Subject: General protection fault with use_blk_mq=1.

I am not subscribed to any of the lists on the To list here, please CC
me on any replies.

I am encountering a fairly consistent crash anywhere from 15 minutes to
12 hours after boot with scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1

The crash looks like:

[ 5466.075993] general protection fault: 0000 [#1] PREEMPT SMP PTI
[ 5466.075997] Modules linked in: esp4 xfrm4_mode_tunnel fuse usblp
uvcvideo pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O)
ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4
xt_conntrack nf_conntrack iptable_filter ip_tables x_tables intel_rapl
joydev serio_raw wmi_bmof iwldvm iwlwifi shpchp kvm_intel kvm irqbypass
autofs4 algif_skcipher nls_iso8859_1 nls_cp437 crc32_pclmul
ghash_clmulni_intel
[ 5466.076022] CPU: 3 PID: 10573 Comm: pool Tainted: G           O    
4.15.13-f1-dirty #148
[ 5466.076024] Hardware name: Hewlett-Packard HP EliteBook Folio
9470m/18DF, BIOS 68IBD Ver. F.44 05/22/2013
[ 5466.076029] RIP: 0010:percpu_counter_add_batch+0x2b/0xb0
[ 5466.076031] RSP: 0018:ffffa556c47afb58 EFLAGS: 00010002
[ 5466.076033] RAX: ffff95cda87ce018 RBX: ffff95cda87cdb68 RCX:
0000000000000000
[ 5466.076034] RDX: 000000003fffffff RSI: ffffffff896495c4 RDI:
ffffffff895b2bed
[ 5466.076036] RBP: 000000003fffffff R08: 0000000000000000 R09:
ffff95cb7d5f8148
[ 5466.076037] R10: 0000000000000200 R11: 0000000000000000 R12:
0000000000000001
[ 5466.076038] R13: ffff95cda87ce088 R14: ffff95cda6ebd100 R15:
ffffa556c47afc58
[ 5466.076040] FS:  00007f25f5305700(0000) GS:ffff95cdbeac0000(0000)
knlGS:0000000000000000
[ 5466.076042] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5466.076043] CR2: 00007f25e807e0a8 CR3: 00000003ed5a6001 CR4:
00000000001606e0
[ 5466.076044] Call Trace:
[ 5466.076050]  bfqg_stats_update_io_add+0x58/0x100
[ 5466.076055]  bfq_insert_requests+0xec/0xd80
[ 5466.076059]  ? blk_rq_append_bio+0x8f/0xa0
[ 5466.076061]  ? blk_rq_map_user_iov+0xc3/0x1d0
[ 5466.076065]  blk_mq_sched_insert_request+0xa3/0x130
[ 5466.076068]  blk_execute_rq+0x3a/0x50
[ 5466.076070]  sg_io+0x197/0x3e0
[ 5466.076073]  ? dput+0xca/0x210
[ 5466.076077]  ? mntput_no_expire+0x11/0x1a0
[ 5466.076079]  scsi_cmd_ioctl+0x289/0x400
[ 5466.076082]  ? filename_lookup+0xe1/0x170
[ 5466.076085]  sd_ioctl+0xc7/0x1a0
[ 5466.076088]  blkdev_ioctl+0x4d4/0x8c0
[ 5466.076091]  block_ioctl+0x39/0x40
[ 5466.076094]  do_vfs_ioctl+0x92/0x5e0
[ 5466.076097]  ? __fget+0x73/0xc0
[ 5466.076099]  SyS_ioctl+0x74/0x80
[ 5466.076102]  do_syscall_64+0x60/0x110
[ 5466.076106]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 5466.076109] RIP: 0033:0x7f25f75fef47
[ 5466.076110] RSP: 002b:00007f25f53049a8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 5466.076112] RAX: ffffffffffffffda RBX: 000000000000000c RCX:
00007f25f75fef47
[ 5466.076114] RDX: 00007f25f53049b0 RSI: 0000000000002285 RDI:
000000000000000c
[ 5466.076115] RBP: 0000000000000010 R08: 00007f25e8007818 R09:
0000000000000200
[ 5466.076116] R10: 0000000000000001 R11: 0000000000000246 R12:
0000000000000000
[ 5466.076118] R13: 0000000000000000 R14: 00007f25f8a6b5e0 R15:
00007f25e80173e0
[ 5466.076120] Code: 41 55 49 89 fd bf 01 00 00 00 41 54 49 89 f4 55 89
d5 53 e8 18 e1 bb ff 48 c7 c7 c4 95 64 89 e8 dc e9 fb ff 49 8b 45 20 48
63 d5 <65> 8b 18 48 63 db 4c 01 e3 48 39 d3 7d 0a f7 dd 48 63 ed 48 39
[ 5466.076147] RIP: percpu_counter_add_batch+0x2b/0xb0 RSP: ffffa556c47afb58
[ 5466.076149] ---[ end trace 8d7eb80aafef4494 ]---
[ 5466.670153] note: pool[10573] exited with preempt_count 2

(I only have the one instance right this minute as a result of not
having remote syslog setup before now.)

This is clearly deep in the blk_mq code, and it goes away when I remove
the use_blk_mq kernel command line parameters.

My next obvious step is to try and disable the load of the vbox modules.

I can include the full dmesg output if it would be helpful.

The system is an older HP Ultrabook, and the root partition is, sda1 (a
SSD) -> a LUKS encrypted partition -> LVM -> BTRFS.

The kernel is a stock 4.15.11, however I only recently added the blk_mq
options, so while I can state that I have seen this on multiple kernels
in the 4.15.x series, I have not tested earlier kernels in this
configuration.

Looking through the code, I'd guess that this is dying inside
blkg_rwstat_add, which calls percpu_counter_add_batch, which is what RIP
is pointing at.

Regards,
Zephaniah E. Loss-Cutler-Hull.



2018-03-29 01:03:57

by Jens Axboe

[permalink] [raw]
Subject: Re: General protection fault with use_blk_mq=1.

On 3/28/18 5:03 PM, Zephaniah E. Loss-Cutler-Hull wrote:
> I am not subscribed to any of the lists on the To list here, please CC
> me on any replies.
>
> I am encountering a fairly consistent crash anywhere from 15 minutes to
> 12 hours after boot with scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1>
> The crash looks like:
>
> [ 5466.075993] general protection fault: 0000 [#1] PREEMPT SMP PTI
> [ 5466.075997] Modules linked in: esp4 xfrm4_mode_tunnel fuse usblp
> uvcvideo pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O)
> ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4
> xt_conntrack nf_conntrack iptable_filter ip_tables x_tables intel_rapl
> joydev serio_raw wmi_bmof iwldvm iwlwifi shpchp kvm_intel kvm irqbypass
> autofs4 algif_skcipher nls_iso8859_1 nls_cp437 crc32_pclmul
> ghash_clmulni_intel
> [ 5466.076022] CPU: 3 PID: 10573 Comm: pool Tainted: G           O    
> 4.15.13-f1-dirty #148
> [ 5466.076024] Hardware name: Hewlett-Packard HP EliteBook Folio
> 9470m/18DF, BIOS 68IBD Ver. F.44 05/22/2013
> [ 5466.076029] RIP: 0010:percpu_counter_add_batch+0x2b/0xb0
> [ 5466.076031] RSP: 0018:ffffa556c47afb58 EFLAGS: 00010002
> [ 5466.076033] RAX: ffff95cda87ce018 RBX: ffff95cda87cdb68 RCX:
> 0000000000000000
> [ 5466.076034] RDX: 000000003fffffff RSI: ffffffff896495c4 RDI:
> ffffffff895b2bed
> [ 5466.076036] RBP: 000000003fffffff R08: 0000000000000000 R09:
> ffff95cb7d5f8148
> [ 5466.076037] R10: 0000000000000200 R11: 0000000000000000 R12:
> 0000000000000001
> [ 5466.076038] R13: ffff95cda87ce088 R14: ffff95cda6ebd100 R15:
> ffffa556c47afc58
> [ 5466.076040] FS:  00007f25f5305700(0000) GS:ffff95cdbeac0000(0000)
> knlGS:0000000000000000
> [ 5466.076042] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 5466.076043] CR2: 00007f25e807e0a8 CR3: 00000003ed5a6001 CR4:
> 00000000001606e0
> [ 5466.076044] Call Trace:
> [ 5466.076050]  bfqg_stats_update_io_add+0x58/0x100
> [ 5466.076055]  bfq_insert_requests+0xec/0xd80
