auto_setup_eapd(struct hda_codec *codec, bool on)
{
/* We currently only handle front, HP */
- static hda_nid_t pins[] = {
+ static const hda_nid_t pins[] = {
0x0f, 0x10, 0x14, 0x15, 0x17, 0
};
- hda_nid_t *p;
+ const hda_nid_t *p;
for (p = pins; *p; p++)
set_eapd(codec, *p, on);
}
@@ -1939,19 +1939,19 @@ static void alc889_fixup_dac_route(struct hda_codec *codec,
{
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
/* fake the connections during parsing the tree */
- hda_nid_t conn1[2] = { 0x0c, 0x0d };
- hda_nid_t conn2[2] = { 0x0e, 0x0f };
- snd_hda_override_conn_list(codec, 0x14, 2, conn1);
- snd_hda_override_conn_list(codec, 0x15, 2, conn1);
- snd_hda_override_conn_list(codec, 0x18, 2, conn2);
- snd_hda_override_conn_list(codec, 0x1a, 2, conn2);
+ static const hda_nid_t conn1[] = { 0x0c, 0x0d };
+ static const hda_nid_t conn2[] = { 0x0e, 0x0f };
+ snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn1), conn1);
+ snd_hda_override_conn_list(codec, 0x15, ARRAY_SIZE(conn1), conn1);
+ snd_hda_override_conn_list(codec, 0x18, ARRAY_SIZE(conn2), conn2);
+ snd_hda_override_conn_list(codec, 0x1a, ARRAY_SIZE(conn2), conn2);
} else if (action == HDA_FIXUP_ACT_PROBE) {
/* restore the connections */
- hda_nid_t conn[5] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 };
- snd_hda_override_conn_list(codec, 0x14, 5, conn);
- snd_hda_override_conn_list(codec, 0x15, 5, conn);
- snd_hda_override_conn_list(codec, 0x18, 5, conn);
- snd_hda_override_conn_list(codec, 0x1a, 5, conn);
+ static const hda_nid_t conn[] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 };
+ snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn), conn);
+ snd_hda_override_conn_list(codec, 0x15, ARRAY_SIZE(conn), conn);
+ snd_hda_override_conn_list(codec, 0x18, ARRAY_SIZE(conn), conn);
+ snd_hda_override_conn_list(codec, 0x1a, ARRAY_SIZE(conn), conn);
}
}
@@ -1959,8 +1959,8 @@ static void alc889_fixup_dac_route(struct hda_codec *codec,
static void alc889_fixup_mbp_vref(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
+ static const hda_nid_t nids[] = { 0x14, 0x15, 0x19 };
struct alc_spec *spec = codec->spec;
- static hda_nid_t nids[3] = { 0x14, 0x15, 0x19 };
int i;
if (action != HDA_FIXUP_ACT_INIT)
@@ -1996,7 +1996,7 @@ static void alc889_fixup_mac_pins(struct hda_codec *codec,
static void alc889_fixup_imac91_vref(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
- static hda_nid_t nids[2] = { 0x18, 0x1a };
+ static const hda_nid_t nids[] = { 0x18, 0x1a };
if (action == HDA_FIXUP_ACT_INIT)
alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids));
@@ -2006,7 +2006,7 @@ static void alc889_fixup_imac91_vref(struct hda_codec *codec,
static void alc889_fixup_mba11_vref(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
- static hda_nid_t nids[1] = { 0x18 };
+ static const hda_nid_t nids[] = { 0x18 };
if (action == HDA_FIXUP_ACT_INIT)
alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids));
@@ -2016,7 +2016,7 @@ static void alc889_fixup_mba11_vref(struct hda_codec *codec,
static void alc889_fixup_mba21_vref(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
- static hda_nid_t nids[2] = { 0x18, 0x19 };
+ static const hda_nid_t nids[] = { 0x18, 0x19 };
if (action == HDA_FIXUP_ACT_INIT)
alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids));
@@ -2098,7 +2098,7 @@ static void alc1220_fixup_clevo_p950(struct hda_codec *codec,
const struct hda_fixup *fix,
int action)
{
- hda_nid_t conn1[1] = { 0x0c };
+ static const hda_nid_t conn1[] = { 0x0c };
if (action != HDA_FIXUP_ACT_PRE_PROBE)
return;
@@ -2107,8 +2107,8 @@ static void alc1220_fixup_clevo_p950(struct hda_codec *codec,
/* We therefore want to make sure 0x14 (front headphone) and
* 0x1b (speakers) use the stereo DAC 0x02
*/
- snd_hda_override_conn_list(codec, 0x14, 1, conn1);
- snd_hda_override_conn_list(codec, 0x1b, 1, conn1);
+ snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn1), conn1);
+ snd_hda_override_conn_list(codec, 0x1b, ARRAY_SIZE(conn1), conn1);
}
static void alc_fixup_headset_mode_no_hp_mic(struct hda_codec *codec,
@@ -5371,7 +5371,7 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec,
* the speaker output becomes too low by some reason on Thinkpads with
* ALC298 codec
*/
- static hda_nid_t preferred_pairs[] = {
+ static const hda_nid_t preferred_pairs[] = {
0x14, 0x03, 0x17, 0x02, 0x21, 0x02,
0
};
@@ -5632,9 +5632,9 @@ static void alc290_fixup_mono_speakers(struct hda_codec *codec,
/* DAC node 0x03 is giving mono output. We therefore want to
make sure 0x14 (front speaker) and 0x15 (headphones) use the
stereo DAC, while leaving 0x17 (bass speaker) for node 0x03. */
- hda_nid_t conn1[2] = { 0x0c };
- snd_hda_override_conn_list(codec, 0x14, 1, conn1);
- snd_hda_override_conn_list(codec, 0x15, 1, conn1);
+ static const hda_nid_t conn1[] = { 0x0c };
+ snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn1), conn1);
+ snd_hda_override_conn_list(codec, 0x15, ARRAY_SIZE(conn1), conn1);
}
}
@@ -5649,8 +5649,8 @@ static void alc298_fixup_speaker_volume(struct hda_codec *codec,
Pin Complex), since Node 0x02 has Amp-out caps, we can adjust
speaker's volume now. */
- hda_nid_t conn1[1] = { 0x0c };
- snd_hda_override_conn_list(codec, 0x17, 1, conn1);
+ static const hda_nid_t conn1[] = { 0x0c };
+ snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn1), conn1);
}
}
@@ -5659,8 +5659,8 @@ static void alc295_fixup_disable_dac3(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
- hda_nid_t conn[2] = { 0x02, 0x03 };
- snd_hda_override_conn_list(codec, 0x17, 2, conn);
+ static const hda_nid_t conn[] = { 0x02, 0x03 };
+ snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn), conn);
}
}
@@ -5669,8 +5669,8 @@ static void alc285_fixup_speaker2_to_dac1(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
- hda_nid_t conn[1] = { 0x02 };
- snd_hda_override_conn_list(codec, 0x17, 1, conn);
+ static const hda_nid_t conn[] = { 0x02 };
+ snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn), conn);
}
}
@@ -5757,7 +5757,7 @@ static void alc274_fixup_bind_dacs(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
struct alc_spec *spec = codec->spec;
- static hda_nid_t preferred_pairs[] = {
+ static const hda_nid_t preferred_pairs[] = {
0x21, 0x03, 0x1b, 0x03, 0x16, 0x02,
0
};
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 894f3f509e76..4b9300babc7d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -795,7 +795,7 @@ static int find_mute_led_cfg(struct hda_codec *codec, int default_polarity)
static bool has_builtin_speaker(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- hda_nid_t *nid_pin;
+ const hda_nid_t *nid_pin;
int nids, i;
if (spec->gen.autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT) {
@@ -2182,7 +2182,7 @@ static void hp_envy_ts_fixup_dac_bind(struct hda_codec *codec,
int action)
{
struct sigmatel_spec *spec = codec->spec;
- static hda_nid_t preferred_pairs[] = {
+ static const hda_nid_t preferred_pairs[] = {
0xd, 0x13,
0
};
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 29dcdb8b36db..b40d01e01832 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1038,8 +1038,8 @@ static const struct snd_pci_quirk vt2002p_fixups[] = {
*/
static void fix_vt1802_connections(struct hda_codec *codec)
{
- static hda_nid_t conn_24[] = { 0x14, 0x1c };
- static hda_nid_t conn_33[] = { 0x1c };
+ static const hda_nid_t conn_24[] = { 0x14, 0x1c };
+ static const hda_nid_t conn_33[] = { 0x1c };
snd_hda_override_conn_list(codec, 0x24, ARRAY_SIZE(conn_24), conn_24);
snd_hda_override_conn_list(codec, 0x33, ARRAY_SIZE(conn_33), conn_33);
--
2.25.1
From: Mike Pozulp <[email protected]>
[ Upstream commit 14425f1f521fdfe274a7bb390637c786432e08b4 ]
Some models of the Samsung Notebook 9 have very quiet and distorted
headphone output. This quirk changes the VREF value of the ALC298
codec NID 0x1a from default HIZ to new 100.
[ adjusted to 5.7-base and rearranged in SSID order -- tiwai ]
Signed-off-by: Mike Pozulp <[email protected]>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index dab0c5b6bb61..736ddab16512 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6095,6 +6095,7 @@ enum {
ALC285_FIXUP_HP_GPIO_LED,
ALC285_FIXUP_HP_MUTE_LED,
ALC236_FIXUP_HP_MUTE_LED,
+ ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -7251,6 +7252,13 @@ static const struct hda_fixup alc269_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc236_fixup_hp_mute_led,
},
+ [ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc5 },
+ { }
+ },
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -7446,6 +7454,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE),
SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_HEADSET_MODE),
SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC),
+ SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+ SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC),
--
2.25.1
From: Phil Auld <[email protected]>
[ Upstream commit b34cb07dde7c2346dec73d053ce926aeaa087303 ]
sched/fair: Fix enqueue_task_fair warning some more
The recent patch, fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
did not fully resolve the issues with the rq->tmp_alone_branch !=
&rq->leaf_cfs_rq_list warning in enqueue_task_fair. There is a case where
the first for_each_sched_entity loop exits due to on_rq, having incompletely
updated the list. In this case the second for_each_sched_entity loop can
further modify se. The later code to fix up the list management fails to do
what is needed because se does not point to the sched_entity which broke out
of the first loop. The list is not fixed up because the throttled parent was
already added back to the list by a task enqueue in a parallel child hierarchy.
Address this by calling list_add_leaf_cfs_rq if there are throttled parents
while doing the second for_each_sched_entity loop.
Fixes: fe61468b2cb ("sched/fair: Fix enqueue_task_fair warning")
Suggested-by: Vincent Guittot <[email protected]>
Signed-off-by: Phil Auld <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 42cc3de24dcc..193b6ab74d7f 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5254,6 +5254,13 @@ enqueue_task_fair(struct rq *rq, struct task_struct *p, int flags)
/* end evaluation on encountering a throttled cfs_rq */
if (cfs_rq_throttled(cfs_rq))
goto enqueue_throttle;
+
+ /*
+ * One parent has been throttled and cfs_rq removed from the
+ * list. Add it back to not break the leaf list.
+ */
+ if (throttled_hierarchy(cfs_rq))
+ list_add_leaf_cfs_rq(cfs_rq);
}
enqueue_throttle:
--
2.25.1
From: Michael Ellerman <[email protected]>
[ Upstream commit 8659a0e0efdd975c73355dbc033f79ba3b31e82c ]
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: [email protected] # v4.13+
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 198bbf42e398..3dc5aecdd853 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -133,7 +133,7 @@ config PPC
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_MEMBARRIER_CALLBACKS
select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
- select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION)
+ select ARCH_HAS_STRICT_KERNEL_RWX if (PPC32 && !HIBERNATION)
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UACCESS_FLUSHCACHE
select ARCH_HAS_UACCESS_MCSAFE if PPC64
--
2.25.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 1a462be52f4505a2719631fb5aa7bfdbd37bfd8d ]
In the commit 8e85def5723e ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/sound/hda_regmap.h | 3 +
include/sound/hdaudio.h | 1 +
sound/hda/hdac_device.c | 1 +
sound/hda/hdac_regmap.c | 142 +++++++++++++++++++++++++---------
sound/pci/hda/hda_codec.c | 30 +++----
sound/pci/hda/hda_generic.c | 2 +-
sound/pci/hda/hda_local.h | 2 +
sound/pci/hda/patch_hdmi.c | 2 +-
sound/pci/hda/patch_realtek.c | 4 +-
sound/pci/hda/patch_via.c | 2 +-
10 files changed, 135 insertions(+), 54 deletions(-)
diff --git a/include/sound/hda_regmap.h b/include/sound/hda_regmap.h
index 5141f8ffbb12..4c1b9bebbd60 100644
--- a/include/sound/hda_regmap.h
+++ b/include/sound/hda_regmap.h
@@ -24,6 +24,9 @@ int snd_hdac_regmap_write_raw(struct hdac_device *codec, unsigned int reg,
unsigned int val);
int snd_hdac_regmap_update_raw(struct hdac_device *codec, unsigned int reg,
unsigned int mask, unsigned int val);
+int snd_hdac_regmap_update_raw_once(struct hdac_device *codec, unsigned int reg,
+ unsigned int mask, unsigned int val);
+void snd_hdac_regmap_sync(struct hdac_device *codec);
/**
* snd_hdac_regmap_encode_verb - encode the verb to a pseudo register
diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h
index fb9dce4c6928..44e57bcc4a57 100644
--- a/include/sound/hdaudio.h
+++ b/include/sound/hdaudio.h
@@ -87,6 +87,7 @@ struct hdac_device {
/* regmap */
struct regmap *regmap;
+ struct mutex regmap_lock;
struct snd_array vendor_verbs;
bool lazy_cache:1; /* don't wake up for writes */
bool caps_overwriting:1; /* caps overwrite being in process */
diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index 9f3e37511408..c946fd8beebc 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -57,6 +57,7 @@ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus,
codec->addr = addr;
codec->type = HDA_DEV_CORE;
mutex_init(&codec->widget_lock);
+ mutex_init(&codec->regmap_lock);
pm_runtime_set_active(&codec->dev);
pm_runtime_get_noresume(&codec->dev);
atomic_set(&codec->in_pm, 0);
diff --git a/sound/hda/hdac_regmap.c b/sound/hda/hdac_regmap.c
index 286361ecd640..2596a881186f 100644
--- a/sound/hda/hdac_regmap.c
+++ b/sound/hda/hdac_regmap.c
@@ -363,6 +363,7 @@ static const struct regmap_config hda_regmap_cfg = {
.reg_write = hda_reg_write,
.use_single_read = true,
.use_single_write = true,
+ .disable_locking = true,
};
/**
@@ -425,12 +426,29 @@ EXPORT_SYMBOL_GPL(snd_hdac_regmap_add_vendor_verb);
static int reg_raw_write(struct hdac_device *codec, unsigned int reg,
unsigned int val)
{
+ int err;
+
+ mutex_lock(&codec->regmap_lock);
if (!codec->regmap)
- return hda_reg_write(codec, reg, val);
+ err = hda_reg_write(codec, reg, val);
else
- return regmap_write(codec->regmap, reg, val);
+ err = regmap_write(codec->regmap, reg, val);
+ mutex_unlock(&codec->regmap_lock);
+ return err;
}
+/* a helper macro to call @func_call; retry with power-up if failed */
+#define CALL_RAW_FUNC(codec, func_call) \
+ ({ \
+ int _err = func_call; \
+ if (_err == -EAGAIN) { \
+ _err = snd_hdac_power_up_pm(codec); \
+ if (_err >= 0) \
+ _err = func_call; \
+ snd_hdac_power_down_pm(codec); \
+ } \
+ _err;})
+
/**
* snd_hdac_regmap_write_raw - write a pseudo register with power mgmt
* @codec: the codec object
@@ -442,42 +460,29 @@ static int reg_raw_write(struct hdac_device *codec, unsigned int reg,
int snd_hdac_regmap_write_raw(struct hdac_device *codec, unsigned int reg,
unsigned int val)
{
- int err;
-
- err = reg_raw_write(codec, reg, val);
- if (err == -EAGAIN) {
- err = snd_hdac_power_up_pm(codec);
- if (err >= 0)
- err = reg_raw_write(codec, reg, val);
- snd_hdac_power_down_pm(codec);
- }
- return err;
+ return CALL_RAW_FUNC(codec, reg_raw_write(codec, reg, val));
}
EXPORT_SYMBOL_GPL(snd_hdac_regmap_write_raw);
static int reg_raw_read(struct hdac_device *codec, unsigned int reg,
unsigned int *val, bool uncached)
{
+ int err;
+
+ mutex_lock(&codec->regmap_lock);
if (uncached || !codec->regmap)
- return hda_reg_read(codec, reg, val);
+ err = hda_reg_read(codec, reg, val);
else
- return regmap_read(codec->regmap, reg, val);
+ err = regmap_read(codec->regmap, reg, val);
+ mutex_unlock(&codec->regmap_lock);
+ return err;
}
static int __snd_hdac_regmap_read_raw(struct hdac_device *codec,
unsigned int reg, unsigned int *val,
bool uncached)
{
- int err;
-
- err = reg_raw_read(codec, reg, val, uncached);
- if (err == -EAGAIN) {
- err = snd_hdac_power_up_pm(codec);
- if (err >= 0)
- err = reg_raw_read(codec, reg, val, uncached);
- snd_hdac_power_down_pm(codec);
- }
- return err;
+ return CALL_RAW_FUNC(codec, reg_raw_read(codec, reg, val, uncached));
}
/**
@@ -504,6 +509,35 @@ int snd_hdac_regmap_read_raw_uncached(struct hdac_device *codec,
return __snd_hdac_regmap_read_raw(codec, reg, val, true);
}
+static int reg_raw_update(struct hdac_device *codec, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ unsigned int orig;
+ bool change;
+ int err;
+
+ mutex_lock(&codec->regmap_lock);
+ if (codec->regmap) {
+ err = regmap_update_bits_check(codec->regmap, reg, mask, val,
+ &change);
+ if (!err)
+ err = change ? 1 : 0;
+ } else {
+ err = hda_reg_read(codec, reg, &orig);
+ if (!err) {
+ val &= mask;
+ val |= orig & ~mask;
+ if (val != orig) {
+ err = hda_reg_write(codec, reg, val);
+ if (!err)
+ err = 1;
+ }
+ }
+ }
+ mutex_unlock(&codec->regmap_lock);
+ return err;
+}
+
/**
* snd_hdac_regmap_update_raw - update a pseudo register with power mgmt
* @codec: the codec object
@@ -515,20 +549,58 @@ int snd_hdac_regmap_read_raw_uncached(struct hdac_device *codec,
*/
int snd_hdac_regmap_update_raw(struct hdac_device *codec, unsigned int reg,
unsigned int mask, unsigned int val)
+{
+ return CALL_RAW_FUNC(codec, reg_raw_update(codec, reg, mask, val));
+}
+EXPORT_SYMBOL_GPL(snd_hdac_regmap_update_raw);
+
+static int reg_raw_update_once(struct hdac_device *codec, unsigned int reg,
+ unsigned int mask, unsigned int val)
{
unsigned int orig;
int err;
- val &= mask;
- err = snd_hdac_regmap_read_raw(codec, reg, &orig);
- if (err < 0)
- return err;
- val |= orig & ~mask;
- if (val == orig)
- return 0;
- err = snd_hdac_regmap_write_raw(codec, reg, val);
+ if (!codec->regmap)
+ return reg_raw_update(codec, reg, mask, val);
+
+ mutex_lock(&codec->regmap_lock);
+ regcache_cache_only(codec->regmap, true);
+ err = regmap_read(codec->regmap, reg, &orig);
+ regcache_cache_only(codec->regmap, false);
if (err < 0)
- return err;
- return 1;
+ err = regmap_update_bits(codec->regmap, reg, mask, val);
+ mutex_unlock(&codec->regmap_lock);
+ return err;
}
-EXPORT_SYMBOL_GPL(snd_hdac_regmap_update_raw);
+
+/**
+ * snd_hdac_regmap_update_raw_once - initialize the register value only once
+ * @codec: the codec object
+ * @reg: pseudo register
+ * @mask: bit mask to update
+ * @val: value to update
+ *
+ * Performs the update of the register bits only once when the register
+ * hasn't been initialized yet. Used in HD-audio legacy driver.
+ * Returns zero if successful or a negative error code
+ */
+int snd_hdac_regmap_update_raw_once(struct hdac_device *codec, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ return CALL_RAW_FUNC(codec, reg_raw_update_once(codec, reg, mask, val));
+}
+EXPORT_SYMBOL_GPL(snd_hdac_regmap_update_raw_once);
+
+/**
+ * snd_hdac_regmap_sync - sync out the cached values for PM resume
+ * @codec: the codec object
+ */
+void snd_hdac_regmap_sync(struct hdac_device *codec)
+{
+ if (codec->regmap) {
+ mutex_lock(&codec->regmap_lock);
+ regcache_sync(codec->regmap);
+ mutex_unlock(&codec->regmap_lock);
+ }
+}
+EXPORT_SYMBOL_GPL(snd_hdac_regmap_sync);
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 6cb72336433a..07c03c32715a 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1267,6 +1267,18 @@ int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
}
EXPORT_SYMBOL_GPL(snd_hda_override_amp_caps);
+static unsigned int encode_amp(struct hda_codec *codec, hda_nid_t nid,
+ int ch, int dir, int idx)
+{
+ unsigned int cmd = snd_hdac_regmap_encode_amp(nid, ch, dir, idx);
+
+ /* enable fake mute if no h/w mute but min=mute */
+ if ((query_amp_caps(codec, nid, dir) &
+ (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE)) == AC_AMPCAP_MIN_MUTE)
+ cmd |= AC_AMP_FAKE_MUTE;
+ return cmd;
+}
+
/**
* snd_hda_codec_amp_update - update the AMP mono value
* @codec: HD-audio codec
@@ -1282,12 +1294,8 @@ EXPORT_SYMBOL_GPL(snd_hda_override_amp_caps);
int snd_hda_codec_amp_update(struct hda_codec *codec, hda_nid_t nid,
int ch, int dir, int idx, int mask, int val)
{
- unsigned int cmd = snd_hdac_regmap_encode_amp(nid, ch, dir, idx);
+ unsigned int cmd = encode_amp(codec, nid, ch, dir, idx);
- /* enable fake mute if no h/w mute but min=mute */
- if ((query_amp_caps(codec, nid, dir) &
- (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE)) == AC_AMPCAP_MIN_MUTE)
- cmd |= AC_AMP_FAKE_MUTE;
return snd_hdac_regmap_update_raw(&codec->core, cmd, mask, val);
}
EXPORT_SYMBOL_GPL(snd_hda_codec_amp_update);
@@ -1335,16 +1343,11 @@ EXPORT_SYMBOL_GPL(snd_hda_codec_amp_stereo);
int snd_hda_codec_amp_init(struct hda_codec *codec, hda_nid_t nid, int ch,
int dir, int idx, int mask, int val)
{
- int orig;
+ unsigned int cmd = encode_amp(codec, nid, ch, dir, idx);
if (!codec->core.regmap)
return -EINVAL;
- regcache_cache_only(codec->core.regmap, true);
- orig = snd_hda_codec_amp_read(codec, nid, ch, dir, idx);
- regcache_cache_only(codec->core.regmap, false);
- if (orig >= 0)
- return 0;
- return snd_hda_codec_amp_update(codec, nid, ch, dir, idx, mask, val);
+ return snd_hdac_regmap_update_raw_once(&codec->core, cmd, mask, val);
}
EXPORT_SYMBOL_GPL(snd_hda_codec_amp_init);
@@ -2905,8 +2908,7 @@ static void hda_call_codec_resume(struct hda_codec *codec)
else {
if (codec->patch_ops.init)
codec->patch_ops.init(codec);
- if (codec->core.regmap)
- regcache_sync(codec->core.regmap);
+ snd_hda_regmap_sync(codec);
}
if (codec->jackpoll_interval)
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index fc001c64ef20..6815f9dc8545 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -6027,7 +6027,7 @@ int snd_hda_gen_init(struct hda_codec *codec)
/* call init functions of standard auto-mute helpers */
update_automute_all(codec);
- regcache_sync(codec->core.regmap);
+ snd_hda_regmap_sync(codec);
if (spec->vmaster_mute.sw_kctl && spec->vmaster_mute.hook)
snd_hda_sync_vmaster_hook(&spec->vmaster_mute);
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 3942e1b528d8..3dca65d79b02 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -138,6 +138,8 @@ int snd_hda_codec_reset(struct hda_codec *codec);
void snd_hda_codec_register(struct hda_codec *codec);
void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec);
+#define snd_hda_regmap_sync(codec) snd_hdac_regmap_sync(&(codec)->core)
+
enum {
HDA_VMUTE_OFF,
HDA_VMUTE_ON,
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index d48263d1f6a2..d41c91468ab3 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2359,7 +2359,7 @@ static int generic_hdmi_resume(struct hda_codec *codec)
int pin_idx;
codec->patch_ops.init(codec);
- regcache_sync(codec->core.regmap);
+ snd_hda_regmap_sync(codec);
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index a0e7d711cbb5..499c8150ebb8 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -908,7 +908,7 @@ static int alc_resume(struct hda_codec *codec)
if (!spec->no_depop_delay)
msleep(150); /* to avoid pop noise */
codec->patch_ops.init(codec);
- regcache_sync(codec->core.regmap);
+ snd_hda_regmap_sync(codec);
hda_call_check_power_status(codec, 0x01);
return 0;
}
@@ -3756,7 +3756,7 @@ static int alc269_resume(struct hda_codec *codec)
msleep(200);
}
- regcache_sync(codec->core.regmap);
+ snd_hda_regmap_sync(codec);
hda_call_check_power_status(codec, 0x01);
/* on some machine, the BIOS will clear the codec gpio data when enter
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index b40d01e01832..7ef8f3105cdb 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -396,7 +396,7 @@ static int via_resume(struct hda_codec *codec)
/* some delay here to make jack detection working (bko#98921) */
msleep(10);
codec->patch_ops.init(codec);
- regcache_sync(codec->core.regmap);
+ snd_hda_regmap_sync(codec);
return 0;
}
#endif
--
2.25.1
From: Vladimir Murzin <[email protected]>
commit 6b41030fdc79086db5d673c5ed7169f3ee8c13b9 upstream.
