The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
.../boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
index 0062667c4f65..c9e84db0831a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -30,7 +30,7 @@ &sd_emmc_b {
&uart_B {
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 995ce10d5c81..08c33ec7e9f1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -369,7 +369,7 @@ &uart_A {
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 0a6a12808568..4b8db872bbf3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -487,7 +487,7 @@ &uart_A {
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
--
2.34.1
Hi!
24/11/2023 12.47, Krzysztof Kozlowski wrote:
> The DTS code coding style expects exactly one space before and after '='
> sign.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> .../boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
> index 0062667c4f65..c9e84db0831a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
> @@ -30,7 +30,7 @@ &sd_emmc_b {
> &uart_B {
> bluetooth {
> compatible = "realtek,rtl8822cs-bt";
> - enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
> host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
> device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> index 995ce10d5c81..08c33ec7e9f1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> @@ -369,7 +369,7 @@ &uart_A {
>
> bluetooth {
> compatible = "realtek,rtl8822cs-bt";
> - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
> device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> index 0a6a12808568..4b8db872bbf3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> @@ -487,7 +487,7 @@ &uart_A {
>
> bluetooth {
> compatible = "realtek,rtl8822cs-bt";
> - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
> device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
> };
Reviewed-by: Viacheslav Bocharov<[email protected]>
Hi,
On Fri, 24 Nov 2023 10:47:00 +0100, Krzysztof Kozlowski wrote:
> The DTS code coding style expects exactly one space before and after '='
> sign.
>
>
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.8/arm64-dt)
[1/1] arm64: dts: amlogic: minor whitespace cleanup around '='
https://git.kernel.org/amlogic/c/35b47cefe8955f4c34fe45e5a06cb3376d6a8aa6
These changes has been applied on the intermediate git tree [1].
The v6.8/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.
In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].
The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.
If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
--
Neil