Fix checkpatch warnings for struct member pFirmware.
Signed-off-by: Valentin Vidic <[email protected]>
---
v2: drop the 'p' prefix from the struct member and always
use priv->firmware for access.
v3: rebase on staging-testing branch
.../staging/rtl8192e/rtl8192e/r8192E_dev.c | 8 +++---
.../rtl8192e/rtl8192e/r8192E_firmware.c | 25 ++++++++-----------
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 8 +++---
drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 2 +-
4 files changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
index 5832ccdb4e50..54f5c7574f8a 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
@@ -622,19 +622,19 @@ bool rtl92e_start_adapter(struct net_device *dev)
rtl92e_writeb(dev, ANAPAR, 0x37);
mdelay(500);
}
- priv->pFirmware->status = FW_STATUS_0_INIT;
+ priv->firmware->status = FW_STATUS_0_INIT;
if (priv->RegRfOff)
priv->rtllib->eRFPowerState = eRfOff;
ulRegRead = rtl92e_readl(dev, CPU_GEN);
- if (priv->pFirmware->status == FW_STATUS_0_INIT)
+ if (priv->firmware->status == FW_STATUS_0_INIT)
ulRegRead |= CPU_GEN_SYSTEM_RESET;
- else if (priv->pFirmware->status == FW_STATUS_5_READY)
+ else if (priv->firmware->status == FW_STATUS_5_READY)
ulRegRead |= CPU_GEN_FIRMWARE_RESET;
else
netdev_err(dev, "%s(): undefined firmware state: %d.\n",
- __func__, priv->pFirmware->status);
+ __func__, priv->firmware->status);
rtl92e_writel(dev, CPU_GEN, ulRegRead);
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
index 789d288d7503..b4b702623bfe 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
@@ -51,32 +51,31 @@ static bool _rtl92e_fw_check_ready(struct net_device *dev,
u8 load_fw_status)
{
struct r8192_priv *priv = rtllib_priv(dev);
- struct rt_firmware *pfirmware = priv->pFirmware;
bool rt_status = true;
switch (load_fw_status) {
case FW_INIT_STEP0_BOOT:
- pfirmware->status = FW_STATUS_1_MOVE_BOOT_CODE;
+ priv->firmware->status = FW_STATUS_1_MOVE_BOOT_CODE;
break;
case FW_INIT_STEP1_MAIN:
- pfirmware->status = FW_STATUS_2_MOVE_MAIN_CODE;
+ priv->firmware->status = FW_STATUS_2_MOVE_MAIN_CODE;
rt_status = _rtl92e_fw_boot_cpu(dev);
if (rt_status)
- pfirmware->status = FW_STATUS_3_TURNON_CPU;
+ priv->firmware->status = FW_STATUS_3_TURNON_CPU;
else
netdev_dbg(dev, "_rtl92e_fw_boot_cpu fail!\n");
break;
case FW_INIT_STEP2_DATA:
- pfirmware->status = FW_STATUS_4_MOVE_DATA_CODE;
+ priv->firmware->status = FW_STATUS_4_MOVE_DATA_CODE;
mdelay(1);
rt_status = _rtl92e_wait_for_fw(dev, CPU_GEN_FIRM_RDY, 20);
if (rt_status)
- pfirmware->status = FW_STATUS_5_READY;
+ priv->firmware->status = FW_STATUS_5_READY;
break;
default:
rt_status = false;
@@ -134,22 +133,20 @@ bool rtl92e_init_fw(struct net_device *dev)
enum opt_rst_type rst_opt = OPT_SYSTEM_RESET;
enum firmware_init_step starting_state = FW_INIT_STEP0_BOOT;
- struct rt_firmware *pfirmware = priv->pFirmware;
-
netdev_dbg(dev, " PlatformInitFirmware()==>\n");
- if (pfirmware->status == FW_STATUS_0_INIT) {
+ if (priv->firmware->status == FW_STATUS_0_INIT) {
rst_opt = OPT_SYSTEM_RESET;
starting_state = FW_INIT_STEP0_BOOT;
- } else if (pfirmware->status == FW_STATUS_5_READY) {
+ } else if (priv->firmware->status == FW_STATUS_5_READY) {
rst_opt = OPT_FIRMWARE_RESET;
starting_state = FW_INIT_STEP2_DATA;
}
for (i = starting_state; i <= FW_INIT_STEP2_DATA; i++) {
if (rst_opt == OPT_SYSTEM_RESET) {
- if (pfirmware->blobs[i].size == 0) {
+ if (priv->firmware->blobs[i].size == 0) {
const char *fw_name[3] = {
RTL8192E_BOOT_IMG_FW,
RTL8192E_MAIN_IMG_FW,
@@ -161,15 +158,15 @@ bool rtl92e_init_fw(struct net_device *dev)
pad = 128;
if (!_rtl92e_fw_prepare(dev,
- &pfirmware->blobs[i],
+ &priv->firmware->blobs[i],
fw_name[i],
pad))
goto download_firmware_fail;
}
}
- mapped_file = pfirmware->blobs[i].data;
