Hi Pavel,
At 11/09/2017 11:02 AM, Pavel Tatashin wrote:
> This patch adds early clock feature to x86 platforms.
>
> tsc_early_init():
> Determines offset, shift and multiplier for the early clock based on the
> TSC frequency.
>
> tsc_early_fini()
> Implement the finish part of early tsc feature, prints message about the
> offset, which can be useful to find out how much time was spent in post and
> boot manager (if TSC starts from 0 during boot)
>
> sched_clock_early():
> TSC based implementation of early clock and is called from sched_clock().
>
> Call tsc_early_init() to initialize early boot time stamps functionality on
> the supported x86 platforms, and call tsc_early_fini() to finish this
> feature after permanent clock has been initialized. The supported x86
> systems are those where TSC frequency is determined early in boot.
>
> Signed-off-by: Pavel Tatashin <[email protected]>
> ---
> arch/x86/include/asm/paravirt.h | 2 +-
> arch/x86/kernel/tsc.c | 85 +++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 86 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
> index 283efcaac8af..b4ba220163ce 100644
> --- a/arch/x86/include/asm/paravirt.h
> +++ b/arch/x86/include/asm/paravirt.h
> @@ -171,7 +171,7 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
>
> static inline unsigned long long paravirt_sched_clock(void)
> {
> - return PVOP_CALL0(unsigned long long, pv_time_ops.sched_clock);
> + return PVOP_CALL0(unsigned long long, pv_time_ops.active_sched_clock);
> }
>
Should in the 5th patch
> struct static_key;
> diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
> index dbce6fa32aa9..24da1ff96481 100644
> --- a/arch/x86/kernel/tsc.c
> +++ b/arch/x86/kernel/tsc.c
> @@ -181,6 +181,80 @@ static void set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_
> local_irq_restore(flags);
> }
>
> +#ifdef CONFIG_X86_TSC
> +static struct cyc2ns_data cyc2ns_early;
> +
> +static u64 sched_clock_early(void)
> +{
> + u64 ns = mul_u64_u32_shr(rdtsc(), cyc2ns_early.cyc2ns_mul,
> + cyc2ns_early.cyc2ns_shift);
> + return ns + cyc2ns_early.cyc2ns_offset;
> +}
> +
> +#ifdef CONFIG_PARAVIRT
> +static inline void __init tsc_early_enable(void)
> +{
> + pv_time_ops.active_sched_clock = sched_clock_early;
> +}
> +
> +static inline void __init tsc_early_disable(void)
> +{
> + pv_time_ops.active_sched_clock = pv_time_ops.sched_clock;
> +}
> +#else /* CONFIG_PARAVIRT */
> +/*
> + * For native clock we use two switches static and dynamic, the static switch is
> + * initially true, so we check the dynamic switch, which is initially false.
> + * Later when early clock is disabled, we can alter the static switch in order
> + * to avoid branch check on every sched_clock() call.
> + */
> +static bool __tsc_early;
> +static DEFINE_STATIC_KEY_TRUE(__tsc_early_static);
> +
> +static inline void __init tsc_early_enable(void)
> +{
> + __tsc_early = true;
> +}
> +
> +static inline void __init tsc_early_disable(void)
> +{
> + __tsc_early = false;
> + static_branch_disable(&__tsc_early_static);
> +}
> +#endif /* CONFIG_PARAVIRT */
> +
> +/*
> + * Initialize clock for early time stamps
> + */
> +static void __init tsc_early_init(unsigned int khz)
> +{
> + clocks_calc_mult_shift(&cyc2ns_early.cyc2ns_mul,
> + &cyc2ns_early.cyc2ns_shift,
> + khz, NSEC_PER_MSEC, 0);
> + cyc2ns_early.cyc2ns_offset = -sched_clock_early();
> + tsc_early_enable();
> +}
> +
> +static void __init tsc_early_fini(void)
> +{
> + unsigned long long t;
> + unsigned long r;
> +
> + /* We did not have early sched clock if multiplier is 0 */
> + if (cyc2ns_early.cyc2ns_mul == 0) {
> + tsc_early_disable();
> + return;
> + }
> +
> + t = -cyc2ns_early.cyc2ns_offset;
> + r = do_div(t, NSEC_PER_SEC);
> +
> + tsc_early_disable();
> + __sched_clock_offset = sched_clock_early() - sched_clock();
> + pr_info("sched clock early is finished, offset [%lld.%09lds]\n", t, r);
> +}
Add definitions for the situation of X86_TSC = no :
#else /* CONFIG_X86_TSC */
static inline void tsc_early_init(unsigned int khz) { }
static inline void tsc_early_fini(void) { }
> +#endif /* CONFIG_X86_TSC */
> +
> /*
> * Scheduler clock - returns current time in nanosec units.
> */
> @@ -193,6 +267,13 @@ u64 native_sched_clock(void)
> return cycles_2_ns(tsc_now);
> }
>
> +#if !defined(CONFIG_PARAVIRT) && defined(CONFIG_X86_TSC)
> + if (static_branch_unlikely(&__tsc_early_static)) {
> + if (__tsc_early)
> + return sched_clock_early();
> + }
> +#endif /* !CONFIG_PARAVIRT && CONFIG_X86_TSC */
> +
> /*
> * Fall back to jiffies if there's no TSC available:
> * ( But note that we still use it if the TSC is marked
> @@ -1274,6 +1355,7 @@ void __init tsc_early_delay_calibrate(void)
> lpj = tsc_khz * 1000;
> do_div(lpj, HZ);
> loops_per_jiffy = lpj;
> + tsc_early_init(tsc_khz);
> }
>
> void __init tsc_init(void)
> @@ -1283,6 +1365,7 @@ void __init tsc_init(void)
>
> if (!boot_cpu_has(X86_FEATURE_TSC)) {
> setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
> + tsc_early_fini();
According to tsc_early_delay_calibrate(), if
(!boot_cpu_has(X86_FEATURE_TSC || !tsc_khz ), tsc_early_init(tsc_khz)
will never be called, so here is redundant.
> return;
> }
>
> @@ -1302,6 +1385,7 @@ void __init tsc_init(void)
> if (!tsc_khz) {
> mark_tsc_unstable("could not calculate TSC khz");
> setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
> + tsc_early_fini();
ditto
> return;
> }
>
> @@ -1341,6 +1425,7 @@ void __init tsc_init(void)
> mark_tsc_unstable("TSCs unsynchronized");
>
> detect_art();
> + tsc_early_fini();
IMO, Just keep the finishing call here is enough.
BTW, seems you forgot to cc Peter Zijlstra <[email protected]> in
both V7 and V8 patchsets.
Thanks,
dou
> }
>
> #ifdef CONFIG_SMP
>
From 1583556111940303489@xxx Thu Nov 09 03:06:32 +0000 2017
X-GM-THRID: 1582976236433299239
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread