Changes in V6 => V7:
V6: https://lore.kernel.org/all/[email protected]/
1. Rebase on bpf-next/master.
Changes in V5 => V6:
V5: https://lore.kernel.org/all/[email protected]/
1. Implement a text poke api to reduce code repeatition.
2. Use flush_icache_range() in place of caches_clean_inval_pou() in the
functions that modify code.
3. Optimize the bpf_jit_free() by not copying the all instructions on
the rw image to the ro_image
Changes in V4 => v5:
1. Remove the patch for making prog pack allocator portable as it will come
through the RISCV tree[1].
2. Add a new function aarch64_insn_set() to be used in
bpf_arch_text_invalidate() for putting illegal instructions after a
program is removed. The earlier implementation of bpf_arch_text_invalidate()
was calling aarch64_insn_patch_text_nosync() in a loop and making it slow
because each call invalidated the cache.
Here is test_tag now:
[root@ip-172-31-6-176 bpf]# time ./test_tag
test_tag: OK (40945 tests)
real 0m19.695s
user 0m1.514s
sys 0m17.841s
test_tag without these patches:
[root@ip-172-31-6-176 bpf]# time ./test_tag
test_tag: OK (40945 tests)
real 0m21.487s
user 0m1.647s
sys 0m19.106s
test_tag in the previous version was really slow > 2 minutes. see [2]
3. Add cache invalidation in aarch64_insn_copy() so other users can call the
function without worrying about the cache. Currently only bpf_arch_text_copy()
is using it, but there might be more users in the future.
Chanes in V3 => V4: Changes only in 3rd patch
1. Fix the I-cache maintenance: Clean the data cache and invalidate the i-Cache
only *after* the instructions have been copied to the ROX region.
Chanes in V2 => V3: Changes only in 3rd patch
1. Set prog = orig_prog; in the failure path of bpf_jit_binary_pack_finalize()
call.
2. Add comments explaining the usage of the offsets in the exception table.
Changes in v1 => v2:
1. Make the naming consistent in the 3rd patch:
ro_image and image
ro_header and header
ro_image_ptr and image_ptr
2. Use names dst/src in place of addr/opcode in second patch.
3. Add Acked-by: Song Liu <[email protected]> in 1st and 2nd patch.
BPF programs currently consume a page each on ARM64. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.
Song Liu introduced the BPF prog pack allocator[3] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.
This patch series enables the BPF prog pack allocator for the ARM64 BPF JIT.
====================================================
Performance Analysis of prog pack allocator on ARM64
====================================================
To test the performance of the BPF prog pack allocator on ARM64, a stresser
tool[4] was built. This tool loads 8 BPF programs on the system and triggers
5 of them in an infinite loop by doing system calls.
The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
In the above environment we try to build Python-3.8.4 and try to find different
iTLB metrics for the compilation done by gcc-12.2.0.
The source code[5] is configured with the following command:
/configure --enable-optimizations --with-ensurepip=install
Then the runner script is executed with the following command:
/run.sh "perf stat -e ITLB_WALK,L1I_TLB,INST_RETIRED,iTLB-load-misses -a make -j32"
This builds Python while 160 BPF programs are loaded and 100 are being constantly
triggered and measures iTLB related metrics.
The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.
The tests were run on qemu-system-aarch64 with 32 cpus, 4G memory, -machine virt,
-cpu host, and -enable-kvm.
Results
-------
Before enabling prog pack allocator:
------------------------------------
Performance counter stats for 'system wide':
333278635 ITLB_WALK
6762692976558 L1I_TLB
25359571423901 INST_RETIRED
15824054789 iTLB-load-misses
189.029769053 seconds time elapsed
After enabling prog pack allocator:
-----------------------------------
Performance counter stats for 'system wide':
190333544 ITLB_WALK
6712712386528 L1I_TLB
25278233304411 INST_RETIRED
5716757866 iTLB-load-misses
185.392650561 seconds time elapsed
Improvements in metrics
-----------------------
Compilation time ---> 1.92% faster
iTLB-load-misses/Sec (Less is better) ---> 63.16% decrease
ITLB_WALK/1000 INST_RETIRED (Less is better) ---> 42.71% decrease
ITLB_Walk/L1I_TLB (Less is better) ---> 42.47% decrease
[1] https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git/commit/?h=for-next&id=20e490adea279d49d57b800475938f5b67926d98
[2] https://lore.kernel.org/all/CANk7y0gcP3dF2mESLp5JN1+9iDfgtiWRFGqLkCgZD6wby1kQOw@mail.gmail.com/
[3] https://lore.kernel.org/bpf/[email protected]/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://www.python.org/ftp/python/3.8.4/Python-3.8.4.tgz
Puranjay Mohan (2):
arm64: patching: implement text_poke API
bpf, arm64: use bpf_prog_pack for memory management
arch/arm64/include/asm/patching.h | 2 +
arch/arm64/kernel/patching.c | 80 +++++++++++++++++
arch/arm64/net/bpf_jit_comp.c | 139 ++++++++++++++++++++++++------
3 files changed, 197 insertions(+), 24 deletions(-)
--
2.40.1
Use bpf_jit_binary_pack_alloc for memory management of JIT binaries in
ARM64 BPF JIT. The bpf_jit_binary_pack_alloc creates a pair of RW and RX
buffers. The JIT writes the program into the RW buffer. When the JIT is
done, the program is copied to the final RX buffer
with bpf_jit_binary_pack_finalize.
Implement bpf_arch_text_copy() and bpf_arch_text_invalidate() for ARM64
JIT as these functions are required by bpf_jit_binary_pack allocator.
Signed-off-by: Puranjay Mohan <[email protected]>
Acked-by: Song Liu <[email protected]>
---
arch/arm64/net/bpf_jit_comp.c | 139 ++++++++++++++++++++++++++++------
1 file changed, 115 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index cfd5434de483..58e54a1929c9 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -76,6 +76,7 @@ struct jit_ctx {
int *offset;
int exentry_idx;
__le32 *image;
+ __le32 *ro_image;
u32 stack_size;
int fpb_offset;
};
@@ -205,6 +206,14 @@ static void jit_fill_hole(void *area, unsigned int size)
*ptr++ = cpu_to_le32(AARCH64_BREAK_FAULT);
}
+int bpf_arch_text_invalidate(void *dst, size_t len)
+{
+ if (!aarch64_insn_set(dst, AARCH64_BREAK_FAULT, len))
+ return -EINVAL;
+
+ return 0;
+}
+
static inline int epilogue_offset(const struct jit_ctx *ctx)
{
int to = ctx->epilogue_offset;
@@ -707,7 +716,8 @@ static int add_exception_handler(const struct bpf_insn *insn,
struct jit_ctx *ctx,
int dst_reg)
{
- off_t offset;
+ off_t ins_offset;
+ off_t fixup_offset;
unsigned long pc;
struct exception_table_entry *ex;
@@ -724,12 +734,17 @@ static int add_exception_handler(const struct bpf_insn *insn,
return -EINVAL;
ex = &ctx->prog->aux->extable[ctx->exentry_idx];
- pc = (unsigned long)&ctx->image[ctx->idx - 1];
+ pc = (unsigned long)&ctx->ro_image[ctx->idx - 1];
- offset = pc - (long)&ex->insn;
- if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
+ /*
+ * This is the relative offset of the instruction that may fault from
+ * the exception table itself. This will be written to the exception
+ * table and if this instruction faults, the destination register will
+ * be set to '0' and the execution will jump to the next instruction.
+ */
+ ins_offset = pc - (long)&ex->insn;
+ if (WARN_ON_ONCE(ins_offset >= 0 || ins_offset < INT_MIN))
return -ERANGE;
- ex->insn = offset;
/*
* Since the extable follows the program, the fixup offset is always
@@ -738,12 +753,25 @@ static int add_exception_handler(const struct bpf_insn *insn,
* bits. We don't need to worry about buildtime or runtime sort
* modifying the upper bits because the table is already sorted, and
* isn't part of the main exception table.