In case of dmatest is built-in and no channel was configured test
doesn't run with:
dmatest: Could not start test, no channels configured
Even though description to "channel" parameter claims that default is
any.
Add default channel back as it used to be rather than reject test with
no channel configuration.
Fixes: d53513d5dc285d9a95a534fc41c5c08af6b60eac ("dmaengine: dmatest: Add support for multi channel testing)
Reported-by: Dijil Mohan <[email protected]>
Signed-off-by: Vladimir Murzin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/dmatest.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -1166,10 +1166,11 @@ static int dmatest_run_set(const char *v
mutex_unlock(&info->lock);
return ret;
} else if (dmatest_run) {
- if (is_threaded_test_pending(info))
- start_threaded_tests(info);
- else
- pr_info("Could not start test, no channels configured\n");
+ if (!is_threaded_test_pending(info)) {
+ pr_info("No channels configured, continue with any\n");
+ add_threaded_test(info);
+ }
+ start_threaded_tests(info);
} else {
stop_threaded_test(info);
}
From: Tyrel Datwyler <[email protected]>
[ Upstream commit b36522150e5b85045f868768d46fbaaa034174b2 ]
While removing an ibmvscsi client adapter a WARN_ON like the following is
seen in the kernel log:
drmgr: drmgr: -r -c slot -s U9080.M9S.783AEC8-V11-C11 -w 5 -d 1
WARNING: CPU: 9 PID: 24062 at ../kernel/dma/mapping.c:311 dma_free_attrs+0x78/0x110
Supported: No, Unreleased kernel
CPU: 9 PID: 24062 Comm: drmgr Kdump: loaded Tainted: G X 5.3.18-12-default
NIP: c0000000001fa758 LR: c0000000001fa744 CTR: c0000000001fa6e0
REGS: c0000002173375d0 TRAP: 0700 Tainted: G X (5.3.18-12-default)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088282 XER: 20000000
CFAR: c0000000001fbf0c IRQMASK: 1
GPR00: c0000000001fa744 c000000217337860 c00000000161ab00 0000000000000000
GPR04: 0000000000000000 c000011e12250000 0000000018010000 0000000000000000
GPR08: 0000000000000000 0000000000000001 0000000000000001 c0080000190f4fa8
GPR12: c0000000001fa6e0 c000000007fc2a00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 000000011420e310 0000000000000000 0000000000000000 0000000018010000
GPR28: c00000000159de50 c000011e12250000 0000000000006600 c000011e5c994848
NIP [c0000000001fa758] dma_free_attrs+0x78/0x110
LR [c0000000001fa744] dma_free_attrs+0x64/0x110
Call Trace:
[c000000217337860] [000000011420e310] 0x11420e310 (unreliable)
[c0000002173378b0] [c0080000190f0280] release_event_pool+0xd8/0x120 [ibmvscsi]
[c000000217337930] [c0080000190f3f74] ibmvscsi_remove+0x6c/0x160 [ibmvscsi]
[c000000217337960] [c0000000000f3cac] vio_bus_remove+0x5c/0x100
[c0000002173379a0] [c00000000087a0a4] device_release_driver_internal+0x154/0x280
[c0000002173379e0] [c0000000008777cc] bus_remove_device+0x11c/0x220
[c000000217337a60] [c000000000870fc4] device_del+0x1c4/0x470
[c000000217337b10] [c0000000008712a0] device_unregister+0x30/0xa0
[c000000217337b80] [c0000000000f39ec] vio_unregister_device+0x2c/0x60
[c000000217337bb0] [c00800001a1d0964] dlpar_remove_slot+0x14c/0x250 [rpadlpar_io]
[c000000217337c50] [c00800001a1d0bcc] remove_slot_store+0xa4/0x110 [rpadlpar_io]
[c000000217337cd0] [c000000000c091a0] kobj_attr_store+0x30/0x50
[c000000217337cf0] [c00000000057c934] sysfs_kf_write+0x64/0x90
[c000000217337d10] [c00000000057be10] kernfs_fop_write+0x1b0/0x290
[c000000217337d60] [c000000000488c4c] __vfs_write+0x3c/0x70
[c000000217337d80] [c00000000048c648] vfs_write+0xd8/0x260
[c000000217337dd0] [c00000000048ca8c] ksys_write+0xdc/0x130
[c000000217337e20] [c00000000000b488] system_call+0x5c/0x70
Instruction dump:
7c840074 f8010010 f821ffb1 20840040 eb830218 7c8407b4 48002019 60000000
2fa30000 409e003c 892d0988 792907e0 <0b090000> 2fbd0000 419e0028 2fbc0000
---[ end trace 5955b3c0cc079942 ]---
rpadlpar_io: slot U9080.M9S.783AEC8-V11-C11 removed
This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by release_event_pool(). At this point in the code path
we have quiesced the adapter and it is overly paranoid to be holding the
host lock.
[mkp: fixed build warning reported by sfr]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ibmvscsi/ibmvscsi.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 7f66a7783209..59f0f1030c54 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -2320,16 +2320,12 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
static int ibmvscsi_remove(struct vio_dev *vdev)
{
struct ibmvscsi_host_data *hostdata = dev_get_drvdata(&vdev->dev);
- unsigned long flags;
srp_remove_host(hostdata->host);
scsi_remove_host(hostdata->host);
purge_requests(hostdata, DID_ERROR);
-
- spin_lock_irqsave(hostdata->host->host_lock, flags);
release_event_pool(&hostdata->pool, hostdata);
- spin_unlock_irqrestore(hostdata->host->host_lock, flags);
ibmvscsi_release_crq_queue(&hostdata->queue, hostdata,
max_events);
--
2.25.1
From: Xiyu Yang <[email protected]>
commit a0b845ffa0d91855532b50fc040aeb2d8338dca4 upstream.
aa_change_profile() invokes aa_get_current_label(), which returns
a reference of the current task's label.
According to the comment of aa_get_current_label(), the returned
reference must be put with aa_put_label().
However, when the original object pointed by "label" becomes
unreachable because aa_change_profile() returns or a new object
is assigned to "label", reference count increased by
aa_get_current_label() is not decreased, causing a refcnt leak.
Fix this by calling aa_put_label() before aa_change_profile() return
and dropping unnecessary aa_get_current_label().
Fixes: 9fcf78cca198 ("apparmor: update domain transitions that are subsets of confinement at nnp")
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: John Johansen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/apparmor/domain.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/security/apparmor/domain.c
+++ b/security/apparmor/domain.c
@@ -1334,6 +1334,7 @@ int aa_change_profile(const char *fqname
ctx->nnp = aa_get_label(label);
if (!fqname || !*fqname) {
+ aa_put_label(label);
AA_DEBUG("no profile name");
return -EINVAL;
}
@@ -1352,8 +1353,6 @@ int aa_change_profile(const char *fqname
op = OP_CHANGE_PROFILE;
}
- label = aa_get_current_label();
-
if (*fqname == '&') {
stack = true;
/* don't have label_parse() do stacking */
From: Scott Bahling <[email protected]>
commit b0cb099062b0c18246c3a20caaab4c0afc303255 upstream.
The ST Audio ADCIII is an STDSP24 card plus extension box. With commit
e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII") we
enabled the ADCIII ports using the model=staudio option but forgot
this part to ensure the STDSP24 card is initialized properly.
Fixes: e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII")
Signed-off-by: Scott Bahling <[email protected]>
Cc: <[email protected]>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1048934
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/ice1712/ice1712.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2360,7 +2360,8 @@ static int snd_ice1712_chip_init(struct
pci_write_config_byte(ice->pci, 0x61, ice->eeprom.data[ICE_EEP1_ACLINK]);
pci_write_config_byte(ice->pci, 0x62, ice->eeprom.data[ICE_EEP1_I2SID]);
pci_write_config_byte(ice->pci, 0x63, ice->eeprom.data[ICE_EEP1_SPDIF]);
- if (ice->eeprom.subvendor != ICE1712_SUBDEVICE_STDSP24) {
+ if (ice->eeprom.subvendor != ICE1712_SUBDEVICE_STDSP24 &&
+ ice->eeprom.subvendor != ICE1712_SUBDEVICE_STAUDIO_ADCIII) {
ice->gpio.write_mask = ice->eeprom.gpiomask;
ice->gpio.direction = ice->eeprom.gpiodir;
snd_ice1712_write(ice, ICE1712_IREG_GPIO_WRITE_MASK,
From: Daniel Playfair Cal <[email protected]>
[ Upstream commit 538f67407e2c0e5ed2a46e7d7ffa52f2e30c7ef8 ]
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious
interrupts after resuming from suspend until it receives some input or
is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it
is reset when resuming from suspend.
More information about the bug can be found in this mailing list
discussion: https://www.spinics.net/lists/linux-input/msg59530.html
Signed-off-by: Daniel Playfair Cal <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 3 +++
drivers/hid/i2c-hid/i2c-hid-core.c | 2 ++
2 files changed, 5 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 48eba9c4f39a..3341133df3a8 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1089,6 +1089,9 @@
#define USB_DEVICE_ID_SYMBOL_SCANNER_2 0x1300
#define USB_DEVICE_ID_SYMBOL_SCANNER_3 0x1200
+#define I2C_VENDOR_ID_SYNAPTICS 0x06cb
+#define I2C_PRODUCT_ID_SYNAPTICS_SYNA2393 0x7a13
+
#define USB_VENDOR_ID_SYNAPTICS 0x06cb
#define USB_DEVICE_ID_SYNAPTICS_TP 0x0001
#define USB_DEVICE_ID_SYNAPTICS_INT_TP 0x0002
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 479934f7d241..b525b2715e07 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -179,6 +179,8 @@ static const struct i2c_hid_quirks {
I2C_HID_QUIRK_BOGUS_IRQ },
{ USB_VENDOR_ID_ALPS_JP, HID_ANY_ID,
I2C_HID_QUIRK_RESET_ON_RESUME },
+ { I2C_VENDOR_ID_SYNAPTICS, I2C_PRODUCT_ID_SYNAPTICS_SYNA2393,
+ I2C_HID_QUIRK_RESET_ON_RESUME },
{ USB_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720,
I2C_HID_QUIRK_BAD_INPUT_SIZE },
{ 0, 0 }
--
2.25.1
From: Ewan D. Milne <[email protected]>
commit fb9024b0646939e59d8a0b6799b317070619795a upstream.
Calling ql_log() inside qla2x00_port_speed_show() is causing messages to be
output to the console for no particularly good reason. The sysfs read
routine should just return the information to userspace. The only reason
to log a message is when the port speed actually changes, and this already
occurs elsewhere.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4910b524ac9e ("scsi: qla2xxx: Add support for setting port speed")
Cc: <[email protected]> # v5.1+
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Laurence Oberman <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Ewan D. Milne <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_attr.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1775,9 +1775,6 @@ qla2x00_port_speed_show(struct device *d
return -EINVAL;
}
- ql_log(ql_log_info, vha, 0x70d6,
- "port speed:%d\n", ha->link_data_rate);
-
return scnprintf(buf, PAGE_SIZE, "%s\n", spd[ha->link_data_rate]);
}
From: Yoshiyuki Kurauchi <[email protected]>
[ Upstream commit 846c68f7f1ac82c797a2f1db3344a2966c0fe2e1 ]
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI
flag since it returns multipart message.
This patch adds a new arg "flags" in gtp_genl_fill_info() so that
flags can be set by the callers.
Signed-off-by: Yoshiyuki Kurauchi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/gtp.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 3a53d222bfcc..d89ec99abcd6 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -1172,11 +1172,11 @@ out_unlock:
static struct genl_family gtp_genl_family;
static int gtp_genl_fill_info(struct sk_buff *skb, u32 snd_portid, u32 snd_seq,
- u32 type, struct pdp_ctx *pctx)
+ int flags, u32 type, struct pdp_ctx *pctx)
{
void *genlh;
- genlh = genlmsg_put(skb, snd_portid, snd_seq, >p_genl_family, 0,
+ genlh = genlmsg_put(skb, snd_portid, snd_seq, >p_genl_family, flags,
type);
if (genlh == NULL)
goto nlmsg_failure;
@@ -1230,8 +1230,8 @@ static int gtp_genl_get_pdp(struct sk_buff *skb, struct genl_info *info)
goto err_unlock;
}
- err = gtp_genl_fill_info(skb2, NETLINK_CB(skb).portid,
- info->snd_seq, info->nlhdr->nlmsg_type, pctx);
+ err = gtp_genl_fill_info(skb2, NETLINK_CB(skb).portid, info->snd_seq,
+ 0, info->nlhdr->nlmsg_type, pctx);
if (err < 0)
goto err_unlock_free;
@@ -1274,6 +1274,7 @@ static int gtp_genl_dump_pdp(struct sk_buff *skb,
gtp_genl_fill_info(skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
+ NLM_F_MULTI,
cb->nlh->nlmsg_type, pctx)) {
cb->args[0] = i;
cb->args[1] = j;
--
2.25.1
From: Vincent Guittot <[email protected]>
[ Upstream commit 5ab297bab984310267734dfbcc8104566658ebef ]
Even when a cgroup is throttled, the group se of a child cgroup can still
be enqueued and its gse->on_rq stays true. When a task is enqueued on such
child, we still have to update the load_avg and increase
h_nr_running of the throttled cfs. Nevertheless, the 1st
for_each_sched_entity() loop is skipped because of gse->on_rq == true and the
2nd loop because the cfs is throttled whereas we have to update both
load_avg with the old h_nr_running and increase h_nr_running in such case.
The same sequence can happen during dequeue when se moves to parent before
breaking in the 1st loop.
Note that the update of load_avg will effectively happen only once in order
to sync up to the throttled time. Next call for updating load_avg will stop
early because the clock stays unchanged.
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Fixes: 6d4d22468dae ("sched/fair: Reorder enqueue/dequeue_task_fair path")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 0e042e847ed3..42cc3de24dcc 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5245,15 +5245,15 @@ enqueue_task_fair(struct rq *rq, struct task_struct *p, int flags)
for_each_sched_entity(se) {
cfs_rq = cfs_rq_of(se);
- /* end evaluation on encountering a throttled cfs_rq */
- if (cfs_rq_throttled(cfs_rq))
- goto enqueue_throttle;
-
update_load_avg(cfs_rq, se, UPDATE_TG);
update_cfs_group(se);
cfs_rq->h_nr_running++;
cfs_rq->idle_h_nr_running += idle_h_nr_running;
+
+ /* end evaluation on encountering a throttled cfs_rq */
+ if (cfs_rq_throttled(cfs_rq))
+ goto enqueue_throttle;
}
enqueue_throttle:
@@ -5341,15 +5341,16 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int flags)
for_each_sched_entity(se) {
cfs_rq = cfs_rq_of(se);
- /* end evaluation on encountering a throttled cfs_rq */
- if (cfs_rq_throttled(cfs_rq))
- goto dequeue_throttle;
-
update_load_avg(cfs_rq, se, UPDATE_TG);
update_cfs_group(se);
cfs_rq->h_nr_running--;
cfs_rq->idle_h_nr_running -= idle_h_nr_running;
+
+ /* end evaluation on encountering a throttled cfs_rq */
+ if (cfs_rq_throttled(cfs_rq))
+ goto dequeue_throttle;
+
}
dequeue_throttle:
--
2.25.1
From: Marco Elver <[email protected]>
commit 33cd65e73abd693c00c4156cf23677c453b41b3b upstream.
During early boot, while KASAN is not yet initialized, it is possible to
enter reporting code-path and end up in kasan_report().
While uninitialized, the branch there prevents generating any reports,
however, under certain circumstances when branches are being traced
(TRACE_BRANCH_PROFILING), we may recurse deep enough to cause kernel
reboots without warning.
To prevent similar issues in future, we should disable branch tracing
for the core runtime.
[[email protected]: remove duplicate DISABLE_BRANCH_PROFILING, per Qian Cai]
Link: https://lore.kernel.org/lkml/20200517011732.GE24705@shao2-debian/
Link: http://lkml.kernel.org/r/[email protected]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Marco Elver <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Qian Cai <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r//20200517011732.GE24705@shao2-debian/
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/kasan/Makefile | 8 ++++----
mm/kasan/generic.c | 1 -
mm/kasan/tags.c | 1 -
3 files changed, 4 insertions(+), 6 deletions(-)
--- a/mm/kasan/Makefile
+++ b/mm/kasan/Makefile
@@ -14,10 +14,10 @@ CFLAGS_REMOVE_tags.o = $(CC_FLAGS_FTRACE
# Function splitter causes unnecessary splits in __asan_load1/__asan_store1
# see: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63533
-CFLAGS_common.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector)
-CFLAGS_generic.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector)
-CFLAGS_generic_report.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector)
-CFLAGS_tags.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector)
+CFLAGS_common.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector) -DDISABLE_BRANCH_PROFILING
+CFLAGS_generic.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector) -DDISABLE_BRANCH_PROFILING
+CFLAGS_generic_report.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector) -DDISABLE_BRANCH_PROFILING
+CFLAGS_tags.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector) -DDISABLE_BRANCH_PROFILING
obj-$(CONFIG_KASAN) := common.o init.o report.o
obj-$(CONFIG_KASAN_GENERIC) += generic.o generic_report.o quarantine.o
--- a/mm/kasan/generic.c
+++ b/mm/kasan/generic.c
@@ -15,7 +15,6 @@
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#define DISABLE_BRANCH_PROFILING
#include <linux/export.h>
#include <linux/interrupt.h>
--- a/mm/kasan/tags.c
+++ b/mm/kasan/tags.c
@@ -12,7 +12,6 @@
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#define DISABLE_BRANCH_PROFILING
#include <linux/export.h>
#include <linux/interrupt.h>
From: Russell Currey <[email protected]>
[ Upstream commit c55d7b5e64265fdca45c85b639013e770bde2d0e ]
I have tested this with the Radix MMU and everything seems to work, and
the previous patch for Hash seems to fix everything too.
STRICT_KERNEL_RWX should still be disabled by default for now.
Please test STRICT_KERNEL_RWX + RELOCATABLE!
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2b1033f13210..198bbf42e398 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -133,7 +133,7 @@ config PPC
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_MEMBARRIER_CALLBACKS
select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
- select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !RELOCATABLE && !HIBERNATION)
+ select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION)
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UACCESS_FLUSHCACHE
select ARCH_HAS_UACCESS_MCSAFE if PPC64
--
2.25.1
From: Kees Cook <[email protected]>
[ Upstream commit af73d78bd384aa9b8789aa6e7ddbb165f971276f ]
When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.
Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.
Additionally move "info BTF" to the correct place since commit
8959e39272d6 ("kbuild: Parameterize kallsyms generation and correct
reporting"), which added "info LD ..." to vmlinux_link calls.
For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/link-vmlinux.sh | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 408b5c0b99b1..aa1386079f0c 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -63,12 +63,18 @@ vmlinux_link()
local lds="${objtree}/${KBUILD_LDS}"
local output=${1}
local objects
+ local strip_debug
info LD ${output}
# skip output file argument
shift
+ # The kallsyms linking does not need debug symbols included.
+ if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
+ strip_debug=-Wl,--strip-debug
+ fi
+
if [ "${SRCARCH}" != "um" ]; then
objects="--whole-archive \
${KBUILD_VMLINUX_OBJS} \
@@ -79,6 +85,7 @@ vmlinux_link()
${@}"
${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \
+ ${strip_debug#-Wl,} \
-o ${output} \
-T ${lds} ${objects}
else
@@ -91,6 +98,7 @@ vmlinux_link()
${@}"
${CC} ${CFLAGS_vmlinux} \
+ ${strip_debug} \
-o ${output} \
-Wl,-T,${lds} \
${objects} \
@@ -106,6 +114,8 @@ gen_btf()
{
local pahole_ver
local bin_arch
+ local bin_format
+ local bin_file
if ! [ -x "$(command -v ${PAHOLE})" ]; then
echo >&2 "BTF: ${1}: pahole (${PAHOLE}) is not available"
@@ -118,8 +128,9 @@ gen_btf()
return 1
fi
- info "BTF" ${2}
vmlinux_link ${1}
+
+ info "BTF" ${2}
LLVM_OBJCOPY=${OBJCOPY} ${PAHOLE} -J ${1}
# dump .BTF section into raw binary file to link with final vmlinux
@@ -127,11 +138,12 @@ gen_btf()
cut -d, -f1 | cut -d' ' -f2)
bin_format=$(LANG=C ${OBJDUMP} -f ${1} | grep 'file format' | \
awk '{print $4}')
+ bin_file=.btf.vmlinux.bin
${OBJCOPY} --change-section-address .BTF=0 \
--set-section-flags .BTF=alloc -O binary \
- --only-section=.BTF ${1} .btf.vmlinux.bin
+ --only-section=.BTF ${1} $bin_file
${OBJCOPY} -I binary -O ${bin_format} -B ${bin_arch} \
- --rename-section .data=.BTF .btf.vmlinux.bin ${2}
+ --rename-section .data=.BTF $bin_file ${2}
}
# Create ${2} .o file with all symbols from the ${1} object file
@@ -166,8 +178,8 @@ kallsyms()
kallsyms_step()
{
kallsymso_prev=${kallsymso}
- kallsymso=.tmp_kallsyms${1}.o
- kallsyms_vmlinux=.tmp_vmlinux${1}
+ kallsyms_vmlinux=.tmp_vmlinux.kallsyms${1}
+ kallsymso=${kallsyms_vmlinux}.o
vmlinux_link ${kallsyms_vmlinux} "${kallsymso_prev}" ${btf_vmlinux_bin_o}
kallsyms ${kallsyms_vmlinux} ${kallsymso}
@@ -190,7 +202,6 @@ cleanup()
{
rm -f .btf.*
rm -f .tmp_System.map
- rm -f .tmp_kallsyms*
rm -f .tmp_vmlinux*
rm -f System.map
rm -f vmlinux
@@ -253,9 +264,8 @@ ${OBJCOPY} -j .modinfo -O binary vmlinux.o modules.builtin.modinfo
btf_vmlinux_bin_o=""
if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then
- if gen_btf .tmp_vmlinux.btf .btf.vmlinux.bin.o ; then
- btf_vmlinux_bin_o=.btf.vmlinux.bin.o
- else
+ btf_vmlinux_bin_o=.btf.vmlinux.bin.o
+ if ! gen_btf .tmp_vmlinux.btf $btf_vmlinux_bin_o ; then
echo >&2 "Failed to generate BTF for vmlinux"
echo >&2 "Try to disable CONFIG_DEBUG_INFO_BTF"
exit 1
--
2.25.1
From: Bob Peterson <[email protected]>
[ Upstream commit b14c94908b1b884276a6608dea3d0b1b510338b7 ]
This reverts commit df5db5f9ee112e76b5202fbc331f990a0fc316d6.