> [ 5466.076059]  ? blk_rq_append_bio+0x8f/0xa0
> [ 5466.076061]  ? blk_rq_map_user_iov+0xc3/0x1d0
> [ 5466.076065]  blk_mq_sched_insert_request+0xa3/0x130
> [ 5466.076068]  blk_execute_rq+0x3a/0x50
> [ 5466.076070]  sg_io+0x197/0x3e0
> [ 5466.076073]  ? dput+0xca/0x210
> [ 5466.076077]  ? mntput_no_expire+0x11/0x1a0
> [ 5466.076079]  scsi_cmd_ioctl+0x289/0x400
> [ 5466.076082]  ? filename_lookup+0xe1/0x170
> [ 5466.076085]  sd_ioctl+0xc7/0x1a0
> [ 5466.076088]  blkdev_ioctl+0x4d4/0x8c0
> [ 5466.076091]  block_ioctl+0x39/0x40
> [ 5466.076094]  do_vfs_ioctl+0x92/0x5e0
> [ 5466.076097]  ? __fget+0x73/0xc0
> [ 5466.076099]  SyS_ioctl+0x74/0x80
> [ 5466.076102]  do_syscall_64+0x60/0x110
> [ 5466.076106]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
> [ 5466.076109] RIP: 0033:0x7f25f75fef47
> [ 5466.076110] RSP: 002b:00007f25f53049a8 EFLAGS: 00000246 ORIG_RAX:
> 0000000000000010
> [ 5466.076112] RAX: ffffffffffffffda RBX: 000000000000000c RCX:
> 00007f25f75fef47
> [ 5466.076114] RDX: 00007f25f53049b0 RSI: 0000000000002285 RDI:
> 000000000000000c
> [ 5466.076115] RBP: 0000000000000010 R08: 00007f25e8007818 R09:
> 0000000000000200
> [ 5466.076116] R10: 0000000000000001 R11: 0000000000000246 R12:
> 0000000000000000
> [ 5466.076118] R13: 0000000000000000 R14: 00007f25f8a6b5e0 R15:
> 00007f25e80173e0
> [ 5466.076120] Code: 41 55 49 89 fd bf 01 00 00 00 41 54 49 89 f4 55 89
> d5 53 e8 18 e1 bb ff 48 c7 c7 c4 95 64 89 e8 dc e9 fb ff 49 8b 45 20 48
> 63 d5 <65> 8b 18 48 63 db 4c 01 e3 48 39 d3 7d 0a f7 dd 48 63 ed 48 39
> [ 5466.076147] RIP: percpu_counter_add_batch+0x2b/0xb0 RSP: ffffa556c47afb58
> [ 5466.076149] ---[ end trace 8d7eb80aafef4494 ]---
> [ 5466.670153] note: pool[10573] exited with preempt_count 2
>
> (I only have the one instance right this minute as a result of not
> having remote syslog setup before now.)
>
> This is clearly deep in the blk_mq code, and it goes away when I remove
> the use_blk_mq kernel command line parameters.
>
> My next obvious step is to try and disable the load of the vbox modules.
>
> I can include the full dmesg output if it would be helpful.
>
> The system is an older HP Ultrabook, and the root partition is, sda1 (a
> SSD) -> a LUKS encrypted partition -> LVM -> BTRFS.
>
> The kernel is a stock 4.15.11, however I only recently added the blk_mq
> options, so while I can state that I have seen this on multiple kernels
> in the 4.15.x series, I have not tested earlier kernels in this
> configuration.
>
> Looking through the code, I'd guess that this is dying inside
> blkg_rwstat_add, which calls percpu_counter_add_batch, which is what RIP
> is pointing at.

Leaving the whole thing here for Paolo - it's crashing off insertion of
a request coming out of SG_IO. Don't think we've seen this BFQ failure
case before.

You can mitigate this by switching the scsi-mq devices to mq-deadline
instead.

--
Jens Axboe


Subject: Re: General protection fault with use_blk_mq=1.

