2023-05-12 06:36:36

by Bao D. Nguyen

Subject: [PATCH v5 1/7] ufs: core: Combine 32-bit command_desc_base_addr_lo/hi

The UTP command descriptor base address is a 57-bit field in the
UTP transfer request descriptor. Combine the two 32-bit
command_desc_base_addr_lo/hi fields into a 64-bit for better handling
of this field.

Signed-off-by: Bao D. Nguyen <[email protected]>
---
drivers/ufs/core/ufshcd.c | 6 ++----
include/ufs/ufshci.h | 6 ++----
2 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 9434328..5527d45 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -3875,10 +3875,8 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)
/* Configure UTRD with command descriptor base address */
cmd_desc_element_addr =
(cmd_desc_dma_addr + (cmd_desc_size * i));
- utrdlp[i].command_desc_base_addr_lo =
- cpu_to_le32(lower_32_bits(cmd_desc_element_addr));
- utrdlp[i].command_desc_base_addr_hi =
- cpu_to_le32(upper_32_bits(cmd_desc_element_addr));
+ utrdlp[i].command_desc_base_addr =
+ cpu_to_le64(cmd_desc_element_addr);

/* Response upiu and prdt offset should be in double words */
if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) {
diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
index 11424bb..7c5a76b 100644
--- a/include/ufs/ufshci.h
+++ b/include/ufs/ufshci.h
@@ -503,8 +503,7 @@ struct request_desc_header {
/**
* struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD)
* @header: UTRD header DW-0 to DW-3
- * @command_desc_base_addr_lo: UCD base address low DW-4
- * @command_desc_base_addr_hi: UCD base address high DW-5
+ * @command_desc_base_addr: UCD base address DW 4-5
* @response_upiu_length: response UPIU length DW-6
* @response_upiu_offset: response UPIU offset DW-6
* @prd_table_length: Physical region descriptor length DW-7
@@ -516,8 +515,7 @@ struct utp_transfer_req_desc {
struct request_desc_header header;

/* DW 4-5*/
- __le32 command_desc_base_addr_lo;
- __le32 command_desc_base_addr_hi;
+ __le64 command_desc_base_addr;

/* DW 6 */
__le16 response_upiu_length;
--
2.7.4

2023-05-19 23:12:25

by Bart Van Assche

Subject: Re: [PATCH v5 1/7] ufs: core: Combine 32-bit command_desc_base_addr_lo/hi

On 5/11/23 23:28, Bao D. Nguyen wrote:
> The UTP command descriptor base address is a 57-bit field in the
> UTP transfer request descriptor. Combine the two 32-bit
> command_desc_base_addr_lo/hi fields into a 64-bit for better handling
> of this field.

Reviewed-by: Bart Van Assche <[email protected]>