- file_length = pfirmware->blobs[i].size;
+ mapped_file = priv->firmware->blobs[i].data;
+ file_length = priv->firmware->blobs[i].size;
rt_status = rtl92e_send_cmd_pkt(dev, DESC_PACKET_TYPE_INIT,
mapped_file, file_length);
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index 671fe547639b..94e8f0706ed4 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -907,8 +907,8 @@ static void _rtl92e_init_priv_variable(struct net_device *dev)
priv->card_type = PCI;
- priv->pFirmware = vzalloc(sizeof(struct rt_firmware));
- if (!priv->pFirmware)
+ priv->firmware = vzalloc(sizeof(*priv->firmware));
+ if (!priv->firmware)
netdev_err(dev,
"rtl8192e: Unable to allocate space for firmware\n");
@@ -2409,8 +2409,8 @@ static void _rtl92e_pci_disconnect(struct pci_dev *pdev)
priv->polling_timer_on = 0;
_rtl92e_down(dev, true);
rtl92e_dm_deinit(dev);
- vfree(priv->pFirmware);
- priv->pFirmware = NULL;
+ vfree(priv->firmware);
+ priv->firmware = NULL;
_rtl92e_free_rx_ring(dev);
for (i = 0; i < MAX_TX_QUEUE_COUNT; i++)
_rtl92e_free_tx_ring(dev, i);
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
index 093887bcd463..dba789f0c9e6 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
@@ -343,7 +343,7 @@ struct r8192_priv {
enum acm_method AcmMethod;
- struct rt_firmware *pFirmware;
+ struct rt_firmware *firmware;
enum rtl819x_loopback LoopbackMode;
struct timer_list watch_dog_timer;
--
2.30.2
On 9/25/22 14:23, Valentin Vidic wrote:
> Fix checkpatch warnings for struct member pFirmware.
This is too short description as you take out:
struct rt_firmware *pfirmware = priv->pFirmware;
And replace pfirmware with priv->firmware
>
> Signed-off-by: Valentin Vidic <[email protected]>
> ---
> v2: drop the 'p' prefix from the struct member and always
> use priv->firmware for access.
> v3: rebase on staging-testing branch
>
> .../staging/rtl8192e/rtl8192e/r8192E_dev.c | 8 +++---
> .../rtl8192e/rtl8192e/r8192E_firmware.c | 25 ++++++++-----------
> drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 8 +++---
> drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 2 +-
> 4 files changed, 20 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
> index 5832ccdb4e50..54f5c7574f8a 100644
> --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
> +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
> @@ -622,19 +622,19 @@ bool rtl92e_start_adapter(struct net_device *dev)
> rtl92e_writeb(dev, ANAPAR, 0x37);
> mdelay(500);
> }
> - priv->pFirmware->status = FW_STATUS_0_INIT;
> + priv->firmware->status = FW_STATUS_0_INIT;
>
> if (priv->RegRfOff)
> priv->rtllib->eRFPowerState = eRfOff;
>
> ulRegRead = rtl92e_readl(dev, CPU_GEN);
> - if (priv->pFirmware->status == FW_STATUS_0_INIT)
> + if (priv->firmware->status == FW_STATUS_0_INIT)
> ulRegRead |= CPU_GEN_SYSTEM_RESET;
> - else if (priv->pFirmware->status == FW_STATUS_5_READY)
> + else if (priv->firmware->status == FW_STATUS_5_READY)
> ulRegRead |= CPU_GEN_FIRMWARE_RESET;
> else
> netdev_err(dev, "%s(): undefined firmware state: %d.\n",
> - __func__, priv->pFirmware->status);
> + __func__, priv->firmware->status);
>
> rtl92e_writel(dev, CPU_GEN, ulRegRead);
>
> diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
> index 789d288d7503..b4b702623bfe 100644
> --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
> +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
> @@ -51,32 +51,31 @@ static bool _rtl92e_fw_check_ready(struct net_device *dev,
> u8 load_fw_status)
> {
> struct r8192_priv *priv = rtllib_priv(dev);
> - struct rt_firmware *pfirmware = priv->pFirmware;
> bool rt_status = true;
>
> switch (load_fw_status) {
> case FW_INIT_STEP0_BOOT:
> - pfirmware->status = FW_STATUS_1_MOVE_BOOT_CODE;
> + priv->firmware->status = FW_STATUS_1_MOVE_BOOT_CODE;