On 03/28/2018 06:02 PM, Jens Axboe wrote:
> On 3/28/18 5:03 PM, Zephaniah E. Loss-Cutler-Hull wrote:
>> I am not subscribed to any of the lists on the To list here, please CC
>> me on any replies.
>>
>> I am encountering a fairly consistent crash anywhere from 15 minutes to
>> 12 hours after boot with scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1>
>> The crash looks like:
>>

>>
>> Looking through the code, I'd guess that this is dying inside
>> blkg_rwstat_add, which calls percpu_counter_add_batch, which is what RIP
>> is pointing at.
>
> Leaving the whole thing here for Paolo - it's crashing off insertion of
> a request coming out of SG_IO. Don't think we've seen this BFQ failure
> case before.
>
> You can mitigate this by switching the scsi-mq devices to mq-deadline
> instead.
>

I'm thinking that I should also be able to mitigate it by disabling
CONFIG_DEBUG_BLK_CGROUP.

That should remove that entire chunk of code.

Of course, that won't help if this is actually a symptom of a bigger
problem.

Regards,
Zephaniah E. Loss-Cutler-Hull.


Attachments:
signature.asc (836.00 B)
OpenPGP digital signature

2018-03-29 03:24:05

by Jens Axboe

[permalink] [raw]
Subject: Re: General protection fault with use_blk_mq=1.

On 3/28/18 9:13 PM, Zephaniah E. Loss-Cutler-Hull wrote:
> On 03/28/2018 06:02 PM, Jens Axboe wrote:
>> On 3/28/18 5:03 PM, Zephaniah E. Loss-Cutler-Hull wrote:
>>> I am not subscribed to any of the lists on the To list here, please CC
>>> me on any replies.
>>>
>>> I am encountering a fairly consistent crash anywhere from 15 minutes to
>>> 12 hours after boot with scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1>
>>> The crash looks like:
>>>
>
>>>
>>> Looking through the code, I'd guess that this is dying inside
>>> blkg_rwstat_add, which calls percpu_counter_add_batch, which is what RIP
>>> is pointing at.
>>
>> Leaving the whole thing here for Paolo - it's crashing off insertion of
>> a request coming out of SG_IO. Don't think we've seen this BFQ failure
>> case before.
>>
>> You can mitigate this by switching the scsi-mq devices to mq-deadline
>> instead.
>>
>
> I'm thinking that I should also be able to mitigate it by disabling
> CONFIG_DEBUG_BLK_CGROUP.
>
> That should remove that entire chunk of code.
>
> Of course, that won't help if this is actually a symptom of a bigger
> problem.

Yes, it's not a given that it will fully mask the issue at hand. But
turning off BFQ has a much higher chance of working for you.

This time actually CC'ing Paolo.


--
Jens Axboe


2018-03-29 04:57:21

by Paolo Valente

[permalink] [raw]
Subject: Re: General protection fault with use_blk_mq=1.