+ *
+ * The fixup_offset is set to the next instruction from the instruction
+ * that may fault. The execution will jump to this after handling the
+ * fault.
*/
- offset = (long)&ex->fixup - (pc + AARCH64_INSN_SIZE);
- if (!FIELD_FIT(BPF_FIXUP_OFFSET_MASK, offset))
+ fixup_offset = (long)&ex->fixup - (pc + AARCH64_INSN_SIZE);
+ if (!FIELD_FIT(BPF_FIXUP_OFFSET_MASK, fixup_offset))
return -ERANGE;
- ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, offset) |
+ /*
+ * The offsets above have been calculated using the RO buffer but we
+ * need to use the R/W buffer for writes.
+ * switch ex to rw buffer for writing.
+ */
+ ex = (void *)ctx->image + ((void *)ex - (void *)ctx->ro_image);
+
+ ex->insn = ins_offset;
+
+ ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, fixup_offset) |
FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
ex->type = EX_TYPE_BPF;
@@ -1511,7 +1539,8 @@ static inline void bpf_flush_icache(void *start, void *end)
struct arm64_jit_data {
struct bpf_binary_header *header;
- u8 *image;
+ u8 *ro_image;
+ struct bpf_binary_header *ro_header;
struct jit_ctx ctx;
};
@@ -1520,12 +1549,14 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
int image_size, prog_size, extable_size, extable_align, extable_offset;
struct bpf_prog *tmp, *orig_prog = prog;
struct bpf_binary_header *header;
+ struct bpf_binary_header *ro_header;
struct arm64_jit_data *jit_data;
bool was_classic = bpf_prog_was_classic(prog);
bool tmp_blinded = false;
bool extra_pass = false;
struct jit_ctx ctx;
u8 *image_ptr;
+ u8 *ro_image_ptr;
if (!prog->jit_requested)
return orig_prog;
@@ -1552,8 +1583,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
}
if (jit_data->ctx.offset) {
ctx = jit_data->ctx;
- image_ptr = jit_data->image;
+ ro_image_ptr = jit_data->ro_image;
+ ro_header = jit_data->ro_header;
header = jit_data->header;
+ image_ptr = (void *)header + ((void *)ro_image_ptr
+ - (void *)ro_header);
extra_pass = true;
prog_size = sizeof(u32) * ctx.idx;
goto skip_init_ctx;
@@ -1598,18 +1632,27 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
/* also allocate space for plt target */
extable_offset = round_up(prog_size + PLT_TARGET_SIZE, extable_align);
image_size = extable_offset + extable_size;
- header = bpf_jit_binary_alloc(image_size, &image_ptr,
- sizeof(u32), jit_fill_hole);
- if (header == NULL) {
+ ro_header = bpf_jit_binary_pack_alloc(image_size, &ro_image_ptr,
+ sizeof(u32), &header, &image_ptr,
+ jit_fill_hole);
+ if (!ro_header) {
prog = orig_prog;
goto out_off;
}
/* 2. Now, the actual pass. */
+ /*
+ * Use the image(RW) for writing the JITed instructions. But also save
+ * the ro_image(RX) for calculating the offsets in the image. The RW
+ * image will be later copied to the RX image from where the program
+ * will run. The bpf_jit_binary_pack_finalize() will do this copy in the
+ * final step.
