Hi,
On 8/16/22 11:20, margeyang wrote:
> From: Marge Yang <[email protected]>
>
> RMI4 F03 supports the Stick function,
> it's designed to support relative packet.
> This patch supports the following case.
> When relative packet can't be reported completely,
> it may miss one byte or two byte.
> New Synaptics firmware will report PARITY error.
> When timeout error or parity error happens,
> RMI4 driver will sends 0xFE command and
> ask FW to Re-send stick packet again.
>
> Signed-off-by: Marge Yang<[email protected]>
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <[email protected]>
note I see that Dmitry still has questions about this, so my
Reviewed-by is in no way a guarantee that this will get merged.
Please make sure to answer Dmitry's questions about this.
Regards,
Hans
> ---
> drivers/input/rmi4/rmi_f03.c | 74 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 73 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
> index c194b1664b10..563b40c2dc06 100644
> --- a/drivers/input/rmi4/rmi_f03.c
> +++ b/drivers/input/rmi4/rmi_f03.c
> @@ -23,8 +23,12 @@
> #define RMI_F03_BYTES_PER_DEVICE_SHIFT 4
> #define RMI_F03_QUEUE_LENGTH 0x0F
>
> +#define RMI_F03_RESET_STYK 0xFE
> +
> #define PSMOUSE_OOB_EXTRA_BTNS 0x01
>
> +#define RELATIVE_PACKET_SIZE 3
> +
> struct f03_data {
> struct rmi_function *fn;
>
> @@ -33,6 +37,11 @@ struct f03_data {
>
> unsigned int overwrite_buttons;
>
> + int iwritecommandcounter;
> + unsigned int ipacketindex;
> + unsigned int serio_flagsArry[RELATIVE_PACKET_SIZE];
> + u8 ob_dataArry[RELATIVE_PACKET_SIZE];
> +
> u8 device_count;
> u8 rx_queue_length;
> };
> @@ -88,6 +97,7 @@ static int rmi_f03_pt_write(struct serio *id, unsigned char val)
> return error;
> }
>
> + f03->iwritecommandcounter++;
> return 0;
> }
>
> @@ -107,6 +117,8 @@ static int rmi_f03_initialize(struct f03_data *f03)
> return error;
> }
>
> + f03->iwritecommandcounter = 0;
> + f03->ipacketindex = 0;
> f03->device_count = query1 & RMI_F03_DEVICE_COUNT;
> bytes_per_device = (query1 >> RMI_F03_BYTES_PER_DEVICE_SHIFT) &
> RMI_F03_BYTES_PER_DEVICE;
> @@ -284,6 +296,22 @@ static irqreturn_t rmi_f03_attention(int irq, void *ctx)
> ob_data = obs[i + RMI_F03_OB_DATA_OFFSET];
> serio_flags = 0;
>
> + if (ob_status & (RMI_F03_OB_FLAG_TIMEOUT | RMI_F03_OB_FLAG_PARITY)) {
> + // Send resend command to stick when timeout or parity error.
> + // Driver can receive the last stick packet.
> + unsigned char val = RMI_F03_RESET_STYK;
> +
> + error = rmi_write(f03->fn->rmi_dev, f03->fn->fd.data_base_addr, val);
> + if (error) {
> + dev_err(&f03->fn->dev,
> + "%s: Failed to rmi_write to F03 TX register (%d).\n",
> + __func__, error);
> + return error;
> + }
> + f03->ipacketindex = 0;
> + break;
> + }
> +
> if (!(ob_status & RMI_F03_RX_DATA_OFB))
> continue;
>
> @@ -298,7 +326,51 @@ static irqreturn_t rmi_f03_attention(int irq, void *ctx)
> serio_flags & SERIO_TIMEOUT ? 'Y' : 'N',
> serio_flags & SERIO_PARITY ? 'Y' : 'N');
>
> - serio_interrupt(f03->serio, ob_data, serio_flags);
> + if (f03->iwritecommandcounter > 0) {
> + // Read Acknowledge Byte after writing the PS2 command.
> + // It is not trackpoint data.
> + serio_interrupt(f03->serio, ob_data, serio_flags);
> + } else {
> + // The relative-mode PS/2 packet format is as follows:
> + //
> + // bit position position (as array of bytes)
> + // 7 6 5 4 3 2 1 0
> + // =================================+
> + // Yov Xov DY8 DX8 1 M R L | DATA[0]
> + // DX[7:0] | DATA[1]
> + // DY[7:0] | DATA[2]
> + // =================================+
> + // Yov: Y overflow
> + // Xov: X overflow
> + if ((f03->ipacketindex == 0) && (ob_data & ((BIT(7)|BIT(6))))) {
> + dev_err(&f03->fn->dev,
> + "%s: X or Y is overflow. (%x)\n",
> + __func__, ob_data);
> + break;
> + } else if ((f03->ipacketindex == 0) && !(ob_data & BIT(3))) {
> + dev_err(&f03->fn->dev,
> + "%s: New BIT 3 is not 1 for the first byte\n",
> + __func__);
> + break;
> + }
> + f03->ob_dataArry[f03->ipacketindex] = ob_data;
> + f03->serio_flagsArry[f03->ipacketindex] = serio_flags;
> + f03->ipacketindex++;
> +
> + if (f03->ipacketindex == RELATIVE_PACKET_SIZE) {
> + serio_interrupt(f03->serio, f03->ob_dataArry[0],
> + f03->serio_flagsArry[0]);
> + serio_interrupt(f03->serio, f03->ob_dataArry[1],
> + f03->serio_flagsArry[1]);
> + serio_interrupt(f03->serio, f03->ob_dataArry[2],
> + f03->serio_flagsArry[2]);
> + f03->ipacketindex = 0;
> + }
> + }
> + }
> + if (f03->iwritecommandcounter > 0) {
> + f03->ipacketindex = 0;
> + f03->iwritecommandcounter = f03->iwritecommandcounter - 1;
> }
>
> return IRQ_HANDLED;
Hi Dmitry,
Update Synaptics firmware's comment.
To address the transaction error case in the middle would potential lead to the unexpected data transaction and latency between styk device and host driver. F$03 didn't really parse any data packet but simply works as bridge functionality to bypass the command and response packets between styk device and driver.
Thanks
Marge Yang
-----Original Message-----
From: Hans de Goede <[email protected]>
Sent: Wednesday, August 17, 2022 10:12 PM
To: margeyang <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]
Cc: Marge Yang <[email protected]>; Derek Cheng <[email protected]>; Vincent Huang <[email protected]>
Subject: Re: [PATCH V4] Input: synaptics-rmi4 - filter incomplete relative packet.
CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi,
On 8/16/22 11:20, margeyang wrote:
> From: Marge Yang <[email protected]>
>
> RMI4 F03 supports the Stick function,
> it's designed to support relative packet.
> This patch supports the following case.
> When relative packet can't be reported completely, it may miss one
> byte or two byte.
> New Synaptics firmware will report PARITY error.
> When timeout error or parity error happens,
> RMI4 driver will sends 0xFE command and ask FW to Re-send stick packet
> again.
>
> Signed-off-by: Marge
> Yang<[email protected]>
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <[email protected]>
note I see that Dmitry still has questions about this, so my Reviewed-by is in no way a guarantee that this will get merged.
Please make sure to answer Dmitry's questions about this.
Regards,
Hans
> ---
> drivers/input/rmi4/rmi_f03.c | 74
> +++++++++++++++++++++++++++++++++++-
> 1 file changed, 73 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/rmi4/rmi_f03.c
> b/drivers/input/rmi4/rmi_f03.c index c194b1664b10..563b40c2dc06 100644
> --- a/drivers/input/rmi4/rmi_f03.c
> +++ b/drivers/input/rmi4/rmi_f03.c
> @@ -23,8 +23,12 @@
> #define RMI_F03_BYTES_PER_DEVICE_SHIFT 4
> #define RMI_F03_QUEUE_LENGTH 0x0F
>
> +#define RMI_F03_RESET_STYK 0xFE
> +
> #define PSMOUSE_OOB_EXTRA_BTNS 0x01
>
> +#define RELATIVE_PACKET_SIZE 3
> +
> struct f03_data {
> struct rmi_function *fn;
>
> @@ -33,6 +37,11 @@ struct f03_data {
>
> unsigned int overwrite_buttons;
>
> + int iwritecommandcounter;
> + unsigned int ipacketindex;
> + unsigned int serio_flagsArry[RELATIVE_PACKET_SIZE];
> + u8 ob_dataArry[RELATIVE_PACKET_SIZE];
> +
> u8 device_count;
> u8 rx_queue_length;
> };
> @@ -88,6 +97,7 @@ static int rmi_f03_pt_write(struct serio *id, unsigned char val)
> return error;
> }
>
> + f03->iwritecommandcounter++;
> return 0;
> }
>
> @@ -107,6 +117,8 @@ static int rmi_f03_initialize(struct f03_data *f03)
> return error;
> }
>
> + f03->iwritecommandcounter = 0;
> + f03->ipacketindex = 0;
> f03->device_count = query1 & RMI_F03_DEVICE_COUNT;
> bytes_per_device = (query1 >> RMI_F03_BYTES_PER_DEVICE_SHIFT) &
> RMI_F03_BYTES_PER_DEVICE; @@ -284,6
> +296,22 @@ static irqreturn_t rmi_f03_attention(int irq, void *ctx)
> ob_data = obs[i + RMI_F03_OB_DATA_OFFSET];
> serio_flags = 0;
>
> + if (ob_status & (RMI_F03_OB_FLAG_TIMEOUT | RMI_F03_OB_FLAG_PARITY)) {
> + // Send resend command to stick when timeout or parity error.
> + // Driver can receive the last stick packet.
> + unsigned char val = RMI_F03_RESET_STYK;
> +
> + error = rmi_write(f03->fn->rmi_dev, f03->fn->fd.data_base_addr, val);
> + if (error) {
> + dev_err(&f03->fn->dev,
> + "%s: Failed to rmi_write to F03 TX register (%d).\n",
> + __func__, error);
> + return error;
> + }
> + f03->ipacketindex = 0;
> + break;
> + }
> +
> if (!(ob_status & RMI_F03_RX_DATA_OFB))
> continue;
>
> @@ -298,7 +326,51 @@ static irqreturn_t rmi_f03_attention(int irq, void *ctx)
> serio_flags & SERIO_TIMEOUT ? 'Y' : 'N',
> serio_flags & SERIO_PARITY ? 'Y' : 'N');
>
> - serio_interrupt(f03->serio, ob_data, serio_flags);
> + if (f03->iwritecommandcounter > 0) {
> + // Read Acknowledge Byte after writing the PS2 command.
> + // It is not trackpoint data.
> + serio_interrupt(f03->serio, ob_data, serio_flags);
> + } else {
> + // The relative-mode PS/2 packet format is as follows:
> + //
> + // bit position position (as array of bytes)
> + // 7 6 5 4 3 2 1 0
> + // =================================+
> + // Yov Xov DY8 DX8 1 M R L | DATA[0]
> + // DX[7:0] | DATA[1]
> + // DY[7:0] | DATA[2]
> + // =================================+
> + // Yov: Y overflow
> + // Xov: X overflow
> + if ((f03->ipacketindex == 0) && (ob_data & ((BIT(7)|BIT(6))))) {
> + dev_err(&f03->fn->dev,
> + "%s: X or Y is overflow. (%x)\n",
> + __func__, ob_data);
> + break;
> + } else if ((f03->ipacketindex == 0) && !(ob_data & BIT(3))) {
> + dev_err(&f03->fn->dev,
> + "%s: New BIT 3 is not 1 for the first byte\n",
> + __func__);
> + break;
> + }
> + f03->ob_dataArry[f03->ipacketindex] = ob_data;
> + f03->serio_flagsArry[f03->ipacketindex] = serio_flags;
> + f03->ipacketindex++;
> +
> + if (f03->ipacketindex == RELATIVE_PACKET_SIZE) {
> + serio_interrupt(f03->serio, f03->ob_dataArry[0],
> + f03->serio_flagsArry[0]);
> + serio_interrupt(f03->serio, f03->ob_dataArry[1],
> + f03->serio_flagsArry[1]);
> + serio_interrupt(f03->serio, f03->ob_dataArry[2],
> + f03->serio_flagsArry[2]);
> + f03->ipacketindex = 0;
> + }
> + }
> + }
> + if (f03->iwritecommandcounter > 0) {
> + f03->ipacketindex = 0;
> + f03->iwritecommandcounter = f03->iwritecommandcounter -
> + 1;
> }
>
> return IRQ_HANDLED;