> Il giorno 29 mar 2018, alle ore 03:02, Jens Axboe <[email protected]> ha scritto:
>
> On 3/28/18 5:03 PM, Zephaniah E. Loss-Cutler-Hull wrote:
>> I am not subscribed to any of the lists on the To list here, please CC
>> me on any replies.
>>
>> I am encountering a fairly consistent crash anywhere from 15 minutes to
>> 12 hours after boot with scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1>
>> The crash looks like:
>>
>> [ 5466.075993] general protection fault: 0000 [#1] PREEMPT SMP PTI
>> [ 5466.075997] Modules linked in: esp4 xfrm4_mode_tunnel fuse usblp
>> uvcvideo pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O)
>> ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4
>> xt_conntrack nf_conntrack iptable_filter ip_tables x_tables intel_rapl
>> joydev serio_raw wmi_bmof iwldvm iwlwifi shpchp kvm_intel kvm irqbypass
>> autofs4 algif_skcipher nls_iso8859_1 nls_cp437 crc32_pclmul
>> ghash_clmulni_intel
>> [ 5466.076022] CPU: 3 PID: 10573 Comm: pool Tainted: G O
>> 4.15.13-f1-dirty #148
>> [ 5466.076024] Hardware name: Hewlett-Packard HP EliteBook Folio
>> 9470m/18DF, BIOS 68IBD Ver. F.44 05/22/2013
>> [ 5466.076029] RIP: 0010:percpu_counter_add_batch+0x2b/0xb0
>> [ 5466.076031] RSP: 0018:ffffa556c47afb58 EFLAGS: 00010002
>> [ 5466.076033] RAX: ffff95cda87ce018 RBX: ffff95cda87cdb68 RCX:
>> 0000000000000000
>> [ 5466.076034] RDX: 000000003fffffff RSI: ffffffff896495c4 RDI:
>> ffffffff895b2bed
>> [ 5466.076036] RBP: 000000003fffffff R08: 0000000000000000 R09:
>> ffff95cb7d5f8148
>> [ 5466.076037] R10: 0000000000000200 R11: 0000000000000000 R12:
>> 0000000000000001
>> [ 5466.076038] R13: ffff95cda87ce088 R14: ffff95cda6ebd100 R15:
>> ffffa556c47afc58
>> [ 5466.076040] FS: 00007f25f5305700(0000) GS:ffff95cdbeac0000(0000)
>> knlGS:0000000000000000
>> [ 5466.076042] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 5466.076043] CR2: 00007f25e807e0a8 CR3: 00000003ed5a6001 CR4:
>> 00000000001606e0
>> [ 5466.076044] Call Trace:
>> [ 5466.076050] bfqg_stats_update_io_add+0x58/0x100
>> [ 5466.076055] bfq_insert_requests+0xec/0xd80
>> [ 5466.076059] ? blk_rq_append_bio+0x8f/0xa0
>> [ 5466.076061] ? blk_rq_map_user_iov+0xc3/0x1d0
>> [ 5466.076065] blk_mq_sched_insert_request+0xa3/0x130
>> [ 5466.076068] blk_execute_rq+0x3a/0x50
>> [ 5466.076070] sg_io+0x197/0x3e0
>> [ 5466.076073] ? dput+0xca/0x210
>> [ 5466.076077] ? mntput_no_expire+0x11/0x1a0
>> [ 5466.076079] scsi_cmd_ioctl+0x289/0x400
>> [ 5466.076082] ? filename_lookup+0xe1/0x170
>> [ 5466.076085] sd_ioctl+0xc7/0x1a0
>> [ 5466.076088] blkdev_ioctl+0x4d4/0x8c0
>> [ 5466.076091] block_ioctl+0x39/0x40
>> [ 5466.076094] do_vfs_ioctl+0x92/0x5e0
>> [ 5466.076097] ? __fget+0x73/0xc0
>> [ 5466.076099] SyS_ioctl+0x74/0x80
>> [ 5466.076102] do_syscall_64+0x60/0x110
>> [ 5466.076106] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
>> [ 5466.076109] RIP: 0033:0x7f25f75fef47
>> [ 5466.076110] RSP: 002b:00007f25f53049a8 EFLAGS: 00000246 ORIG_RAX:
>> 0000000000000010
>> [ 5466.076112] RAX: ffffffffffffffda RBX: 000000000000000c RCX:
>> 00007f25f75fef47
>> [ 5466.076114] RDX: 00007f25f53049b0 RSI: 0000000000002285 RDI:
>> 000000000000000c
>> [ 5466.076115] RBP: 0000000000000010 R08: 00007f25e8007818 R09:
>> 0000000000000200
>> [ 5466.076116] R10: 0000000000000001 R11: 0000000000000246 R12:
>> 0000000000000000
>> [ 5466.076118] R13: 0000000000000000 R14: 00007f25f8a6b5e0 R15:
>> 00007f25e80173e0
>> [ 5466.076120] Code: 41 55 49 89 fd bf 01 00 00 00 41 54 49 89 f4 55 89
>> d5 53 e8 18 e1 bb ff 48 c7 c7 c4 95 64 89 e8 dc e9 fb ff 49 8b 45 20 48
>> 63 d5 <65> 8b 18 48 63 db 4c 01 e3 48 39 d3 7d 0a f7 dd 48 63 ed 48 39
>> [ 5466.076147] RIP: percpu_counter_add_batch+0x2b/0xb0 RSP: ffffa556c47afb58
>> [ 5466.076149] ---[ end trace 8d7eb80aafef4494 ]---
>> [ 5466.670153] note: pool[10573] exited with preempt_count 2
>>
>> (I only have the one instance right this minute as a result of not
>> having remote syslog setup before now.)
>>
>> This is clearly deep in the blk_mq code, and it goes away when I remove
>> the use_blk_mq kernel command line parameters.
>>
>> My next obvious step is to try and disable the load of the vbox modules.
>>
>> I can include the full dmesg output if it would be helpful.
>>
>> The system is an older HP Ultrabook, and the root partition is, sda1 (a
>> SSD) -> a LUKS encrypted partition -> LVM -> BTRFS.
>>
>> The kernel is a stock 4.15.11, however I only recently added the blk_mq
>> options, so while I can state that I have seen this on multiple kernels
>> in the 4.15.x series, I have not tested earlier kernels in this
>> configuration.
>>
>> Looking through the code, I'd guess that this is dying inside
>> blkg_rwstat_add, which calls percpu_counter_add_batch, which is what RIP
>> is pointing at.
>
> Leaving the whole thing here for Paolo - it's crashing off insertion of
> a request coming out of SG_IO. Don't think we've seen this BFQ failure
> case before.
>

Actually, we have. Found and reported by Ming about two months and a
half ago:
https://www.spinics.net/lists/linux-block/msg21422.html

Then it just disappeared with 4.16, and Ming moved on. This forced me
to abandon the problem, as I never succeeded in reproducing it.

Thanks,
Paolo

> You can mitigate this by switching the scsi-mq devices to mq-deadline
> instead.
>
> --
> Jens Axboe


2018-03-29 05:14:29

by Paolo Valente

[permalink] [raw]
Subject: Re: General protection fault with use_blk_mq=1.



> Il giorno 29 mar 2018, alle ore 05:22, Jens Axboe <[email protected]> ha scritto:
>
> On 3/28/18 9:13 PM, Zephaniah E. Loss-Cutler-Hull wrote:
>> On 03/28/2018 06:02 PM, Jens Axboe wrote:
>>> On 3/28/18 5:03 PM, Zephaniah E. Loss-Cutler-Hull wrote:
>>>> I am not subscribed to any of the lists on the To list here, please CC
>>>> me on any replies.
>>>>
>>>> I am encountering a fairly consistent crash anywhere from 15 minutes to
>>>> 12 hours after boot with scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1>
>>>> The crash looks like:
>>>>
>>
>>>>
>>>> Looking through the code, I'd guess that this is dying inside
>>>> blkg_rwstat_add, which calls percpu_counter_add_batch, which is what RIP
>>>> is pointing at.
>>>
>>> Leaving the whole thing here for Paolo - it's crashing off insertion of
>>> a request coming out of SG_IO. Don't think we've seen this BFQ failure
>>> case before.
>>>
>>> You can mitigate this by switching the scsi-mq devices to mq-deadline
>>> instead.
>>>
>>
>> I'm thinking that I should also be able to mitigate it by disabling
>> CONFIG_DEBUG_BLK_CGROUP.
>>
>> That should remove that entire chunk of code.
>>
>> Of course, that won't help if this is actually a symptom of a bigger
>> problem.
>
> Yes, it's not a given that it will fully mask the issue at hand. But
> turning off BFQ has a much higher chance of working for you.
>
> This time actually CC'ing Paolo.
>

Hi Zephaniah,
if you are actually interested in the benefits of BFQ (low latency,
high responsiveness, fairness, ...) then it may be worth to try what
you yourself suggest: disabling CONFIG_DEBUG_BLK_CGROUP. Also because
this option activates the heavy computation of debug cgroup statistics,
which probably you don't use.

In addition, the outcome of your attempt without
CONFIG_DEBUG_BLK_CGROUP would give us useful bisection information:
- if no failure occurs, then the issue is likely to be confined in
that debugging code (which, on the bright side, is likely to be of
occasional interest, for only a handful of developers)
- if the issue still shows up, then we may have new hints on this odd
failure

Finally, consider that this issue has been reported to disappear from
4.16 [1], and, as a plus, that the service quality of BFQ had a
further boost exactly from 4.16.

Looking forward to your feedback, in case you try BFQ without
CONFIG_DEBUG_BLK_CGROUP,
Paolo

[1] https://www.spinics.net/lists/linux-block/msg21422.html

>
> --
> Jens Axboe


Subject: Re: General protection fault with use_blk_mq=1.

On 03/28/2018 10:13 PM, Paolo Valente wrote:
>
>
>> Il giorno 29 mar 2018, alle ore 05:22, Jens Axboe <[email protected]> ha scritto:
>>
>> On 3/28/18 9:13 PM, Zephaniah E. Loss-Cutler-Hull wrote:
>>> On 03/28/2018 06:02 PM, Jens Axboe wrote:
>>>> On 3/28/18 5:03 PM, Zephaniah E. Loss-Cutler-Hull wrote:
>>>>> I am not subscribed to any of the lists on the To list here, please CC
>>>>> me on any replies.
>>>>>
>>>>> I am encountering a fairly consistent crash anywhere from 15 minutes to
>>>>> 12 hours after boot with scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1>
>>>>> The crash looks like:
>>>>>
>>>
>>>>>
>>>>> Looking through the code, I'd guess that this is dying inside
>>>>> blkg_rwstat_add, which calls percpu_counter_add_batch, which is what RIP
>>>>> is pointing at.
>>>>
>>>> Leaving the whole thing here for Paolo - it's crashing off insertion of
>>>> a request coming out of SG_IO. Don't think we've seen this BFQ failure
>>>> case before.
>>>>
>>>> You can mitigate this by switching the scsi-mq devices to mq-deadline
>>>> instead.
>>>>
>>>
>>> I'm thinking that I should also be able to mitigate it by disabling
>>> CONFIG_DEBUG_BLK_CGROUP.
>>>
>>> That should remove that entire chunk of code.
>>>
>>> Of course, that won't help if this is actually a symptom of a bigger
>>> problem.
>>
>> Yes, it's not a given that it will fully mask the issue at hand. But
>> turning off BFQ has a much higher chance of working for you.
>>
>> This time actually CC'ing Paolo.
>>
>
> Hi Zephaniah,
> if you are actually interested in the benefits of BFQ (low latency,
> high responsiveness, fairness, ...) then it may be worth to try what
> you yourself suggest: disabling CONFIG_DEBUG_BLK_CGROUP. Also because
> this option activates the heavy computation of debug cgroup statistics,
> which probably you don't use.

I definitely am.
>
> In addition, the outcome of your attempt without
> CONFIG_DEBUG_BLK_CGROUP would give us useful bisection information:
> - if no failure occurs, then the issue is likely to be confined in
> that debugging code (which, on the bright side, is likely to be of
> occasional interest, for only a handful of developers)
> - if the issue still shows up, then we may have new hints on this odd
> failure
>
> Finally, consider that this issue has been reported to disappear from
> 4.16 [1], and, as a plus, that the service quality of BFQ had a
> further boost exactly from 4.16.

I look forward to that either way then.
>
> Looking forward to your feedback, in case you try BFQ without
> CONFIG_DEBUG_BLK_CGROUP,

I'm running that now, judging from the past if it survives until
tomorrow evening then we're good, so I should hopefully know in the next
day.

Thank you,
Zephaniah E. Loss-Cutler-Hull.

> Paolo
>
> [1] https://www.spinics.net/lists/linux-block/msg21422.html
>
>>
>> --
>> Jens Axboe
>



Attachments:
signature.asc (836.00 B)
OpenPGP digital signature
Subject: Re: General protection fault with use_blk_mq=1.

On 03/29/2018 02:12 AM, Zephaniah E. Loss-Cutler-Hull wrote:
> On 03/28/2018 10:13 PM, Paolo Valente wrote:
>> In addition, the outcome of your attempt without
>> CONFIG_DEBUG_BLK_CGROUP would give us useful bisection information:
>> - if no failure occurs, then the issue is likely to be confined in
>> that debugging code (which, on the bright side, is likely to be of
>> occasional interest, for only a handful of developers)
>> - if the issue still shows up, then we may have new hints on this odd
>> failure
>>
>> Finally, consider that this issue has been reported to disappear from
>> 4.16 [1], and, as a plus, that the service quality of BFQ had a
>> further boost exactly from 4.16.
>
> I look forward to that either way then.
>>
>> Looking forward to your feedback, in case you try BFQ without
>> CONFIG_DEBUG_BLK_CGROUP,
>
> I'm running that now, judging from the past if it survives until
> tomorrow evening then we're good, so I should hopefully know in the next
> day.

Alright, I now have an uptime of over 20 hours, with
scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1

I did upgrade from 4.15.13 to 4.15.14 in the process, but a quick look
at the changes doesn't have anything jump out at me as impacting this.

So I'm reasonably comfortable stating that disabling
CONFIG_DEBUG_BLK_CGROUP was sufficient to render this stable.

Regards,
Zephaniah E. Loss-Cutler-Hull.