+ */
ctx.image = (__le32 *)image_ptr;
+ ctx.ro_image = (__le32 *)ro_image_ptr;
if (extable_size)
- prog->aux->extable = (void *)image_ptr + extable_offset;
+ prog->aux->extable = (void *)ro_image_ptr + extable_offset;
skip_init_ctx:
ctx.idx = 0;
ctx.exentry_idx = 0;
@@ -1617,9 +1660,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
build_prologue(&ctx, was_classic);
if (build_body(&ctx, extra_pass)) {
- bpf_jit_binary_free(header);
prog = orig_prog;
- goto out_off;
+ goto out_free_hdr;
}
build_epilogue(&ctx);
@@ -1627,34 +1669,44 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
/* 3. Extra pass to validate JITed code. */
if (validate_ctx(&ctx)) {
- bpf_jit_binary_free(header);
prog = orig_prog;
- goto out_off;
+ goto out_free_hdr;
}
/* And we're done. */
if (bpf_jit_enable > 1)
bpf_jit_dump(prog->len, prog_size, 2, ctx.image);
- bpf_flush_icache(header, ctx.image + ctx.idx);
-
if (!prog->is_func || extra_pass) {
if (extra_pass && ctx.idx != jit_data->ctx.idx) {
pr_err_once("multi-func JIT bug %d != %d\n",
ctx.idx, jit_data->ctx.idx);
- bpf_jit_binary_free(header);
prog->bpf_func = NULL;
prog->jited = 0;
prog->jited_len = 0;
+ goto out_free_hdr;
+ }
+ if (WARN_ON(bpf_jit_binary_pack_finalize(prog, ro_header,
+ header))) {
+ /* ro_header has been freed */
+ ro_header = NULL;
+ prog = orig_prog;
goto out_off;
}
- bpf_jit_binary_lock_ro(header);
+ /*
+ * The instructions have now been copied to the ROX region from
+ * where they will execute. Now the data cache has to be cleaned to
+ * the PoU and the I-cache has to be invalidated for the VAs.
+ */
+ bpf_flush_icache(ro_header, ctx.ro_image + ctx.idx);
} else {
jit_data->ctx = ctx;
- jit_data->image = image_ptr;
+ jit_data->ro_image = ro_image_ptr;
jit_data->header = header;
+ jit_data->ro_header = ro_header;
}
- prog->bpf_func = (void *)ctx.image;
+
+ prog->bpf_func = (void *)ctx.ro_image;
prog->jited = 1;
prog->jited_len = prog_size;
@@ -1675,6 +1727,14 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
bpf_jit_prog_release_other(prog, prog == orig_prog ?
tmp : orig_prog);
return prog;
+
+out_free_hdr:
+ if (header) {
+ bpf_arch_text_copy(&ro_header->size, &header->size,
+ sizeof(header->size));
+ bpf_jit_binary_pack_free(ro_header, header);
+ }
+ goto out_off;
}
bool bpf_jit_supports_kfunc_call(void)
@@ -1682,6 +1742,13 @@ bool bpf_jit_supports_kfunc_call(void)
return true;
}
+void *bpf_arch_text_copy(void *dst, void *src, size_t len)
+{
+ if (!aarch64_insn_copy(dst, src, len))
+ return ERR_PTR(-EINVAL);
+ return dst;
+}
+
u64 bpf_jit_alloc_exec_limit(void)
{
return VMALLOC_END - VMALLOC_START;
@@ -2310,3 +2377,27 @@ bool bpf_jit_supports_ptr_xchg(void)
{
return true;
}
+
+void bpf_jit_free(struct bpf_prog *prog)
+{
+ if (prog->jited) {
+ struct arm64_jit_data *jit_data = prog->aux->jit_data;
+ struct bpf_binary_header *hdr;
+
+ /*
+ * If we fail the final pass of JIT (from jit_subprogs),
+ * the program may not be finalized yet. Call finalize here
+ * before freeing it.
+ */
+ if (jit_data) {
+ bpf_arch_text_copy(&jit_data->ro_header->size, &jit_data->header->size,
+ sizeof(jit_data->header->size));
+ kfree(jit_data);
+ }
+ hdr = bpf_jit_binary_pack_hdr(prog);
+ bpf_jit_binary_pack_free(hdr, NULL);
+ WARN_ON_ONCE(!bpf_prog_kallsyms_verify_off(prog));
+ }
+
+ bpf_prog_unlock_free(prog);
+}
--
2.40.1
The text_poke API is used to implement functions like memcpy() and
memset() for instruction memory (RO+X). The implementation is similar to
the x86 version.
This will be used by the BPF JIT to write and modify BPF programs. There
could be more users of this in the future.