This patch fixes a regression: patch df5db5f9ee112 allowed function
run_queue() to bypass its call to do_xmote() if revokes were queued for
the glock. That's wrong because its call to do_xmote() is what is
responsible for calling the go_sync() glops functions to sync both
the ail list and any revokes queued for it. By bypassing the call,
gfs2 could get into a stand-off where the glock could not be demoted
until its revokes are written back, but the revokes would not be
written back because do_xmote() was never called.
It "sort of" works, however, because there are other mechanisms like
the log flush daemon (logd) that can sync the ail items and revokes,
if it deems it necessary. The problem is: without file system pressure,
it might never deem it necessary.
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/gfs2/glock.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 21820a5b388f..0290a22ebccf 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -639,9 +639,6 @@ __acquires(&gl->gl_lockref.lock)
goto out_unlock;
if (nonblock)
goto out_sched;
- smp_mb();
- if (atomic_read(&gl->gl_revokes) != 0)
- goto out_sched;
set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags);
GLOCK_BUG_ON(gl, gl->gl_demote_state == LM_ST_EXCLUSIVE);
gl->gl_target = gl->gl_demote_state;
--
2.25.1
From: Fabrice Gasnier <[email protected]>
[ Upstream commit b455d06e6fb3c035711e8aab1ca18082ccb15d87 ]
DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink
Fix this by using device struct from platform device to request dma chan.
Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone")
Signed-off-by: Fabrice Gasnier <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/stm32-dfsdm-adc.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 4a9337a3f9a3..c2948defa785 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -62,7 +62,7 @@ enum sd_converter_type {
struct stm32_dfsdm_dev_data {
int type;
- int (*init)(struct iio_dev *indio_dev);
+ int (*init)(struct device *dev, struct iio_dev *indio_dev);
unsigned int num_channels;
const struct regmap_config *regmap_cfg;
};
@@ -1359,11 +1359,12 @@ static void stm32_dfsdm_dma_release(struct iio_dev *indio_dev)
}
}
-static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
+static int stm32_dfsdm_dma_request(struct device *dev,
+ struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
- adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+ adc->dma_chan = dma_request_chan(dev, "rx");
if (IS_ERR(adc->dma_chan)) {
int ret = PTR_ERR(adc->dma_chan);
@@ -1419,7 +1420,7 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
&adc->dfsdm->ch_list[ch->channel]);
}
-static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
+static int stm32_dfsdm_audio_init(struct device *dev, struct iio_dev *indio_dev)
{
struct iio_chan_spec *ch;
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
@@ -1446,10 +1447,10 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
indio_dev->num_channels = 1;
indio_dev->channels = ch;
- return stm32_dfsdm_dma_request(indio_dev);
+ return stm32_dfsdm_dma_request(dev, indio_dev);
}
-static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
+static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev)
{
struct iio_chan_spec *ch;
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
@@ -1493,17 +1494,17 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
init_completion(&adc->completion);
/* Optionally request DMA */
- ret = stm32_dfsdm_dma_request(indio_dev);
+ ret = stm32_dfsdm_dma_request(dev, indio_dev);
if (ret) {
if (ret != -ENODEV) {
if (ret != -EPROBE_DEFER)
- dev_err(&indio_dev->dev,
+ dev_err(dev,
"DMA channel request failed with %d\n",
ret);
return ret;
}
- dev_dbg(&indio_dev->dev, "No DMA support\n");
+ dev_dbg(dev, "No DMA support\n");
return 0;
}
@@ -1616,7 +1617,7 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
adc->dfsdm->fl_list[adc->fl_id].sync_mode = val;
adc->dev_data = dev_data;
- ret = dev_data->init(iio);
+ ret = dev_data->init(dev, iio);
if (ret < 0)
return ret;
--
2.25.1
From: Philipp Rudo <[email protected]>
commit 70b690547d5ea1a3d135a4cc39cd1e08246d0c3a upstream.
initrd_start must not point at the location the initrd is loaded into
the crashkernel memory but at the location it will be after the
crashkernel memory is swapped with the memory at 0.
Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader")
Reported-by: Lianbo Jiang <[email protected]>
Signed-off-by: Philipp Rudo <[email protected]>
Tested-by: Lianbo Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/machine_kexec_file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/kernel/machine_kexec_file.c
+++ b/arch/s390/kernel/machine_kexec_file.c
@@ -151,7 +151,7 @@ static int kexec_file_add_initrd(struct
buf.mem += crashk_res.start;
buf.memsz = buf.bufsz;
- data->parm->initrd_start = buf.mem;
+ data->parm->initrd_start = data->memsz;
data->parm->initrd_size = buf.memsz;
data->memsz += buf.memsz;
From: Colin Xu <[email protected]>
commit f965b68188ab59a40a421ced1b05a2fea638465c upstream.
Init value of some display vregs rea inherited from host pregs. When
host display in different status, i.e. all monitors unpluged, different
display configurations, etc., GVT virtual display setup don't consistent
thus may lead to guest driver consider display goes malfunctional.
The added init vreg values are based on PRMs and fixed by calcuation
from current configuration (only PIPE_A) and the virtual EDID.
Fixes: 04d348ae3f0a ("drm/i915/gvt: vGPU display virtualization")
Acked-by: Zhenyu Wang <[email protected]>
Signed-off-by: Colin Xu <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gvt/display.c | 49 +++++++++++++++++++++++++++++++++----
1 file changed, 44 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/i915/gvt/display.c
+++ b/drivers/gpu/drm/i915/gvt/display.c
@@ -207,14 +207,41 @@ static void emulate_monitor_status_chang
SKL_FUSE_PG_DIST_STATUS(SKL_PG0) |
SKL_FUSE_PG_DIST_STATUS(SKL_PG1) |
SKL_FUSE_PG_DIST_STATUS(SKL_PG2);
- vgpu_vreg_t(vgpu, LCPLL1_CTL) |=
- LCPLL_PLL_ENABLE |
- LCPLL_PLL_LOCK;
- vgpu_vreg_t(vgpu, LCPLL2_CTL) |= LCPLL_PLL_ENABLE;
-
+ /*
+ * Only 1 PIPE enabled in current vGPU display and PIPE_A is
+ * tied to TRANSCODER_A in HW, so it's safe to assume PIPE_A,
+ * TRANSCODER_A can be enabled. PORT_x depends on the input of
+ * setup_virtual_dp_monitor, we can bind DPLL0 to any PORT_x
+ * so we fixed to DPLL0 here.
+ * Setup DPLL0: DP link clk 1620 MHz, non SSC, DP Mode
+ */
+ vgpu_vreg_t(vgpu, DPLL_CTRL1) =
+ DPLL_CTRL1_OVERRIDE(DPLL_ID_SKL_DPLL0);
+ vgpu_vreg_t(vgpu, DPLL_CTRL1) |=
+ DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, DPLL_ID_SKL_DPLL0);
+ vgpu_vreg_t(vgpu, LCPLL1_CTL) =
+ LCPLL_PLL_ENABLE | LCPLL_PLL_LOCK;
+ vgpu_vreg_t(vgpu, DPLL_STATUS) = DPLL_LOCK(DPLL_ID_SKL_DPLL0);
+ /*
+ * Golden M/N are calculated based on:
+ * 24 bpp, 4 lanes, 154000 pixel clk (from virtual EDID),
+ * DP link clk 1620 MHz and non-constant_n.
+ * TODO: calculate DP link symbol clk and stream clk m/n.
+ */
+ vgpu_vreg_t(vgpu, PIPE_DATA_M1(TRANSCODER_A)) = 63 << TU_SIZE_SHIFT;
+ vgpu_vreg_t(vgpu, PIPE_DATA_M1(TRANSCODER_A)) |= 0x5b425e;
+ vgpu_vreg_t(vgpu, PIPE_DATA_N1(TRANSCODER_A)) = 0x800000;
+ vgpu_vreg_t(vgpu, PIPE_LINK_M1(TRANSCODER_A)) = 0x3cd6e;
+ vgpu_vreg_t(vgpu, PIPE_LINK_N1(TRANSCODER_A)) = 0x80000;
}
if (intel_vgpu_has_monitor_on_port(vgpu, PORT_B)) {
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) &=
+ ~DPLL_CTRL2_DDI_CLK_OFF(PORT_B);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_CLK_SEL(DPLL_ID_SKL_DPLL0, PORT_B);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_SEL_OVERRIDE(PORT_B);
vgpu_vreg_t(vgpu, SFUSE_STRAP) |= SFUSE_STRAP_DDIB_DETECTED;
vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
@@ -235,6 +262,12 @@ static void emulate_monitor_status_chang
}
if (intel_vgpu_has_monitor_on_port(vgpu, PORT_C)) {
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) &=
+ ~DPLL_CTRL2_DDI_CLK_OFF(PORT_C);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_CLK_SEL(DPLL_ID_SKL_DPLL0, PORT_C);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_SEL_OVERRIDE(PORT_C);
vgpu_vreg_t(vgpu, SDEISR) |= SDE_PORTC_HOTPLUG_CPT;
vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
@@ -255,6 +288,12 @@ static void emulate_monitor_status_chang
}
if (intel_vgpu_has_monitor_on_port(vgpu, PORT_D)) {
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) &=
+ ~DPLL_CTRL2_DDI_CLK_OFF(PORT_D);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_CLK_SEL(DPLL_ID_SKL_DPLL0, PORT_D);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_SEL_OVERRIDE(PORT_D);
vgpu_vreg_t(vgpu, SDEISR) |= SDE_PORTD_HOTPLUG_CPT;
vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
From: David Howells <[email protected]>
commit c410bf01933e5e09d142c66c3df9ad470a7eec13 upstream.
rxrpc currently uses a fixed 4s retransmission timeout until the RTT is
sufficiently sampled. This can cause problems with some fileservers with
calls to the cache manager in the afs filesystem being dropped from the
fileserver because a packet goes missing and the retransmission timeout is
greater than the call expiry timeout.
Fix this by:
(1) Copying the RTT/RTO calculation code from Linux's TCP implementation
and altering it to fit rxrpc.
(2) Altering the various users of the RTT to make use of the new SRTT
value.
(3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO
value instead (which is needed in jiffies), along with a backoff.
Notes:
(1) rxrpc provides RTT samples by matching the serial numbers on outgoing
DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets
against the reference serial number in incoming REQUESTED ACK and
PING-RESPONSE ACK packets.
(2) Each packet that is transmitted on an rxrpc connection gets a new
per-connection serial number, even for retransmissions, so an ACK can
be cross-referenced to a specific trigger packet. This allows RTT
information to be drawn from retransmitted DATA packets also.
(3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than
on an rxrpc_call because many RPC calls won't live long enough to
generate more than one sample.
(4) The calculated SRTT value is in units of 8ths of a microsecond rather
than nanoseconds.
The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers.
Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/fs_probe.c | 18 +--
fs/afs/vl_probe.c | 18 +--
include/net/af_rxrpc.h | 2
include/trace/events/rxrpc.h | 17 +--
net/rxrpc/Makefile | 1
net/rxrpc/ar-internal.h | 25 +++--
net/rxrpc/call_accept.c | 2
net/rxrpc/call_event.c | 22 +---
net/rxrpc/input.c | 6 -
net/rxrpc/misc.c | 5 -
net/rxrpc/output.c | 9 -
net/rxrpc/peer_event.c | 46 ----------
net/rxrpc/peer_object.c | 12 +-
net/rxrpc/proc.c | 8 -
net/rxrpc/rtt.c | 195 +++++++++++++++++++++++++++++++++++++++++++
net/rxrpc/sendmsg.c | 26 +----
net/rxrpc/sysctl.c | 9 -
17 files changed, 266 insertions(+), 155 deletions(-)
--- a/fs/afs/fs_probe.c
+++ b/fs/afs/fs_probe.c
@@ -32,9 +32,8 @@ void afs_fileserver_probe_result(struct
struct afs_server *server = call->server;
unsigned int server_index = call->server_index;
unsigned int index = call->addr_ix;
- unsigned int rtt = UINT_MAX;
+ unsigned int rtt_us;
bool have_result = false;
- u64 _rtt;
int ret = call->error;
_enter("%pU,%u", &server->uuid, index);
@@ -93,15 +92,9 @@ responded:
}
}
- /* Get the RTT and scale it to fit into a 32-bit value that represents
- * over a minute of time so that we can access it with one instruction
- * on a 32-bit system.
- */
- _rtt = rxrpc_kernel_get_rtt(call->net->socket, call->rxcall);
- _rtt /= 64;
- rtt = (_rtt > UINT_MAX) ? UINT_MAX : _rtt;
- if (rtt < server->probe.rtt) {
- server->probe.rtt = rtt;
+ rtt_us = rxrpc_kernel_get_srtt(call->net->socket, call->rxcall);
+ if (rtt_us < server->probe.rtt) {
+ server->probe.rtt = rtt_us;
alist->preferred = index;
have_result = true;
}
@@ -113,8 +106,7 @@ out:
spin_unlock(&server->probe_lock);
_debug("probe [%u][%u] %pISpc rtt=%u ret=%d",
- server_index, index, &alist->addrs[index].transport,
- (unsigned int)rtt, ret);
+ server_index, index, &alist->addrs[index].transport, rtt_us, ret);
have_result |= afs_fs_probe_done(server);
if (have_result) {
--- a/fs/afs/vl_probe.c
+++ b/fs/afs/vl_probe.c
@@ -31,10 +31,9 @@ void afs_vlserver_probe_result(struct af
struct afs_addr_list *alist = call->alist;
struct afs_vlserver *server = call->vlserver;
unsigned int server_index = call->server_index;
+ unsigned int rtt_us = 0;
unsigned int index = call->addr_ix;
- unsigned int rtt = UINT_MAX;
bool have_result = false;
- u64 _rtt;
int ret = call->error;
_enter("%s,%u,%u,%d,%d", server->name, server_index, index, ret, call->abort_code);
@@ -93,15 +92,9 @@ responded:
}
}
- /* Get the RTT and scale it to fit into a 32-bit value that represents
- * over a minute of time so that we can access it with one instruction
- * on a 32-bit system.
- */
- _rtt = rxrpc_kernel_get_rtt(call->net->socket, call->rxcall);
- _rtt /= 64;
- rtt = (_rtt > UINT_MAX) ? UINT_MAX : _rtt;
- if (rtt < server->probe.rtt) {
- server->probe.rtt = rtt;
+ rtt_us = rxrpc_kernel_get_srtt(call->net->socket, call->rxcall);
+ if (rtt_us < server->probe.rtt) {
+ server->probe.rtt = rtt_us;
alist->preferred = index;
have_result = true;
}
@@ -113,8 +106,7 @@ out:
spin_unlock(&server->probe_lock);
_debug("probe [%u][%u] %pISpc rtt=%u ret=%d",
- server_index, index, &alist->addrs[index].transport,
- (unsigned int)rtt, ret);
+ server_index, index, &alist->addrs[index].transport, rtt_us, ret);
have_result |= afs_vl_probe_done(server);
if (have_result) {
--- a/include/net/af_rxrpc.h
+++ b/include/net/af_rxrpc.h
@@ -59,7 +59,7 @@ bool rxrpc_kernel_abort_call(struct sock
void rxrpc_kernel_end_call(struct socket *, struct rxrpc_call *);
void rxrpc_kernel_get_peer(struct socket *, struct rxrpc_call *,
struct sockaddr_rxrpc *);
-u64 rxrpc_kernel_get_rtt(struct socket *, struct rxrpc_call *);
+u32 rxrpc_kernel_get_srtt(struct socket *, struct rxrpc_call *);
int rxrpc_kernel_charge_accept(struct socket *, rxrpc_notify_rx_t,
rxrpc_user_attach_call_t, unsigned long, gfp_t,
unsigned int);
--- a/include/trace/events/rxrpc.h
+++ b/include/trace/events/rxrpc.h
@@ -1112,18 +1112,17 @@ TRACE_EVENT(rxrpc_rtt_tx,
TRACE_EVENT(rxrpc_rtt_rx,
TP_PROTO(struct rxrpc_call *call, enum rxrpc_rtt_rx_trace why,
rxrpc_serial_t send_serial, rxrpc_serial_t resp_serial,
- s64 rtt, u8 nr, s64 avg),
+ u32 rtt, u32 rto),
- TP_ARGS(call, why, send_serial, resp_serial, rtt, nr, avg),
+ TP_ARGS(call, why, send_serial, resp_serial, rtt, rto),
TP_STRUCT__entry(
__field(unsigned int, call )
__field(enum rxrpc_rtt_rx_trace, why )
- __field(u8, nr )
__field(rxrpc_serial_t, send_serial )
__field(rxrpc_serial_t, resp_serial )
- __field(s64, rtt )
- __field(u64, avg )
+ __field(u32, rtt )
+ __field(u32, rto )
),
TP_fast_assign(
@@ -1132,18 +1131,16 @@ TRACE_EVENT(rxrpc_rtt_rx,
__entry->send_serial = send_serial;
__entry->resp_serial = resp_serial;
__entry->rtt = rtt;
- __entry->nr = nr;
- __entry->avg = avg;
+ __entry->rto = rto;
),
- TP_printk("c=%08x %s sr=%08x rr=%08x rtt=%lld nr=%u avg=%lld",
+ TP_printk("c=%08x %s sr=%08x rr=%08x rtt=%u rto=%u",
__entry->call,
__print_symbolic(__entry->why, rxrpc_rtt_rx_traces),
__entry->send_serial,
__entry->resp_serial,
__entry->rtt,
- __entry->nr,
- __entry->avg)
+ __entry->rto)
);
TRACE_EVENT(rxrpc_timer,
--- a/net/rxrpc/Makefile
+++ b/net/rxrpc/Makefile
@@ -25,6 +25,7 @@ rxrpc-y := \
peer_event.o \
peer_object.o \
recvmsg.o \
+ rtt.o \
security.o \
sendmsg.o \
skbuff.o \
--- a/net/rxrpc/ar-internal.h
+++ b/net/rxrpc/ar-internal.h
@@ -7,6 +7,7 @@
#include <linux/atomic.h>
#include <linux/seqlock.h>
+#include <linux/win_minmax.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <net/sock.h>
@@ -311,11 +312,14 @@ struct rxrpc_peer {
#define RXRPC_RTT_CACHE_SIZE 32
spinlock_t rtt_input_lock; /* RTT lock for input routine */
ktime_t rtt_last_req; /* Time of last RTT request */
- u64 rtt; /* Current RTT estimate (in nS) */
- u64 rtt_sum; /* Sum of cache contents */
- u64 rtt_cache[RXRPC_RTT_CACHE_SIZE]; /* Determined RTT cache */
- u8 rtt_cursor; /* next entry at which to insert */
- u8 rtt_usage; /* amount of cache actually used */
+ unsigned int rtt_count; /* Number of samples we've got */
+
+ u32 srtt_us; /* smoothed round trip time << 3 in usecs */
+ u32 mdev_us; /* medium deviation */
+ u32 mdev_max_us; /* maximal mdev for the last rtt period */
+ u32 rttvar_us; /* smoothed mdev_max */
+ u32 rto_j; /* Retransmission timeout in jiffies */
+ u8 backoff; /* Backoff timeout */
u8 cong_cwnd; /* Congestion window size */
};
@@ -1041,7 +1045,6 @@ extern unsigned long rxrpc_idle_ack_dela
extern unsigned int rxrpc_rx_window_size;
extern unsigned int rxrpc_rx_mtu;
extern unsigned int rxrpc_rx_jumbo_max;
-extern unsigned long rxrpc_resend_timeout;
extern const s8 rxrpc_ack_priority[];
@@ -1069,8 +1072,6 @@ void rxrpc_send_keepalive(struct rxrpc_p
* peer_event.c
*/
void rxrpc_error_report(struct sock *);
-void rxrpc_peer_add_rtt(struct rxrpc_call *, enum rxrpc_rtt_rx_trace,
- rxrpc_serial_t, rxrpc_serial_t, ktime_t, ktime_t);
void rxrpc_peer_keepalive_worker(struct work_struct *);
/*
@@ -1103,6 +1104,14 @@ void rxrpc_notify_socket(struct rxrpc_ca
int rxrpc_recvmsg(struct socket *, struct msghdr *, size_t, int);
/*
+ * rtt.c
+ */
+void rxrpc_peer_add_rtt(struct rxrpc_call *, enum rxrpc_rtt_rx_trace,
+ rxrpc_serial_t, rxrpc_serial_t, ktime_t, ktime_t);
+unsigned long rxrpc_get_rto_backoff(struct rxrpc_peer *, bool);
+void rxrpc_peer_init_rtt(struct rxrpc_peer *);
+
+/*
* rxkad.c
*/
#ifdef CONFIG_RXKAD
--- a/net/rxrpc/call_accept.c
+++ b/net/rxrpc/call_accept.c
@@ -248,7 +248,7 @@ static void rxrpc_send_ping(struct rxrpc
struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
ktime_t now = skb->tstamp;
- if (call->peer->rtt_usage < 3 ||
+ if (call->peer->rtt_count < 3 ||
ktime_before(ktime_add_ms(call->peer->rtt_last_req, 1000), now))
rxrpc_propose_ACK(call, RXRPC_ACK_PING, sp->hdr.serial,
true, true,
--- a/net/rxrpc/call_event.c
+++ b/net/rxrpc/call_event.c
@@ -111,8 +111,8 @@ static void __rxrpc_propose_ACK(struct r
} else {
unsigned long now = jiffies, ack_at;
- if (call->peer->rtt_usage > 0)
- ack_at = nsecs_to_jiffies(call->peer->rtt);
+ if (call->peer->srtt_us != 0)
+ ack_at = usecs_to_jiffies(call->peer->srtt_us >> 3);
else
ack_at = expiry;
@@ -157,24 +157,18 @@ static void rxrpc_congestion_timeout(str
static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j)
{
struct sk_buff *skb;
- unsigned long resend_at;
+ unsigned long resend_at, rto_j;
rxrpc_seq_t cursor, seq, top;
- ktime_t now, max_age, oldest, ack_ts, timeout, min_timeo;
+ ktime_t now, max_age, oldest, ack_ts;
int ix;
u8 annotation, anno_type, retrans = 0, unacked = 0;
_enter("{%d,%d}", call->tx_hard_ack, call->tx_top);
- if (call->peer->rtt_usage > 1)
- timeout = ns_to_ktime(call->peer->rtt * 3 / 2);
- else
- timeout = ms_to_ktime(rxrpc_resend_timeout);
- min_timeo = ns_to_ktime((1000000000 / HZ) * 4);
- if (ktime_before(timeout, min_timeo))
- timeout = min_timeo;
+ rto_j = call->peer->rto_j;
now = ktime_get_real();
- max_age = ktime_sub(now, timeout);
+ max_age = ktime_sub(now, jiffies_to_usecs(rto_j));
spin_lock_bh(&call->lock);
@@ -219,7 +213,7 @@ static void rxrpc_resend(struct rxrpc_ca
}
resend_at = nsecs_to_jiffies(ktime_to_ns(ktime_sub(now, oldest)));
- resend_at += jiffies + rxrpc_resend_timeout;
+ resend_at += jiffies + rto_j;
WRITE_ONCE(call->resend_at, resend_at);
if (unacked)
@@ -234,7 +228,7 @@ static void rxrpc_resend(struct rxrpc_ca
rxrpc_timer_set_for_resend);
spin_unlock_bh(&call->lock);
ack_ts = ktime_sub(now, call->acks_latest_ts);
- if (ktime_to_ns(ack_ts) < call->peer->rtt)
+ if (ktime_to_us(ack_ts) < (call->peer->srtt_us >> 3))
goto out;
rxrpc_propose_ACK(call, RXRPC_ACK_PING, 0, true, false,
rxrpc_propose_ack_ping_for_lost_ack);
--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -91,11 +91,11 @@ static void rxrpc_congestion_management(
/* We analyse the number of packets that get ACK'd per RTT
* period and increase the window if we managed to fill it.
