Upon booting my system, the boot fails and the following message is
displayed repeatedly:
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status eb01.
diagnostics: net 0cfa media 88c0 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 65(1) current 65(1)
Transmit list 00000000 vs d0c782a0
0: @d0c78200 length 8000002e status 8001002e
...
I also see the same message for eth2. I'd been happily booting this
2.6.8.1 kernel for months without trouble. I don't know where this is
coming from. The drivers for my three NICs are forcedeth, 3c59x, and
8139too. I'd be happy to give more information to help.
Please cc me in your reply. Cheers,
Shaun
On Thu, 21 Apr 2005 15:21:30 -0700 Shaun Jackman wrote:
| Upon booting my system, the boot fails and the following message is
| displayed repeatedly:
|
| NETDEV WATCHDOG: eth0: transmit timed out
| eth0: transmit timed out, tx_status 00 status eb01.
| diagnostics: net 0cfa media 88c0 dma 0000003a fifo 0000
| eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
| Flags; bus-master 1, dirty 65(1) current 65(1)
| Transmit list 00000000 vs d0c782a0
| 0: @d0c78200 length 8000002e status 8001002e
| ...
|
| I also see the same message for eth2. I'd been happily booting this
| 2.6.8.1 kernel for months without trouble. I don't know where this is
| coming from. The drivers for my three NICs are forcedeth, 3c59x, and
| 8139too. I'd be happy to give more information to help.
|
| Please cc me in your reply. Cheers,
| Shaun
Please see the REPORTING-BUGS file for what info to include
in a bug report. There's just too much info missing from
this one.
---
~Randy
Shaun Jackman wrote:
> Upon booting my system, the boot fails and the following message is
> displayed repeatedly:
>
> NETDEV WATCHDOG: eth0: transmit timed out
> eth0: transmit timed out, tx_status 00 status eb01.
> diagnostics: net 0cfa media 88c0 dma 0000003a fifo 0000
> eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
> Flags; bus-master 1, dirty 65(1) current 65(1)
> Transmit list 00000000 vs d0c782a0
> 0: @d0c78200 length 8000002e status 8001002e
> ...
>
> I also see the same message for eth2. I'd been happily booting this
> 2.6.8.1 kernel for months without trouble. I don't know where this is
> coming from. The drivers for my three NICs are forcedeth, 3c59x, and
> 8139too. I'd be happy to give more information to help.
If you're looking for general causes did you plug in any other devices,
on PCI or on USB/firewire? Add a disk, anything like that.
If you want real help you need to provide the usual information, see the
BUG REPORTS doc in the source in the Documentation directory as I recall.
--
-bill davidsen ([email protected])
"The secret to procrastination is to put things off until the
last possible moment - but no longer" -me