Signed-off-by: Puranjay Mohan <[email protected]>
---
arch/arm64/include/asm/patching.h | 2 +
arch/arm64/kernel/patching.c | 80 +++++++++++++++++++++++++++++++
2 files changed, 82 insertions(+)
diff --git a/arch/arm64/include/asm/patching.h b/arch/arm64/include/asm/patching.h
index 68908b82b168..587bdb91ab7a 100644
--- a/arch/arm64/include/asm/patching.h
+++ b/arch/arm64/include/asm/patching.h
@@ -8,6 +8,8 @@ int aarch64_insn_read(void *addr, u32 *insnp);
int aarch64_insn_write(void *addr, u32 insn);
int aarch64_insn_write_literal_u64(void *addr, u64 val);
+void *aarch64_insn_set(void *dst, u32 insn, size_t len);
+void *aarch64_insn_copy(void *dst, void *src, size_t len);
int aarch64_insn_patch_text_nosync(void *addr, u32 insn);
int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt);
diff --git a/arch/arm64/kernel/patching.c b/arch/arm64/kernel/patching.c
index b4835f6d594b..5c2d34d890cf 100644
--- a/arch/arm64/kernel/patching.c
+++ b/arch/arm64/kernel/patching.c
@@ -105,6 +105,86 @@ noinstr int aarch64_insn_write_literal_u64(void *addr, u64 val)
return ret;
}
+typedef void text_poke_f(void *dst, void *src, size_t patched, size_t len);
+
+static void *__text_poke(text_poke_f func, void *addr, void *src, size_t len)
+{
+ unsigned long flags;
+ size_t patched = 0;
+ size_t size;
+ void *waddr;
+ void *ptr;
+ int ret;
+
+ raw_spin_lock_irqsave(&patch_lock, flags);
+
+ while (patched < len) {
+ ptr = addr + patched;
+ size = min_t(size_t, PAGE_SIZE - offset_in_page(ptr),
+ len - patched);
+
+ waddr = patch_map(ptr, FIX_TEXT_POKE0);
+ func(waddr, src, patched, size);
+ patch_unmap(FIX_TEXT_POKE0);
+
+ if (ret < 0) {
+ raw_spin_unlock_irqrestore(&patch_lock, flags);
+ return NULL;
+ }
+ patched += size;
+ }
+ raw_spin_unlock_irqrestore(&patch_lock, flags);
+
+ flush_icache_range((uintptr_t)addr, (uintptr_t)addr + len);
+
+ return addr;
+}
+
+static void text_poke_memcpy(void *dst, void *src, size_t patched, size_t len)
+{
+ copy_to_kernel_nofault(dst, src + patched, len);
+}
+
+static void text_poke_memset(void *dst, void *src, size_t patched, size_t len)
+{
+ u32 c = *(u32 *)src;
+
+ memset32(dst, c, len / 4);
+}
+
+/**
+ * aarch64_insn_copy - Copy instructions into (an unused part of) RX memory
+ * @dst: address to modify
+ * @src: source of the copy
+ * @len: length to copy
+ *
+ * Useful for JITs to dump new code blocks into unused regions of RX memory.
+ */
+noinstr void *aarch64_insn_copy(void *dst, void *src, size_t len)
+{
+ /* A64 instructions must be word aligned */
+ if ((uintptr_t)dst & 0x3)
+ return NULL;
+
+ return __text_poke(text_poke_memcpy, dst, src, len);
+}
+
+/**
+ * aarch64_insn_set - memset for RX memory regions.
+ * @dst: address to modify
+ * @insn: value to set
+ * @len: length of memory region.
+ *
+ * Useful for JITs to fill regions of RX memory with illegal instructions.
+ */
+noinstr void *aarch64_insn_set(void *dst, u32 insn, size_t len)
+{
+ if ((uintptr_t)dst & 0x3)
+ return NULL;
+
+ return __text_poke(text_poke_memset, dst, &insn, len);
+}
+
int __kprobes aarch64_insn_patch_text_nosync(void *addr, u32 insn)
{
u32 *tp = addr;
--
2.40.1
On 1/25/2024 9:31 PM, Puranjay Mohan wrote:
> The text_poke API is used to implement functions like memcpy() and
> memset() for instruction memory (RO+X). The implementation is similar to
> the x86 version.
>
> This will be used by the BPF JIT to write and modify BPF programs. There
> could be more users of this in the future.
>
> Signed-off-by: Puranjay Mohan <[email protected]>
> ---
> arch/arm64/include/asm/patching.h | 2 +
> arch/arm64/kernel/patching.c | 80 +++++++++++++++++++++++++++++++
> 2 files changed, 82 insertions(+)
>
> diff --git a/arch/arm64/include/asm/patching.h b/arch/arm64/include/asm/patching.h
> index 68908b82b168..587bdb91ab7a 100644
> --- a/arch/arm64/include/asm/patching.h
> +++ b/arch/arm64/include/asm/patching.h
> @@ -8,6 +8,8 @@ int aarch64_insn_read(void *addr, u32 *insnp);
> int aarch64_insn_write(void *addr, u32 insn);
>
> int aarch64_insn_write_literal_u64(void *addr, u64 val);
> +void *aarch64_insn_set(void *dst, u32 insn, size_t len);
> +void *aarch64_insn_copy(void *dst, void *src, size_t len);
>
> int aarch64_insn_patch_text_nosync(void *addr, u32 insn);
> int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt);
> diff --git a/arch/arm64/kernel/patching.c b/arch/arm64/kernel/patching.c
> index b4835f6d594b..5c2d34d890cf 100644
> --- a/arch/arm64/kernel/patching.c
> +++ b/arch/arm64/kernel/patching.c
> @@ -105,6 +105,86 @@ noinstr int aarch64_insn_write_literal_u64(void *addr, u64 val)
> return ret;
> }
>
> +typedef void text_poke_f(void *dst, void *src, size_t patched, size_t len);
> +
How about removing the argument 'patched' and passing 'src + patched' as the
second argument?
> +static void *__text_poke(text_poke_f func, void *addr, void *src, size_t len)
> +{
> + unsigned long flags;
> + size_t patched = 0;
> + size_t size;
> + void *waddr;
> + void *ptr;
> + int ret;
> +
> + raw_spin_lock_irqsave(&patch_lock, flags);
> +
> + while (patched < len) {
> + ptr = addr + patched;
> + size = min_t(size_t, PAGE_SIZE - offset_in_page(ptr),
> + len - patched);
> +
> + waddr = patch_map(ptr, FIX_TEXT_POKE0);
> + func(waddr, src, patched, size);
> + patch_unmap(FIX_TEXT_POKE0);
> +
> + if (ret < 0) {
Where is 'ret' assigned?
> + raw_spin_unlock_irqrestore(&patch_lock, flags);
> + return NULL;
> + }
> + patched += size;
> + }
> + raw_spin_unlock_irqrestore(&patch_lock, flags);
> +
> + flush_icache_range((uintptr_t)addr, (uintptr_t)addr + len);
> +
> + return addr;
> +}
> +
> +static void text_poke_memcpy(void *dst, void *src, size_t patched, size_t len)
> +{
> + copy_to_kernel_nofault(dst, src + patched, len);
> +}
> +
> +static void text_poke_memset(void *dst, void *src, size_t patched, size_t len)
> +{
> + u32 c = *(u32 *)src;
> +
> + memset32(dst, c, len / 4);
> +}
> +
> +/**
> + * aarch64_insn_copy - Copy instructions into (an unused part of) RX memory
> + * @dst: address to modify
> + * @src: source of the copy
> + * @len: length to copy
> + *
> + * Useful for JITs to dump new code blocks into unused regions of RX memory.
> + */
> +noinstr void *aarch64_insn_copy(void *dst, void *src, size_t len)
> +{
> + /* A64 instructions must be word aligned */
> + if ((uintptr_t)dst & 0x3)
> + return NULL;
> +
> + return __text_poke(text_poke_memcpy, dst, src, len);
> +}
> +
> +/**
> + * aarch64_insn_set - memset for RX memory regions.
> + * @dst: address to modify
> + * @insn: value to set
> + * @len: length of memory region.
> + *
> + * Useful for JITs to fill regions of RX memory with illegal instructions.
> + */
> +noinstr void *aarch64_insn_set(void *dst, u32 insn, size_t len)
> +{
> + if ((uintptr_t)dst & 0x3)
> + return NULL;
> +
> + return __text_poke(text_poke_memset, dst, &insn, len);
> +}
> +
> int __kprobes aarch64_insn_patch_text_nosync(void *addr, u32 insn)
> {
> u32 *tp = addr;
Xu Kuohai <[email protected]> writes:
> On 1/25/2024 9:31 PM, Puranjay Mohan wrote:
>> The text_poke API is used to implement functions like memcpy() and
>> memset() for instruction memory (RO+X). The implementation is similar to
>> the x86 version.
>>
>> This will be used by the BPF JIT to write and modify BPF programs. There
>> could be more users of this in the future.
>>
>> Signed-off-by: Puranjay Mohan <[email protected]>
>> ---
>> arch/arm64/include/asm/patching.h | 2 +
>> arch/arm64/kernel/patching.c | 80 +++++++++++++++++++++++++++++++
>> 2 files changed, 82 insertions(+)
>>
>> diff --git a/arch/arm64/include/asm/patching.h b/arch/arm64/include/asm/patching.h
>> index 68908b82b168..587bdb91ab7a 100644
>> --- a/arch/arm64/include/asm/patching.h
>> +++ b/arch/arm64/include/asm/patching.h
>> @@ -8,6 +8,8 @@ int aarch64_insn_read(void *addr, u32 *insnp);
>> int aarch64_insn_write(void *addr, u32 insn);
>>
>> int aarch64_insn_write_literal_u64(void *addr, u64 val);
>> +void *aarch64_insn_set(void *dst, u32 insn, size_t len);
>> +void *aarch64_insn_copy(void *dst, void *src, size_t len);
>>
>> int aarch64_insn_patch_text_nosync(void *addr, u32 insn);
>> int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt);
>> diff --git a/arch/arm64/kernel/patching.c b/arch/arm64/kernel/patching.c
>> index b4835f6d594b..5c2d34d890cf 100644
>> --- a/arch/arm64/kernel/patching.c
>> +++ b/arch/arm64/kernel/patching.c
>> @@ -105,6 +105,86 @@ noinstr int aarch64_insn_write_literal_u64(void *addr, u64 val)
>> return ret;
>> }
>>
>> +typedef void text_poke_f(void *dst, void *src, size_t patched, size_t len);
>> +
>
> How about removing the argument 'patched' and passing 'src + patched' as the
> second argument?
>
The memcpy() function needs 'src + patched' but the memset() needs only the 'src' and
will ignore the 'patched'. To make these implementations generic, I pass
both src and patched separately and allow the implementation of
text_poke_f() to use them.
If you think there is a better way to implement this then I would love
to use that.
>> +static void *__text_poke(text_poke_f func, void *addr, void *src, size_t len)
>> +{
>> + unsigned long flags;
>> + size_t patched = 0;
>> + size_t size;
>> + void *waddr;
>> + void *ptr;
>> + int ret;
>> +
>> + raw_spin_lock_irqsave(&patch_lock, flags);
>> +
>> + while (patched < len) {
>> + ptr = addr + patched;
>> + size = min_t(size_t, PAGE_SIZE - offset_in_page(ptr),
>> + len - patched);
>> +
>> + waddr = patch_map(ptr, FIX_TEXT_POKE0);
>> + func(waddr, src, patched, size);
>> + patch_unmap(FIX_TEXT_POKE0);
>> +
>> + if (ret < 0) {
>
> Where is 'ret' assigned?
>
Will remove the error check in next version as func() is of type void
and this error check was left from the previous version.
Thanks,
Puranjay