*/
- if (call->peer->rtt_usage == 0)
+ if (call->peer->rtt_count == 0)
goto out;
if (ktime_before(skb->tstamp,
- ktime_add_ns(call->cong_tstamp,
- call->peer->rtt)))
+ ktime_add_us(call->cong_tstamp,
+ call->peer->srtt_us >> 3)))
goto out_no_clear_ca;
change = rxrpc_cong_rtt_window_end;
call->cong_tstamp = skb->tstamp;
--- a/net/rxrpc/misc.c
+++ b/net/rxrpc/misc.c
@@ -63,11 +63,6 @@ unsigned int rxrpc_rx_mtu = 5692;
*/
unsigned int rxrpc_rx_jumbo_max = 4;
-/*
- * Time till packet resend (in milliseconds).
- */
-unsigned long rxrpc_resend_timeout = 4 * HZ;
-
const s8 rxrpc_ack_priority[] = {
[0] = 0,
[RXRPC_ACK_DELAY] = 1,
--- a/net/rxrpc/output.c
+++ b/net/rxrpc/output.c
@@ -369,7 +369,7 @@ int rxrpc_send_data_packet(struct rxrpc_
(test_and_clear_bit(RXRPC_CALL_EV_ACK_LOST, &call->events) ||
retrans ||
call->cong_mode == RXRPC_CALL_SLOW_START ||
- (call->peer->rtt_usage < 3 && sp->hdr.seq & 1) ||
+ (call->peer->rtt_count < 3 && sp->hdr.seq & 1) ||
ktime_before(ktime_add_ms(call->peer->rtt_last_req, 1000),
ktime_get_real())))
whdr.flags |= RXRPC_REQUEST_ACK;
@@ -423,13 +423,10 @@ done:
if (whdr.flags & RXRPC_REQUEST_ACK) {
call->peer->rtt_last_req = skb->tstamp;
trace_rxrpc_rtt_tx(call, rxrpc_rtt_tx_data, serial);
- if (call->peer->rtt_usage > 1) {
+ if (call->peer->rtt_count > 1) {
unsigned long nowj = jiffies, ack_lost_at;
- ack_lost_at = nsecs_to_jiffies(2 * call->peer->rtt);
- if (ack_lost_at < 1)
- ack_lost_at = 1;
-
+ ack_lost_at = rxrpc_get_rto_backoff(call->peer, retrans);
ack_lost_at += nowj;
WRITE_ONCE(call->ack_lost_at, ack_lost_at);
rxrpc_reduce_call_timer(call, ack_lost_at, nowj,
--- a/net/rxrpc/peer_event.c
+++ b/net/rxrpc/peer_event.c
@@ -296,52 +296,6 @@ static void rxrpc_distribute_error(struc
}
/*
- * Add RTT information to cache. This is called in softirq mode and has
- * exclusive access to the peer RTT data.
- */
-void rxrpc_peer_add_rtt(struct rxrpc_call *call, enum rxrpc_rtt_rx_trace why,
- rxrpc_serial_t send_serial, rxrpc_serial_t resp_serial,
- ktime_t send_time, ktime_t resp_time)
-{
- struct rxrpc_peer *peer = call->peer;
- s64 rtt;
- u64 sum = peer->rtt_sum, avg;
- u8 cursor = peer->rtt_cursor, usage = peer->rtt_usage;
-
- rtt = ktime_to_ns(ktime_sub(resp_time, send_time));
- if (rtt < 0)
- return;
-
- spin_lock(&peer->rtt_input_lock);
-
- /* Replace the oldest datum in the RTT buffer */
- sum -= peer->rtt_cache[cursor];
- sum += rtt;
- peer->rtt_cache[cursor] = rtt;
- peer->rtt_cursor = (cursor + 1) & (RXRPC_RTT_CACHE_SIZE - 1);
- peer->rtt_sum = sum;
- if (usage < RXRPC_RTT_CACHE_SIZE) {
- usage++;
- peer->rtt_usage = usage;
- }
-
- spin_unlock(&peer->rtt_input_lock);
-
- /* Now recalculate the average */
- if (usage == RXRPC_RTT_CACHE_SIZE) {
- avg = sum / RXRPC_RTT_CACHE_SIZE;
- } else {
- avg = sum;
- do_div(avg, usage);
- }
-
- /* Don't need to update this under lock */
- peer->rtt = avg;
- trace_rxrpc_rtt_rx(call, why, send_serial, resp_serial, rtt,
- usage, avg);
-}
-
-/*
* Perform keep-alive pings.
*/
static void rxrpc_peer_keepalive_dispatch(struct rxrpc_net *rxnet,
--- a/net/rxrpc/peer_object.c
+++ b/net/rxrpc/peer_object.c
@@ -224,6 +224,8 @@ struct rxrpc_peer *rxrpc_alloc_peer(stru
spin_lock_init(&peer->rtt_input_lock);
peer->debug_id = atomic_inc_return(&rxrpc_debug_id);
+ rxrpc_peer_init_rtt(peer);
+
if (RXRPC_TX_SMSS > 2190)
peer->cong_cwnd = 2;
else if (RXRPC_TX_SMSS > 1095)
@@ -495,14 +497,14 @@ void rxrpc_kernel_get_peer(struct socket
EXPORT_SYMBOL(rxrpc_kernel_get_peer);
/**
- * rxrpc_kernel_get_rtt - Get a call's peer RTT
+ * rxrpc_kernel_get_srtt - Get a call's peer smoothed RTT
* @sock: The socket on which the call is in progress.
* @call: The call to query
*
- * Get the call's peer RTT.
+ * Get the call's peer smoothed RTT.
*/
-u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call)
+u32 rxrpc_kernel_get_srtt(struct socket *sock, struct rxrpc_call *call)
{
- return call->peer->rtt;
+ return call->peer->srtt_us >> 3;
}
-EXPORT_SYMBOL(rxrpc_kernel_get_rtt);
+EXPORT_SYMBOL(rxrpc_kernel_get_srtt);
--- a/net/rxrpc/proc.c
+++ b/net/rxrpc/proc.c
@@ -222,7 +222,7 @@ static int rxrpc_peer_seq_show(struct se
seq_puts(seq,
"Proto Local "
" Remote "
- " Use CW MTU LastUse RTT Rc\n"
+ " Use CW MTU LastUse RTT RTO\n"
);
return 0;
}
@@ -236,15 +236,15 @@ static int rxrpc_peer_seq_show(struct se
now = ktime_get_seconds();
seq_printf(seq,
"UDP %-47.47s %-47.47s %3u"
- " %3u %5u %6llus %12llu %2u\n",
+ " %3u %5u %6llus %8u %8u\n",
lbuff,
rbuff,
atomic_read(&peer->usage),
peer->cong_cwnd,
peer->mtu,
now - peer->last_tx_at,
- peer->rtt,
- peer->rtt_cursor);
+ peer->srtt_us >> 3,
+ jiffies_to_usecs(peer->rto_j));
return 0;
}
--- /dev/null
+++ b/net/rxrpc/rtt.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/* RTT/RTO calculation.
+ *
+ * Adapted from TCP for AF_RXRPC by David Howells ([email protected])
+ *
+ * https://tools.ietf.org/html/rfc6298
+ * https://tools.ietf.org/html/rfc1122#section-4.2.3.1
+ * http://ccr.sigcomm.org/archive/1995/jan95/ccr-9501-partridge87.pdf
+ */
+
+#include <linux/net.h>
+#include "ar-internal.h"
+
+#define RXRPC_RTO_MAX ((unsigned)(120 * HZ))
+#define RXRPC_TIMEOUT_INIT ((unsigned)(1*HZ)) /* RFC6298 2.1 initial RTO value */
+#define rxrpc_jiffies32 ((u32)jiffies) /* As rxrpc_jiffies32 */
+#define rxrpc_min_rtt_wlen 300 /* As sysctl_tcp_min_rtt_wlen */
+
+static u32 rxrpc_rto_min_us(struct rxrpc_peer *peer)
+{
+ return 200;
+}
+
+static u32 __rxrpc_set_rto(const struct rxrpc_peer *peer)
+{
+ return _usecs_to_jiffies((peer->srtt_us >> 3) + peer->rttvar_us);
+}
+
+static u32 rxrpc_bound_rto(u32 rto)
+{
+ return min(rto, RXRPC_RTO_MAX);
+}
+
+/*
+ * Called to compute a smoothed rtt estimate. The data fed to this
+ * routine either comes from timestamps, or from segments that were
+ * known _not_ to have been retransmitted [see Karn/Partridge
+ * Proceedings SIGCOMM 87]. The algorithm is from the SIGCOMM 88
+ * piece by Van Jacobson.
+ * NOTE: the next three routines used to be one big routine.
+ * To save cycles in the RFC 1323 implementation it was better to break
+ * it up into three procedures. -- erics
+ */
+static void rxrpc_rtt_estimator(struct rxrpc_peer *peer, long sample_rtt_us)
+{
+ long m = sample_rtt_us; /* RTT */
+ u32 srtt = peer->srtt_us;
+
+ /* The following amusing code comes from Jacobson's
+ * article in SIGCOMM '88. Note that rtt and mdev
+ * are scaled versions of rtt and mean deviation.
+ * This is designed to be as fast as possible
+ * m stands for "measurement".
+ *
+ * On a 1990 paper the rto value is changed to:
+ * RTO = rtt + 4 * mdev
+ *
+ * Funny. This algorithm seems to be very broken.
+ * These formulae increase RTO, when it should be decreased, increase
+ * too slowly, when it should be increased quickly, decrease too quickly
+ * etc. I guess in BSD RTO takes ONE value, so that it is absolutely
+ * does not matter how to _calculate_ it. Seems, it was trap
+ * that VJ failed to avoid. 8)
+ */
+ if (srtt != 0) {
+ m -= (srtt >> 3); /* m is now error in rtt est */
+ srtt += m; /* rtt = 7/8 rtt + 1/8 new */
+ if (m < 0) {
+ m = -m; /* m is now abs(error) */
+ m -= (peer->mdev_us >> 2); /* similar update on mdev */
+ /* This is similar to one of Eifel findings.
+ * Eifel blocks mdev updates when rtt decreases.
+ * This solution is a bit different: we use finer gain
+ * for mdev in this case (alpha*beta).
+ * Like Eifel it also prevents growth of rto,
+ * but also it limits too fast rto decreases,
+ * happening in pure Eifel.
+ */
+ if (m > 0)
+ m >>= 3;
+ } else {
+ m -= (peer->mdev_us >> 2); /* similar update on mdev */
+ }
+
+ peer->mdev_us += m; /* mdev = 3/4 mdev + 1/4 new */
+ if (peer->mdev_us > peer->mdev_max_us) {
+ peer->mdev_max_us = peer->mdev_us;
+ if (peer->mdev_max_us > peer->rttvar_us)
+ peer->rttvar_us = peer->mdev_max_us;
+ }
+ } else {
+ /* no previous measure. */
+ srtt = m << 3; /* take the measured time to be rtt */
+ peer->mdev_us = m << 1; /* make sure rto = 3*rtt */
+ peer->rttvar_us = max(peer->mdev_us, rxrpc_rto_min_us(peer));
+ peer->mdev_max_us = peer->rttvar_us;
+ }
+
+ peer->srtt_us = max(1U, srtt);
+}
+
+/*
+ * Calculate rto without backoff. This is the second half of Van Jacobson's
+ * routine referred to above.
+ */
+static void rxrpc_set_rto(struct rxrpc_peer *peer)
+{
+ u32 rto;
+
+ /* 1. If rtt variance happened to be less 50msec, it is hallucination.
+ * It cannot be less due to utterly erratic ACK generation made
+ * at least by solaris and freebsd. "Erratic ACKs" has _nothing_
+ * to do with delayed acks, because at cwnd>2 true delack timeout
+ * is invisible. Actually, Linux-2.4 also generates erratic
+ * ACKs in some circumstances.
+ */
+ rto = __rxrpc_set_rto(peer);
+
+ /* 2. Fixups made earlier cannot be right.
+ * If we do not estimate RTO correctly without them,
+ * all the algo is pure shit and should be replaced
+ * with correct one. It is exactly, which we pretend to do.
+ */
+
+ /* NOTE: clamping at RXRPC_RTO_MIN is not required, current algo
+ * guarantees that rto is higher.
+ */
+ peer->rto_j = rxrpc_bound_rto(rto);
+}
+
+static void rxrpc_ack_update_rtt(struct rxrpc_peer *peer, long rtt_us)
+{
+ if (rtt_us < 0)
+ return;
+
+ //rxrpc_update_rtt_min(peer, rtt_us);
+ rxrpc_rtt_estimator(peer, rtt_us);
+ rxrpc_set_rto(peer);
+
+ /* RFC6298: only reset backoff on valid RTT measurement. */
+ peer->backoff = 0;
+}
+
+/*
+ * Add RTT information to cache. This is called in softirq mode and has
+ * exclusive access to the peer RTT data.
+ */
+void rxrpc_peer_add_rtt(struct rxrpc_call *call, enum rxrpc_rtt_rx_trace why,
+ rxrpc_serial_t send_serial, rxrpc_serial_t resp_serial,
+ ktime_t send_time, ktime_t resp_time)
+{
+ struct rxrpc_peer *peer = call->peer;
+ s64 rtt_us;
+
+ rtt_us = ktime_to_us(ktime_sub(resp_time, send_time));
+ if (rtt_us < 0)
+ return;
+
+ spin_lock(&peer->rtt_input_lock);
+ rxrpc_ack_update_rtt(peer, rtt_us);
+ if (peer->rtt_count < 3)
+ peer->rtt_count++;
+ spin_unlock(&peer->rtt_input_lock);
+
+ trace_rxrpc_rtt_rx(call, why, send_serial, resp_serial,
+ peer->srtt_us >> 3, peer->rto_j);
+}
+
+/*
+ * Get the retransmission timeout to set in jiffies, backing it off each time
+ * we retransmit.
+ */
+unsigned long rxrpc_get_rto_backoff(struct rxrpc_peer *peer, bool retrans)
+{
+ u64 timo_j;
+ u8 backoff = READ_ONCE(peer->backoff);
+
+ timo_j = peer->rto_j;
+ timo_j <<= backoff;
+ if (retrans && timo_j * 2 <= RXRPC_RTO_MAX)
+ WRITE_ONCE(peer->backoff, backoff + 1);
+
+ if (timo_j < 1)
+ timo_j = 1;
+
+ return timo_j;
+}
+
+void rxrpc_peer_init_rtt(struct rxrpc_peer *peer)
+{
+ peer->rto_j = RXRPC_TIMEOUT_INIT;
+ peer->mdev_us = jiffies_to_usecs(RXRPC_TIMEOUT_INIT);
+ peer->backoff = 0;
+ //minmax_reset(&peer->rtt_min, rxrpc_jiffies32, ~0U);
+}
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -66,15 +66,14 @@ static int rxrpc_wait_for_tx_window_wait
struct rxrpc_call *call)
{
rxrpc_seq_t tx_start, tx_win;
- signed long rtt2, timeout;
- u64 rtt;
+ signed long rtt, timeout;
- rtt = READ_ONCE(call->peer->rtt);
- rtt2 = nsecs_to_jiffies64(rtt) * 2;
- if (rtt2 < 2)
- rtt2 = 2;
+ rtt = READ_ONCE(call->peer->srtt_us) >> 3;
+ rtt = usecs_to_jiffies(rtt) * 2;
+ if (rtt < 2)
+ rtt = 2;
- timeout = rtt2;
+ timeout = rtt;
tx_start = READ_ONCE(call->tx_hard_ack);
for (;;) {
@@ -92,7 +91,7 @@ static int rxrpc_wait_for_tx_window_wait
return -EINTR;
if (tx_win != tx_start) {
- timeout = rtt2;
+ timeout = rtt;
tx_start = tx_win;
}
@@ -271,16 +270,9 @@ static int rxrpc_queue_packet(struct rxr
_debug("need instant resend %d", ret);
rxrpc_instant_resend(call, ix);
} else {
- unsigned long now = jiffies, resend_at;
+ unsigned long now = jiffies;
+ unsigned long resend_at = now + call->peer->rto_j;
- if (call->peer->rtt_usage > 1)
- resend_at = nsecs_to_jiffies(call->peer->rtt * 3 / 2);
- else
- resend_at = rxrpc_resend_timeout;
- if (resend_at < 1)
- resend_at = 1;
-
- resend_at += now;
WRITE_ONCE(call->resend_at, resend_at);
rxrpc_reduce_call_timer(call, resend_at, now,
rxrpc_timer_set_for_send);
--- a/net/rxrpc/sysctl.c
+++ b/net/rxrpc/sysctl.c
@@ -71,15 +71,6 @@ static struct ctl_table rxrpc_sysctl_tab
.extra1 = (void *)&one_jiffy,
.extra2 = (void *)&max_jiffies,
},
- {
- .procname = "resend_timeout",
- .data = &rxrpc_resend_timeout,
- .maxlen = sizeof(unsigned long),
- .mode = 0644,
- .proc_handler = proc_doulongvec_ms_jiffies_minmax,
- .extra1 = (void *)&one_jiffy,
- .extra2 = (void *)&max_jiffies,
- },
/* Non-time values */
{
From: Gerald Schaefer <[email protected]>
commit 4c1cbcbd6c56c79de2c07159be4f55386bb0bef2 upstream.
With certain kernel configurations, the R_390_JMP_SLOT relocation type
might be generated, which is not expected by the KASLR relocation code,
and the kernel stops with the message "Unknown relocation type".
This was found with a zfcpdump kernel config, where CONFIG_MODULES=n
and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined
__weak symbols in virt/kvm/vfio.c, which results in the generation
of R_390_JMP_SLOT relocation types.
Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT.
Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel")
Cc: <[email protected]> # v5.2+
Signed-off-by: Gerald Schaefer <[email protected]>
Reviewed-by: Philipp Rudo <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/machine_kexec_reloc.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/s390/kernel/machine_kexec_reloc.c
+++ b/arch/s390/kernel/machine_kexec_reloc.c
@@ -28,6 +28,7 @@ int arch_kexec_do_relocs(int r_type, voi
break;
case R_390_64: /* Direct 64 bit. */
case R_390_GLOB_DAT:
+ case R_390_JMP_SLOT:
*(u64 *)loc = val;
break;
case R_390_PC16: /* PC relative 16 bit. */
From: David Howells <[email protected]>
[ Upstream commit d1f129470e6cb79b8b97fecd12689f6eb49e27fe ]
Add a tracepoint to track received ACKs that are discarded due to being
outside of the Tx window.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/trace/events/rxrpc.h | 35 +++++++++++++++++++++++++++++++++++
net/rxrpc/input.c | 12 ++++++++++--
2 files changed, 45 insertions(+), 2 deletions(-)
diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h
index ab75f261f04a..ba9efdc848f9 100644
--- a/include/trace/events/rxrpc.h
+++ b/include/trace/events/rxrpc.h
@@ -1541,6 +1541,41 @@ TRACE_EVENT(rxrpc_notify_socket,
__entry->serial)
);
+TRACE_EVENT(rxrpc_rx_discard_ack,
+ TP_PROTO(unsigned int debug_id, rxrpc_serial_t serial,
+ rxrpc_seq_t first_soft_ack, rxrpc_seq_t call_ackr_first,
+ rxrpc_seq_t prev_pkt, rxrpc_seq_t call_ackr_prev),
+
+ TP_ARGS(debug_id, serial, first_soft_ack, call_ackr_first,
+ prev_pkt, call_ackr_prev),
+
+ TP_STRUCT__entry(
+ __field(unsigned int, debug_id )
+ __field(rxrpc_serial_t, serial )
+ __field(rxrpc_seq_t, first_soft_ack)
+ __field(rxrpc_seq_t, call_ackr_first)
+ __field(rxrpc_seq_t, prev_pkt)
+ __field(rxrpc_seq_t, call_ackr_prev)
+ ),
+
+ TP_fast_assign(
+ __entry->debug_id = debug_id;
+ __entry->serial = serial;
+ __entry->first_soft_ack = first_soft_ack;
+ __entry->call_ackr_first = call_ackr_first;
+ __entry->prev_pkt = prev_pkt;
+ __entry->call_ackr_prev = call_ackr_prev;
+ ),
+
+ TP_printk("c=%08x r=%08x %08x<%08x %08x<%08x",
+ __entry->debug_id,
+ __entry->serial,
+ __entry->first_soft_ack,
+ __entry->call_ackr_first,
+ __entry->prev_pkt,
+ __entry->call_ackr_prev)
+ );
+
#endif /* _TRACE_RXRPC_H */
/* This part must be outside protection */
diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c
index e438bfd3fdf5..2f22f082a66c 100644
--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -866,8 +866,12 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb)
/* Discard any out-of-order or duplicate ACKs (outside lock). */
if (before(first_soft_ack, call->ackr_first_seq) ||
- before(prev_pkt, call->ackr_prev_seq))
+ before(prev_pkt, call->ackr_prev_seq)) {
+ trace_rxrpc_rx_discard_ack(call->debug_id, sp->hdr.serial,
+ first_soft_ack, call->ackr_first_seq,
+ prev_pkt, call->ackr_prev_seq);
return;
+ }
buf.info.rxMTU = 0;
ioffset = offset + nr_acks + 3;
@@ -879,8 +883,12 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb)
/* Discard any out-of-order or duplicate ACKs (inside lock). */
if (before(first_soft_ack, call->ackr_first_seq) ||
- before(prev_pkt, call->ackr_prev_seq))
+ before(prev_pkt, call->ackr_prev_seq)) {
+ trace_rxrpc_rx_discard_ack(call->debug_id, sp->hdr.serial,
+ first_soft_ack, call->ackr_first_seq,
+ prev_pkt, call->ackr_prev_seq);
goto out;
+ }
call->acks_latest_ts = skb->tstamp;
call->ackr_first_seq = first_soft_ack;
--
2.25.1
From: Niklas Schnelle <[email protected]>
commit f058599e22d59e594e5aae1dc10560568d8f4a8b upstream.
The s390_mmio_read/write syscalls are currently broken when running with
MIO.
The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed
similiarly to normal load/store instructions and do address translation
in the current address space. That means inside the kernel they are
aware of mappings into kernel address space while outside the kernel
they use user space mappings (usually created through mmap'ing a PCI
device file).
Now when existing user space applications use the s390_pci_mmio_write
and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped
into user space so as to be usable with the new instructions without
needing a syscall. Accessing these addresses with the old instructions
as done currently leads to a kernel panic.
Also, for such a user space mapping there may not exist an equivalent
kernel space mapping which means we can't just use the new instructions
in kernel space.
Instead of replicating user mappings in the kernel which then might
collide with other mappings, we can conceptually execute the new
instructions as if executed by the user space application using the
secondary address space. This even allows us to directly store to the
user pointer without the need for copy_to/from_user().
Cc: [email protected]
Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")
Signed-off-by: Niklas Schnelle <[email protected]>
Reviewed-by: Sven Schnelle <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/include/asm/pci_io.h | 10 +
arch/s390/pci/pci_mmio.c | 213 ++++++++++++++++++++++++++++++++++++++++-
2 files changed, 219 insertions(+), 4 deletions(-)
--- a/arch/s390/include/asm/pci_io.h
+++ b/arch/s390/include/asm/pci_io.h
@@ -8,6 +8,10 @@
#include <linux/slab.h>
#include <asm/pci_insn.h>
+/* I/O size constraints */
+#define ZPCI_MAX_READ_SIZE 8
+#define ZPCI_MAX_WRITE_SIZE 128
+
/* I/O Map */
#define ZPCI_IOMAP_SHIFT 48
#define ZPCI_IOMAP_ADDR_BASE 0x8000000000000000UL
@@ -140,7 +144,8 @@ static inline int zpci_memcpy_fromio(voi
while (n > 0) {
size = zpci_get_max_write_size((u64 __force) src,
- (u64) dst, n, 8);
+ (u64) dst, n,
+ ZPCI_MAX_READ_SIZE);
rc = zpci_read_single(dst, src, size);
if (rc)
break;
@@ -161,7 +166,8 @@ static inline int zpci_memcpy_toio(volat
while (n > 0) {
size = zpci_get_max_write_size((u64 __force) dst,
- (u64) src, n, 128);
+ (u64) src, n,
+ ZPCI_MAX_WRITE_SIZE);
if (size > 8) /* main path */
rc = zpci_write_block(dst, src, size);
else
--- a/arch/s390/pci/pci_mmio.c
+++ b/arch/s390/pci/pci_mmio.c
@@ -11,6 +11,113 @@
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/pci.h>
+#include <asm/pci_io.h>
+#include <asm/pci_debug.h>
+
+static inline void zpci_err_mmio(u8 cc, u8 status, u64 offset)
+{
+ struct {
+ u64 offset;
+ u8 cc;
+ u8 status;
+ } data = {offset, cc, status};
+
+ zpci_err_hex(&data, sizeof(data));
+}
+
+static inline int __pcistb_mio_inuser(
+ void __iomem *ioaddr, const void __user *src,
+ u64 len, u8 *status)
+{
+ int cc = -ENXIO;
+
+ asm volatile (
+ " sacf 256\n"
+ "0: .insn rsy,0xeb00000000d4,%[len],%[ioaddr],%[src]\n"
+ "1: ipm %[cc]\n"
+ " srl %[cc],28\n"
+ "2: sacf 768\n"
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
+ : [cc] "+d" (cc), [len] "+d" (len)
+ : [ioaddr] "a" (ioaddr), [src] "Q" (*((u8 __force *)src))
+ : "cc", "memory");
+ *status = len >> 24 & 0xff;
+ return cc;
+}
+
+static inline int __pcistg_mio_inuser(
+ void __iomem *ioaddr, const void __user *src,
+ u64 ulen, u8 *status)
+{
+ register u64 addr asm("2") = (u64 __force) ioaddr;
+ register u64 len asm("3") = ulen;
+ int cc = -ENXIO;
+ u64 val = 0;
+ u64 cnt = ulen;
+ u8 tmp;
+
+ /*
+ * copy 0 < @len <= 8 bytes from @src into the right most bytes of
+ * a register, then store it to PCI at @ioaddr while in secondary
+ * address space. pcistg then uses the user mappings.
+ */
+ asm volatile (
+ " sacf 256\n"
+ "0: llgc %[tmp],0(%[src])\n"
+ " sllg %[val],%[val],8\n"
+ " aghi %[src],1\n"
+ " ogr %[val],%[tmp]\n"
+ " brctg %[cnt],0b\n"
+ "1: .insn rre,0xb9d40000,%[val],%[ioaddr]\n"
+ "2: ipm %[cc]\n"
+ " srl %[cc],28\n"
+ "3: sacf 768\n"
+ EX_TABLE(0b, 3b) EX_TABLE(1b, 3b) EX_TABLE(2b, 3b)
+ :
+ [src] "+a" (src), [cnt] "+d" (cnt),
+ [val] "+d" (val), [tmp] "=d" (tmp),
+ [len] "+d" (len), [cc] "+d" (cc),
+ [ioaddr] "+a" (addr)
+ :: "cc", "memory");
+ *status = len >> 24 & 0xff;
+
+ /* did we read everything from user memory? */
+ if (!cc && cnt != 0)
+ cc = -EFAULT;
+
+ return cc;
+}
+
+static inline int __memcpy_toio_inuser(void __iomem *dst,
+ const void __user *src, size_t n)
+{
+ int size, rc = 0;
+ u8 status = 0;
+ mm_segment_t old_fs;
+
+ if (!src)
+ return -EINVAL;
+
+ old_fs = enable_sacf_uaccess();
+ while (n > 0) {
+ size = zpci_get_max_write_size((u64 __force) dst,
+ (u64 __force) src, n,
+ ZPCI_MAX_WRITE_SIZE);
+ if (size > 8) /* main path */
+ rc = __pcistb_mio_inuser(dst, src, size, &status);
+ else
+ rc = __pcistg_mio_inuser(dst, src, size, &status);
+ if (rc)
+ break;
+ src += size;
+ dst += size;
+ n -= size;
+ }
+ disable_sacf_uaccess(old_fs);
+ if (rc)
+ zpci_err_mmio(rc, status, (__force u64) dst);
+ return rc;
+}
static long get_pfn(unsigned long user_addr, unsigned long access,
unsigned long *pfn)
@@ -46,6 +153,20 @@ SYSCALL_DEFINE3(s390_pci_mmio_write, uns
if (length <= 0 || PAGE_SIZE - (mmio_addr & ~PAGE_MASK) < length)
return -EINVAL;
+
+ /*
+ * Only support read access to MIO capable devices on a MIO enabled
+ * system. Otherwise we would have to check for every address if it is
+ * a special ZPCI_ADDR and we would have to do a get_pfn() which we
+ * don't need for MIO capable devices.
+ */
+ if (static_branch_likely(&have_mio)) {
+ ret = __memcpy_toio_inuser((void __iomem *) mmio_addr,
+ user_buffer,
+ length);
+ return ret;
+ }
+
if (length > 64) {
buf = kmalloc(length, GFP_KERNEL);
if (!buf)
@@ -56,7 +177,8 @@ SYSCALL_DEFINE3(s390_pci_mmio_write, uns
ret = get_pfn(mmio_addr, VM_WRITE, &pfn);
if (ret)
goto out;
- io_addr = (void __iomem *)((pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK));
+ io_addr = (void __iomem *)((pfn << PAGE_SHIFT) |
+ (mmio_addr & ~PAGE_MASK));
ret = -EFAULT;
if ((unsigned long) io_addr < ZPCI_IOMAP_ADDR_BASE)
@@ -72,6 +194,78 @@ out:
return ret;
}
+static inline int __pcilg_mio_inuser(
+ void __user *dst, const void __iomem *ioaddr,
+ u64 ulen, u8 *status)
+{
+ register u64 addr asm("2") = (u64 __force) ioaddr;
+ register u64 len asm("3") = ulen;
+ u64 cnt = ulen;
+ int shift = ulen * 8;
+ int cc = -ENXIO;
+ u64 val, tmp;
+
+ /*
+ * read 0 < @len <= 8 bytes from the PCI memory mapped at @ioaddr (in
+ * user space) into a register using pcilg then store these bytes at
+ * user address @dst
+ */
+ asm volatile (
+ " sacf 256\n"
+ "0: .insn rre,0xb9d60000,%[val],%[ioaddr]\n"
+ "1: ipm %[cc]\n"
+ " srl %[cc],28\n"
+ " ltr %[cc],%[cc]\n"
+ " jne 4f\n"
+ "2: ahi %[shift],-8\n"
+ " srlg %[tmp],%[val],0(%[shift])\n"
+ "3: stc %[tmp],0(%[dst])\n"
+ " aghi %[dst],1\n"
+ " brctg %[cnt],2b\n"
+ "4: sacf 768\n"
+ EX_TABLE(0b, 4b) EX_TABLE(1b, 4b) EX_TABLE(3b, 4b)
+ :
+ [cc] "+d" (cc), [val] "=d" (val), [len] "+d" (len),
+ [dst] "+a" (dst), [cnt] "+d" (cnt), [tmp] "=d" (tmp),
+ [shift] "+d" (shift)
+ :
+ [ioaddr] "a" (addr)
+ : "cc", "memory");
+
+ /* did we write everything to the user space buffer? */
+ if (!cc && cnt != 0)
+ cc = -EFAULT;
+
+ *status = len >> 24 & 0xff;
+ return cc;
+}
+
+static inline int __memcpy_fromio_inuser(void __user *dst,
+ const void __iomem *src,
+ unsigned long n)
+{
+ int size, rc = 0;
+ u8 status;
+ mm_segment_t old_fs;
+
+ old_fs = enable_sacf_uaccess();
+ while (n > 0) {
+ size = zpci_get_max_write_size((u64 __force) src,
+ (u64 __force) dst, n,
+ ZPCI_MAX_READ_SIZE);
+ rc = __pcilg_mio_inuser(dst, src, size, &status);
+ if (rc)
+ break;
+ src += size;
+ dst += size;
+ n -= size;
+ }
+ disable_sacf_uaccess(old_fs);
+ if (rc)
+ zpci_err_mmio(rc, status, (__force u64) dst);
+ return rc;
+}
+
SYSCALL_DEFINE3(s390_pci_mmio_read, unsigned long, mmio_addr,
void __user *, user_buffer, size_t, length)
{
@@ -86,12 +280,27 @@ SYSCALL_DEFINE3(s390_pci_mmio_read, unsi
if (length <= 0 || PAGE_SIZE - (mmio_addr & ~PAGE_MASK) < length)
return -EINVAL;
+
+ /*
+ * Only support write access to MIO capable devices on a MIO enabled
+ * system. Otherwise we would have to check for every address if it is
+ * a special ZPCI_ADDR and we would have to do a get_pfn() which we
+ * don't need for MIO capable devices.
+ */
+ if (static_branch_likely(&have_mio)) {
+ ret = __memcpy_fromio_inuser(
+ user_buffer, (const void __iomem *)mmio_addr,
+ length);
+ return ret;
+ }
+
if (length > 64) {
buf = kmalloc(length, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- } else
+ } else {
buf = local_buf;
+ }
ret = get_pfn(mmio_addr, VM_READ, &pfn);
if (ret)
From: Sagar Shrikant Kadam <[email protected]>
commit 17b4efdf4e4867079012a48ca10d965fe9d68822 upstream.
An uninitialised spin lock for sifive serial console raises a bad
magic spin_lock error as reported and discussed here [1].
Initialising the spin lock resolves the issue.
The fix is tested on HiFive Unleashed A00 board with Linux 5.7-rc4
and OpenSBI v0.7
[1] https://lore.kernel.org/linux-riscv/[email protected]
Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART")
Reported-by: Atish Patra <[email protected]>
Signed-off-by: Sagar Shrikant Kadam <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/sifive.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -840,6 +840,7 @@ console_initcall(sifive_console_init);
static void __ssp_add_console_port(struct sifive_serial_port *ssp)
{
+ spin_lock_init(&ssp->port.lock);
sifive_serial_console_ports[ssp->port.line] = ssp;
}
From: Christophe JAILLET <[email protected]>
commit aad4742fbf0a560c25827adb58695a4497ffc204 upstream.
A call to 'vf610_dac_exit()' is missing in an error handling path.
Fixes: 1b983bf42fad ("iio: dac: vf610_dac: Add IIO DAC driver for Vybrid SoC")
Signed-off-by: Christophe JAILLET <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/dac/vf610_dac.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/dac/vf610_dac.c
+++ b/drivers/iio/dac/vf610_dac.c
@@ -225,6 +225,7 @@ static int vf610_dac_probe(struct platfo
return 0;
error_iio_device_register:
+ vf610_dac_exit(info);
clk_disable_unprepare(info->clk);
return ret;
From: Oscar Carter <[email protected]>
commit 34625c1931f8204c234c532b446b9f53c69f4b68 upstream.
In the "gb_tty_set_termios" function the "newline" variable is declared
but not initialized. So the "flow_control" member is not initialized and
the OR / AND operations with itself results in an undefined value in
this member.
The purpose of the code is to set the flow control type, so remove the
OR / AND self operator and set the value directly.
Addresses-Coverity-ID: 1374016 ("Uninitialized scalar variable")
Fixes: e55c25206d5c9 ("greybus: uart: Handle CRTSCTS flag in termios")
Signed-off-by: Oscar Carter <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/greybus/uart.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -537,9 +537,9 @@ static void gb_tty_set_termios(struct tt
}
if (C_CRTSCTS(tty) && C_BAUD(tty) != B0)
- newline.flow_control |= GB_SERIAL_AUTO_RTSCTS_EN;
+ newline.flow_control = GB_SERIAL_AUTO_RTSCTS_EN;
else
- newline.flow_control &= ~GB_SERIAL_AUTO_RTSCTS_EN;
+ newline.flow_control = 0;
if (memcmp(&gb_tty->line_coding, &newline, sizeof(newline))) {
memcpy(&gb_tty->line_coding, &newline, sizeof(newline));
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit c05b9d7b9f3ece2831e4e4829f10e904df296df8 ]
The official name is "R-Car M3-N", not "R-Car M3N".
Fixes: 4e8c120de9268fc2 ("media: fdp1: Support M3N and E3 platforms")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar_fdp1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c
index cb93a13e1777..97bed45360f0 100644
--- a/drivers/media/platform/rcar_fdp1.c
+++ b/drivers/media/platform/rcar_fdp1.c
@@ -2369,7 +2369,7 @@ static int fdp1_probe(struct platform_device *pdev)
dprintk(fdp1, "FDP1 Version R-Car H3\n");
break;
case FD1_IP_M3N:
- dprintk(fdp1, "FDP1 Version R-Car M3N\n");
+ dprintk(fdp1, "FDP1 Version R-Car M3-N\n");
break;
case FD1_IP_E3:
dprintk(fdp1, "FDP1 Version R-Car E3\n");
--
2.25.1
From: Richard Clark <[email protected]>
[ Upstream commit 6de556c31061e3b9c36546ffaaac5fdb679a2f14 ]
The Aquantia AQC100 controller enables a SFP+ port, so the driver should
configure the media type as '_TYPE_FIBRE' instead of '_TYPE_TP'.
Signed-off-by: Richard Clark <[email protected]>
Cc: Igor Russkikh <[email protected]>
Cc: "David S. Miller" <[email protected]>
Acked-by: Igor Russkikh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
index 74b9f3f1da81..0e8264c0b308 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
@@ -56,7 +56,7 @@ static const struct aq_board_revision_s hw_atl_boards[] = {
{ AQ_DEVICE_ID_D108, AQ_HWREV_2, &hw_atl_ops_b0, &hw_atl_b0_caps_aqc108, },
{ AQ_DEVICE_ID_D109, AQ_HWREV_2, &hw_atl_ops_b0, &hw_atl_b0_caps_aqc109, },
- { AQ_DEVICE_ID_AQC100, AQ_HWREV_ANY, &hw_atl_ops_b1, &hw_atl_b0_caps_aqc107, },
+ { AQ_DEVICE_ID_AQC100, AQ_HWREV_ANY, &hw_atl_ops_b1, &hw_atl_b0_caps_aqc100, },
{ AQ_DEVICE_ID_AQC107, AQ_HWREV_ANY, &hw_atl_ops_b1, &hw_atl_b0_caps_aqc107, },
{ AQ_DEVICE_ID_AQC108, AQ_HWREV_ANY, &hw_atl_ops_b1, &hw_atl_b0_caps_aqc108, },
{ AQ_DEVICE_ID_AQC109, AQ_HWREV_ANY, &hw_atl_ops_b1, &hw_atl_b0_caps_aqc109, },
--
2.25.1
From: Juliet Kim <[email protected]>
[ Upstream commit f9c6cea0b38518741c8dcf26ac056d26ee2fd61d ]
During MTU change, the following events may happen.
Client-driven CRQ initialization fails due to partner’s CRQ closed,
causing client to enqueue a reset task for FATAL_ERROR. Then passive
(server-driven) CRQ initialization succeeds, causing client to
release CRQ and enqueue a reset task for failover. If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.
Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails.
Signed-off-by: Juliet Kim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index e1ab2feeae53..aaa03ce5796f 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2086,7 +2086,8 @@ static void __ibmvnic_reset(struct work_struct *work)
rc = do_hard_reset(adapter, rwi, reset_state);
rtnl_unlock();
}
- } else {
+ } else if (!(rwi->reset_reason == VNIC_RESET_FATAL &&
+ adapter->from_passive_init)) {
rc = do_reset(adapter, rwi, reset_state);
}
kfree(rwi);
--
2.25.1
From: Cristian Ciocaltea <[email protected]>
commit f8f482deb078389b42768b2193e050a81aae137d upstream.
When the kernel is built with lockdep support and the owl-dma driver is
used, the following message is shown:
[ 2.496939] INFO: trying to register non-static key.
[ 2.501889] the code is fine but needs lockdep annotation.
[ 2.507357] turning off the locking correctness validator.
[ 2.512834] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.3+ #15
[ 2.519084] Hardware name: Generic DT based system
[ 2.523878] Workqueue: events_freezable mmc_rescan
[ 2.528681] [<801127f0>] (unwind_backtrace) from [<8010da58>] (show_stack+0x10/0x14)
[ 2.536420] [<8010da58>] (show_stack) from [<8080fbe8>] (dump_stack+0xb4/0xe0)
[ 2.543645] [<8080fbe8>] (dump_stack) from [<8017efa4>] (register_lock_class+0x6f0/0x718)
[ 2.551816] [<8017efa4>] (register_lock_class) from [<8017b7d0>] (__lock_acquire+0x78/0x25f0)
[ 2.560330] [<8017b7d0>] (__lock_acquire) from [<8017e5e4>] (lock_acquire+0xd8/0x1f4)
[ 2.568159] [<8017e5e4>] (lock_acquire) from [<80831fb0>] (_raw_spin_lock_irqsave+0x3c/0x50)
[ 2.576589] [<80831fb0>] (_raw_spin_lock_irqsave) from [<8051b5fc>] (owl_dma_issue_pending+0xbc/0x120)
[ 2.585884] [<8051b5fc>] (owl_dma_issue_pending) from [<80668cbc>] (owl_mmc_request+0x1b0/0x390)
[ 2.594655] [<80668cbc>] (owl_mmc_request) from [<80650ce0>] (mmc_start_request+0x94/0xbc)
[ 2.602906] [<80650ce0>] (mmc_start_request) from [<80650ec0>] (mmc_wait_for_req+0x64/0xd0)
[ 2.611245] [<80650ec0>] (mmc_wait_for_req) from [<8065aa10>] (mmc_app_send_scr+0x10c/0x144)
[ 2.619669] [<8065aa10>] (mmc_app_send_scr) from [<80659b3c>] (mmc_sd_setup_card+0x4c/0x318)
[ 2.628092] [<80659b3c>] (mmc_sd_setup_card) from [<80659f0c>] (mmc_sd_init_card+0x104/0x430)
[ 2.636601] [<80659f0c>] (mmc_sd_init_card) from [<8065a3e0>] (mmc_attach_sd+0xcc/0x16c)
[ 2.644678] [<8065a3e0>] (mmc_attach_sd) from [<8065301c>] (mmc_rescan+0x3ac/0x40c)
[ 2.652332] [<8065301c>] (mmc_rescan) from [<80143244>] (process_one_work+0x2d8/0x780)
[ 2.660239] [<80143244>] (process_one_work) from [<80143730>] (worker_thread+0x44/0x598)
[ 2.668323] [<80143730>] (worker_thread) from [<8014b5f8>] (kthread+0x148/0x150)
[ 2.675708] [<8014b5f8>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
[ 2.682912] Exception stack(0xee8fdfb0 to 0xee8fdff8)
[ 2.687954] dfa0: 00000000 00000000 00000000 00000000
[ 2.696118] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.704277] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
The obvious fix would be to use 'spin_lock_init()' on 'pchan->lock'
before attempting to call 'spin_lock_irqsave()' in 'owl_dma_get_pchan()'.
However, according to Manivannan Sadhasivam, 'pchan->lock' was supposed
to only protect 'pchan->vchan' while 'od->lock' does a similar job in
'owl_dma_terminate_pchan()'.
Therefore, this patch substitutes 'pchan->lock' with 'od->lock' and
removes the 'lock' attribute in 'owl_dma_pchan' struct.
Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Cristian Ciocaltea <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Acked-by: Andreas Färber <[email protected]>
Link: https://lore.kernel.org/r/c6e6cdaca252b5364bd294093673951036488cf0.1588439073.git.cristian.ciocaltea@gmail.com
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/owl-dma.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/dma/owl-dma.c
+++ b/drivers/dma/owl-dma.c
@@ -175,13 +175,11 @@ struct owl_dma_txd {
* @id: physical index to this channel
* @base: virtual memory base for the dma channel
* @vchan: the virtual channel currently being served by this physical channel
- * @lock: a lock to use when altering an instance of this struct
*/
struct owl_dma_pchan {
u32 id;
void __iomem *base;
struct owl_dma_vchan *vchan;
- spinlock_t lock;
};
/**
@@ -437,14 +435,14 @@ static struct owl_dma_pchan *owl_dma_get
for (i = 0; i < od->nr_pchans; i++) {
pchan = &od->pchans[i];
- spin_lock_irqsave(&pchan->lock, flags);
+ spin_lock_irqsave(&od->lock, flags);
if (!pchan->vchan) {
pchan->vchan = vchan;
- spin_unlock_irqrestore(&pchan->lock, flags);
+ spin_unlock_irqrestore(&od->lock, flags);
break;
}
- spin_unlock_irqrestore(&pchan->lock, flags);
+ spin_unlock_irqrestore(&od->lock, flags);
}
return pchan;
From: Xiyu Yang <[email protected]>
commit c6b39f070722ea9963ffe756bfe94e89218c5e63 upstream.
policy_update() invokes begin_current_label_crit_section(), which
returns a reference of the updated aa_label object to "label" with
increased refcount.
When policy_update() returns, "label" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
policy_update(). When aa_may_manage_policy() returns not NULL, the
refcnt increased by begin_current_label_crit_section() is not decreased,
causing a refcnt leak.
Fix this issue by jumping to "end_section" label when
aa_may_manage_policy() returns not NULL.
Fixes: 5ac8c355ae00 ("apparmor: allow introspecting the loaded policy pre internal transform")
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: John Johansen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/apparmor/apparmorfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/security/apparmor/apparmorfs.c
+++ b/security/apparmor/apparmorfs.c
@@ -424,7 +424,7 @@ static ssize_t policy_update(u32 mask, c
*/
error = aa_may_manage_policy(label, ns, mask);
if (error)
- return error;
+ goto end_section;
data = aa_simple_write_to_buffer(buf, size, size, pos);
error = PTR_ERR(data);
@@ -432,6 +432,7 @@ static ssize_t policy_update(u32 mask, c
error = aa_replace_profiles(ns, label, mask, data);
aa_put_loaddata(data);
}
+end_section:
end_current_label_crit_section(label);
return error;
From: Christian Lachner <[email protected]>
commit d9e8fe0cffbfdd18de96fa68ee2a8b667a0b046e upstream.
The Gigabyte X570 Aorus Xtreme motherboard with ALC1220 codec
requires a similar workaround for Clevo laptops to enforce the
DAC/mixer connection path. Set up a quirk entry for that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2457,6 +2457,7 @@ static const struct snd_pci_quirk alc882
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950),
+ SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1462, 0x1275, "MSI-GL63", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950),
From: Babu Moger <[email protected]>
commit 37486135d3a7b03acc7755b63627a130437f066a upstream.
Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU
resource isn't. It can be read with XSAVE and written with XRSTOR.
So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state),
the guest can read the host value.
In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could
potentially use XRSTOR to change the host PKRU value.
While at it, move pkru state save/restore to common code and the
host_pkru field to kvm_vcpu_arch. This will let SVM support protection keys.
Cc: [email protected]
Reported-by: Jim Mattson <[email protected]>
Signed-off-by: Babu Moger <[email protected]>
Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/vmx/vmx.c | 18 ------------------
arch/x86/kvm/x86.c | 17 +++++++++++++++++
3 files changed, 18 insertions(+), 18 deletions(-)
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -550,6 +550,7 @@ struct kvm_vcpu_arch {
unsigned long cr4;
unsigned long cr4_guest_owned_bits;
unsigned long cr8;
+ u32 host_pkru;
u32 pkru;
u32 hflags;
u64 efer;
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -1360,7 +1360,6 @@ void vmx_vcpu_load(struct kvm_vcpu *vcpu
vmx_vcpu_pi_load(vcpu, cpu);
- vmx->host_pkru = read_pkru();
vmx->host_debugctlmsr = get_debugctlmsr();
}
@@ -6521,11 +6520,6 @@ static void vmx_vcpu_run(struct kvm_vcpu
kvm_load_guest_xcr0(vcpu);
- if (static_cpu_has(X86_FEATURE_PKU) &&
- kvm_read_cr4_bits(vcpu, X86_CR4_PKE) &&
- vcpu->arch.pkru != vmx->host_pkru)
- __write_pkru(vcpu->arch.pkru);
-
pt_guest_enter(vmx);
atomic_switch_perf_msrs(vmx);
@@ -6614,18 +6608,6 @@ static void vmx_vcpu_run(struct kvm_vcpu
pt_guest_exit(vmx);
- /*
- * eager fpu is enabled if PKEY is supported and CR4 is switched
- * back on host, so it is safe to read guest PKRU from current
- * XSAVE.
- */
- if (static_cpu_has(X86_FEATURE_PKU) &&
- kvm_read_cr4_bits(vcpu, X86_CR4_PKE)) {
- vcpu->arch.pkru = rdpkru();
- if (vcpu->arch.pkru != vmx->host_pkru)
- __write_pkru(vmx->host_pkru);
- }
-
kvm_put_guest_xcr0(vcpu);
vmx->nested.nested_run_pending = 0;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -832,11 +832,25 @@ void kvm_load_guest_xcr0(struct kvm_vcpu
xsetbv(XCR_XFEATURE_ENABLED_MASK, vcpu->arch.xcr0);
vcpu->guest_xcr0_loaded = 1;
}
+
+ if (static_cpu_has(X86_FEATURE_PKU) &&
+ (kvm_read_cr4_bits(vcpu, X86_CR4_PKE) ||
+ (vcpu->arch.xcr0 & XFEATURE_MASK_PKRU)) &&
+ vcpu->arch.pkru != vcpu->arch.host_pkru)
+ __write_pkru(vcpu->arch.pkru);
}
EXPORT_SYMBOL_GPL(kvm_load_guest_xcr0);
void kvm_put_guest_xcr0(struct kvm_vcpu *vcpu)
{
+ if (static_cpu_has(X86_FEATURE_PKU) &&
+ (kvm_read_cr4_bits(vcpu, X86_CR4_PKE) ||
+ (vcpu->arch.xcr0 & XFEATURE_MASK_PKRU))) {
+ vcpu->arch.pkru = rdpkru();
+ if (vcpu->arch.pkru != vcpu->arch.host_pkru)
+ __write_pkru(vcpu->arch.host_pkru);
+ }
+
if (vcpu->guest_xcr0_loaded) {
if (vcpu->arch.xcr0 != host_xcr0)
xsetbv(XCR_XFEATURE_ENABLED_MASK, host_xcr0);
@@ -8222,6 +8236,9 @@ static int vcpu_enter_guest(struct kvm_v
trace_kvm_entry(vcpu->vcpu_id);
guest_enter_irqoff();
+ /* Save host pkru register if supported */
+ vcpu->arch.host_pkru = read_pkru();
+
fpregs_assert_state_consistent();
if (test_thread_flag(TIF_NEED_FPU_LOAD))
switch_fpu_return();
From: Kailang Yang <[email protected]>
[ Upstream commit 431e76c3edd76d84a0ed1eb81a286b2ddecc5ee4 ]
HP Note Book supported new mute Led.
Hardware PIN was not enough to meet old LED rule.
JD2 to control playback mute led.
GPO3 to control capture mute led.
(ALC285 didn't control GPO3 via verb command)
This two PIN just could control by COEF registers.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 81 +++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 499c8150ebb8..16f548cdf290 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -86,6 +86,14 @@ struct alc_spec {
unsigned int gpio_mute_led_mask;
unsigned int gpio_mic_led_mask;
+ unsigned int mute_led_coef_idx;
+ unsigned int mute_led_coefbit_mask;
+ unsigned int mute_led_coefbit_on;
+ unsigned int mute_led_coefbit_off;
+ unsigned int mic_led_coef_idx;
+ unsigned int mic_led_coefbit_mask;
+ unsigned int mic_led_coefbit_on;
+ unsigned int mic_led_coefbit_off;
hda_nid_t headset_mic_pin;
hda_nid_t headphone_mic_pin;
@@ -4182,6 +4190,73 @@ static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
}
}
+/* update mute-LED according to the speaker mute state via COEF bit */
+static void alc_fixup_mute_led_coefbit_hook(void *private_data, int enabled)
+{
+ struct hda_codec *codec = private_data;
+ struct alc_spec *spec = codec->spec;
+
+ if (spec->mute_led_polarity)
+ enabled = !enabled;
+
+ /* temporarily power up/down for setting COEF bit */
+ enabled ? alc_update_coef_idx(codec, spec->mute_led_coef_idx,
+ spec->mute_led_coefbit_mask, spec->mute_led_coefbit_off) :
+ alc_update_coef_idx(codec, spec->mute_led_coef_idx,
+ spec->mute_led_coefbit_mask, spec->mute_led_coefbit_on);
+}
+
+static void alc285_fixup_hp_mute_led_coefbit(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->mute_led_polarity = 0;
+ spec->mute_led_coef_idx = 0x0b;
+ spec->mute_led_coefbit_mask = 1<<3;
+ spec->mute_led_coefbit_on = 1<<3;
+ spec->mute_led_coefbit_off = 0;
+ spec->gen.vmaster_mute.hook = alc_fixup_mute_led_coefbit_hook;
+ spec->gen.vmaster_mute_enum = 1;
+ }
+}
+
+/* turn on/off mic-mute LED per capture hook by coef bit */
+static void alc_hp_cap_micmute_update(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (spec->gen.micmute_led.led_value)
+ alc_update_coef_idx(codec, spec->mic_led_coef_idx,
+ spec->mic_led_coefbit_mask, spec->mic_led_coefbit_on);
+ else
+ alc_update_coef_idx(codec, spec->mic_led_coef_idx,
+ spec->mic_led_coefbit_mask, spec->mic_led_coefbit_off);
+}
+
+static void alc285_fixup_hp_coef_micmute_led(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->mic_led_coef_idx = 0x19;
+ spec->mic_led_coefbit_mask = 1<<13;
+ spec->mic_led_coefbit_on = 1<<13;
+ spec->mic_led_coefbit_off = 0;
+ snd_hda_gen_add_micmute_led(codec, alc_hp_cap_micmute_update);
+ }
+}
+
+static void alc285_fixup_hp_mute_led(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ alc285_fixup_hp_mute_led_coefbit(codec, fix, action);
+ alc285_fixup_hp_coef_micmute_led(codec, fix, action);
+}
+
#if IS_REACHABLE(CONFIG_INPUT)
static void gpio2_mic_hotkey_event(struct hda_codec *codec,
struct hda_jack_callback *event)
@@ -5980,6 +6055,7 @@ enum {
ALC294_FIXUP_ASUS_HPE,
ALC294_FIXUP_ASUS_COEF_1B,
ALC285_FIXUP_HP_GPIO_LED,
+ ALC285_FIXUP_HP_MUTE_LED,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -7128,6 +7204,10 @@ static const struct hda_fixup alc269_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_hp_gpio_led,
},
+ [ALC285_FIXUP_HP_MUTE_LED] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc285_fixup_hp_mute_led,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -7273,6 +7353,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_LED),
+ SND_PCI_QUIRK(0x103c, 0x877a, "HP", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300),
SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
--
2.25.1
From: Josh Poimboeuf <[email protected]>
commit 187b96db5ca79423618dfa29a05c438c34f9e1f0 upstream.
Normally, show_trace_log_lvl() scans the stack, looking for text
addresses to print. In parallel, it unwinds the stack with
unwind_next_frame(). If the stack address matches the pointer returned
by unwind_get_return_address_ptr() for the current frame, the text
address is printed normally without a question mark. Otherwise it's
considered a breadcrumb (potentially from a previous call path) and it's
printed with a question mark to indicate that the address is unreliable
and typically can be ignored.
Since the following commit:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
... for inactive tasks, show_trace_log_lvl() prints *only* unreliable
addresses (prepended with '?').
That happens because, for the first frame of an inactive task,
unwind_get_return_address_ptr() returns the wrong return address
pointer: one word *below* the task stack pointer. show_trace_log_lvl()
starts scanning at the stack pointer itself, so it never finds the first
'reliable' address, causing only guesses to being printed.
The first frame of an inactive task isn't a normal stack frame. It's
actually just an instance of 'struct inactive_task_frame' which is left
behind by __switch_to_asm(). Now that this inactive frame is actually
exposed to callers, fix unwind_get_return_address_ptr() to interpret it
properly.
Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Reported-by: Tetsuo Handa <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/unwind_orc.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -311,12 +311,19 @@ EXPORT_SYMBOL_GPL(unwind_get_return_addr
unsigned long *unwind_get_return_address_ptr(struct unwind_state *state)
{
+ struct task_struct *task = state->task;
+
if (unwind_done(state))
return NULL;
if (state->regs)
return &state->regs->ip;
+ if (task != current && state->sp == task->thread.sp) {
+ struct inactive_task_frame *frame = (void *)task->thread.sp;
+ return &frame->ret_addr;
+ }
+
if (state->sp)
return (unsigned long *)state->sp - 1;
From: Vincent Guittot <[email protected]>
[ Upstream commit 6d4d22468dae3d8757af9f8b81b848a76ef4409d ]
The walk through the cgroup hierarchy during the enqueue/dequeue of a task
is split in 2 distinct parts for throttled cfs_rq without any added value
but making code less readable.
Change the code ordering such that everything related to a cfs_rq
(throttled or not) will be done in the same loop.
In addition, the same steps ordering is used when updating a cfs_rq:
- update_load_avg
- update_cfs_group
- update *h_nr_running
This reordering enables the use of h_nr_running in PELT algorithm.
No functional and performance changes are expected and have been noticed
during tests.
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: "Dietmar Eggemann <[email protected]>"
Acked-by: Peter Zijlstra <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Valentin Schneider <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Hillf Danton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 42 ++++++++++++++++++++----------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index eeaf34d65742..0e042e847ed3 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5232,32 +5232,31 @@ enqueue_task_fair(struct rq *rq, struct task_struct *p, int flags)
cfs_rq = cfs_rq_of(se);
enqueue_entity(cfs_rq, se, flags);
- /*
- * end evaluation on encountering a throttled cfs_rq
- *
- * note: in the case of encountering a throttled cfs_rq we will
- * post the final h_nr_running increment below.
- */
- if (cfs_rq_throttled(cfs_rq))
- break;
cfs_rq->h_nr_running++;
cfs_rq->idle_h_nr_running += idle_h_nr_running;
+ /* end evaluation on encountering a throttled cfs_rq */
+ if (cfs_rq_throttled(cfs_rq))
+ goto enqueue_throttle;
+
flags = ENQUEUE_WAKEUP;
}
for_each_sched_entity(se) {
cfs_rq = cfs_rq_of(se);
- cfs_rq->h_nr_running++;
- cfs_rq->idle_h_nr_running += idle_h_nr_running;
+ /* end evaluation on encountering a throttled cfs_rq */
if (cfs_rq_throttled(cfs_rq))
- break;
+ goto enqueue_throttle;
update_load_avg(cfs_rq, se, UPDATE_TG);
update_cfs_group(se);
+
+ cfs_rq->h_nr_running++;
+ cfs_rq->idle_h_nr_running += idle_h_nr_running;
}
+enqueue_throttle:
if (!se) {
add_nr_running(rq, 1);
/*
@@ -5317,17 +5316,13 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int flags)
cfs_rq = cfs_rq_of(se);
dequeue_entity(cfs_rq, se, flags);
- /*
- * end evaluation on encountering a throttled cfs_rq
- *
- * note: in the case of encountering a throttled cfs_rq we will
- * post the final h_nr_running decrement below.
- */
- if (cfs_rq_throttled(cfs_rq))
- break;
cfs_rq->h_nr_running--;
cfs_rq->idle_h_nr_running -= idle_h_nr_running;
+ /* end evaluation on encountering a throttled cfs_rq */
+ if (cfs_rq_throttled(cfs_rq))
+ goto dequeue_throttle;
+
/* Don't dequeue parent if it has other entities besides us */
if (cfs_rq->load.weight) {
/* Avoid re-evaluating load for this entity: */
@@ -5345,16 +5340,19 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int flags)
for_each_sched_entity(se) {
cfs_rq = cfs_rq_of(se);
- cfs_rq->h_nr_running--;
- cfs_rq->idle_h_nr_running -= idle_h_nr_running;
+ /* end evaluation on encountering a throttled cfs_rq */
if (cfs_rq_throttled(cfs_rq))
- break;
+ goto dequeue_throttle;
update_load_avg(cfs_rq, se, UPDATE_TG);
update_cfs_group(se);
+
+ cfs_rq->h_nr_running--;
+ cfs_rq->idle_h_nr_running -= idle_h_nr_running;
}
+dequeue_throttle:
if (!se)
sub_nr_running(rq, 1);
--
2.25.1
From: Wu Bo <[email protected]>
[ Upstream commit 4d8e28ff3106b093d98bfd2eceb9b430c70a8758 ]
If the ceph_mdsc_open_export_target_session() return fails, it will
do a "goto retry", but the session mutex has already been unlocked.
Re-lock the mutex in that case to ensure that we don't unlock it
twice.
Signed-off-by: Wu Bo <[email protected]>
Reviewed-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/caps.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 703945cce0e5..2d602c2b0ff6 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -3693,6 +3693,7 @@ retry:
WARN_ON(1);
tsession = NULL;
target = -1;
+ mutex_lock(&session->s_mutex);
}
goto retry;
--
2.25.1
From: Alan Stern <[email protected]>
[ Upstream commit ac854131d9844f79e2fdcef67a7707227538d78a ]
The syzbot fuzzer found a race between URB submission to endpoint 0
and device reset. Namely, during the reset we call usb_ep0_reinit()
because the characteristics of ep0 may have changed (if the reset
follows a firmware update, for example). While usb_ep0_reinit() is
running there is a brief period during which the pointers stored in
udev->ep_in[0] and udev->ep_out[0] are set to NULL, and if an URB is
submitted to ep0 during that period, usb_urb_ep_type_check() will
report it as a driver bug. In the absence of those pointers, the
routine thinks that the endpoint doesn't exist. The log message looks
like this:
------------[ cut here ]------------
usb 2-1: BOGUS urb xfer, pipe 2 != type 2
WARNING: CPU: 0 PID: 9241 at drivers/usb/core/urb.c:478
usb_submit_urb+0x1188/0x1460 drivers/usb/core/urb.c:478
Now, although submitting an URB while the device is being reset is a
questionable thing to do, it shouldn't count as a driver bug as severe
as submitting an URB for an endpoint that doesn't exist. Indeed,
endpoint 0 always exists, even while the device is in its unconfigured
state.
To prevent these misleading driver bug reports, this patch updates
usb_disable_endpoint() to avoid clearing the ep_in[] and ep_out[]
pointers when the endpoint being disabled is ep0. There's no danger
of leaving a stale pointer in place, because the usb_host_endpoint
structure being pointed to is stored permanently in udev->ep0; it
doesn't get deallocated until the entire usb_device structure does.
Reported-and-tested-by: [email protected]
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/message.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 02eaac7e1e34..a1ac2f0723b0 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1143,11 +1143,11 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
if (usb_endpoint_out(epaddr)) {
ep = dev->ep_out[epnum];
- if (reset_hardware)
+ if (reset_hardware && epnum != 0)
dev->ep_out[epnum] = NULL;
} else {
ep = dev->ep_in[epnum];
- if (reset_hardware)
+ if (reset_hardware && epnum != 0)
dev->ep_in[epnum] = NULL;
}
if (ep) {
--
2.25.1
From: Roberto Sassu <[email protected]>
[ Upstream commit 0014cc04e8ec077dc482f00c87dfd949cfe2b98f ]
Commit a408e4a86b36 ("ima: open a new file instance if no read
permissions") tries to create a new file descriptor to calculate a file
digest if the file has not been opened with O_RDONLY flag. However, if a
new file descriptor cannot be obtained, it sets the FMODE_READ flag to
file->f_flags instead of file->f_mode.
This patch fixes this issue by replacing f_flags with f_mode as it was
before that commit.
Cc: [email protected] # 4.20.x
Fixes: a408e4a86b36 ("ima: open a new file instance if no read permissions")
Signed-off-by: Roberto Sassu <[email protected]>
Reviewed-by: Goldwyn Rodrigues <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/integrity/ima/ima_crypto.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 73044fc6a952..ad6cbbccc8d9 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -411,7 +411,7 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
loff_t i_size;
int rc;
struct file *f = file;
- bool new_file_instance = false, modified_flags = false;
+ bool new_file_instance = false, modified_mode = false;
/*
* For consistency, fail file's opened with the O_DIRECT flag on
@@ -431,13 +431,13 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
f = dentry_open(&file->f_path, flags, file->f_cred);
if (IS_ERR(f)) {
/*
- * Cannot open the file again, lets modify f_flags
+ * Cannot open the file again, lets modify f_mode
* of original and continue
*/
pr_info_ratelimited("Unable to reopen file for reading.\n");
f = file;
- f->f_flags |= FMODE_READ;
- modified_flags = true;
+ f->f_mode |= FMODE_READ;
+ modified_mode = true;
} else {
new_file_instance = true;
}
@@ -455,8 +455,8 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
out:
if (new_file_instance)
fput(f);
- else if (modified_flags)
- f->f_flags &= ~FMODE_READ;
+ else if (modified_mode)
+ f->f_mode &= ~FMODE_READ;
return rc;
}
--
2.25.1
From: Thomas Gleixner <[email protected]>
[ Upstream commit c84cb3735fd53c91101ccdb191f2e3331a9262cb ]
Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a
lockdep splat due to a lock order violation between hrtimer_base::lock and
console_sem, when the 'once' condition is reset via
/sys/kernel/debug/clear_warn_once after boot.
The initial printk cannot trigger this because that happens during boot
when the local APIC timer is set up on the boot CPU.
Prevent it by moving the printk to a place which is guaranteed to be only
called once during boot.
Mark the deadline timer check related functions and data __init while at
it.
Reported-by: Leon Romanovsky <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/apic/apic.c | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index df891f874614..25b8c45467fc 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -352,8 +352,6 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
* According to Intel, MFENCE can do the serialization here.
*/
asm volatile("mfence" : : : "memory");
-
- printk_once(KERN_DEBUG "TSC deadline timer enabled\n");
return;
}
@@ -552,7 +550,7 @@ static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
#define DEADLINE_MODEL_MATCH_REV(model, rev) \
{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, (unsigned long)rev }
-static u32 hsx_deadline_rev(void)
+static __init u32 hsx_deadline_rev(void)
{
switch (boot_cpu_data.x86_stepping) {
case 0x02: return 0x3a; /* EP */
@@ -562,7 +560,7 @@ static u32 hsx_deadline_rev(void)
return ~0U;
}
-static u32 bdx_deadline_rev(void)
+static __init u32 bdx_deadline_rev(void)
{
switch (boot_cpu_data.x86_stepping) {
case 0x02: return 0x00000011;
@@ -574,7 +572,7 @@ static u32 bdx_deadline_rev(void)
return ~0U;
}
-static u32 skx_deadline_rev(void)
+static __init u32 skx_deadline_rev(void)
{
switch (boot_cpu_data.x86_stepping) {
case 0x03: return 0x01000136;
@@ -587,7 +585,7 @@ static u32 skx_deadline_rev(void)
return ~0U;
}
-static const struct x86_cpu_id deadline_match[] = {
+static const struct x86_cpu_id deadline_match[] __initconst = {
DEADLINE_MODEL_MATCH_FUNC( INTEL_FAM6_HASWELL_X, hsx_deadline_rev),
DEADLINE_MODEL_MATCH_REV ( INTEL_FAM6_BROADWELL_X, 0x0b000020),
DEADLINE_MODEL_MATCH_FUNC( INTEL_FAM6_BROADWELL_D, bdx_deadline_rev),
@@ -609,18 +607,19 @@ static const struct x86_cpu_id deadline_match[] = {
{},
};
-static void apic_check_deadline_errata(void)
+static __init bool apic_validate_deadline_timer(void)
{
const struct x86_cpu_id *m;
u32 rev;
- if (!boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER) ||
- boot_cpu_has(X86_FEATURE_HYPERVISOR))
- return;
+ if (!boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER))
+ return false;
+ if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
+ return true;
m = x86_match_cpu(deadline_match);
if (!m)
- return;
+ return true;
/*
* Function pointers will have the MSB set due to address layout,
@@ -632,11 +631,12 @@ static void apic_check_deadline_errata(void)
rev = (u32)m->driver_data;
if (boot_cpu_data.microcode >= rev)
- return;
+ return true;
setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
pr_err(FW_BUG "TSC_DEADLINE disabled due to Errata; "
"please update microcode to version: 0x%x (or later)\n", rev);
+ return false;
}
/*
@@ -2098,7 +2098,8 @@ void __init init_apic_mappings(void)
{
unsigned int new_apicid;
- apic_check_deadline_errata();
+ if (apic_validate_deadline_timer())
+ pr_debug("TSC deadline timer available\n");
if (x2apic_mode) {
boot_cpu_physical_apicid = read_apic_id();
--
2.25.1
From: Jiri Kosina <[email protected]>
[ Upstream commit 185af3e775b693f773d9a4b5a8c3cda69fc8ca0f ]
HID_DEVICE_ID_ALPS_1657 PID is too specific, as there are many other
ALPS hardware IDs using this particular touchpad.
Rename the identifier to HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY in order
to describe reality better.
Fixes: 640e403b1fd24 ("HID: alps: Add AUI1657 device ID")
Reported-by: Xiaojian Cao <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-alps.c | 2 +-
drivers/hid/hid-ids.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index c2a2bd528890..b2ad319a74b9 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -802,7 +802,7 @@ static int alps_probe(struct hid_device *hdev, const struct hid_device_id *id)
break;
case HID_DEVICE_ID_ALPS_U1_DUAL:
case HID_DEVICE_ID_ALPS_U1:
- case HID_DEVICE_ID_ALPS_1657:
+ case HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY:
data->dev_type = U1;
break;
default:
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index cc2b6f497f53..48eba9c4f39a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -79,9 +79,9 @@
#define HID_DEVICE_ID_ALPS_U1_DUAL_PTP 0x121F
#define HID_DEVICE_ID_ALPS_U1_DUAL_3BTN_PTP 0x1220
#define HID_DEVICE_ID_ALPS_U1 0x1215
+#define HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY 0x121E
#define HID_DEVICE_ID_ALPS_T4_BTNLESS 0x120C
#define HID_DEVICE_ID_ALPS_1222 0x1222
-#define HID_DEVICE_ID_ALPS_1657 0x121E
#define USB_VENDOR_ID_AMI 0x046b
#define USB_DEVICE_ID_AMI_VIRT_KEYBOARD_AND_MOUSE 0xff10
--
2.25.1
From: Arun Easi <[email protected]>
[ Upstream commit 45a76264c26fd8cfd0c9746196892d9b7e2657ee ]
In NPIV environment, a NPIV host may use a queue pair created by base host
or other NPIVs, so the check for a queue pair created by this NPIV is not
correct, and can cause an abort to fail, which in turn means the NVME
command not returned. This leads to hang in nvme_fc layer in
nvme_fc_delete_association() which waits for all I/Os to be returned, which
is seen as hang in the application.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Arun Easi <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 1ef8907314e5..62a16463f025 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3117,7 +3117,7 @@ qla24xx_abort_command(srb_t *sp)
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x108c,
"Entered %s.\n", __func__);
- if (vha->flags.qpairs_available && sp->qpair)
+ if (sp->qpair)
req = sp->qpair->req;
else
return QLA_FUNCTION_FAILED;
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit e9d1a0a41d4486955e96552293c1fcf1fce61602 ]
A call to 'i2c_demux_deactivate_master()' is missing in the error handling
path, as already done in the remove function.
Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/muxes/i2c-demux-pinctrl.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 0e16490eb3a1..5365199a31f4 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -272,6 +272,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
err_rollback_available:
device_remove_file(&pdev->dev, &dev_attr_available_masters);
err_rollback:
+ i2c_demux_deactivate_master(priv);
for (j = 0; j < i; j++) {
of_node_put(priv->chan[j].parent_np);
of_changeset_destroy(&priv->chan[j].chgset);
--
2.25.1
From: Richard Weinberger <[email protected]>
[ Upstream commit 0e7572cffe442290c347e779bf8bd4306bb0aa7c ]
3bfa7e141b0b ("fs/seq_file.c: seq_read(): add info message about buggy .next functions")
showed that we don't use seq_file correctly.
So make sure that our ->next function always updates the position.
Fixes: 7bccd12d27b7 ("ubi: Add debugfs file for tracking PEB state")
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/ubi/debug.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index a1dff92ceedf..8a83072401a7 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -392,9 +392,6 @@ static void *eraseblk_count_seq_start(struct seq_file *s, loff_t *pos)
{
struct ubi_device *ubi = s->private;
- if (*pos == 0)
- return SEQ_START_TOKEN;
-
if (*pos < ubi->peb_count)
return pos;
@@ -408,8 +405,6 @@ static void *eraseblk_count_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
struct ubi_device *ubi = s->private;
- if (v == SEQ_START_TOKEN)
- return pos;
(*pos)++;
if (*pos < ubi->peb_count)
@@ -431,11 +426,8 @@ static int eraseblk_count_seq_show(struct seq_file *s, void *iter)
int err;
/* If this is the start, print a header */
- if (iter == SEQ_START_TOKEN) {
- seq_puts(s,
- "physical_block_number\terase_count\tblock_status\tread_status\n");
- return 0;
- }
+ if (*block_number == 0)
+ seq_puts(s, "physical_block_number\terase_count\n");
err = ubi_io_is_bad(ubi, *block_number);
if (err)
--
2.25.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 8433856947217ebb5697a8ff9c4c9cad4639a2cf ]
The IS_ERR_OR_NULL() function has two conditions and if we got really
unlucky we could hit a race where "ptr" started as an error pointer and
then was set to NULL. Both conditions would be false even though the
pointer at the end was NULL.
This patch fixes the problem by ensuring that "*tfm" can only be NULL
or valid. I have introduced a "tmp_tfm" variable to make that work. I
also reversed a condition and pulled the code in one tab.
Reported-by: Roberto Sassu <[email protected]>
Fixes: 53de3b080d5e ("evm: Check also if *tfm is an error pointer in init_desc()")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Roberto Sassu <[email protected]>
Acked-by: Krzysztof Struczynski <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/integrity/evm/evm_crypto.c | 44 ++++++++++++++---------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c
index 302adeb2d37b..cc826c2767a3 100644
--- a/security/integrity/evm/evm_crypto.c
+++ b/security/integrity/evm/evm_crypto.c
@@ -75,7 +75,7 @@ static struct shash_desc *init_desc(char type, uint8_t hash_algo)
{
long rc;
const char *algo;
- struct crypto_shash **tfm;
+ struct crypto_shash **tfm, *tmp_tfm;
struct shash_desc *desc;
if (type == EVM_XATTR_HMAC) {
@@ -93,31 +93,31 @@ static struct shash_desc *init_desc(char type, uint8_t hash_algo)
algo = hash_algo_name[hash_algo];
}
- if (IS_ERR_OR_NULL(*tfm)) {
- mutex_lock(&mutex);
- if (*tfm)
- goto out;
- *tfm = crypto_alloc_shash(algo, 0, CRYPTO_NOLOAD);
- if (IS_ERR(*tfm)) {
- rc = PTR_ERR(*tfm);
- pr_err("Can not allocate %s (reason: %ld)\n", algo, rc);
- *tfm = NULL;
+ if (*tfm)
+ goto alloc;
+ mutex_lock(&mutex);
+ if (*tfm)
+ goto unlock;
+
+ tmp_tfm = crypto_alloc_shash(algo, 0, CRYPTO_NOLOAD);
+ if (IS_ERR(tmp_tfm)) {
+ pr_err("Can not allocate %s (reason: %ld)\n", algo,
+ PTR_ERR(tmp_tfm));
+ mutex_unlock(&mutex);
+ return ERR_CAST(tmp_tfm);
+ }
+ if (type == EVM_XATTR_HMAC) {
+ rc = crypto_shash_setkey(tmp_tfm, evmkey, evmkey_len);
+ if (rc) {
+ crypto_free_shash(tmp_tfm);
mutex_unlock(&mutex);
return ERR_PTR(rc);
}
- if (type == EVM_XATTR_HMAC) {
- rc = crypto_shash_setkey(*tfm, evmkey, evmkey_len);
- if (rc) {
- crypto_free_shash(*tfm);
- *tfm = NULL;
- mutex_unlock(&mutex);
- return ERR_PTR(rc);
- }
- }
-out:
- mutex_unlock(&mutex);
}
-
+ *tfm = tmp_tfm;
+unlock:
+ mutex_unlock(&mutex);
+alloc:
desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(*tfm),
GFP_KERNEL);
if (!desc)
--
2.25.1
From: Ricardo Ribalda Delgado <[email protected]>
[ Upstream commit 7b01b7239d0dc9832e0d0d23605c1ff047422a2c ]
When the nvmem framework is enabled, a nvmem device is created per mtd
device/partition.
It is not uncommon that a device can have multiple mtd devices with
partitions that have the same name. Eg, when there DT overlay is allowed
and the same device with mtd is attached twice.
Under that circumstances, the mtd fails to register due to a name
duplication on the nvmem framework.
With this patch we use the mtdX name instead of the partition name,
which is unique.
[ 8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data'
[ 8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13
[ 8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019
[ 8.948994] Call Trace:
[ 8.948996] dump_stack+0x50/0x70
[ 8.948998] sysfs_warn_dup.cold+0x17/0x2d
[ 8.949000] sysfs_do_create_link_sd.isra.0+0xc2/0xd0
[ 8.949002] bus_add_device+0x74/0x140
[ 8.949004] device_add+0x34b/0x850
[ 8.949006] nvmem_register.part.0+0x1bf/0x640
...
[ 8.948926] mtd mtd8: Failed to register NVMEM device
Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API")
Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/mtdcore.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 6cc7ecb0c788..036b9452b19f 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -563,7 +563,7 @@ static int mtd_nvmem_add(struct mtd_info *mtd)
config.id = -1;
config.dev = &mtd->dev;
- config.name = mtd->name;
+ config.name = dev_name(&mtd->dev);
config.owner = THIS_MODULE;
config.reg_read = mtd_nvmem_reg_read;
config.size = mtd->size;
--
2.25.1
From: Alexander Monakov <[email protected]>
[ Upstream commit e461b8c991b9202b007ea2059d953e264240b0c9 ]
IVRS parsing code always tries to read 255 bytes from memory when
retrieving ACPI device path, and makes an assumption that firmware
provides a zero-terminated string. Both of those are bugs: the entry
is likely to be shorter than 255 bytes, and zero-termination is not
guaranteed.
With Acer SF314-42 firmware these issues manifest visibly in dmesg:
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3>\x83e\x8d\x9a\xd1...
The first three lines show how the code over-reads adjacent table
entries into the UID, and in the last line it even reads garbage data
beyond the end of the IVRS table itself.
Since each entry has the length of the UID (uidl member of ivhd_entry
struct), use that for memcpy, and manually add a zero terminator.
Avoid zero-filling hid and uid arrays up front, and instead ensure
the uid array is always zero-terminated. No change needed for the hid
array, as it was already properly zero-terminated.
Fixes: 2a0cb4e2d423c ("iommu/amd: Add new map for storing IVHD dev entry type HID")
Signed-off-by: Alexander Monakov <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd_iommu_init.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index ef14b00fa94b..135ae5222cf3 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1331,8 +1331,8 @@ static int __init init_iommu_from_acpi(struct amd_iommu *iommu,
}
case IVHD_DEV_ACPI_HID: {
u16 devid;
- u8 hid[ACPIHID_HID_LEN] = {0};
- u8 uid[ACPIHID_UID_LEN] = {0};
+ u8 hid[ACPIHID_HID_LEN];
+ u8 uid[ACPIHID_UID_LEN];
int ret;
if (h->type != 0x40) {
@@ -1349,6 +1349,7 @@ static int __init init_iommu_from_acpi(struct amd_iommu *iommu,
break;
}
+ uid[0] = '\0';
switch (e->uidf) {
case UID_NOT_PRESENT:
@@ -1363,8 +1364,8 @@ static int __init init_iommu_from_acpi(struct amd_iommu *iommu,
break;
case UID_IS_CHARACTER:
- memcpy(uid, (u8 *)(&e->uid), ACPIHID_UID_LEN - 1);
- uid[ACPIHID_UID_LEN - 1] = '\0';
+ memcpy(uid, &e->uid, e->uidl);
+ uid[e->uidl] = '\0';
break;
default:
--
2.25.1
From: Jian-Hong Pan <[email protected]>
[ Upstream commit ad97d667854c2fbce05a004e107f358ef4b04cf6 ]
The ASUS laptop UX550GE with ALC295 can't detect the headset microphone
until ALC295_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Jian-Hong Pan <[email protected]>
Signed-off-by: Daniel Drake <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index bc2352a3baba..1efaeb09ec3f 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8082,6 +8082,10 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = {
{0x12, 0x90a60130},
{0x17, 0x90170110},
{0x21, 0x03211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0295, 0x1043, "ASUS", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
+ {0x12, 0x90a60120},
+ {0x17, 0x90170110},
+ {0x21, 0x04211030}),
SND_HDA_PIN_QUIRK(0x10ec0295, 0x1043, "ASUS", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
{0x12, 0x90a60130},
{0x17, 0x90170110},
--
2.25.1
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 8a71821f12a010d7100f9cc1f7b218aff0313c4a ]
GCC reports the following warning with W=1
sound/pci/hda/patch_realtek.c: In function ‘alc269_suspend’:
sound/pci/hda/patch_realtek.c:3616:29: warning: suggest braces around
empty body in an ‘if’ statement [-Wempty-body]
3616 | alc5505_dsp_suspend(codec);
| ^
sound/pci/hda/patch_realtek.c: In function ‘alc269_resume’:
sound/pci/hda/patch_realtek.c:3651:28: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
3651 | alc5505_dsp_resume(codec);
| ^
This is a classic macro problem and can indeed lead to bad program
flows.
Fix by using the usual "do { } while (0)" pattern
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 151099b8c394..a0e7d711cbb5 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3719,8 +3719,8 @@ static void alc5505_dsp_init(struct hda_codec *codec)
}
#ifdef HALT_REALTEK_ALC5505
-#define alc5505_dsp_suspend(codec) /* NOP */
-#define alc5505_dsp_resume(codec) /* NOP */
+#define alc5505_dsp_suspend(codec) do { } while (0) /* NOP */
+#define alc5505_dsp_resume(codec) do { } while (0) /* NOP */
#else
#define alc5505_dsp_suspend(codec) alc5505_dsp_halt(codec)
#define alc5505_dsp_resume(codec) alc5505_dsp_back_from_halt(codec)
--
2.25.1
From: Thomas Gleixner <[email protected]>
[ Upstream commit 8101b5a1531f3390b3a69fa7934c70a8fd6566ad ]
Stephen reported the following build warning on a ARM multi_v7_defconfig
build with GCC 9.2.1:
kernel/futex.c: In function 'do_futex':
kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
1676 | return oldval == cmparg;
| ~~~~~~~^~~~~~~~~
kernel/futex.c:1652:6: note: 'oldval' was declared here
1652 | int oldval, ret;
| ^~~~~~
introduced by commit a08971e9488d ("futex: arch_futex_atomic_op_inuser()
calling conventions change").
While that change should not make any difference it confuses GCC which
fails to work out that oldval is not referenced when the return value is
not zero.
GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the
early return, the issue is with the assembly macros. GCC fails to detect
that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT
which makes oldval uninteresting. The store to the callsite supplied oldval
pointer is conditional on ret == 0.
The straight forward way to solve this is to make the store unconditional.
Aside of addressing the build warning this makes sense anyway because it
removes the conditional from the fastpath. In the error case the stored
value is uninteresting and the extra store does not matter at all.
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/include/asm/futex.h | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 83c391b597d4..fdc4ae3e7378 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -164,8 +164,13 @@ arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
preempt_enable();
#endif
- if (!ret)
- *oval = oldval;
+ /*
+ * Store unconditionally. If ret != 0 the extra store is the least
+ * of the worries but GCC cannot figure out that __futex_atomic_op()
+ * is either setting ret to -EFAULT or storing the old value in
+ * oldval which results in a uninitialized warning at the call site.
+ */
+ *oval = oldval;
return ret;
}
--
2.25.1
From: Roberto Sassu <[email protected]>
[ Upstream commit 53de3b080d5eae31d0de219617155dcc34e7d698 ]
This patch avoids a kernel panic due to accessing an error pointer set by
crypto_alloc_shash(). It occurs especially when there are many files that
require an unsupported algorithm, as it would increase the likelihood of
the following race condition:
Task A: *tfm = crypto_alloc_shash() <= error pointer
Task B: if (*tfm == NULL) <= *tfm is not NULL, use it
Task B: rc = crypto_shash_init(desc) <= panic
Task A: *tfm = NULL
This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new
crypto context must be created.
Cc: [email protected]
Fixes: d46eb3699502b ("evm: crypto hash replaced by shash")
Co-developed-by: Krzysztof Struczynski <[email protected]>
Signed-off-by: Krzysztof Struczynski <[email protected]>
Signed-off-by: Roberto Sassu <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/integrity/evm/evm_crypto.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c
index d485f6fc908e..302adeb2d37b 100644
--- a/security/integrity/evm/evm_crypto.c
+++ b/security/integrity/evm/evm_crypto.c
@@ -93,7 +93,7 @@ static struct shash_desc *init_desc(char type, uint8_t hash_algo)
algo = hash_algo_name[hash_algo];
}
- if (*tfm == NULL) {
+ if (IS_ERR_OR_NULL(*tfm)) {
mutex_lock(&mutex);
if (*tfm)
goto out;
--
2.25.1
From: Brent Lu <[email protected]>
commit e7513c5786f8b33f0c107b3759e433bc6cbb2efa upstream.
There is a corner case that ALSA keeps increasing the hw_ptr but DMA
already stop working/updating the position for a long time.
In following log we can see the position returned from DMA driver does
not move at all but the hw_ptr got increased at some point of time so
snd_pcm_avail() will return a large number which seems to be a buffer
underrun event from user space program point of view. The program
thinks there is space in the buffer and fill more data.
[ 418.510086] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 418.510149] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6910 avail 9554
...
[ 418.681052] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15102 avail 1362
[ 418.681130] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
[ 418.726515] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 16464 avail 16368
This is because the hw_base will be increased by runtime->buffer_size
frames unconditionally if the hw_ptr is not updated for over half of
buffer time. As the hw_base increases, so does the hw_ptr increased
by the same number.
The avail value returned from snd_pcm_avail() could exceed the limit
(buffer_size) easily becase the hw_ptr itself got increased by same
buffer_size samples when the corner case happens. In following log,
the buffer_size is 16368 samples but the avail is 21810 samples so
CRAS server complains about it.
[ 418.851755] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 27390 avail 5442
[ 418.926491] sound pcmC0D5p: pos 96 hw_ptr 32832 appl_ptr 27390 avail 21810
cras_server[1907]: pcm_avail returned frames larger than buf_size:
sof-glkda7219max: :0,5: 21810 > 16368
By updating runtime->hw_ptr_jiffies each time the HWSYNC is called,
the hw_base will keep the same when buffer stall happens at long as
the interval between each HWSYNC call is shorter than half of buffer
time.
Following is a log captured by a patched kernel. The hw_base/hw_ptr
value is fixed in this corner case and user space program should be
aware of the buffer stall and handle it.
[ 293.525543] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 293.525606] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6880 avail 9584
[ 293.525975] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 10976 avail 5488
[ 293.611178] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15072 avail 1392
[ 293.696429] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
...
[ 381.139517] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
Signed-off-by: Brent Lu <[email protected]>
Reviewed-by: Jaroslav Kysela <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/pcm_lib.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -423,6 +423,7 @@ static int snd_pcm_update_hw_ptr0(struct
no_delta_check:
if (runtime->status->hw_ptr == new_hw_ptr) {
+ runtime->hw_ptr_jiffies = curr_jiffies;
update_audio_tstamp(substream, &curr_tstamp, &audio_tstamp);
return 0;
}
From: Christophe JAILLET <[email protected]>
commit 3a5fd0dbd87853f8bd2ea275a5b3b41d6686e761 upstream.
Commit b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
has moved some code in the probe function and reordered the error handling
path accordingly.
However, a goto has been missed.
Fix it and goto the right label if 'dma_async_device_register()' fails, so
that all resources are released.
Fixes: b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/tegra210-adma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -900,7 +900,7 @@ static int tegra_adma_probe(struct platf
ret = dma_async_device_register(&tdma->dma_dev);
if (ret < 0) {
dev_err(&pdev->dev, "ADMA registration failed: %d\n", ret);
- goto irq_dispose;
+ goto rpm_put;
}
ret = of_dma_controller_register(pdev->dev.of_node,
From: Daniel Borkmann <[email protected]>
[ Upstream commit e1608f3fa857b600045b6df7f7dadc70eeaa4496 ]
For the case where the interpreter is compiled out or when the prog is jited
it is completely unnecessary to set the BPF insn pages as read-only. In fact,
on frequent churn of BPF programs, it could lead to performance degradation of
the system over time since it would break the direct map down to 4k pages when
calling set_memory_ro() for the insn buffer on x86-64 / arm64 and there is no
reverse operation. Thus, avoid breaking up large pages for data maps, and only
limit this to the module range used by the JIT where it is necessary to set
the image read-only and executable.
Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/filter.h | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 0367a75f873b..3bbc72dbc69e 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -770,8 +770,12 @@ bpf_ctx_narrow_access_offset(u32 off, u32 size, u32 size_default)
static inline void bpf_prog_lock_ro(struct bpf_prog *fp)
{
- set_vm_flush_reset_perms(fp);
- set_memory_ro((unsigned long)fp, fp->pages);
+#ifndef CONFIG_BPF_JIT_ALWAYS_ON
+ if (!fp->jited) {
+ set_vm_flush_reset_perms(fp);
+ set_memory_ro((unsigned long)fp, fp->pages);
+ }
+#endif
}
static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr)
--
2.25.1
From: Chris Chiu <[email protected]>
[ Upstream commit 9e43342b464f1de570a3ad8256ac77645749ef45 ]
The ASUS laptop GL503VM with ALC295 can't detect the headset microphone.
The headset microphone does not work until pin 0x19 is enabled for it.
Signed-off-by: Chris Chiu <[email protected]>
Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Jian-Hong Pan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 736ddab16512..bc2352a3baba 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6096,6 +6096,7 @@ enum {
ALC285_FIXUP_HP_MUTE_LED,
ALC236_FIXUP_HP_MUTE_LED,
ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
+ ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -7259,6 +7260,15 @@ static const struct hda_fixup alc269_fixups[] = {
{ }
},
},
+ [ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC269_FIXUP_HEADSET_MODE
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8072,6 +8082,14 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = {
{0x12, 0x90a60130},
{0x17, 0x90170110},
{0x21, 0x03211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0295, 0x1043, "ASUS", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
+ {0x12, 0x90a60130},
+ {0x17, 0x90170110},
+ {0x21, 0x03211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0295, 0x1043, "ASUS", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
+ {0x12, 0x90a60130},
+ {0x17, 0x90170110},
+ {0x21, 0x03211020}),
SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
{0x14, 0x90170110},
{0x21, 0x04211020}),
--
2.25.1
From: Alan Maguire <[email protected]>
[ Upstream commit b730d668138cb3dd9ce78f8003986d1adae5523a ]
Currently, ftracetest will return 1 (failure) if any unresolved cases
are encountered. The unresolved status results from modules and
programs not being available, and as such does not indicate any
issues with ftrace itself. As such, change the behaviour of
ftracetest in line with unsupported cases; if unsupported cases
happen, ftracetest still returns 0 unless --fail-unsupported. Here
--fail-unresolved is added and the default is to return 0 if
unresolved results occur.
Signed-off-by: Alan Maguire <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/ftrace/ftracetest | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest
index 144308a757b7..19e9236dec5e 100755
--- a/tools/testing/selftests/ftrace/ftracetest
+++ b/tools/testing/selftests/ftrace/ftracetest
@@ -17,6 +17,7 @@ echo " -v|--verbose Increase verbosity of test messages"
echo " -vv Alias of -v -v (Show all results in stdout)"
echo " -vvv Alias of -v -v -v (Show all commands immediately)"
echo " --fail-unsupported Treat UNSUPPORTED as a failure"
+echo " --fail-unresolved Treat UNRESOLVED as a failure"
echo " -d|--debug Debug mode (trace all shell commands)"
echo " -l|--logdir <dir> Save logs on the <dir>"
echo " If <dir> is -, all logs output in console only"
@@ -112,6 +113,10 @@ parse_opts() { # opts
UNSUPPORTED_RESULT=1
shift 1
;;
+ --fail-unresolved)
+ UNRESOLVED_RESULT=1
+ shift 1
+ ;;
--logdir|-l)
LOG_DIR=$2
shift 2
@@ -176,6 +181,7 @@ KEEP_LOG=0
DEBUG=0
VERBOSE=0
UNSUPPORTED_RESULT=0
+UNRESOLVED_RESULT=0
STOP_FAILURE=0
# Parse command-line options
parse_opts $*
@@ -280,7 +286,7 @@ eval_result() { # sigval
$UNRESOLVED)
prlog " [${color_blue}UNRESOLVED${color_reset}]"
UNRESOLVED_CASES="$UNRESOLVED_CASES $CASENO"
- return 1 # this is a kind of bug.. something happened.
+ return $UNRESOLVED_RESULT # depends on use case
;;
$UNTESTED)
prlog " [${color_blue}UNTESTED${color_reset}]"
--
2.25.1
From: John Hubbard <[email protected]>
commit ffca476a0a8d26de767cc41d62b8ca7f540ecfdd upstream.
In the case of get_user_pages_fast() returning fewer pages than
requested, rio_dma_transfer() does not quite do the right thing. It
attempts to release all the pages that were requested, rather than just
the pages that were pinned.
Fix the error handling so that only the pages that were successfully
pinned are released.
