Hi Christophe,
On Mon, 21 Mar 2022, Finn Thain wrote:
> On Mon, 21 Mar 2022, Christophe Leroy wrote:
>
> > Le 19/03/2022 à 08:20, Finn Thain a écrit :
> > > drivers/macintosh/via-pmu.c:897:12: warning: 'pmu_battery_proc_show' defined but not used [-Wunused-function]
> > > static int pmu_battery_proc_show(struct seq_file *m, void *v)
> > > ^~~~~~~~~~~~~~~~~~~~~
> > > drivers/macintosh/via-pmu.c:871:12: warning: 'pmu_irqstats_proc_show' defined but not used [-Wunused-function]
> > > static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
> > > ^~~~~~~~~~~~~~~~~~~~~~
> > > drivers/macintosh/via-pmu.c:860:12: warning: 'pmu_info_proc_show' defined but not used [-Wunused-function]
> > > static int pmu_info_proc_show(struct seq_file *m, void *v)
> > > ^~~~~~~~~~~~~~~~~~
> > >
> > > Rearrange some code and add some #ifdefs to avoid unused code warnings
> > > when CONFIG_PROC_FS is disabled.
> >
> > Why not just put those three functions inside an #ifdef CONFIG_PROC_FS ?
> >
>
> You'd get a warning about the prototypes ("declared static but never
> defined"). Rather than add an ifdef around the prototypes as well, I
> just reordered things a little.
Oops, I was forgetting that I also added an ifdef around the new
prototype.
The simplest solution is probably the patch below, as it better exploits
the stubbed-out proc_* API in include/linux/proc_fs.h.
Was this what you had in mind?
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 2109129ea1bb..495fd35b11de 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -204,9 +204,11 @@ static int init_pmu(void);
static void pmu_start(void);
static irqreturn_t via_pmu_interrupt(int irq, void *arg);
static irqreturn_t gpio1_interrupt(int irq, void *arg);
+#ifdef CONFIG_PROC_FS
static int pmu_info_proc_show(struct seq_file *m, void *v);
static int pmu_irqstats_proc_show(struct seq_file *m, void *v);
static int pmu_battery_proc_show(struct seq_file *m, void *v);
+#endif
static void pmu_pass_intr(unsigned char *data, int len);
static const struct proc_ops pmu_options_proc_ops;
@@ -857,6 +859,7 @@ query_battery_state(void)
2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
}
+#ifdef CONFIG_PROC_FS
static int pmu_info_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
@@ -977,6 +980,7 @@ static const struct proc_ops pmu_options_proc_ops = {
.proc_release = single_release,
.proc_write = pmu_options_proc_write,
};
+#endif
#ifdef CONFIG_ADB
/* Send an ADB command */
Le 21/03/2022 à 09:50, Finn Thain a écrit :
> Hi Christophe,
>
> On Mon, 21 Mar 2022, Finn Thain wrote:
>
>> On Mon, 21 Mar 2022, Christophe Leroy wrote:
>>
>>> Le 19/03/2022 à 08:20, Finn Thain a écrit :
>>>> drivers/macintosh/via-pmu.c:897:12: warning: 'pmu_battery_proc_show' defined but not used [-Wunused-function]
>>>> static int pmu_battery_proc_show(struct seq_file *m, void *v)
>>>> ^~~~~~~~~~~~~~~~~~~~~
>>>> drivers/macintosh/via-pmu.c:871:12: warning: 'pmu_irqstats_proc_show' defined but not used [-Wunused-function]
>>>> static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
>>>> ^~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/macintosh/via-pmu.c:860:12: warning: 'pmu_info_proc_show' defined but not used [-Wunused-function]
>>>> static int pmu_info_proc_show(struct seq_file *m, void *v)
>>>> ^~~~~~~~~~~~~~~~~~
>>>>
>>>> Rearrange some code and add some #ifdefs to avoid unused code warnings
>>>> when CONFIG_PROC_FS is disabled.
>>>
>>> Why not just put those three functions inside an #ifdef CONFIG_PROC_FS ?
>>>
>>
>> You'd get a warning about the prototypes ("declared static but never
>> defined"). Rather than add an ifdef around the prototypes as well, I
>> just reordered things a little.
>
> Oops, I was forgetting that I also added an ifdef around the new
> prototype.
>
> The simplest solution is probably the patch below, as it better exploits
> the stubbed-out proc_* API in include/linux/proc_fs.h.
>
> Was this what you had in mind?
Yes that's exactly what I had in mind.
Thanks
Christophe