2020-06-26 00:03:12

by Cristian Ciocaltea

[permalink] [raw]
Subject: [PATCH 02/10] arm: dts: owl-s500: Set UART clock refs from CMU

Enable using Clock Management Unit clocks for every UART node
of the Actions Semi S500 SoC.

Signed-off-by: Cristian Ciocaltea <[email protected]>
---
arch/arm/boot/dts/owl-s500.dtsi | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 5d5ad9db549b..ac3d04c75dd5 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -131,6 +131,7 @@ uart0: serial@b0120000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0120000 0x2000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART0>;
status = "disabled";
};

@@ -138,6 +139,7 @@ uart1: serial@b0122000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0122000 0x2000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART1>;
status = "disabled";
};

@@ -145,6 +147,7 @@ uart2: serial@b0124000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0124000 0x2000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART2>;
status = "disabled";
};

@@ -152,6 +155,7 @@ uart3: serial@b0126000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0126000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART3>;
status = "disabled";
};

@@ -159,6 +163,7 @@ uart4: serial@b0128000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0128000 0x2000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART4>;
status = "disabled";
};

@@ -166,6 +171,7 @@ uart5: serial@b012a000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb012a000 0x2000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART5>;
status = "disabled";
};

@@ -173,6 +179,7 @@ uart6: serial@b012c000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb012c000 0x2000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART6>;
status = "disabled";
};

--
2.27.0