> break;
>
> case FW_INIT_STEP1_MAIN:
> - pfirmware->status = FW_STATUS_2_MOVE_MAIN_CODE;
> + priv->firmware->status = FW_STATUS_2_MOVE_MAIN_CODE;
>
> rt_status = _rtl92e_fw_boot_cpu(dev);
> if (rt_status)
> - pfirmware->status = FW_STATUS_3_TURNON_CPU;
> + priv->firmware->status = FW_STATUS_3_TURNON_CPU;
> else
> netdev_dbg(dev, "_rtl92e_fw_boot_cpu fail!\n");
>
> break;
>
> case FW_INIT_STEP2_DATA:
> - pfirmware->status = FW_STATUS_4_MOVE_DATA_CODE;
> + priv->firmware->status = FW_STATUS_4_MOVE_DATA_CODE;
> mdelay(1);
>
> rt_status = _rtl92e_wait_for_fw(dev, CPU_GEN_FIRM_RDY, 20);
> if (rt_status)
> - pfirmware->status = FW_STATUS_5_READY;
> + priv->firmware->status = FW_STATUS_5_READY;
> break;
> default:
> rt_status = false;
> @@ -134,22 +133,20 @@ bool rtl92e_init_fw(struct net_device *dev)
> enum opt_rst_type rst_opt = OPT_SYSTEM_RESET;
> enum firmware_init_step starting_state = FW_INIT_STEP0_BOOT;
>
> - struct rt_firmware *pfirmware = priv->pFirmware;
> -
> netdev_dbg(dev, " PlatformInitFirmware()==>\n");
>
> - if (pfirmware->status == FW_STATUS_0_INIT) {
> + if (priv->firmware->status == FW_STATUS_0_INIT) {
> rst_opt = OPT_SYSTEM_RESET;
> starting_state = FW_INIT_STEP0_BOOT;
>
> - } else if (pfirmware->status == FW_STATUS_5_READY) {
> + } else if (priv->firmware->status == FW_STATUS_5_READY) {
> rst_opt = OPT_FIRMWARE_RESET;
> starting_state = FW_INIT_STEP2_DATA;
> }
>
> for (i = starting_state; i <= FW_INIT_STEP2_DATA; i++) {
> if (rst_opt == OPT_SYSTEM_RESET) {
> - if (pfirmware->blobs[i].size == 0) {
> + if (priv->firmware->blobs[i].size == 0) {
> const char *fw_name[3] = {
> RTL8192E_BOOT_IMG_FW,
> RTL8192E_MAIN_IMG_FW,
> @@ -161,15 +158,15 @@ bool rtl92e_init_fw(struct net_device *dev)
> pad = 128;
>
> if (!_rtl92e_fw_prepare(dev,
> - &pfirmware->blobs[i],
> + &priv->firmware->blobs[i],
> fw_name[i],
> pad))
> goto download_firmware_fail;
> }
> }
>
> - mapped_file = pfirmware->blobs[i].data;
> - file_length = pfirmware->blobs[i].size;
> + mapped_file = priv->firmware->blobs[i].data;
> + file_length = priv->firmware->blobs[i].size;
>
> rt_status = rtl92e_send_cmd_pkt(dev, DESC_PACKET_TYPE_INIT,
> mapped_file, file_length);
> diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
> index 671fe547639b..94e8f0706ed4 100644
> --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
> +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
> @@ -907,8 +907,8 @@ static void _rtl92e_init_priv_variable(struct net_device *dev)
>
> priv->card_type = PCI;
>
> - priv->pFirmware = vzalloc(sizeof(struct rt_firmware));
> - if (!priv->pFirmware)
> + priv->firmware = vzalloc(sizeof(*priv->firmware));
> + if (!priv->firmware)
> netdev_err(dev,
> "rtl8192e: Unable to allocate space for firmware\n");
>
> @@ -2409,8 +2409,8 @@ static void _rtl92e_pci_disconnect(struct pci_dev *pdev)
> priv->polling_timer_on = 0;
> _rtl92e_down(dev, true);
> rtl92e_dm_deinit(dev);
> - vfree(priv->pFirmware);
> - priv->pFirmware = NULL;
> + vfree(priv->firmware);
> + priv->firmware = NULL;
> _rtl92e_free_rx_ring(dev);
> for (i = 0; i < MAX_TX_QUEUE_COUNT; i++)
> _rtl92e_free_tx_ring(dev, i);
> diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
> index 093887bcd463..dba789f0c9e6 100644
> --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
> +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
> @@ -343,7 +343,7 @@ struct r8192_priv {
>
> enum acm_method AcmMethod;
>
> - struct rt_firmware *pFirmware;
> + struct rt_firmware *firmware;
> enum rtl819x_loopback LoopbackMode;
>
> struct timer_list watch_dog_timer;
A simple connection test works.
This patch cannot be applied on top of my 10 series patch send earlier.
Sorry for that.
Tested-by: Philipp Hortmann <[email protected]>