This patchset adds support of STM32 SAI and I2S on stm32mp157c
Olivier Moysan (4):
ARM: dts: stm32: add sai support on stm32mp157c
ARM: dts: stm32: add sai pins muxing on stm32mp157
ARM: dts: stm32: add i2s support on stm32mp157c
ARM: dts: stm32: add i2s pins muxing on stm32mp157
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 92 +++++++++++++++++
arch/arm/boot/dts/stm32mp157c.dtsi | 158 ++++++++++++++++++++++++++++++
2 files changed, 250 insertions(+)
--
2.7.4
This patch adds support of STM32 I2S on stm32mp157c.
Signed-off-by: Olivier Moysan <[email protected]>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 9ae40240f635..ec2d6475caa2 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -365,6 +365,17 @@
status = "disabled";
};
+ i2s2: audio-controller@4000b000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 39 0x400 0x01>,
+ <&dmamux1 40 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
spi3: spi@4000c000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -379,6 +390,17 @@
status = "disabled";
};
+ i2s3: audio-controller@4000c000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x4000c000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 61 0x400 0x01>,
+ <&dmamux1 62 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
spdifrx: audio-controller@4000d000 {
compatible = "st,stm32h7-spdifrx";
#sound-dai-cells = <0>;
@@ -607,6 +629,17 @@
status = "disabled";
};
+ i2s1: audio-controller@44004000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x44004000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 37 0x400 0x01>,
+ <&dmamux1 38 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
spi4: spi@44005000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
Add I2S pins muxing to stm32mp157.
Signed-off-by: Olivier Moysan <[email protected]>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 6ea9b9ff45e7..e29bf7a2c18a 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -276,6 +276,25 @@
};
};
+ i2s2_pins_a: i2s2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+ <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ i2s2_pins_sleep_a: i2s2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+ };
+ };
+
ltdc_pins_a: ltdc-a-0 {
pins {
pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
--
2.7.4
This patch adds support of STM32 SAI on stm32mp157c.
Signed-off-by: Olivier Moysan <[email protected]>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 125 +++++++++++++++++++++++++++++++++++++
1 file changed, 125 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 2afeee65c3ea..9ae40240f635 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -708,6 +708,100 @@
status = "disabled";
};
+ sai1: sai@4400a000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400a000 0x400>;
+ reg = <0x4400a000 0x4>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI1_R>;
+ status = "disabled";
+
+ sai1a: audio-controller@4400a004 {
+ #sound-dai-cells = <0>;
+
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x1c>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 87 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai1b: audio-controller@4400a024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x1c>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 88 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
+ sai2: sai@4400b000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400b000 0x400>;
+ reg = <0x4400b000 0x4>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI2_R>;
+ status = "disabled";
+
+ sai2a: audio-controller@4400b004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x1c>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 89 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai2b: audio-controller@4400b024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x1c>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 90 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
+ sai3: sai@4400c000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400c000 0x400>;
+ reg = <0x4400c000 0x4>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI3_R>;
+ status = "disabled";
+
+ sai3a: audio-controller@4400c004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x04 0x1c>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 113 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai3b: audio-controller@4400c024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x1c>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 114 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
dfsdm: dfsdm@4400d000 {
compatible = "st,stm32mp1-dfsdm";
reg = <0x4400d000 0x800>;
@@ -1020,6 +1114,37 @@
status = "disabled";
};
+ sai4: sai@50027000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50027000 0x400>;
+ reg = <0x50027000 0x4>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI4_R>;
+ status = "disabled";
+
+ sai4a: audio-controller@50027004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x04 0x1c>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 99 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai4b: audio-controller@50027024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x1c>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 100 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
dts: thermal@50028000 {
compatible = "st,stm32-thermal";
reg = <0x50028000 0x100>;
--
2.7.4
Add SAI pins muxing to stm32mp157.
Signed-off-by: Olivier Moysan <[email protected]>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 73 +++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 85c417d9983b..6ea9b9ff45e7 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -506,6 +506,79 @@
};
};
+ sai2a_pins_a: sai2a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+ <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+ <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai2a_sleep_pins_a: sai2a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+ <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+ <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+ };
+ };
+
+ sai2b_pins_a: sai2b-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+ <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_a: sai2b-1 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+ <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+ };
+ };
+
+ sai2b_pins_b: sai2b-2 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_b: sai2b-3 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+ };
+ };
+
+ sai4a_pins_a: sai4a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai4a_sleep_pins_a: sai4a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+ };
+ };
+
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
--
2.7.4
Hi Olivier
On 4/25/19 4:10 PM, Olivier Moysan wrote:
> This patchset adds support of STM32 SAI and I2S on stm32mp157c
>
> Olivier Moysan (4):
> ARM: dts: stm32: add sai support on stm32mp157c
> ARM: dts: stm32: add sai pins muxing on stm32mp157
> ARM: dts: stm32: add i2s support on stm32mp157c
> ARM: dts: stm32: add i2s pins muxing on stm32mp157
>
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 92 +++++++++++++++++
> arch/arm/boot/dts/stm32mp157c.dtsi | 158 ++++++++++++++++++++++++++++++
> 2 files changed, 250 insertions(+)
>
Series applied on stm32-next.
Regards
Alex