They are appear to be spelling mistakes,
Initially identified in a codespell report and never been addressed so far.
./rtl8723b_phycfg.c:156: Threre ==> There, three
./rtl8723b_phycfg.c:283: Condig ==> Config
./rtl8723b_phycfg.c:328: Tranceiver ==> Transceiver
Signed-off-by: Bragatheswaran Manickavel <[email protected]>
---
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c b/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
index a3bff27af523..7764896a04ea 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
@@ -153,7 +153,7 @@ static u32 phy_RFSerialRead_8723B(
* @Data: The new register Data in the target bit position
* of the target to be read
*
- * .. Note:: Threre are three types of serial operations:
+ * .. Note:: There are three types of serial operations:
* 1. Software serial write
* 2. Hardware LSSI-Low Speed Serial Interface
* 3. Hardware HSSI-High speed
@@ -280,7 +280,7 @@ void PHY_SetRFReg_8723B(
/*-----------------------------------------------------------------------------
- * PHY_MACConfig8192C - Condig MAC by header file or parameter file.
+ * PHY_MACConfig8192C - Config MAC by header file or parameter file.
*
* Revised History:
* When Who Remark
@@ -325,7 +325,7 @@ static void phy_InitBBRFRegisterDefinition(struct adapter *Adapter)
pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; /* wire control parameter2 */
pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; /* wire control parameter2 */
- /* Tranceiver Readback LSSI/HSPI mode */
+ /* Transceiver Readback LSSI/HSPI mode */
pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;
--
2.34.1
On 20/09/23 00:35, Greg KH wrote:
> On Tue, Sep 19, 2023 at 09:31:48PM +0530, Bragatheswaran Manickavel wrote:
>> Gentle reminder !
> of what?
>
Sent this remainder for considering my patch.
>> On Sun, 17 Sept 2023 at 19:19, Bragatheswaran Manickavel <
>> [email protected]> wrote:
> You sent this 2 days ago, for a spelling fix? Please relax, there is
> obviously no rush.
>
> greg k-h
>
Actually, this was my first patch mail. Just want to make sure, the way
I sent the patch and other things are fine. Anyway thanks for your response
Thanks,
Bragathe
On 17/09/23 19:19, Bragatheswaran Manickavel wrote:
>They are appear to be spelling mistakes,
>Initially identified in a codespell report and never been addressed so
far.
>
>./rtl8723b_phycfg.c:156: Threre ==> There, three
>./rtl8723b_phycfg.c:283: Condig ==> Config
>./rtl8723b_phycfg.c:328: Tranceiver ==> Transceiver
>
>Signed-off-by: Bragatheswaran Manickavel <[email protected]>
>---
> drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
>diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
b/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
>index a3bff27af523..7764896a04ea 100644
>--- a/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
>+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
>@@ -153,7 +153,7 @@ static u32 phy_RFSerialRead_8723B(
> * @Data: The new register Data in the target bit position
> * of the target to be read
> *
>- * .. Note:: Threre are three types of serial operations:
>+ * .. Note:: There are three types of serial operations:
> * 1. Software serial write
> * 2. Hardware LSSI-Low Speed Serial Interface
> * 3. Hardware HSSI-High speed
>@@ -280,7 +280,7 @@ void PHY_SetRFReg_8723B(
>
>
>
/*-----------------------------------------------------------------------------
>- * PHY_MACConfig8192C - Condig MAC by header file or parameter file.
>+ * PHY_MACConfig8192C - Config MAC by header file or parameter file.
> *
> * Revised History:
> * When Who Remark
>@@ -325,7 +325,7 @@ static void phy_InitBBRFRegisterDefinition(struct
adapter *Adapter)
> pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 =
rFPGA0_XA_HSSIParameter2; /* wire control parameter2 */
> pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 =
rFPGA0_XB_HSSIParameter2; /* wire control parameter2 */
>
>- /* Tranceiver Readback LSSI/HSPI mode */
>+ /* Transceiver Readback LSSI/HSPI mode */
> pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack =
rFPGA0_XA_LSSIReadBack;
> pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack =
rFPGA0_XB_LSSIReadBack;
> pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi =
TransceiverA_HSPI_Readback;
>
Gentle remainder
Thanks,
Bragathe
On Tue, Sep 19, 2023 at 09:31:48PM +0530, Bragatheswaran Manickavel wrote:
> Gentle reminder !
of what?
> On Sun, 17 Sept 2023 at 19:19, Bragatheswaran Manickavel <
> [email protected]> wrote:
You sent this 2 days ago, for a spelling fix? Please relax, there is
obviously no rush.
greg k-h