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: John Hubbard <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Alexandre Bounine <[email protected]>
Cc: Sumit Semwal <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rapidio/devices/rio_mport_cdev.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -877,6 +877,11 @@ rio_dma_transfer(struct file *filp, u32
rmcd_error("pinned %ld out of %ld pages",
pinned, nr_pages);
ret = -EFAULT;
+ /*
+ * Set nr_pages up to mean "how many pages to unpin, in
+ * the error handler:
+ */
+ nr_pages = pinned;
goto err_pg;
}
From: Loïc Yhuel <[email protected]>
[ Upstream commit b4f1874c62168159fdb419ced4afc77c1b51c475 ]
This fixes the boot issues since 5.3 on several Dell models when the TPM
is enabled. Depending on the exact grub binary, booting the kernel would
freeze early, or just report an error parsing the final events log.
We get an event log in the SHA-1 format, which doesn't have a
tcg_efi_specid_event_head in the first event, and there is a final events
table which doesn't match the crypto agile format.
__calc_tpm2_event_size reads bad "count" and "efispecid->num_algs", and
either fails, or loops long enough for the machine to be appear frozen.
So we now only parse the final events table, which is per the spec always
supposed to be in the crypto agile format, when we got a event log in this
format.
Fixes: c46f3405692de ("tpm: Reserve the TPM final events table")
Fixes: 166a2809d65b2 ("tpm: Don't duplicate events from the final event log in the TCG2 log")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1779611
Signed-off-by: Loïc Yhuel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Reviewed-by: Matthew Garrett <[email protected]>
[ardb: warn when final events table is missing or in the wrong format]
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/efi/libstub/tpm.c | 5 +++--
drivers/firmware/efi/tpm.c | 5 ++++-
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/efi/libstub/tpm.c b/drivers/firmware/efi/libstub/tpm.c
index eb9af83e4d59..aeeb1b2d8ede 100644
--- a/drivers/firmware/efi/libstub/tpm.c
+++ b/drivers/firmware/efi/libstub/tpm.c
@@ -64,7 +64,7 @@ void efi_retrieve_tpm2_eventlog(efi_system_table_t *sys_table_arg)
efi_status_t status;
efi_physical_addr_t log_location = 0, log_last_entry = 0;
struct linux_efi_tpm_eventlog *log_tbl = NULL;
- struct efi_tcg2_final_events_table *final_events_table;
+ struct efi_tcg2_final_events_table *final_events_table = NULL;
unsigned long first_entry_addr, last_entry_addr;
size_t log_size, last_entry_size;
efi_bool_t truncated;
@@ -140,7 +140,8 @@ void efi_retrieve_tpm2_eventlog(efi_system_table_t *sys_table_arg)
* Figure out whether any events have already been logged to the
* final events structure, and if so how much space they take up
*/
- final_events_table = get_efi_config_table(sys_table_arg,
+ if (version == EFI_TCG2_EVENT_LOG_FORMAT_TCG_2)
+ final_events_table = get_efi_config_table(sys_table_arg,
LINUX_EFI_TPM_FINAL_LOG_GUID);
if (final_events_table && final_events_table->nr_events) {
struct tcg_pcr_event2_head *header;
diff --git a/drivers/firmware/efi/tpm.c b/drivers/firmware/efi/tpm.c
index 55b031d2c989..c1955d320fec 100644
--- a/drivers/firmware/efi/tpm.c
+++ b/drivers/firmware/efi/tpm.c
@@ -62,8 +62,11 @@ int __init efi_tpm_eventlog_init(void)
tbl_size = sizeof(*log_tbl) + log_tbl->size;
memblock_reserve(efi.tpm_log, tbl_size);
- if (efi.tpm_final_log == EFI_INVALID_TABLE_ADDR)
+ if (efi.tpm_final_log == EFI_INVALID_TABLE_ADDR ||
+ log_tbl->version != EFI_TCG2_EVENT_LOG_FORMAT_TCG_2) {
+ pr_warn(FW_BUG "TPM Final Events table missing or invalid\n");
goto out;
+ }
final_tbl = early_memremap(efi.tpm_final_log, sizeof(*final_tbl));
--
2.25.1
From: Peter Ujfalusi <[email protected]>
[ Upstream commit a9ab624edd9186fbad734cfe5d606a6da3ca34db ]
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.
By using dma_request_chan() directly the driver can support deferred
probing against DMA.
Signed-off-by: Peter Ujfalusi <[email protected]>
Acked-by: Olivier Moysan <[email protected]>
Acked-by: Fabrice Gasnier <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/stm32-dfsdm-adc.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 3ae0366a7b58..4a9337a3f9a3 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -1363,9 +1363,13 @@ static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
- adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
- if (!adc->dma_chan)
- return -EINVAL;
+ adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+ if (IS_ERR(adc->dma_chan)) {
+ int ret = PTR_ERR(adc->dma_chan);
+
+ adc->dma_chan = NULL;
+ return ret;
+ }
adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
DFSDM_DMA_BUFFER_SIZE,
@@ -1489,7 +1493,16 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
init_completion(&adc->completion);
/* Optionally request DMA */
- if (stm32_dfsdm_dma_request(indio_dev)) {
+ ret = stm32_dfsdm_dma_request(indio_dev);
+ if (ret) {
+ if (ret != -ENODEV) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&indio_dev->dev,
+ "DMA channel request failed with %d\n",
+ ret);
+ return ret;
+ }
+
dev_dbg(&indio_dev->dev, "No DMA support\n");
return 0;
}
--
2.25.1
From: Jakub Sitnicki <[email protected]>
commit 5cf65922bb15279402e1e19b5ee8c51d618fa51f upstream.
When attaching a flow dissector program to a network namespace with
bpf(BPF_PROG_ATTACH, ...) we grab a reference to bpf_prog.
If netns gets destroyed while a flow dissector is still attached, and there
are no other references to the prog, we leak the reference and the program
remains loaded.
Leak can be reproduced by running flow dissector tests from selftests/bpf:
# bpftool prog list
# ./test_flow_dissector.sh
...
selftests: test_flow_dissector [PASS]
# bpftool prog list
4: flow_dissector name _dissect tag e314084d332a5338 gpl
loaded_at 2020-05-20T18:50:53+0200 uid 0
xlated 552B jited 355B memlock 4096B map_ids 3,4
btf_id 4
#
Fix it by detaching the flow dissector program when netns is going away.
Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/flow_dissector.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -129,12 +129,10 @@ int skb_flow_dissector_bpf_prog_attach(c
return 0;
}
-int skb_flow_dissector_bpf_prog_detach(const union bpf_attr *attr)
+static int flow_dissector_bpf_prog_detach(struct net *net)
{
struct bpf_prog *attached;
- struct net *net;
- net = current->nsproxy->net_ns;
mutex_lock(&flow_dissector_mutex);
attached = rcu_dereference_protected(net->flow_dissector_prog,
lockdep_is_held(&flow_dissector_mutex));
@@ -169,6 +167,24 @@ static __be16 skb_flow_get_be16(const st
return 0;
}
+int skb_flow_dissector_bpf_prog_detach(const union bpf_attr *attr)
+{
+ return flow_dissector_bpf_prog_detach(current->nsproxy->net_ns);
+}
+
+static void __net_exit flow_dissector_pernet_pre_exit(struct net *net)
+{
+ /* We're not racing with attach/detach because there are no
+ * references to netns left when pre_exit gets called.
+ */
+ if (rcu_access_pointer(net->flow_dissector_prog))
+ flow_dissector_bpf_prog_detach(net);
+}
+
+static struct pernet_operations flow_dissector_pernet_ops __net_initdata = {
+ .pre_exit = flow_dissector_pernet_pre_exit,
+};
+
/**
* __skb_flow_get_ports - extract the upper layer ports and return them
* @skb: sk_buff to extract the ports from
@@ -1759,7 +1775,7 @@ static int __init init_default_flow_diss
skb_flow_dissector_init(&flow_keys_basic_dissector,
flow_keys_basic_dissector_keys,
ARRAY_SIZE(flow_keys_basic_dissector_keys));
- return 0;
-}
+ return register_pernet_subsys(&flow_dissector_pernet_ops);
+}
core_initcall(init_default_flow_dissectors);
From: Dragos Bogdan <[email protected]>
commit 5e4f99a6b788047b0b8a7496c2e0c8f372f6edf2 upstream.
If the serial interface is used, the 8-bit address should be latched using
the rising edge of the WR/FSYNC signal.
This basically means that a CS change is required between the first byte
sent, and the second one.
This change splits the single-transfer transfer of 2 bytes into 2 transfers
with a single byte, and CS change in-between.
Note fixes tag is not accurate, but reflects a point beyond which there
are too many refactors to make backporting straight forward.
Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.")
Signed-off-by: Dragos Bogdan <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/resolver/ad2s1210.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -130,17 +130,24 @@ static int ad2s1210_config_write(struct
static int ad2s1210_config_read(struct ad2s1210_state *st,
unsigned char address)
{
- struct spi_transfer xfer = {
- .len = 2,
- .rx_buf = st->rx,
- .tx_buf = st->tx,
+ struct spi_transfer xfers[] = {
+ {
+ .len = 1,
+ .rx_buf = &st->rx[0],
+ .tx_buf = &st->tx[0],
+ .cs_change = 1,
+ }, {
+ .len = 1,
+ .rx_buf = &st->rx[1],
+ .tx_buf = &st->tx[1],
+ },
};
int ret = 0;
ad2s1210_set_mode(MOD_CONFIG, st);
st->tx[0] = address | AD2S1210_MSB_IS_HIGH;
st->tx[1] = AD2S1210_REG_FAULT;
- ret = spi_sync_transfer(st->sdev, &xfer, 1);
+ ret = spi_sync_transfer(st->sdev, xfers, 2);
if (ret < 0)
return ret;
From: Christian Gmeiner <[email protected]>
commit 40b697e256ccdb88aaff424b44b4d300eb8460e8 upstream.
The GC860 has one GPU device which has a 2d and 3d core. In this case
we want to expose perfmon information for both cores.
The driver has one array which contains all possible perfmon domains
with some meta data - doms_meta. Here we can see that for the GC860
two elements of that array are relevant:
doms_3d: is at index 0 in the doms_meta array with 8 perfmon domains
doms_2d: is at index 1 in the doms_meta array with 1 perfmon domain
The userspace driver wants to get a list of all perfmon domains and
their perfmon signals. This is done by iterating over all domains and
their signals. If the userspace driver wants to access the domain with
id 8 the kernel driver fails and returns invalid data from doms_3d with
and invalid offset.
This results in:
Unable to handle kernel paging request at virtual address 00000000
On such a device it is not possible to use the userspace driver at all.
The fix for this off-by-one error is quite simple.
Reported-by: Paul Cercueil <[email protected]>
Tested-by: Paul Cercueil <[email protected]>
Fixes: ed1dd899baa3 ("drm/etnaviv: rework perfmon query infrastructure")
Cc: [email protected]
Signed-off-by: Christian Gmeiner <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/etnaviv/etnaviv_perfmon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
@@ -453,7 +453,7 @@ static const struct etnaviv_pm_domain *p
if (!(gpu->identity.features & meta->feature))
continue;
- if (meta->nr_domains < (index - offset)) {
+ if (index - offset >= meta->nr_domains) {
offset += meta->nr_domains;
continue;
}
From: James Hilliard <[email protected]>
[ Upstream commit 7706b0a76a9697021e2bf395f3f065c18f51043d ]
If a component fails to bind due to -EPROBE_DEFER we should not log an
error as this is not a real failure.
Fixes messages like:
vc4-drm soc:gpu: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517
vc4-drm soc:gpu: master bind failed: -517
Signed-off-by: James Hilliard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/component.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/base/component.c b/drivers/base/component.c
index 1fdbd6ff2058..b9f20ada68b0 100644
--- a/drivers/base/component.c
+++ b/drivers/base/component.c
@@ -257,7 +257,8 @@ static int try_to_bring_up_master(struct master *master,
ret = master->ops->bind(master->dev);
if (ret < 0) {
devres_release_group(master->dev, NULL);
- dev_info(master->dev, "master bind failed: %d\n", ret);
+ if (ret != -EPROBE_DEFER)
+ dev_info(master->dev, "master bind failed: %d\n", ret);
return ret;
}
@@ -611,8 +612,9 @@ static int component_bind(struct component *component, struct master *master,
devres_release_group(component->dev, NULL);
devres_release_group(master->dev, NULL);
- dev_err(master->dev, "failed to bind %s (ops %ps): %d\n",
- dev_name(component->dev), component->ops, ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(master->dev, "failed to bind %s (ops %ps): %d\n",
+ dev_name(component->dev), component->ops, ret);
}
return ret;
--
2.25.1
From: Navid Emamdoost <[email protected]>
commit c54d481d71c6849e044690d3960aaebc730224cc upstream.
In the implementation of aa_audit_rule_init(), when aa_label_parse()
fails the allocated memory for rule is released using
aa_audit_rule_free(). But after this release, the return statement
tries to access the label field of the rule which results in
use-after-free. Before releasing the rule, copy errNo and return it
after release.
Fixes: 52e8c38001d8 ("apparmor: Fix memory leak of rule on error exit path")
Signed-off-by: Navid Emamdoost <[email protected]>
Signed-off-by: John Johansen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/apparmor/audit.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/security/apparmor/audit.c
+++ b/security/apparmor/audit.c
@@ -197,8 +197,9 @@ int aa_audit_rule_init(u32 field, u32 op
rule->label = aa_label_parse(&root_ns->unconfined->label, rulestr,
GFP_KERNEL, true, false);
if (IS_ERR(rule->label)) {
+ int err = PTR_ERR(rule->label);
aa_audit_rule_free(rule);
- return PTR_ERR(rule->label);
+ return err;
}
*vrule = rule;
From: Roberto Sassu <[email protected]>
[ Upstream commit 2e3a34e9f409ebe83d1af7cd2f49fca7af97dfac ]
This patch fixes the return value of ima_write_policy() when a new policy
is directly passed to IMA and the current policy requires appraisal of the
file containing the policy. Currently, if appraisal is not in ENFORCE mode,
ima_write_policy() returns 0 and leads user space applications to an
endless loop. Fix this issue by denying the operation regardless of the
appraisal mode.
Cc: [email protected] # 4.10.x
Fixes: 19f8a84713edc ("ima: measure and appraise the IMA policy itself")
Signed-off-by: Roberto Sassu <[email protected]>
Reviewed-by: Krzysztof Struczynski <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/integrity/ima/ima_fs.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index 2000e8df0301..68571c40d61f 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -340,8 +340,7 @@ static ssize_t ima_write_policy(struct file *file, const char __user *buf,
integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, NULL,
"policy_update", "signed policy required",
1, 0);
- if (ima_appraise & IMA_APPRAISE_ENFORCE)
- result = -EACCES;
+ result = -EACCES;
} else {
result = ima_parse_add_rule(data);
}
--
2.25.1
From: Alain Volmat <[email protected]>
[ Upstream commit 3c3dd56f760da056e821ac177e3ad0de4209a435 ]
In case of the I2C client exposes the flag I2C_CLIENT_HOST_NOTIFY,
pm_runtime_get_sync is called in order to always keep active the
adapter. However later on, pm_runtime_put_sync is never called
within the function in case of an error. This commit add this
error handling.
Fixes: 72bfcee11cf8 ("i2c: Prevent runtime suspend of adapter when Host Notify is required")
Signed-off-by: Alain Volmat <[email protected]>
Reviewed-by: Jarkko Nikula <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/i2c-core-base.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 810a942eaa8e..cc193f2ba5d3 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -338,8 +338,10 @@ static int i2c_device_probe(struct device *dev)
} else if (ACPI_COMPANION(dev)) {
irq = i2c_acpi_get_irq(client);
}
- if (irq == -EPROBE_DEFER)
- return irq;
+ if (irq == -EPROBE_DEFER) {
+ status = irq;
+ goto put_sync_adapter;
+ }
if (irq < 0)
irq = 0;
@@ -353,15 +355,19 @@ static int i2c_device_probe(struct device *dev)
*/
if (!driver->id_table &&
!i2c_acpi_match_device(dev->driver->acpi_match_table, client) &&
- !i2c_of_match_device(dev->driver->of_match_table, client))
- return -ENODEV;
+ !i2c_of_match_device(dev->driver->of_match_table, client)) {
+ status = -ENODEV;
+ goto put_sync_adapter;
+ }
if (client->flags & I2C_CLIENT_WAKE) {
int wakeirq;
wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
- if (wakeirq == -EPROBE_DEFER)
- return wakeirq;
+ if (wakeirq == -EPROBE_DEFER) {
+ status = wakeirq;
+ goto put_sync_adapter;
+ }
device_init_wakeup(&client->dev, true);
@@ -408,6 +414,10 @@ err_detach_pm_domain:
err_clear_wakeup_irq:
dev_pm_clear_wake_irq(&client->dev);
device_init_wakeup(&client->dev, false);
+put_sync_adapter:
+ if (client->flags & I2C_CLIENT_HOST_NOTIFY)
+ pm_runtime_put_sync(&client->adapter->dev);
+
return status;
}
--
2.25.1
From: Stefano Garzarella <[email protected]>
[ Upstream commit 107bc0766b9feb5113074c753735a3f115c2141f ]
We want to deliver packets to monitoring devices before it is
put in the virtqueue, to avoid that replies can appear in the
packet capture before the transmitted packet.
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vhost/vsock.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index 6c089f655707..ca68a27b98ed 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -181,14 +181,14 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
break;
}
- vhost_add_used(vq, head, sizeof(pkt->hdr) + payload_len);
- added = true;
-
- /* Deliver to monitoring devices all correctly transmitted
- * packets.
+ /* Deliver to monitoring devices all packets that we
+ * will transmit.
*/
virtio_transport_deliver_tap_pkt(pkt);
+ vhost_add_used(vq, head, sizeof(pkt->hdr) + payload_len);
+ added = true;
+
pkt->off += payload_len;
total_len += payload_len;
--
2.25.1
From: Miquel Raynal <[email protected]>
[ Upstream commit 3507273d5a4d3c2e46f9d3f9ed9449805f5dff07 ]
This is done by default in the raw NAND core (nand_base.c) but was
missing in the SPI-NAND core. Without these two lines the ecc_strength
and ecc_step_size values are not exported to the user through sysfs.
Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/spi/core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 8dda51bbdd11..0d21c68bfe24 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1049,6 +1049,10 @@ static int spinand_init(struct spinand_device *spinand)
mtd->oobavail = ret;
+ /* Propagate ECC information to mtd_info */
+ mtd->ecc_strength = nand->eccreq.strength;
+ mtd->ecc_step_size = nand->eccreq.step_size;
+
return 0;
err_cleanup_nanddev:
--
2.25.1
From: David Howells <[email protected]>
[ Upstream commit 9d1be4f4dc5ff1c66c86acfd2c35765d9e3776b3 ]
Don't call req->page_done() on each page as we finish filling it with
the data coming from the network. Whilst this might speed up the
application a bit, it's a problem if there's a network failure and the
operation has to be reissued.
If this happens, an oops occurs because afs_readpages_page_done() clears
the pointer to each page it unlocks and when a retry happens, the
pointers to the pages it wants to fill are now NULL (and the pages have
been unlocked anyway).
Instead, wait till the operation completes successfully and only then
release all the pages after clearing any terminal gap (the server can
give us less data than we requested as we're allowed to ask for more
than is available).
KASAN produces a bug like the following, and even without KASAN, it can
oops and panic.
BUG: KASAN: wild-memory-access in _copy_to_iter+0x323/0x5f4
Write of size 1404 at addr 0005088000000000 by task md5sum/5235
CPU: 0 PID: 5235 Comm: md5sum Not tainted 5.7.0-rc3-fscache+ #250
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
memcpy+0x39/0x58
_copy_to_iter+0x323/0x5f4
__skb_datagram_iter+0x89/0x2a6
skb_copy_datagram_iter+0x129/0x135
rxrpc_recvmsg_data.isra.0+0x615/0xd42
rxrpc_kernel_recv_data+0x1e9/0x3ae
afs_extract_data+0x139/0x33a
yfs_deliver_fs_fetch_data64+0x47a/0x91b
afs_deliver_to_call+0x304/0x709
afs_wait_for_call_to_complete+0x1cc/0x4ad
yfs_fs_fetch_data+0x279/0x288
afs_fetch_data+0x1e1/0x38d
afs_readpages+0x593/0x72e
read_pages+0xf5/0x21e
__do_page_cache_readahead+0x128/0x23f
ondemand_readahead+0x36e/0x37f
generic_file_buffered_read+0x234/0x680
new_sync_read+0x109/0x17e
vfs_read+0xe6/0x138
ksys_read+0xd8/0x14d
do_syscall_64+0x6e/0x8a
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes: 196ee9cd2d04 ("afs: Make afs_fs_fetch_data() take a list of pages")
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/fsclient.c | 8 ++++----
fs/afs/yfsclient.c | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index 6805a469d13c..0a4fed9e706b 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -385,8 +385,6 @@ static int afs_deliver_fs_fetch_data(struct afs_call *call)
ASSERTCMP(req->offset, <=, PAGE_SIZE);
if (req->offset == PAGE_SIZE) {
req->offset = 0;
- if (req->page_done)
- req->page_done(req);
req->index++;
if (req->remain > 0)
goto begin_page;
@@ -440,11 +438,13 @@ static int afs_deliver_fs_fetch_data(struct afs_call *call)
if (req->offset < PAGE_SIZE)
zero_user_segment(req->pages[req->index],
req->offset, PAGE_SIZE);
- if (req->page_done)
- req->page_done(req);
req->offset = 0;
}
+ if (req->page_done)
+ for (req->index = 0; req->index < req->nr_pages; req->index++)
+ req->page_done(req);
+
_leave(" = 0 [done]");
return 0;
}
diff --git a/fs/afs/yfsclient.c b/fs/afs/yfsclient.c
index 39230880f372..8af7f093305d 100644
--- a/fs/afs/yfsclient.c
+++ b/fs/afs/yfsclient.c
@@ -497,8 +497,6 @@ static int yfs_deliver_fs_fetch_data64(struct afs_call *call)
ASSERTCMP(req->offset, <=, PAGE_SIZE);
if (req->offset == PAGE_SIZE) {
req->offset = 0;
- if (req->page_done)
- req->page_done(req);
req->index++;
if (req->remain > 0)
goto begin_page;
@@ -556,11 +554,13 @@ static int yfs_deliver_fs_fetch_data64(struct afs_call *call)
if (req->offset < PAGE_SIZE)
zero_user_segment(req->pages[req->index],
req->offset, PAGE_SIZE);
- if (req->page_done)
- req->page_done(req);
req->offset = 0;
}
+ if (req->page_done)
+ for (req->index = 0; req->index < req->nr_pages; req->index++)
+ req->page_done(req);
+
_leave(" = 0 [done]");
return 0;
}
--
2.25.1
On Wed, 27 May 2020 at 00:37, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.43 release.
> There are 111 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 28 May 2020 18:36:22 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.43-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 5.4.43-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 00dd3347ad64830e7d9a5a6bd3036b9537887208
git describe: v5.4.42-112-g00dd3347ad64
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.42-112-g00dd3347ad64
No regressions (compared to build v5.4.42)
No fixes (compared to build v5.4.42)
Ran 31714 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* libgpiod
* linux-log-parser
* ltp-containers-tests
* ltp-fs-tests
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* kselftest/networking
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-hugetlb-tests
* ltp-mm-tests
* ltp-sched-tests
* ltp-syscalls-tests
* network-basic-tests
* v4l2-compliance
* ltp-commands-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-securebits-tests
* perf
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking
--
Linaro LKFT
https://lkft.linaro.org
On 26/05/2020 19:52, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.43 release.
> There are 111 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 28 May 2020 18:36:22 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.43-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.4:
11 builds: 11 pass, 0 fail
26 boots: 26 pass, 0 fail
42 tests: 42 pass, 0 fail
Linux version: 5.4.43-rc1-g3cb79944b65a
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On 5/26/20 11:52 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.43 release.
> There are 111 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 28 May 2020 18:36:22 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 157 pass: 157 fail: 0
Qemu test results:
total: 429 pass: 429 fail: 0
Guenter
On 5/26/20 12:52 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.43 release.
> There are 111 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 28 May 2020 18:36:22 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.43-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah