Add lenovo generic wmi driver to support camera button.
The Camera button is a GPIO device. This driver receives ACPI notifyi
when the camera button is switched on/off. This driver is used in
Lenovo A70, it is a Computer integrated machine.
Signed-off-by: Ai Chao <[email protected]>
---
v6: Modify SW_CAMERA_LENS_COVER to
KEY_CAMERA_ACCESS_ENABLE/KEY_CAMERA_ACCESS_DISABLE.
v5: Remove camera button groups, modify KEY_CAMERA to SW_CAMERA_LENS_COVER.
v4: Remove lenovo_wmi_input_setup, move camera_mode into struct lenovo_wmi_priv.
v3: Remove lenovo_wmi_remove function.
v2: Adjust GPL v2 to GPL, adjust sprintf to sysfs_emit.
drivers/platform/x86/Kconfig | 12 +++
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/lenovo-wmi-camera.c | 98 ++++++++++++++++++++++++
3 files changed, 111 insertions(+)
create mode 100644 drivers/platform/x86/lenovo-wmi-camera.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index bdd302274b9a..9506a455b547 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1001,6 +1001,18 @@ config INSPUR_PLATFORM_PROFILE
To compile this driver as a module, choose M here: the module
will be called inspur-platform-profile.
+config LENOVO_WMI_CAMERA
+ tristate "Lenovo WMI Camera Button driver"
+ depends on ACPI_WMI
+ depends on INPUT
+ help
+ This driver provides support for Lenovo camera button. The Camera
+ button is a GPIO device. This driver receives ACPI notify when the
+ camera button is switched on/off.
+
+ To compile this driver as a module, choose M here: the module
+ will be called lenovo-wmi-camera.
+
source "drivers/platform/x86/x86-android-tablets/Kconfig"
config FW_ATTR_CLASS
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 1de432e8861e..217e94d7c877 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o
obj-$(CONFIG_YOGABOOK) += lenovo-yogabook.o
+obj-$(CONFIG_LENOVO_WMI_CAMERA) += lenovo-wmi-camera.o
# Intel
obj-y += intel/
diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo-wmi-camera.c
new file mode 100644
index 000000000000..fc2af7f48bc0
--- /dev/null
+++ b/drivers/platform/x86/lenovo-wmi-camera.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Lenovo WMI Camera Button Driver
+ *
+ * Author: Ai Chao <[email protected]>
+ * Copyright (C) 2024 KylinSoft Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/wmi.h>
+
+#define WMI_LENOVO_CAMERABUTTON_EVENT_GUID "50C76F1F-D8E4-D895-0A3D-62F4EA400013"
+
+struct lenovo_wmi_priv {
+ struct input_dev *idev;
+ struct device *dev;
+};
+
+enum {
+ SW_CAMERA_OFF = 0,
+ SW_CAMERA_ON = 1,
+};
+
+static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj)
+{
+ struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
+
+ if (obj->type == ACPI_TYPE_BUFFER &&
+ obj->buffer.pointer[0] <= SW_CAMERA_ON) {
+ /* obj->buffer.pointer[0] is camera mode:
+ * 0 camera close
+ * 1 camera open
+ */
+ if (obj->buffer.pointer[0] == SW_CAMERA_ON) {
+ input_report_key(priv->idev, KEY_CAMERA_ACCESS_ENABLE, 1);
+ input_sync(priv->idev);
+ input_report_key(priv->idev, KEY_CAMERA_ACCESS_ENABLE, 0);
+ } else {
+ input_report_key(priv->idev, KEY_CAMERA_ACCESS_DISABLE, 1);
+ input_sync(priv->idev);
+ input_report_key(priv->idev, KEY_CAMERA_ACCESS_DISABLE, 0);
+ }
+ input_sync(priv->idev);
+ } else {
+ dev_dbg(&wdev->dev, "Bad response type %d or Bad camera mode %d\n",
+ obj->type, obj->buffer.pointer[0]);
+ }
+}
+
+static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+ struct lenovo_wmi_priv *priv;
+
+ priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(&wdev->dev, priv);
+
+ priv->idev = devm_input_allocate_device(&wdev->dev);
+ if (!priv->idev)
+ return -ENOMEM;
+
+ priv->idev->name = "Lenovo WMI Camera Button";
+ priv->idev->phys = "wmi/input0";
+ priv->idev->id.bustype = BUS_HOST;
+ priv->idev->dev.parent = &wdev->dev;
+ input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_ENABLE);
+ input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_DISABLE);
+
+ return input_register_device(priv->idev);
+}
+
+static const struct wmi_device_id lenovo_wmi_id_table[] = {
+ { .guid_string = WMI_LENOVO_CAMERABUTTON_EVENT_GUID },
+ { }
+};
+
+static struct wmi_driver lenovo_wmi_driver = {
+ .driver = {
+ .name = "lenovo-wmi-camera",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+ .id_table = lenovo_wmi_id_table,
+ .no_singleton = true,
+ .probe = lenovo_wmi_probe,
+ .notify = lenovo_wmi_notify,
+};
+
+module_wmi_driver(lenovo_wmi_driver);
+
+MODULE_DEVICE_TABLE(wmi, lenovo_wmi_id_table);
+MODULE_AUTHOR("Ai Chao <[email protected]>");
+MODULE_DESCRIPTION("Lenovo WMI Camera Button Driver");
+MODULE_LICENSE("GPL");
--
2.25.1
On 3/12/24 6:13 PM, Ai Chao wrote:
> Add lenovo generic wmi driver to support camera button.
> The Camera button is a GPIO device. This driver receives ACPI notifyi
/s/notifyi / notification.
> when the camera button is switched on/off. This driver is used in
> Lenovo A70, it is a Computer integrated machine.
>
> Signed-off-by: Ai Chao <[email protected]>
> ---
> v6: Modify SW_CAMERA_LENS_COVER to
> KEY_CAMERA_ACCESS_ENABLE/KEY_CAMERA_ACCESS_DISABLE.
> v5: Remove camera button groups, modify KEY_CAMERA to SW_CAMERA_LENS_COVER.
> v4: Remove lenovo_wmi_input_setup, move camera_mode into struct lenovo_wmi_priv.
> v3: Remove lenovo_wmi_remove function.
> v2: Adjust GPL v2 to GPL, adjust sprintf to sysfs_emit.
>
> drivers/platform/x86/Kconfig | 12 +++
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/lenovo-wmi-camera.c | 98 ++++++++++++++++++++++++
> 3 files changed, 111 insertions(+)
> create mode 100644 drivers/platform/x86/lenovo-wmi-camera.c
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index bdd302274b9a..9506a455b547 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1001,6 +1001,18 @@ config INSPUR_PLATFORM_PROFILE
> To compile this driver as a module, choose M here: the module
> will be called inspur-platform-profile.
>
> +config LENOVO_WMI_CAMERA
> + tristate "Lenovo WMI Camera Button driver"
> + depends on ACPI_WMI
> + depends on INPUT
> + help
> + This driver provides support for Lenovo camera button. The Camera
> + button is a GPIO device. This driver receives ACPI notify when the
> + camera button is switched on/off.
Same as above.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called lenovo-wmi-camera.
> +
> source "drivers/platform/x86/x86-android-tablets/Kconfig"
>
> config FW_ATTR_CLASS
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 1de432e8861e..217e94d7c877 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
> obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
> obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o
> obj-$(CONFIG_YOGABOOK) += lenovo-yogabook.o
> +obj-$(CONFIG_LENOVO_WMI_CAMERA) += lenovo-wmi-camera.o
>
> # Intel
> obj-y += intel/
> diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo-wmi-camera.c
> new file mode 100644
> index 000000000000..fc2af7f48bc0
> --- /dev/null
> +++ b/drivers/platform/x86/lenovo-wmi-camera.c
> @@ -0,0 +1,98 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Lenovo WMI Camera Button Driver
> + *
> + * Author: Ai Chao <[email protected]>
> + * Copyright (C) 2024 KylinSoft Corporation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/device.h>
> +#include <linux/input.h>
> +#include <linux/module.h>
> +#include <linux/wmi.h>
> +
> +#define WMI_LENOVO_CAMERABUTTON_EVENT_GUID "50C76F1F-D8E4-D895-0A3D-62F4EA400013"
> +
> +struct lenovo_wmi_priv {
> + struct input_dev *idev;
> + struct device *dev;
It looks like you are not using dev anywhere in the driver
> +};
> +
> +enum {
> + SW_CAMERA_OFF = 0,
> + SW_CAMERA_ON = 1,
> +};
> +
> +static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj)
> +{
> + struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
> +
> + if (obj->type == ACPI_TYPE_BUFFER &&
> + obj->buffer.pointer[0] <= SW_CAMERA_ON) {
> + /* obj->buffer.pointer[0] is camera mode:
> + * 0 camera close
> + * 1 camera open
> + */
> + if (obj->buffer.pointer[0] == SW_CAMERA_ON) {
> + input_report_key(priv->idev, KEY_CAMERA_ACCESS_ENABLE, 1);
> + input_sync(priv->idev);
> + input_report_key(priv->idev, KEY_CAMERA_ACCESS_ENABLE, 0);
> + } else {
> + input_report_key(priv->idev, KEY_CAMERA_ACCESS_DISABLE, 1);
> + input_sync(priv->idev);
> + input_report_key(priv->idev, KEY_CAMERA_ACCESS_DISABLE, 0);
> + }
> + input_sync(priv->idev);
> + } else {
> + dev_dbg(&wdev->dev, "Bad response type %d or Bad camera mode %d\n",
> + obj->type, obj->buffer.pointer[0]);
> + }
> +}
> +
> +static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context)
> +{
> + struct lenovo_wmi_priv *priv;
> +
> + priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&wdev->dev, priv);
> +
> + priv->idev = devm_input_allocate_device(&wdev->dev);
> + if (!priv->idev)
> + return -ENOMEM;
> +
> + priv->idev->name = "Lenovo WMI Camera Button";
> + priv->idev->phys = "wmi/input0";
> + priv->idev->id.bustype = BUS_HOST;
> + priv->idev->dev.parent = &wdev->dev;
> + input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_ENABLE);
> + input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_DISABLE);
> +
> + return input_register_device(priv->idev);
> +}
> +
> +static const struct wmi_device_id lenovo_wmi_id_table[] = {
> + { .guid_string = WMI_LENOVO_CAMERABUTTON_EVENT_GUID },
> + { }
> +};
> +
> +static struct wmi_driver lenovo_wmi_driver = {
> + .driver = {
> + .name = "lenovo-wmi-camera",
> + .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> + },
> + .id_table = lenovo_wmi_id_table,
> + .no_singleton = true,
> + .probe = lenovo_wmi_probe,
> + .notify = lenovo_wmi_notify,
> +};
> +
> +module_wmi_driver(lenovo_wmi_driver);
> +
> +MODULE_DEVICE_TABLE(wmi, lenovo_wmi_id_table);
> +MODULE_AUTHOR("Ai Chao <[email protected]>");
> +MODULE_DESCRIPTION("Lenovo WMI Camera Button Driver");
> +MODULE_LICENSE("GPL");
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
Am 13.03.24 um 02:13 schrieb Ai Chao:
> Add lenovo generic wmi driver to support camera button.
> The Camera button is a GPIO device. This driver receives ACPI notifyi
> when the camera button is switched on/off. This driver is used in
> Lenovo A70, it is a Computer integrated machine.
>
> Signed-off-by: Ai Chao <[email protected]>
> ---
> v6: Modify SW_CAMERA_LENS_COVER to
> KEY_CAMERA_ACCESS_ENABLE/KEY_CAMERA_ACCESS_DISABLE.
> v5: Remove camera button groups, modify KEY_CAMERA to SW_CAMERA_LENS_COVER.
> v4: Remove lenovo_wmi_input_setup, move camera_mode into struct lenovo_wmi_priv.
> v3: Remove lenovo_wmi_remove function.
> v2: Adjust GPL v2 to GPL, adjust sprintf to sysfs_emit.
>
> drivers/platform/x86/Kconfig | 12 +++
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/lenovo-wmi-camera.c | 98 ++++++++++++++++++++++++
> 3 files changed, 111 insertions(+)
> create mode 100644 drivers/platform/x86/lenovo-wmi-camera.c
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index bdd302274b9a..9506a455b547 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1001,6 +1001,18 @@ config INSPUR_PLATFORM_PROFILE
> To compile this driver as a module, choose M here: the module
> will be called inspur-platform-profile.
>
> +config LENOVO_WMI_CAMERA
> + tristate "Lenovo WMI Camera Button driver"
> + depends on ACPI_WMI
> + depends on INPUT
> + help
> + This driver provides support for Lenovo camera button. The Camera
> + button is a GPIO device. This driver receives ACPI notify when the
> + camera button is switched on/off.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called lenovo-wmi-camera.
> +
> source "drivers/platform/x86/x86-android-tablets/Kconfig"
>
> config FW_ATTR_CLASS
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 1de432e8861e..217e94d7c877 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
> obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
> obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o
> obj-$(CONFIG_YOGABOOK) += lenovo-yogabook.o
> +obj-$(CONFIG_LENOVO_WMI_CAMERA) += lenovo-wmi-camera.o
>
> # Intel
> obj-y += intel/
> diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo-wmi-camera.c
> new file mode 100644
> index 000000000000..fc2af7f48bc0
> --- /dev/null
> +++ b/drivers/platform/x86/lenovo-wmi-camera.c
> @@ -0,0 +1,98 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Lenovo WMI Camera Button Driver
> + *
> + * Author: Ai Chao <[email protected]>
> + * Copyright (C) 2024 KylinSoft Corporation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/device.h>
> +#include <linux/input.h>
> +#include <linux/module.h>
> +#include <linux/wmi.h>
> +
> +#define WMI_LENOVO_CAMERABUTTON_EVENT_GUID "50C76F1F-D8E4-D895-0A3D-62F4EA400013"
> +
> +struct lenovo_wmi_priv {
> + struct input_dev *idev;
> + struct device *dev;
Hi,
could it be that dev is unused? If yes, then please drop it from the struct.
> +};
> +
> +enum {
> + SW_CAMERA_OFF = 0,
> + SW_CAMERA_ON = 1,
> +};
> +
> +static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj)
> +{
> + struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
> +
> + if (obj->type == ACPI_TYPE_BUFFER &&
> + obj->buffer.pointer[0] <= SW_CAMERA_ON) {
Please verify that the size of the ACPI buffer is 1.
> + /* obj->buffer.pointer[0] is camera mode:
> + * 0 camera close
> + * 1 camera open
> + */
> + if (obj->buffer.pointer[0] == SW_CAMERA_ON) {
> + input_report_key(priv->idev, KEY_CAMERA_ACCESS_ENABLE, 1);
> + input_sync(priv->idev);
> + input_report_key(priv->idev, KEY_CAMERA_ACCESS_ENABLE, 0);
> + } else {
> + input_report_key(priv->idev, KEY_CAMERA_ACCESS_DISABLE, 1);
> + input_sync(priv->idev);
> + input_report_key(priv->idev, KEY_CAMERA_ACCESS_DISABLE, 0);
> + }
> + input_sync(priv->idev);
> + } else {
> + dev_dbg(&wdev->dev, "Bad response type %d or Bad camera mode %d\n",
> + obj->type, obj->buffer.pointer[0]);
If you receive an ACPI object different to ACPI_TYPE_BUFFER, you cannot access obj->buffer.
Try something like this instead:
u8 camera_mode;
if (obj->type != ACPI_TYPE_BUFFER) {
dev_dbg(&wdev->dev, "Bad response type %u\n", obj->type);
return -ENOMSG;
}
if (obj->buffer.length != 1) {
dev_dbg(&wdev->dev, "Invalid buffer length %u\n", obj->buffer.length);
return -EMSGSIZE;
}
camera_mode = obj->buffer.pointer[0];
if (camera_mode > SW_CAMERA_ON) {
dev_dbg(&wdev->dev, "Unknown camera mode %u\n", camera_mode);
return -EIO;
}
// Handle camera mode here
Other than that, the driver look good.
> + }
> +}
> +
> +static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context)
> +{
> + struct lenovo_wmi_priv *priv;
> +
> + priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&wdev->dev, priv);
> +
> + priv->idev = devm_input_allocate_device(&wdev->dev);
> + if (!priv->idev)
> + return -ENOMEM;
> +
> + priv->idev->name = "Lenovo WMI Camera Button";
> + priv->idev->phys = "wmi/input0";
> + priv->idev->id.bustype = BUS_HOST;
> + priv->idev->dev.parent = &wdev->dev;
> + input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_ENABLE);
> + input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_DISABLE);
> +
> + return input_register_device(priv->idev);
> +}
> +
> +static const struct wmi_device_id lenovo_wmi_id_table[] = {
> + { .guid_string = WMI_LENOVO_CAMERABUTTON_EVENT_GUID },
> + { }
> +};
> +
> +static struct wmi_driver lenovo_wmi_driver = {
> + .driver = {
> + .name = "lenovo-wmi-camera",
> + .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> + },
> + .id_table = lenovo_wmi_id_table,
> + .no_singleton = true,
> + .probe = lenovo_wmi_probe,
> + .notify = lenovo_wmi_notify,
> +};
> +
> +module_wmi_driver(lenovo_wmi_driver);
> +
> +MODULE_DEVICE_TABLE(wmi, lenovo_wmi_id_table);
> +MODULE_AUTHOR("Ai Chao <[email protected]>");
> +MODULE_DESCRIPTION("Lenovo WMI Camera Button Driver");
> +MODULE_LICENSE("GPL");